help finding tmobile 2.26 rom download.... - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've been trying some of the links to downloads and some don't work and the one that I did find worked and downloaded didn't upgrade my phone.
btw, i have a cingular 8125 that I cid/sim unlocked following the directions on one of the stickies here. I went as far as downgrading to 1.01 but now that I have to upgrade to the 2.26 I can't find something that works.
Can someone direct me to the right place.
your help is appreciated.

is your device a g3 or G4??????
Very important!!! Use Wizard service tool to find out first.
search here:
ftp://ftp.xda-developers.com/Wizard
did you also try IPL/SPL 3xx?? that might work just fine. also the radio I am using seems to work just fine too (don't remember where it is located anymore though)

Thanks for responding SVI!!
I have a g3
I tried the link in this guide http://forum.xda-developers.com/showthread.php?t=285435 but the link says that its a .rar file but when I download it it downloads as a efw file.
don't know if there is another link somewhere for the 3.8 rom upgrade.

Indira said:
Thanks for responding SVI!!
I have a g3
I tried the link in this guide http://forum.xda-developers.com/showthread.php?t=285435 but the link says that its a .rar file but when I download it it downloads as a efw file.
don't know if there is another link somewhere for the 3.8 rom upgrade.
Click to expand...
Click to collapse
did you try the rapidshare or the badongo link??
because the rapidshare has an exe extension for 226, and a rar extension for 308. I am downloading the 226exe rightnow from here:
http://rapidshare.com/files/38880130/ruu_prodigy_226102_22610105_022511_tmous_wwe_ship.exe

I tried that too and it still downloads as a efw file.

Indira said:
I tried that too and it still downloads as a efw file.
Click to expand...
Click to collapse
perhaps that is a problem with your pc. I don't know that extenson. In about 4 minutes I will let you know how it downloaded for me.

wow. I never thought it might be on my end...lol ok. thanks for helping me.

btw, i did try a cooked download from a link and I was able to download it fine but when i tried to flash it it didn't work. I mean it goes through all the steps but it just doesn't upgrade the phone.

Yes, I just finished downloading and it is an EXE.
Try using a different browser if you have one.
As far as your upgrading problem:
You have to run lockwiz twice. one for SIM one for CID each time you have to close lockwiz, and reset the phone.
don't be afraid to think outside of the box while reading direactions. analize what is what and why.
Happy flashing. (use the search button and the wiki frequently)

I was using mozilla but now I'm trying IE to see if I can download. If not I'll try from another computer tomorrow. I'm tired, my eyes hurt.....this is a lot of work.....thanks to all you developers out there!!

I just found this link and the rom is working good I just installed it and installed WM6 no prob so far..I was looking for some time and finally found this link...http://rapidshare.com/files/6521294/RUU_TMobile_US_226102_22610105_022511_WWE_Ship.exe

when yours downloaded did it do it as an .efw file. That's what happens to me. I'm trying on my mom's computer now and its doing the same thing.

Related

To change from GER to WWE will this work?

In my prev. post i was still struggling to find the detials of my phone. I have managed that but now i cannot find the right upgrade for WWE.
I decided to download the latest T-Mobile GER version and installed it. This works well i think. Would it now be ok to Download the T-Mobile version from T-Mobile UK (ie WWE version)? Naturally i would have to edit it before installing.
Please let me know soon! I need my MDA for work!!
Thanks
xummy111 said:
In my prev. post i was still struggling to find the detials of my phone. I have managed that but now i cannot find the right upgrade for WWE.
I decided to download the latest T-Mobile GER version and installed it. This works well i think. Would it now be ok to Download the T-Mobile version from T-Mobile UK (ie WWE version)? Naturally i would have to edit it before installing.
Please let me know soon! I need my MDA for work!!
Thanks
Click to expand...
Click to collapse
OK, you need to update your MDA3 to UK spec..? Assuming you're on the T-Mobile Network, you need to follow these steps..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
More so, as you're going to get the Country Code Error (as the MDA3 thinks it's German as opposed to WWE) then you'll need to pay particular attention to the statements at the bottom of the page.. I have pasted them for you..
Wiki said:
However, if you are installing a rom on a device other than that which it is meant for, you will get a Device ID error, so follow these steps:
First Method (Quick/Easy) (TYPE II)
Download update to desktop
Unrar or unzip all files in exe or rar into a new folder
Open the folder with the extracted files
Download this file: MaUpgradeUt_noID.ZIP
Extract MaUpgradeUt_noID.exe from this file and place it with the other upgrade files.
Run this new exe file instead of BaUpgradeUt.exe to update your rom
If you get an error the first time, run MaUpgradeUt_noID.exe again without touching your device (don't take it out from the cradle, don't reset it, don't touch it at all!)
Click to expand...
Click to collapse
Remember, you need to be sure you know what you're doing.. Be sure you read everything on Wiki (Link in Signature) and ask yourself "Am I sure I know all the information before I press the "Update" Botton..?
Finally, you can then update your Radio (if desired) to the latest 1.15 Spec from the 1.13 seen in this ROM.. But, one step at a time, eh..? :lol:
Let us know how you get on..
Cheers!
Thanks for the info MrPhilly,
Just to clarify matters, i am not on the T-mobile network but on the Go Mobile network in Malta.
Ill try following your insructions and let you know!
Cheers!!
MrPhilly,
Thanks very much!! It worked!! Ill see how i get along without further updates for now. As you said.....one step at a time!!
xummy111 said:
MrPhilly,
Thanks very much!! It worked!! Ill see how i get along without further updates for now. As you said.....one step at a time!!
Click to expand...
Click to collapse
Excellent - Glad to hear it worked..
Don't forget to update your settings from your Airtime supplier for the MMS, etc etc..
Have you tried to 1.15 Radio Stack Update..? What you could have done there was to replace the 1.13 Radio file with the 1.15 File and update everything at once.. However, like you say, one step at a time..
Im going to try updating the radio stack now so fingers crossed! thanks again

How do I downgrade from WM5 back to WM2003SE

Found 2003SE ugly but at least useable. WM5 just runs too slowly for me. Do I just need to follow the 1.42 Rom flash tutorial on the wiki to reflash my existing Rom or are there specific steps that need to be done beforehand?
I changed the EXT Rom to 128K as per instructions for WM5 installation will this affect any reversal process?
Thx.
Hi
Yes, you have to do it 'special' way.
Just tell me why haven't you found this wiki page ?
Follow the process carefully.
There are bunch of people stuck with improperly downgraded devices (no risk though... they simply don't know how to repair it)
Good luck
robal said:
Just tell me why haven't you found this wiki page ?
Click to expand...
Click to collapse
Stupidity I guess Thx for the link btw. Maybe I'll try the keyword "downgrade" in the find page box of Wiki
I found a problem on this page... this link http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades its not working for me. And I wat to download the official ROM for me SX66 (XGULA001)... Does anyone knows an alternative?
Dankan_ said:
I found a problem on this page... this link http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades its not working for me. And I wat to download the official ROM for me SX66 (XGULA001)... Does anyone knows an alternative?
Click to expand...
Click to collapse
The roms located at
ftp://ftp.xda-developers.com/BlueAn...ates/PH20B1_Siemens_13310_110_10210_WWE_SHIP/
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Dankan_ said:
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Click to expand...
Click to collapse
Just execute the .exe, if you are lucky you won't get any county or model errors, but I doubt it. If you get errors, you will need to follow the instructions by cdaly1970
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
the temp directory in XP is under is something like C:\Documents and Settings\Userid\Local Settings\Temp\xxxxx.tmp
rschell said:
Dankan_ said:
rschell Really thanks!
Justa one more question... It´s just put the device in boot loader mode and run this? My quetsion its becaus the ROM there is in .exe format...
Click to expand...
Click to collapse
Just execute the .exe, if you are lucky you won't get any county or model errors, but I doubt it. If you get errors, you will need to follow the instructions by cdaly1970
http://forum.xda-developers.com/viewtopic.php?p=233903#233903
the temp directory in XP is under is something like C:\Documents and Settings\Userid\Local Settings\Temp\xxxxx.tmp
Click to expand...
Click to collapse
If you use winrar you could extract that exe so you don't have to go to the temp dir
YESS !!! I think everythink is already on WIKI

im looking for : CUSTOM__RUU_Wizard_1050412_WWE_

hi all
i tried to download the file ftp://xda:[email protected]__RUU_Wizard_1050412_WWE_101_11210_WWE.exe from the unlockung topic then it failed
seems to be removed
somebody have please upload it on any server except rapidshare
like : http://www.quicksharing.com/
or http://www.up4world.com/
my device now unusefull , so please help me
thanx in advanced
http://download.yousendit.com/FF900F2908E9D05B
Thanks for the info.
Hi there everyone
Greetings from Paris
I encountered the same problem. The file was not there anylonger. Then I saw this post, and its reply. I downloaded the file on http://download.yousendit.com/FF900F2908E9D05B which worked fine.
I ran the CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe file.
So far so good, and then the process crashed at 98%. Something about a file in outlook. I started the whole process again, and now it just stalls at 98%. No error message. NOthing. Anybody have any idea what I should do now...
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Paul Bourbon said:
I have an Orange SPV 3000. I can put the new rom back but I wanted to do a cid unlock, before doing so. It seems to be necessary to be able to try out different roms...
Thanks.
Click to expand...
Click to collapse
I never have to downgrade before I do the CID unlocked. I've tried with two MDA and never encountered any problem. You will only need to downgrade if you CANNOT CID unlocked; otherwise, don't bother to downgrade.
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
When downgrading with this ROM...it will stall at 98% for a few minutes...be patient. To confirm that the ROM I posted was legit...I used it again myself and worked fine. Then to make sure it wasn't just me...I had 2 other people tell me they used it and worked fine for them as well.
Don't know what to tell you as this is the ROM that was hosted on the FTP site for a long time.
shell tool
If your having trouble flashing a rom the shell tool posted on the g4 threads lets you flash any rom you wish onto your phone i have a g4 cid locked and using the tool i can swap my roms every day if i wished to with no hassle
http://rapidshare.com/files/17787647/ShellTool_bugfixed.zip
Paul Bourbon said:
thats just the point. I cant do the cid unlock... And I suspect that the rom version has something to do with it. Anyway, thats what I read everywhere on this site. So I am still looking for a working link to Button 1.05 ?
Click to expand...
Click to collapse
Get yourself a signature. Is your Wizard G3 or G4.
I think that my wizard is a G3. I just added my signature.
Still looking for the mysterious file that apparently is no longer posted on this site.
thanks for any info.
i need a rapdishare or megauploads link to where i can download a 1.xx ROM for my G3 Qtek 9100 (Tmobile with imate 2.21 ROM).
I want to upgrade to wm6 and need to have a backup plan if it fails
10x in advance.
j3d1n4s7y said:
http://download.yousendit.com/FF900F2908E9D05B
Click to expand...
Click to collapse
thanx for uploading , but sorry this server blocked on our country
if any one can upload it again on the servers which i linked on the first post
thanx in advanced
looking for BUtton 1.05
this rom is not working for me. I stalls at about 98% of the process, and dies...
If you decide to do it, make sure you have a back up option.
Do a search on PirateBay for it. Its seeded...
i found the file
thanx for all
my device unlocked

New in flashing cooked roms - HELP

I will do it for the first time - Dutty's 1.8 ROM. I don't know the tools etc,...
Can someone help me how to do it and how to save original rom.
Thanks
Dave
Surfer_D said:
I will do it for the first time - Dutty's 1.8 ROM. I don't know the tools etc,...
Can someone help me how to do it and how to save original rom.
Thanks
Dave
Click to expand...
Click to collapse
Well first i dont really know how to save the original ROM but don't worry. The most of the original ROMs are available at the blackstoneWIKI so you can check if your version is listed before flashing.
When it comes to the flashing itself it's really easy. First of all download USPL from this site. Then you download the ROM you want to flash with. If the ROM is named nbhsigned.nbh you will want to change this to BLACIMG.nbh and if it's already named BLACIMG.nbh just leave it like that. Then you copy BLACIMG.nbh to the root of your storage card (the main folder). Then you go to activesync->connection settings->disable USB connections.
Now turn the phone off and remove your storage card. Enter bootloader mode by pressing PowerON and volDOWN simultaneously. When your in bootloader mode wait for the text "serial" at the bottom to change to USB. When it says USB you insert your storage card. After that you run blac_uspl in the USPL folder you downloaded. The phone will now restart and come back in USPL bootloader mode. USPL will update and recognize BLACIMG.nbh in your storage card and it will ask if you want to update. Press yes and your good to go.
You should backup all your important files before flashing and remember this way of flashing isn't 100% secure and I can't assure you that you're phone won't break, but following these steps closely really should narrow down the risks with flashing by alot.
Hope this helped you!
Thank you! This helped me too Can i do it with Windows 7?
Thanks friend, I tried it but I'm having a little difficulties When I use the tool I et an error message about USB - it can't find the phone.
Any ideas?
I did as you wrote and it worked till I used the EXE tool. There nothing happenes. I downloaded the latest version, but I0m using Vista. Acording to post where I downloaded it it should work on Vista.
Thanks for everything
Dave
First dump your rom using the method described here:
http://forum.xda-developers.com/showthread.php?t=427507
After that's done flash HardSPL described here:
http://forum.xda-developers.com/showthread.php?t=431217
A littlebit of reading wouldn't hurd you I think.
Also in Dutty's thread the procedure is well described how to flash so why open a new thread?
Surfer_D said:
Thanks friend, I tried it but I'm having a little difficulties When I use the tool I et an error message about USB - it can't find the phone.
Any ideas?
I did as you wrote and it worked till I used the EXE tool. There nothing happenes. I downloaded the latest version, but I0m using Vista. Acording to post where I downloaded it it should work on Vista.
Thanks for everything
Dave
Click to expand...
Click to collapse
Thanks Leo for the step by step
@OP, please read/search the sticky posts, wiki, ROM thread (and the rest of the forum if need be ) before starting a new thread.
Thread closed as per forum guidelines,
Dave

[Q] Messaging Error

Hi
I've try different build of Android the last week and I always get some error when I do some messaging. Half of the message I receive are in chinese instead of English or French.
I have try
Scoot_CyanogenMod_7_alpha_RLS1_All_Language
myn-WarmDonut-04-24-2010-240x320-110
Incubus26Jc's Super FroYo RLS16 All Languages
I have done some reading in the forum but didn't find the answer about this.
Please help.
Thanks
Le_MaiTre
change radio firmware.
What do you call radio firmware ??
got othe windows section and search radio...
What is the latest version I should have ??? Some threat are old and I can't figure out what is the latest version ...
Thanks
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
the files in http://it029000.massey.ac.nz/vogue/files/?C=M;O=D are outdated
Ok do you know where I can find the file that are the most up to date ???
Le_Maitre said:
Ok do you know where I can find the file that are the most up to date ???
Click to expand...
Click to collapse
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
theonew said:
You could try here: http://www.androidonhtc.com/wiki/Latest_Builds_(Vogue) or here: http://sourceforge.net/projects/androidhtc/files/. Hope this helps.
Click to expand...
Click to collapse
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Le_Maitre said:
The first link doesn't work and the second give me some file but I don't know what to do with this ... There's no explanation on the website ...
Click to expand...
Click to collapse
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
theonew said:
The link has been fixed and go here for instructions: http://techf1.blogspot.com/2010/04/coming-soon-installing-android-21-on.html. I would advise you to use the gingerbread image.
Click to expand...
Click to collapse
I have forgot to say that my installation is on NAND so I can't use haret.
-Arturo- said:
Here's how to change the radio
http://forum.xda-developers.com/showpost.php?p=5057656&postcount=6
here's the whole thread
http://forum.xda-developers.com/showthread.php?p=5057656#post5057656
And you need to find the latest radio for your phone possibly one that worked with windows mobile 6.51. Before you ask which one ..I have to say that I won't be able to help you as I don't own a vogue. I guess you could make a new thread and ask users which radios work best for them on vogue.
Click to expand...
Click to collapse
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.Can someone help me ??
Click to expand...
Click to collapse
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Le_Maitre said:
I've done a lot of research but didn't find the right answer for me. I have install the rom with the stepby step instruction in this page ...
http://forum.xda-developers.com/showthread.php?t=636024
I have also download the file from here that I have rename it and put it in the folder with the RUU Update Utility. I have try the file lastest-vogue.nbh
http://it029000.massey.ac.nz/vogue/files/?C=M;O=D
Everything work perfectly except the text message. I have also notice that in the setting when I go to about phone. The baseband version is unknown. I think that it's the problem but I don't know what to do to solve the problem.
Can someone help me ???
Thanks
Click to expand...
Click to collapse
theonew said:
Go here for the step by step instruction guide for NAND installation and links to some files: http://forum.xda-developers.com/showthread.php?t=636024. I hope this helps.
Click to expand...
Click to collapse
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Le_Maitre said:
Like I already said. I've follow the step by step on your post but someone tell me that my messaging error are from the outdated radio on the step by step instruction. He found link from an other forum that give me the latest radio but when I try to re-install it I get an error and I do not know what to do .... I'm lost .....
Click to expand...
Click to collapse
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you were using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
theonew said:
The only other thing I can think of is to have the latest radio from Windows Mobile. When you were using windows mobile, did you ever flash a custom rom? If you did then that may have fixed your problem if you wre using the latest radio version. If you weren't, then I guess if you want to fix your problem, you're gonna have to flash a windows mobile 6.5.x rom with the latest radio and then flash android.
Click to expand...
Click to collapse
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Le_Maitre said:
Yes I have flash my phone with WinMo before. I was using NFSFAN Rom before switching to Android 2 months ago ...
Click to expand...
Click to collapse
When you were using it, what was your radio version? If it was the latest, then it should have been 3.42.50. I read that for "Bell" users like you, the radio 3.42.50 is recommended for this installation.
Le_Maitre said:
I have forgot to say that my installation is on NAND so I can't use haret.
I have download the files for the radio 3.42.50 on the tread that you gave. I rename the .nbh in RUU_signed.nbh and put it on the Rom Update utility and start the update.
It gave me the right radio and I click on update. I load to 8 % and after gave me an error
Error 328 Invalid Command
I have to exit the update process and the phone reboot to the old Scoot CyanogenMod that is already install with the old radio. I think I miss something but can't find it.
Can someone help me ??
Click to expand...
Click to collapse
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
-Arturo- said:
did you read the whole post that i had provided before??? there isasolution to yourproblem there.
Way 3 (I know I said two ways...): There are a few
stock roms that come with new radios. One of
them can be downloaded directly from HTC and it
is for the Sprint Touch. This one comes with Radio
3.42.30
The other one is for Bell Mobility and this one
comes with Radio 3.42.50.
Why am I giving "Way 3" if the other two options
seem much easier?? I have run into the problem
where my device would not let me flash other
radios than the one that I had. SD card method
did not work and the RUU started out fine but
quits at 8% rebooting my phone and displaying
Error 328 in the RUU on the PC. Anyway, here are
the links...
Click to expand...
Click to collapse
I've read the whole post but I don't understand the 3rd way. If I click on the Bell rom with radio 3.42.50 it bring me to the HTC site and there nothing to download.
I've try to download the All Above Radios zipped. It gave me 3 files in a zip. I rename the file 3.42.50 in RUU_signed.nbh and put it in the folder of the ROMUtilityUpdate. Maybe is there I do something wrong ...
Did I miss something ???

Categories

Resources