Rolling Back - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Hey ppl let me first say"WHAT a DAMN DAMN great forum you have"
But i have a problem i have updated my Xda IIs (BlueAngel) to WM5 and working ok by all accounts.
But when i roll back to the latest update from 02 i have lost all the 02 stuff like 02 connect and auto config.
Can anyone help me to locate the first rom for my device with all the 02 stuff in it?
I have looked at the shipped roms and downloaded the ones i thought were for my device but i either get wrong country code or an install with out the 02 stuff?
So what am i doing wrong? can some one help me....?
PLEASE!!!!!!!

Download the extended rom files and install them if you're too lazy to reflash the EXT ROm.

omega_ said:
Download the extended rom files and install them if you're too lazy to reflash the EXT ROm.
Click to expand...
Click to collapse
see thats where i am stuck.
how do i reflash the extended ROM?
and from what u have said if i dont want to reflash extended rom i can just install the cab files?
Am i correct?

Related

Finally screwed my pda, help ?

Oh well that will teach me for playing, i have an xda mini s on 02 which was happily running the MB custom rom, i had to use shell tool to do this as it's a G4 device, i have done this twice now with no problems at all.
So i thought i would try a newer rom version
[os] 5.2.318
Build aku 15341 aku.4.0.0.01 WWE
Which is posted half way down on this page http://ppcwarez.org/phpBB2/viewtopic.php?t=18670&postdays=0&postorder=asc&start=15
I used the same process as before, but instead of taking 10 -11 mins to update only the os, it finshed in 1 min because i got the activesync disconnect noise.
So i dont know what to do now ? if i turn it on it just sits at the blue 02 screen with all the ipl and spl and radio versions, obviously there is no os on there now.
How do i fix this please ?
Any ideas ?
Thanks.....
Please provide your current IPL and SPL to help us here, but based on what you are saying you need to put your phone into the bootloader screen (hold down the camera button while you turn it on, and get to teh "rainbow" screen). Then you can flash your carrier's official ROM onto your phone. Once you've done that, you should be good to go to play again.
Note, Activesync will NOT connect while you are in the bootloader screen, but you can still flash the official rom this way (do NOT try to flash a custom ROM, only an official one).
Ok many thanks for the quick reply, i did get the official rom but did not know about getting into bootloader and flashing it that way.
I have put it back to default 02 rom now, and i will make sure i do not flash a custom rom this way, good tip.
I am off now to flash again this custom rom and try again.
Thankyou very much for your help
corky said:
Ok many thanks for the quick reply, i did get the official rom but did not know about getting into bootloader and flashing it that way.
I have put it back to default 02 rom now, and i will make sure i do not flash a custom rom this way, good tip.
I am off now to flash again this custom rom and try again.
Thankyou very much for your help
Click to expand...
Click to collapse
Would you also please delete the WAREZ link?
Thanks.
--M

flashing back to wm5?

i got some quetion.
if now i got wm6 on my device and i want to flash back to wm5
there is something special that i need to do?
how i just need to flash?
and by the way.. someone can give me a 2005 rom?
aVoKaDo-MaN said:
i got some quetion.
if now i got wm6 on my device and i want to flash back to wm5
there is something special that i need to do?
how i just need to flash?
and by the way.. someone can give me a 2005 rom?
Click to expand...
Click to collapse
Of course you can, just download a WM5 based rom from your mobile provider and run the flash process by double clicking on the file you have downloaded you do not need any special procedures...
got it tnx dude
got maybe a wm5 rom?
look to the web sites of the provider from where your device comes from. search in the support sites for ROM-, Firmware- or Software updates. check the update informations: the exakt file should be a ROM- or firmeware update

update w/out hardspl please help

i got my tilt from a friend. she did a rom update from htc.DEVICE INFO READS AS FOLLOWS: ROM version:1.62.502.0 ROM date:01/17/08 Radio version:1.27.14.09 Protocal version:22.45.88.07H ABOUT READS AS FOLLOWS:Windows Mobile 6 Professional CE OS 5.2.1662(Build 18128.0.4.4) she did not install HardSPL. i would like to flash a new rom. did she sell me a phone that cannot flash or can i install HardSPL and flash my heart out? also do i need to unlock my phone b4 flashing or can i just start w/the hardspl thread? thanks u guys. if this has been answered allready please link me 2 the post i've been searching 2 days now.
[email protected] said:
i got my tilt from a friend. she did a rom update from htc.DEVICE INFO READS AS FOLLOWS: ROM version:1.62.502.0 ROM date:01/17/08 Radio version:1.27.14.09 Protocal version:22.45.88.07H ABOUT READS AS FOLLOWS:Windows Mobile 6 Professional CE OS 5.2.1662(Build 18128.0.4.4) she did not install HardSPL. i would like to flash a new rom. did she sell me a phone that cannot flash or can i install HardSPL and flash my heart out? also do i need to unlock my phone b4 flashing or can i just start w/the hardspl thread? thanks u guys. if this has been answered allready please link me 2 the post i've been searching 2 days now.
Click to expand...
Click to collapse
That is the up to date official rom, there are no newer ones. If you want to install a custom rom, you need to install HardSPL first. But before doing anything read and understand the wiki on Rom Flashing before doing anything . Have Fun
read the kaiser wiki ... do your homework and we will gladly help. Just don't ask stuff that gets asked 10 times a day.
Before flashing any rom you need to have hardspl, no ifs ands or buts; unless you want to ruin your device in that case feel free.

Help with Rolling back to Original ROM..

Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
I did lots of search to bring back the STOCK ROM and I spent two full days..but I was not succeeded..let me see the link..thx bro
Ok, I am downloading the Rogers ROM but now can I put this rom since I have HardSPL 1.40 Olinex..will there be a problem?..Another thing..I was trying to put stock rom from HTC but it did not work it was giving me an Error "ERROR 244 INVALID MODEL ID"..do you have any IDEA why is that?..I do have CID UNLOCK..So when it goes to Rainbow color screen it says "Security Unlock" on the top...
Ok man, calm down and do a search..
I had the Rogers ROM posted MONTHS ago.
http://forum.xda-developers.com/showthread.php?t=455347
hertstealer said:
Ok, GUYS i am so frustrated here...i only wanted to unlock my diamond so i taught i might have to put new rom too so now i end up putting new rom..this is a brand new device..i do not need any tweaks and stuff..anyway..now i do have unlock diamond and CID Unlock but i also have FULL OF BUGS ROM...
This is what i have...
HardSPL 1.40 Olinex
Radio 1.5
ROM:-> Macadam! V1.1
Seriously this people should not be allow to put their ROMS in the forums unless they verify and sure that there are no BUGS..
Now, I want to go back to Rogers Radio and ROM and SPL..how can i go about doing that..i do not have copy of current ROM...if anyone have a copy of ROGERS ROM..plz post it and give me a instruction of putting it back...I did follow wiki to revert back but it did not work..I try to put new Stock Rom from HTC..it did not work either...can some one please help..ALL HELP will be appreciated thx..
Click to expand...
Click to collapse
The one that you give me the link..that Rom is not Rogers Shipped ROM..and i think i might brink my Diamond...
Ok Guys..I seem to get no Luck..I posted this few weeks ago and I am still stuck with Bug Rom..Now, 1st thing I can not find Rogers Stock Rom..2nd I found a HTC Stock Rom but it will not install on my phone..it gives Error 244 "Invalid Model ID", so I do not know what to do..I was searching online to find the solution and someone said it because it is trying to overwrite the HardSPL, So I am thinking to change my 1.40 Olinex to 1.23 something but from XDA Forum it says install OS before overwriting HardSPL..any ideas..HELP PLZ..And PPL who make this Coocked ROM PLZ STOP..You ruining ppl phoneS..all I wanted to do is Unlock my phone,so i taught i might have to change ROM too so here I am stuck with messy ROM...Once Again My phone is Unlcok,its CID UNLOCK and Security Unlock..PLZ HELP
There is no STOCK rogers rom for the Diamond. Flash the one noted above, it is a COPY of the stock rom, extracted from a stock Rogers Diamond. It does not contain the SPL for Boot splash, other than that it IS a stock ROM.

Flashing without hardspl :S

Hi,
Just downloaded the new R3 UK firmware for my X1
I tried to Hard Spl my phone but it failed at 0%
But..
I thought id try flashing the firmware WITHOUT a hardspl using the microsd method.. and it worked :S is this normal?
everything seems to be working fine...
will anything happen to my phone in the future?
If it helps i was using 02 R2 firmware previously
Thanks
Adam
If I read your post correctly. You went and flashed an official SE Rom which you wouldn't need HardSPL for because they are released by SE and aren't custom roms.
You could of got the same by using the auto update service. You will only need HardSPL, is you try and flash any of the custom roms in this forum.
Well ive debranded by phone then...
and according to the turtorial flashing roms
http://forum.xda-developers.com/showthread.php?t=446070
you have to use HardSpl
I just wondered that if i didnt have a hardspl would this cause any problems with my phone.
That update would not have been available through SEUS because i have an o2 branded x1.
So am guessing there isnt going to be any problems with my phone? and if it ever breaks will it need to be flashed back to 02 R2?
Thanks
adamleerusse said:
Well ive debranded by phone then...
and according to the turtorial flashing roms
http://forum.xda-developers.com/showthread.php?t=446070
you have to use HardSpl
I just wondered that if i didnt have a hardspl would this cause any problems with my phone.
That update would not have been available through SEUS because i have an o2 branded x1.
So am guessing there isnt going to be any problems with my phone? and if it ever breaks will it need to be flashed back to 02 R2?
Thanks
Click to expand...
Click to collapse
Can somebody please send a message to the mods or topic creator or something to change the title to "how to flash CUSTOM ROMs?" This would make it much easier to understand, and less of a hassle for newcomers to flash OFFICIAL Roms.

Categories

Resources