Related
bit of a problem here... my pc crashed and i'm forced to use a new one... after connecting my BA using the cradle, my pc recognized the new hardware but was not able to install the driver for RNDIS BA... tried using the companion cd but the driver is not included there... already googled for it on windows.com and any other site i can think of but still cant locate it. d/led from ms.com the RNDIS USB kit 2005 but have no idea how to use it, the driver is not also in there. btw, the pc i'm using is not yet on SP2 so AS 3.2 is installed here.
so i used a laptop, upgraded to [email protected] and was able to install AS 4.2. connected my BA there and still cannot install the RNDIS for BA on laptop also... how come? do i have to downgrade first to 2003 so that it can be installed then upgrade back to wm5? hope someone can help me, or at least point me in the correct direction. thanks
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
GiNkAnO said:
The RNDIS driver actually is in the BA itself. Connect ur device with PC. Wait 4 a pop-up from bottom right " Your new hardware installed and ready to use". Then it will connect to ur active sync... You Hav to wait for few sec(depends on your pc performance) for it to install the driver.
If it won't work try uninstall the old driver then reconect
Click to expand...
Click to collapse
actually the pop up window will say there is a problem with your hardware and it is not installed and your new hardware will not work properly... not sure why, i didn't change anything in my BA...
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
still can't fix the problem... FOund new hardware wizard says hardware not installed because wizard cant find the necessary software. will try it out later when the laptop comes home... whay puzzles me is that this never happened before.
hi
istall this driver
hi i miss the attachments..try dis one
meehaa said:
hi i miss the attachments..try dis one
Click to expand...
Click to collapse
thanks meehaa, i downloaded that file but when i try to redirect the wizard to where the .sys file is, it won't recognize the file...
also tried to direct the wizard on all folders inside c:\windows hoping to get lucky but still no dice...
is it the device itself that has the problem? i can easily downgrade to 2003se and upgrade but since i'm not sure it will work, i'll just screw myself
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
meehaa said:
I had the same problem
after rcoganizing it doesnt istall the driver
so install RNDIS
and after that you need to install this one too
try it
Click to expand...
Click to collapse
sorry for the late reply... but after posting my last msg i got pissed off and reformatted the pc.. thank goodness there's such a thing as norton ghost after SP2 upgrade the pc was finally able to recognize the BA. but thanks for your help meehaa, i'll try your fix on the laptop since i have the same problem there. hopefully that will fix it without needing a reformat
Windows XP Generic RNDIS Driver
MCSchermer said:
I guess you installed ActiveSync 4.x.
Try this: open the devicemanager and selected the device not installed. right click and select update driver, now guide windows to look in C:\Program Files\Microsoft ActiveSync\drivers and it should detect the driver.
Click to expand...
Click to collapse
Thanks for the tip... It works great!
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment ActivSync4.5setup.rar
izulthea said:
Hello i have same problem, and now fixed. You just need to Update Your ActiveSync to 4.5
View attachment 476500
Click to expand...
Click to collapse
Are these drivers you are looking for...
The final version of WMDC was posted today. See the link below as the Windows Mobile Device Center Page hasn't been updated yet.
http://www.theunwired.net/?itemid=3591
Or download directly
Download x86 Version Here
http://www.microsoft.com/downloads/...ea-9df9-4920-af33-3a0e2e4e7beb&DisplayLang=en
Download x64 Version Here
http://www.microsoft.com/downloads/...aa-bc6b-4864-8ffe-dc26e1d9f843&DisplayLang=en
Please reply if you have any success syncing the blue angel.
Can someone please upload it or provide alternative link. I cant seem to download it directly from microsoft. Thanks
firebird said:
Please reply if you have any success syncing the blue angel.
Click to expand...
Click to collapse
Hi, did download (the latest on MS website), install and use it without any trouble. It found my exchange setting on my BA and applied them without even asking me! This was last night, will see what happens today!
@ daddy_yankee1980: It is an upgrade to Vista with all the verification required, so even if it is uploaded you will have to be online and connected to MS website (I think).
it is "Microsoft Windows Mobile Device Center Driver for Windows Vista"
not the app
All the beta branding is gone from the application too - so I think its both driver and app.
Maybe you are right, i wont use vista just yet they have to fix a lot of bugs until i start to use it daily
here is links for both builds
x86
amd64
I'm currently using the Helmi AKU3.5 1.4Beta with no sucess to be detected, what rom are you using ?
Are you running the final version of the WMDC ?
Still problems with Vista
I installed the Windows Vista Mobile Device Driver Update Final, but my MDA Vario I is not connected. It is not recognized anyway. Any ideas how to solve this issue?
Thanks.
Markus
RUU
I am using Vista with final WMDC released driver with O2 Atom.
I am able to properly sync. No problems. However I am not able to update the ROM. It goes upto the sensing screen to display the current ROM on device and to be updated ROM info. etc. In the next screen it hangs and after some time of about 1 minute the device update utility says that it is not able to update the device. I even disable the firewall to check if it is issue with firewall. But nope no help. I again checked it with windows xp and active sync v. 4.2 where everything works perfect so no issues with O2 atom.
Any help is appreciated.
SX66 WM5 synched successfully
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
I'm still not able to sync in Vista with WMDC. My BA is saying:
Connection Not Valid: unable to open the connection '`USB'. This Connection is no longer valid or does not exist. Select a different connection and try again.
Click to expand...
Click to collapse
I'm going to try a hard reset on my BA and see if thats the problem.
brandonm said:
I installed Windows Mobile Device Center on Vista Ultimate and successfully synchronized my SX66 running WM5. In addition, I sychnronized my Mail with Outlook 2007. However, it appears that there is no backup utility. When I checked the help for WMDC, it only shows how to backup a "Windows Mobile 2003 powered device". Is there some other way I can backup my system? Maybe another tool. I am going to try to use ActiveSync 4.1 tomorrow, which is installed on my work computer.
Click to expand...
Click to collapse
Since I just installed WM5 on my SX66, I was unaware that AciveSync does not backup WM5 devices. I purchased Spb Backup and that works better anyways.
It Works
When I plugged my device in today, the system was able to find drivers. All is good now.
Is there a way to allow WM6 to connect to Active Sync 4.2. The Reason being, I cannot install Active Sync 4.5 because I do not have a genuine version of windows. This is also creating a problem with Flashing ROM.
I am using WM6 Most Beautiful Edition. Now I'm stuck because the ROM Update Utility will not recognize my Wizard.
Please help.........
ntornics said:
Is there a way to allow WM6 to connect to Active Sync 4.2. The Reason being, I cannot install Active Sync 4.5 because I do not have a genuine version of windows. This is also creating a problem with Flashing ROM.
I am using WM6 Most Beautiful Edition. Now I'm stuck because the ROM Update Utility will not recognize my Wizard.
Please help.........
Click to expand...
Click to collapse
Tried just using the bootloader?
--M
ntornics said:
Is there a way to allow WM6 to connect to Active Sync 4.2. The Reason being, I cannot install Active Sync 4.5 because I do not have a genuine version of windows. This is also creating a problem with Flashing ROM.
I am using WM6 Most Beautiful Edition. Now I'm stuck because the ROM Update Utility will not recognize my Wizard.
Please help.........
Click to expand...
Click to collapse
Find another computer perhaps. There are quite a few windows computers with usb ports out there in the world, have you no friends?
since when do you need a validated xp to install activesync 4.5 ?
just download it from microsofts page:
http://www.microsoft.com/downloads/...FamilyID=9E641C34-6F7F-404D-A04B-DC09F8141141
works fine even if you have not yet installed/validated WGA.
Just got on a plane and found out that the WM 6.1 update seems to have killed my HTC remote control for controlling Audio Manager or Windows Media.
It's one of these: http://www.negrielectronics.com/product_info.php?currency=USD&products_id=1067.
Anyone else run into this? Theres posts on installing the audio driver for other phones, but I don't find one for the Kaiser floating around out there.
There is an updated remote control driver for WM6.1. It can be donwloaded from HTC e-club.
Ah. For anyone that's also looking, it's not on the HTC US site. You have to hit the HTC Europe page and then it will show up.
Interesting. I grabbed the driver and ran the install and the app tells me I have the latest version installed. Won't overwrite or let me reinstall.
Anyone else having this issue? The control still isn't working and I can't tell what the cab files are looking to overwrite to force the install through.
Same issue after new HTC rom update
Any solution ?
Michael
mdorchain said:
Same issue after new HTC rom update
Any solution ?
Click to expand...
Click to collapse
Instal the WM 6.1 compatible driver from HTCs website off the bat or if the old version is installed first, hard reset and then install just the latest driver. Why anyone would want the current HTC official WM 6.1 'upgrade' (at least a WWE version) is an important question.
hi Flying Kiwi, I guess the main reason of the upgrade is bug fixing which I guess now is solving some adding others
I'm a new HTC user more used to symbian devices before.
The nokia updates are always good, so I thought it was the same for HTC.
I guess I was wrong.
I followed many times the installation procedure, but I always get the same result :
- Drivers already existing on the PC
- GetDeviceInfo.exe error on the Touch pro.
I guess the GetDeviceInfo error is the source of the pb. Maybe a pb with the ROM itself.
Thanks
Michael
mdorchain said:
I followed many times the installation procedure, but I always get the same result :
- Drivers already existing on the PC
- GetDeviceInfo.exe error on the Touch pro.
I guess the GetDeviceInfo error is the source of the pb.
Click to expand...
Click to collapse
Sorry I don't have one of these remote devices to test with - I just assumed (and we know what that results in) that from gauntman's post there was a WM 6.1 compatible driver but all I've been able to find is a very elderly cab (after renaming the file to have a zip extension) - gauntman please point us to a new version that does work if you know of it.
IF you have a stock ROM/Radio/SPL and the remote isn't working and installing the driver doesn't fix it or results in an error installation then my suggestion is to try the headphones that come with the remote and ensure they're fully plugged in. If that still doesn't work then it's time to contact HTC!
I tried this updated version found Here,
But the problem described is the one described.
Is there anyway to uninstall a driver without rebuilding the ROM ?
Sorry for the newbie question, but just an idea.
Maybe I should go for a stable cooked ROM and install the drivers on it.
But if not working i will cry lol
Michael
mdorchain said:
I tried this updated version found Here,
But the problem described is the one described.
Click to expand...
Click to collapse
That's the one I was referring to, maybe gauntman knows of something newer.... In the meantime have you tried what I suggested ie restoring it to a stock HTC state and testing again with the headphones that came with the remote fully plugged in? If that doesn't work then it's fair and square a HTC issue to resolve.
Thanks I really appreciate your feedback.
Yes I actually did a hard reset.
The stock headphone is working fine.
So far the RC E100 has no sound problem, just the button issues.
I guess not a mini usb issue, but really a driver pb.
I contacted HTC about the last ROM and their accessory, let's see if the reputation of their technical support is as good as their product
Thanks
Michael
I`ve installed WM 6.5 in my Qtek 9090, and when i put in dock to syncronize with my pc, said that the USB port is no longer availabile, chose another way to syncronize, or install a synchronazation software from the getting started disc... but i dont have this disk. what can i do to sync my phone with pc?
first of all, perform a hard reset by pressing power+reset+camera+record, in the menu that appears, set
Enable Kitl NO
Format Storage YES
Clear Registry Hive YES
using the camera and record buttons, confirm with the mail button.
make sure you delete older sync partnerships on your pc, you need to set up a new one.
if bot those actions did not work, try another usb port or finally flashing the rom again or maybe another rom, there are certain builds out there, that have sync issues, which one did you pick exactly?
Same problem
I have just updated a SPV M2000 to WM6.5 and cannot sync
I have tried a virgin PC running XP and this doesn't communicate. The USB connection is recognised by the PC but neither active sync works nor does the file manager recognise the PDA.
The PDA says that the USB port is a problem.
Can I still reupgrade? Maybe should I try an earlier version?
Is there a "known good" version of WM6.5 for SPV M2000?
Thanks for your help
hi and welcome to the forum.
what rom are you using (build number, chef)?
are you sure you followed the right upgrade procedure to the point? http://forum.xda-developers.com/showpost.php?p=4706441&postcount=2
especially the hard reset at the end is important and might help your case here.
yes, you will be able to upgrade/downgrade to change the rom, as long as activesync 4.5 is installed on a windows xp pc. that brings the needed driver for the device to connect, also if you can't sync.
there are many good wm6.5 roms here, just go to the blueangel rom development section and look at the different releases.
Same Problem sorted
Problem sorted.
Before you replied I tried one of the ROMs you recommended and Eureka.
This forum is really useful - thanks
I wonder if you can point me in the right direction. My real reason for upgrading the Blue Angel was to see if it would run Tom Tom Navigator 7 which needs WM6. It won't. I simply get the answer Program not for this device even though I am now running quite successfully WM6.5.