i miss my xda2s for aweek -extended rom gone - MDA III, XDA III, PDA2k, 9090 Software Upgrading

stuck in the boot screen wm5
after upgrading to the last one mamaich test rom , i am not sure what is going on because all the past rom upgrade succeded
the error is when i used back the old one 2003se shipped this message came out (error upgrading extended rom)2nd stage process out can any body solve my prob?
any way thanks to our maimach for his hard working :evil:

Related

Help installing Original ROM after Upgrading to Custom

Hi
I tried upgrading to the rom below
Custom_RUU_Wizard_1050402_101_11210_O2_ENG_CID.exe
but it made my imate totally sluggish and really slow, especially when opening mesages etc. I decided I wanted to revert back to the original imate ROM but when I was installing it it failed before even getting to 1%
It stayed at the point where my k-jam was red blue green etc
Anyone suggest why this might be the case?
Also can someone explain what the CID unlocker is used for? Does it allow you to 'downgrade' ROMs?
Thanks for your help guys. I'm still quite new to this
Scaseman
CID unlockeris is needed to be able load roms that are not made for your phone... like MDA Vario without CID unlocker cant take rom that was made for Qtec and other way...
try RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe
its the best rom for me... make sure you run CID unlocker first and after WM5 loaded hit reset on your phone so it wont load cabs from extended rom (if you dont want them)
how to reinstall ROM of XDA ll mini
i tried to upgrade my XDA ll mini ROM with 'XDA ll upgrade file' given at 'o2-online.de' instead of giving me error report at the beginning of upgrade it started erasing my ROM and then gave me an error.now my rom is erased and it cant be turned on.however when i connect it to the pc through USB cable ,on the srceen "USB v1.02" is being displayed.how to reinstall the software and where can i get the download file.please help i used my phone 1 month back.

HimaClearJumpCode problems

How do I restore my PDA to a working state after running HimaClearJumpCode.exe on the device.
All I get on the PDA screen now is "USB/Serial" and "V1.01"
I was trying to uppgrade to WM5 before I found out ther is no WM5 for the
Qtek 2020i :-(
UPDATE: Never mind figured it out
himaclearjumpcode
I DID IT!
Now the only thing i got is seria/usb and v1.03
how can i get out of it and have my xdaII back?
please help me
Does hitting the soft reset work? Or did you actually begin the upgrade process? Seems that you're stuck in bootloader mode.

cant upgrade!

IVe upgraded Farias rom and did the cid and sim unlock...
Now Ive came up with a problem. I cant upgrade any rom. When i try to upgrade my qtek k-jam i-mate gets completely restarted and rom upgrade stops.. each time trying to upgrade i need to take off the battery and replug it... First time i tried i was afraid it became a dead phone but now i got used to it .Anyone know anyway I can upgrade a rom again? That would be really helpful! Thanks!
Follow directions exactly.
http://forum.xda-developers.com/showthread.php?t=263116

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn

Upgrade stop at 99%

hi everybody,
When I'm trying to upgrade my wizard, the process always stop at 99%.
I have try with several rom and it's always the same kind of problem. These just one Rom that is working the Wizard_Love_2.26.10.2.
Do someone have any clue of how to upgrade my phone with a wm6 rom?
Thank's a lot
How long have you waited? I've seen it sometimes take 10 minutes or something until it finished..
The windows sofware send me an error and then the update stop..
Your phone is locked. I had the same error, also need to lower your Rom.
I already have flashed my rom to a lowest one for instance "WM5SE rev 4.0 - WM5 without stylus but style" (this one work without any kind of problem). Then I have tryed to update with a WM6 one and it stop at 99% or I have the message "Invalid upgrade toll".
Do someone have had the same kind of pbl and solved it?
thank's a million
i had the same problem a few days ago and all i did was downgrade it to buttons rom and then upgrade it to the tomobile2.26 and everything installed correctly.

Categories

Resources