How to Uninstall EXT-ROMS? - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I am downgrading my BA and noticed that after downgrounding, when I do a hardreset it re-installs the EXT ROMS that i wanted to get rid of.
How can I disable this?
It installs the standardroms from the BA SX66 Standardization project.
Thanks

Did you remember to remove them from your SD Card?

Related

Exteneded ROM is Corrupt after downgrade to 2003SE

Strange messages appear after downgrading form WM2005 to WM2003SE. I can unlock & unhide Ext ROM.However, Ext. ROM is empty and I can't copy files to ext ROM. Attached are images of maessages that I get on Hard Reset. I don't even know to select YES or NO. Any help?
same problem
I did a second hard-reset. After that no problem....
Thank you deesh00 for your reply. I'll give it a try.

Vario to Imate: apps no longer ask where to install?

Just flashed my Vario to Imate ROM. All went great and it seems to respond quiker. I also deleted some stuff from Extended ROM which is not needed.
The one thing I miss though is that when I installed an application on the Vario it used to ask where I wanted it installed: Memory or storage card. It no longer does this. Is this related to the Imate ROM or did I delete something from Extended ROM which causes this?
can you browse to storage card.
mine is sometimes not seen , reinserting it fixis it then

Upgrading to TuMa 1.3: Must have an SD Card?

I successfully upgraded from WM2003 to WM2005 some months ago. I'd now like to upgrade again to TuMa 1.3. Currently my existing rom is 5.03.02 and it crashes quite regularly - especially if people call me.
Anyway, I've been reading through the wiki and a lot of the threads again but there's one thing I can't seem to understand. It seems as if upgrading requires an SD card? Is this the case?
Now, before I'm accused of not reading the documentation, I have and it quite clearly states, "copy the EXTROM folder to your storage card". That's fine and well but I've never had an SD card so how did I manage the first upgrade?
What I've been trying to find out (with little success) is if "storage card" is like the ROM storage area but before I flash my SPV M2000 into a very expensive paperweight I thought I'd better check. Better safe than sorry I guess.
Can someone confirm?
no sd card
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Re: no sd card
jonni1980 said:
i've got a spv m2000 and no sd card but i've managed to upgrade to tuma 1.3 no problem i just copied the extrom to the storage on the phone got less storage now but still works fine
Click to expand...
Click to collapse
Do you remember where you copied it to? Was it the root directory or just in My Documents?
My worry is I'll copy it somewhere that the install program won't be looking. In the documentation it explicitly states "storage card/EXTROM". It'd be just my luck to copy to the files to the root of my device - try to flash it and having it fail because it couldn't find the image files.
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
TheLastOne said:
You seriously don't have an SD Card?!
Go to a store, buy a 128 MB one for nearly nothing. Honestly, I can't imagine running a Windows Mobile device without one, especially Windows Mobile 5. There just isn't enough space natively in the device.
You don't technically NEED anything in the EXTROM folder either. Alternatively, you can just take all of its contents (cab files) and put them on your device using activesync, and run them in File Explorer to install them. It's the same thing, just not automatic.
Click to expand...
Click to collapse
I've not had the need to use much memory on the phone really.
When I had an iPAQ I needed loads of memory and was always using it everywhere but I've found the SPV to be very slow (hopefully improved with the new ROM) and also the headphone socket is proprietary so I can't use headphones that fit my ears that don't fall out.
As well as this, I no longer use Windows - well I use my gf's laptop to flash the phone but that's about it. There's very little integration with Unix and the SPV and it's led to a dramatic reduction of usage.
I've heard of some programs that can sync with Evolution on Unix but they're very unstable at the moment and require quite some understanding to get working and I don't have the time to get that working just yet - maybe in a few weeks time.
I've already ordered an SD card but was just a little excited about the prospect of flashing the ROM (it's like Christmas morning for me!) and was wondering if I could do it without it.
Anyway, running the cabs one by one sounds like a solution for the time being. I thought it needed to replace parts of the sub-system that needed a hard reset no?
Once the ROM is flashed, will Device Information reflect the ROM Version as WM5 5.1.1700?
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
xplode said:
There is no problem to flash this rom without SD card, because you can install manually every cab from extrom after flashing
Click to expand...
Click to collapse
Thanks xplode.
I've worked out that the cabs are completely independent of the ROM update and as such don't even need to be on the device.
I thought they were like install files and needed to be present after reboot for the flashing to complete properly. My mistake.

Installing onto mini SD card?

Hi,
When I install something onto my Vario from my PC it automatically installs in the default location.
On my other PDA I get the choice, how come I don't with my Vario, and how can I install something to my mini SD?
Thanks all,
Thought I had sorted it, but no.
Any ideas, I want to install TomTom but don't have enough room.
Azz said:
Thought I had sorted it, but no.
Any ideas, I want to install TomTom but don't have enough room.
Click to expand...
Click to collapse
Does the Vario use WM 2003? If so that is why everything from a PC install goes to main memory. Do a search, there is a cab installer program somewhere that you can put on your Vario that will allow you to select where you want to install.
schmenge said:
Does the Vario use WM 2003? If so that is why everything from a PC install goes to main memory. Do a search, there is a cab installer program somewhere that you can put on your Vario that will allow you to select where you want to install.
Click to expand...
Click to collapse
Naa it uses WM5, my Axim uses WM2003SE and that asks.
Will do a search for the cab thanks.
Well the thing is, tomtom HAS to be installed to the device i guess. I always install tomtom naviagator 6.02 (with the todayscreen plugin). It comes up with where I wish to install it, sd card or the device. Of course i select the sd card, but nevertheless it installs in the device. I've tested it with several roms, and also with the WM6 rom. Problem is still there, so i guess it's not a bug but a feature, haha.
TheWizzard2203 said:
Well the thing is, tomtom HAS to be installed to the device i guess. I always install tomtom naviagator 6.02 (with the todayscreen plugin). It comes up with where I wish to install it, sd card or the device. Of course i select the sd card, but nevertheless it installs in the device. I've tested it with several roms, and also with the WM6 rom. Problem is still there, so i guess it's not a bug but a feature, haha.
Click to expand...
Click to collapse
you can move the executables to the SD card and it will work... just move the navigator directory from program files to sd program files, make a link to it, and everything works... as for TT5 and TT6, have both installed on SD card. And also you can remove those TTODAY files from root dir if not using the TT today screen, and also all the files for contact navigation if you dont use that. At the end only the executable dir has to be somewhere.
P.

WM 6 ext roms?

Hi guys. Here's the deal. Can you flash a WM5 ext rom in a WM6 device. I have a wizard and i'm just wondering. is it possible? or do I need a wm6 ext rom? OH and ive searched my head off and i cant find anywhere with the aforementioned ext roms..........any help? Thanks in advance.
You can (However you may need to use itsutils yourself), however note that software and settings in WM5 ext rom may not be fully compatible with WM6.
btw, you can just use Total Commander and navigate to \Extended_ROM and make a backup to files there to your SD card, then install what you need after flashing WM6, that's the same unless not automatic.
starkwong said:
You can (However you may need to use itsutils yourself), however note that software and settings in WM5 ext rom may not be fully compatible with WM6.
btw, you can just use Total Commander and navigate to \Extended_ROM and make a backup to files there to your SD card, then install what you need after flashing WM6, that's the same unless not automatic.
Click to expand...
Click to collapse
sorry to butt in but WST allows to copy all files (or just some) to the Hard Drive in an easy manner
btw, WST can also be used to flash an extended rom in .nb format (decrypted as a partition image)

Categories

Resources