I had a problem with my upgrade... now i whant to do a downgrade.....or even try to reinstall but i can´t......
When i prepare to downgrade...... i press power+record+reset and apears SERIAL V2.06 .I put the qtek in the cradle but the "usb" is not there in the screen....... i try to downgrade or even reinstall wm5 but he cant comunicate.... the problem isn´t in the cradle because i boot to wm5 and he comunicates...
i think that some file in the rom is missing... in bootloader he dont comunicate by usb...
"6. Put your device into bootloader mode.
Press Power + record (above the volume slider) + softreset at the same time.
You should see a white screen with "Serial" text on it and the Bootloader version.
Put your device into the cradle
Make sure that the charger of your PDA is connected to the cradle.
The text should change to "USB" now. "------------------->>> this is not shown.....only Serial Apears....
Help please............... does any one knows how I could solve this?
is there any other way to install a rom? if i try to upgrade him on wm5 desktop I get this message: "Error 100:Model ID error" , if i try to downgrade in wm5 desktop i get this message
have you opened task manager and closed the following processes?
rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
if you still have problems read this http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
mrcopyright said:
have you opened task manager and closed the following processes?
rapimgr.exe, outlook.exe, winword.exe, wcescomm.exe, wcesmgr.exe
if you still have problems read this http://wiki.xda-developers.com/index.php?pagename=BA_5.1.1700_build_14343_Upgrade
Click to expand...
Click to collapse
Yes, i´ve closed all the processes....... i don´t see a solution........
I tried using the Siemens upgrade for my SX66, which made it display Serial on the top and v2.07 on the bottom
I followed the steps reccomended for when such a thing takes place (ie doing a flash reset on the phone) but now the screen remains black and doesn't even display Serial and v2.07
When plugged into my computer, absolutely nothing happens and the computer does not recognize it.
I eventually got the screen to display USB, ran the update again but after about 15 minutes I got an error screen on the PC that read:
Error 201: Get Device Data Error
Can not get device data. Please make sure device are connected to PC and execute this update utility again
Please help!
A few months ago the charger port on my wizard snapped off, so i got out my soldering iron soldered it back on, everything worked fine. apart from the fact that it didn't sync. i live with this as i use linux and rarely need to sync i just bluetooth stuff across.
But today i bricked my phone, and can't start it (hangs on startup). so i try and flash it but i cant as it doesnt sync.
so i'm wondering if anyone has a reTouched backup rom that i can flash from SD card with? as i rely on my phone greatly.
and t-mobile are saying i can't upgrade untill january (even though my dad was able to upgrade and i got mine around the same time both on 18 month contracts)
so please anyone?
Thanks in advance.
Darius
Did you try to hard-reset your phone?
Pressing CommManager + VoiceCommand button with the reset hole, then press Talk button when prompted.
http://forum.xda-developers.com/showthread.php?t=334440
I just had that problem, and it was discussed in detail in the thread I linked above. Happy reading and good luck!
You don't have any other option except to get your mini usb port repaired of your phone,in order to unbrick or flash any other rom to your phone.
the option you are talking about is not possible, as Sdcard image created by any other phone can not be flashed to another phone,as at the time of creating backup image on Sdcard,the method uses some values from the same device that are stored at the first 0x200 bytes ,therefore, Sdcard image of one phone can not be flashed to another phone,it can only flash back the image created by the same phone.
try to revive your phone by Hard reset,it might get ok,although by doing Hard reset you'll loose all your personal data,but it might revive the phone,otherwise in any case try to get mini usb repaired.
On second thought,are using any Sdcard already in your phone ?if yes take out the Sdcard and Hard reset,it might do the trick,sometimes if Sdcard needs formate,it freezes the splash screen,good luck
I've tried a hard reset, doesnt seem to work. allthough it did once but then same thing happened next time i soft reset.
i'm using the .Mun. wm6 rom
i just took it back apart gave it a clean (cleared the tons of sand blocking it up)
resoldered the usb port
now i get "Device not recognized" where as before i got nothing.
I'm thinking i need a new phone
dariushuntly said:
I've tried a hard reset, doesnt seem to work. allthough it did once but then same thing happened next time i soft reset.
i'm using the .Mun. wm6 rom
i just took it back apart gave it a clean (cleared the tons of sand blocking it up)
resoldered the usb port
now i get "Device not recognized" where as before i got nothing.
I'm thinking i need a new phone
Click to expand...
Click to collapse
hmmmm, I think it's woken up ,I hope,do one more thing, uninstall Active sync, reboot your pc,download latest Active sync ver 4.5 and update your pc to Windows Installer 3.1 from Windows update,Install the new active sync 4.5 and try to synchronize,lets hope it'll do the trick,no harm giving it a try this way
On second thought,to check if the mini usb port of your phone has started to work is to get your phone off the usb cable,try to go into bootloader mode on phone and when in bootloader mode connect usb cable to phone and your pc,if after connecting you see a small usb appear at the bottom of the bootloader screen of your phone,than VOILLA! your all set to flash. good luck
I tried the bootloader again and i did get the USB in the corner, but, it still refuses to sync or flash (i also reinstalled activesync and everything necessary).
seems a bit strange. anyway, whenever i plug it in a get the bubble saying "device not recognized" etc etc
click that it registers as "unknown device"
Which has no drivers
"No drivers are installed for this device.
If you are having problems with this device, click Troubleshoot to start the troubleshooter."
are there any extra drivers needed for the actual device? and yes i have tried the update drivers option doesnt seem to find anything.
EDIT:
I forgot to say, i did manage to hard reset and get it working, its just incredibly slow and unreliable and im still looking to flash it.
'I tried the bootloader again and i did get the USB in the corner, but, it still refuses to sync or flash (i also reinstalled activesync and everything necessary)'.
Ok,some encouragement here,let me explain,while flashing a rom,you don't require to establish connection through active sync,infact,while flashing active sync is automatically disabled by ruu.. itself.ok
now lets try this,if you say that when in bootloader,usb is shown,then kill the active sync altogether for awhile being.Before connecting your phone to the pc via usb,disable active sync,right click active sync icon in the task bar, click 'connection settings' and remove check from 'Allow usb Connection' and 'open active sync when my devics connects'.than open 'Task Manager',click processes tab and find 'wcescomm.exe' process,hit 'end process',this will close active sync altogether.
Now if you have the official Rom of your carrier,if not download it from your carriers official website.Go into bootloader mode on your phone,connect phone to pc vis usb,when it shows usb there open rom and run RUU..,hope it'll flash your device,it's a faint try but no harm trying,good luck
Go to my thread linked above...it is actually discussed...
In a nutshell...
go to device manager and tick "show hidden devices"
scroll down to usb, uninstall "unknown device"
using task manager kill wescomm.exe (or something to that name)
shut down any firewall
shut down your pc, AND pull the plug for at least 30 seconds
replug the power to pc, boot up
check in task manager to make sure wescomm.exe didn't restart, kill it if it did
make sure firewall didn't restart
now force bootloader
plug in phone
look for corner usb
work quickly...reflash your phone before you lose any connection
"the update utility cannot connect to your pda phone..." etc
doesn't seem to be working, but i still do get the usb in the corner
dariushuntly said:
"the update utility cannot connect to your pda phone..." etc
doesn't seem to be working, but i still do get the usb in the corner
Click to expand...
Click to collapse
If you followed the directions, you should be able to flash the phone. Mine was tempermental but it DID flash. You need to make sure you follow the directions...and one more thing...
turn off your phone, unplug it, remove the battery for 10 seconds, power it on, then plug it in...after doing all the other steps. That's what got mine to read...and flash
I have a Cingular 8125 that boots up to the second splash screen and then freezes. The second splash screen just has the network logo, in this case T-Mobile. There is no indication of SPL, IPL, etc., just T-Mobile. I can get it into Bootloader and it shows IPL 2.26 and SPL 2.26. If I then connect the USB, it displays USB. If I disconnect the USB, it still displays USB. I have tried to reinstall T-Mobile and AT&T while in Bootloader and I get an error message stating that the device is not connected. I have also tried to install 1.05, Button's ROM and Munn's RUU while in Bootloader and get the same error message.
Why does USB pop-up when it is connected, but still shows USB when it is disconnected? Why won't the network ROM install when it is in Bootloader?
I am stymied!!
I am reposting this question because I didn't receive any answers. Somebody out there must have a suggestion.
try removing the SD card and then uncheck "USB connections" under active sync and then try dude it worked for many people...
valentinovamsi said:
try removing the SD card and then uncheck "USB connections" under active sync and then try dude it worked for many people...
Click to expand...
Click to collapse
Tried it. No joy.
I I can clearly see that this is a known issue, I have tried to flash it via the bootloader (from holding power, camera and reset button) but every guide i have followed says that i need to connect it via activesync to do that, and i cant because windows doesnt detect it as a phone it just detects it as a "HTC usb sync".
I really am stumped on what to do.