Dopod D810 / Trinity p3600 stuck at wm6 boot screen - P3600 Software Upgrading

I I can clearly see that this is a known issue, I have tried to flash it via the bootloader (from holding power, camera and reset button) but every guide i have followed says that i need to connect it via activesync to do that, and i cant because windows doesnt detect it as a phone it just detects it as a "HTC usb sync".
I really am stumped on what to do.

Related

Need help...please...

Hi..
I've bought a SIM blocked Trinity.
I've tried to use POF's unlocker, but I cannot get the thing to pass through the bootloader stage.
Everytime I get the device into bootloader, I try to install the newer radio rom, unchecking first the USB conections in Active Sync, but I always receive the message to check if the device is conected into the USB cable!!!
I use XP by the way...
Can anyone tell me a way to get through this stage???
What is your SPL version? Press on/off button + camera to enter in the tricolor screen.
HTC Trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/20284524...12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
http://rapidshare.com/files/203126613/1.56.70.11.exe

SOLVED! Bootloaders as far as it goes...Will not load any flash with SSPL or HSPL.

About a year-ish ago windows stopped working on my spv3600 m700 Trinity. I looked into reflashing the phone & put a copy of schaps 4.30 striaght onto the fone no problems.
I now want to upgrade the rom again & can get it into the bootloader screen ok. My problem is that this is as far as I can get. I've even tried the minisd trick but I see loading box very briefly flash up on the screen & thats it...still in bootloader mode with serial but nothing else happens.
The fone is not bricked & if I reset it will load windows. I've tried the original flash & bootloader. Soft (SSPL) & hard Bootloader technique but to no avail.
Has anyone got any other solutions? Many thanks in advance, its sending me crazy!!
Ok I sorted the first problem of using SDcard to flash .MBH files. It was down to the miniSD card format not being FAT32. I reformat the card as FAT32 & then bootloader progressed to installation stage.
...now I have a new problem... i'm stuck in bootloader mode SPL 1.07.0000 IPL 0.50 after I used SSPL from my mobile in windows mode to get the 1.07ds override bootloader. This allowed me to flash the Radio to the latest chinese version. I then used this program again to Flash to windows 6.5 & then half way through it rebooted to the bootloader tricolour screen.
The problem is that now that windows is gone I can only run the standard bootloader SPL 1.07.0000 with the phone. If I try & upgrade a cooked ROM it comes up with an error code on the mobile. If I try an official version it checks the ROM & then says "not allowed".
Is there a way I can change the bootloader through the card SD? I can't either get the bootloader to change from serial msg to usb...doesnt matter how many times I plug in the USB & i'm using XP. Is there a way to force it into USB?
I've tried putting "Des crash proof SPL" ,"Hard SPL", "Hard SPL 1.20" onto SDmini card as TRINIMG.NBH bootloader loads then comes up with 00068002 error i presume on screen
I've tried putting official upgrades "RUU Trinity DOPODA SIA WWE...Ship.EXE rom" & "RUU Trinity HTC WWE .........GPS.exe rom" onto SDmini card as TRINIMG.NBH, bootloader loads, . . .checking, then displays "not allow" & "00028002" on screen! Now i'm really stuck!
Any help would be greatly appreciated!
looks pretty much the same like my trinity right now...
help would be very appreciated
Solved.
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Still on bootloader with error 0068002
can't ran anything.
Please help......
SOLVED:::::::: sorry
Trinity bricked , pls help ...
steve54321 said:
Finally worked out why my phone would not change from serial to usb on the bootloader screen. Its all down to the power from usb lead...luckily I have a double usb lead which I use for an external hard drive. Two usbs plugged into my laptop provides twice the current...as soon as I used this lead tadaaa, the phone comes on & is recognised by windows xp even when its in bootloader mode. If you don't have a lead try using a different computer...just incase the usb output is crap!
From here I then ran the unbrick / exploit program which you have to run two/three times but then this will put the phone into a bootloader which allows you to flash the phone with any ROM.
Hope this info is of any help.
Click to expand...
Click to collapse
Hi , there ,
I am finding myself into the same situation but I do not realy get you : how You managed to get out of the bootloader mode where it says :
TRIN100
IPL-0.50
TRIN100
SPL-1.07.0000
Can you , pls, be more specific , cause I am a newbe who bricked his Trinity a week ago :::
Blocked with error 0068002
Hello, after I install nAr.23016.FRA.IE8-CHOME on my sfr s300+, I'm blocked on the first page HTC, etc...When I put the S300+ under bootloader (photo and power button action), I plug the USB and I itry to flash;result is a reboot. I try with TRINIMG.NBH and result is error 0068002.
I need help to resolve this problem.Can u help me? Regards.
dan (excuse my bad english)

Need assistance please

Hi,
I have a Rhodium and so far I have successfully flashed a lot of Roms untill today...
I am trying to flash another Rom via ActiveSync, so I have connected my phone to my PC, than run the CustomRuu.exe like always, but I am stuck at 0%.
I decided to flash using the SDCard and renamed the ruu_signed.nbh to RHODIMG.nbh and than I´ve enter in the BootLoader Mode, the device tries to load the Rom, but I´ve got a white screen saying "loading..." and stays like this forever.
I cannot even HardSPL the device. I run the Rhodium-HardSPL_V2_00R3.exe but i can not get the device properly synced.
I though I had an internal memory problem so I´ve formated it using a new tool found here: http://forum.xda-developers.com/show...12&postcount=1.
But now I´ve lost everything and I can not flash any Rom with activesync, always the same problem, stuck at 0% and then the message - "Error [276] : update error.", and if I flash from SDcard a white screen saying "loading..." and stays like this forever.
EDIT:
Can not HardSPL automatic flash, because could not get the device properly synced.
Can not HardSPL with Manual flash, stuck at 0% and then the message - "Error [276] : update error.#
Any help please.
Thanks
I have a Rhodium and so far I have successfully flashed a lot of Roms untill today...
Click to expand...
Click to collapse
Then I assume you already have hard-spl on your device installed. So trying to install it again will fail.
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version* Is this the hard-spl version that you have?
You didn't mention which rom you tryed to flash. Did you try other roms?
Lennyz1988 said:
Then I assume you already have hard-spl on your device installed. So trying to install it again will fail.
*Go into BootLoader Mode (do a Soft Reset while holding the "volume down" key on the left side of the device. Keep holding the "volume down" key until you see tricolour screen which is the bootloader mode, then release it) and verify the screen shows 0.85.OliNex, which is the HardSPL version* Is this the hard-spl version that you have?
You didn't mention which rom you tryed to flash. Did you try other roms?
Click to expand...
Click to collapse
Thanks for your reply,
Yes , you are right I have already HardSPL installed - SPL-0.85.0linex.
I have tried several Roms even the Rhodium stock Rom. If I flash via activesync I get stuck at 0% and if I flash from the SDCard (RHODIMG.nbh) I get a white screen saying "loading...." with no action.
This is strange as I´ve flash so many roms so far
Have you reset both your device and computer before connecting?
Just leave it in Bootloader mode and connect it to your computer and then try flashing.
As long as you put the device in bootloader mode, you do not have to get it to sync. I've done this many times when a flash didn't go right for some reason (like I forgot something when I cooked it ).
jaxboater said:
Have you reset both your device and computer before connecting?
Click to expand...
Click to collapse
rgb-rgb said:
Just leave it in Bootloader mode and connect it to your computer and then try flashing.
As long as you put the device in bootloader mode, you do not have to get it to sync. I've done this many times when a flash didn't go right for some reason (like I forgot something when I cooked it ).
Click to expand...
Click to collapse
I did both things with no luck.
I have put the device in bootloader mode connected to the computer then I´ve run the customRUU.exe but I am always stuck at 0%
This is the info I have in the tricolor screen:
RHOD100 32M SS-BC
SPL-0.85.0linex
MicroP(LED) 0x0A
MicroP(KEY) 0x04
TURBO HW/TURBO SW
TP MFG DATA
501,529 794,848
797,208 217,213
210,853 Calibrated
I will put the device in the AC power all night to see if this is a battery issue.
Thanks
have you used a different usb cable just a suggestion
jaredcg said:
have you used a different usb cable just a suggestion
Click to expand...
Click to collapse
I had the same thought and I have used a different cable but the results are the same.
just my 2 cents i have done it before try to uninstall the driver from computer when you are in tri-color mode in the device manager then unplug the usb and replug in the same usb port if doesnt work try other usb port
JEANRIVERA said:
just my 2 cents i have done it before try to uninstall the driver from computer when you are in tri-color mode in the device manager then unplug the usb and replug in the same usb port if doesnt work try other usb port
Click to expand...
Click to collapse
I would try this first as posted by jeanrivera.
Also maybe you're customruu is somehow broken? Try downloading a new one. Also I don't know if it helps but when you flash via customruu do you have the image named ruu_signed.nbh? I don't know if it matters what kind of name it has, but it's just a thought

[PROBLEM] Bricked my Blackstone

Hi All.
I've had my flashed severtal times with the new ROM and never had any problems with it (apart from ROM itself not being perfect).
Yesterday I've cooked myself a plain ROM and flashed phone with it. Flash took less than a minute and my phone isn't starting any more. I've checked NBH file and it's only 6 MB!
At the moment all I can do it to is to try to turn it on, it stops on the 'Smart Mobility' screen with red info on the bottom. Info reads:
R 1.14.25.24
G 52.64.25.34U
D 1.59.48753
When I start my phone with Vol Down button pressed it goes to tricolor and when I continue to hold Vol Down I get white screen with message: Loading: No Image File! showing on the screen briefly and back to tricolor.
No problem you say - flash another ROM. But at the moment my phone doesn't connect to my PC. Cable tested with another HTC - works. When I connect it I get USB on the screen but Flashing utility doesn't detect the phone.
When I try to Hard Reset the phone it just starts normally. So Vol Up + Vol Down + Power doesn't work at all. All I have is smart mobility and tricolor.
Info from Tricolor:
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (LED) v6
and on the bottom either Serial or USB.
Question is:
is there anything I can do to revive my phone? Is there any way to flash it without USB connection? If yes, how do I do it?
Thanks in advance,
There is a way of flashing from SD card if you have HSPL (you do... OliNex).
Please do some search...
if it displays usb in tricolor you can flash a rom with CustomRUU from there. its not bricked
Put BLACIMG.nbh on the root of your SD card and enter bootloader mode, it'll detect it and ask if you want to flash it - press power button to confirm.
Dont connect your phone to your computer.
Hold down the Volume down button and hit the power button.
Your entering the tricolor boot screen and at the bottom the word "Serial".
Now connect you phone to your computer with te USB cable the word serial disappear and now it says USB.
Now you can normally flash/update your phone.
Thank for all your answers.
Problem still lasts, tried everything I could, including trying another computer. I've tried SD card flashing but couldn't get past tricolor. Everytime I tried all I got was No image file! and nothing.
In desperate act of dying I've went to my neighbour and borrowed his old Win XP laptop and it worked... Currently flashing new ROM to it.
What I cannot understand is why my computer (iMac running Windows on parralels), my laptop (Win 7) and my second laptop (Win Vista) couldn't detect the phone. I've succesfully flashed it before using all three machines, including virtualized Win 7 on my mac :/
Any ideas why it stopped working? I'll try to connect it again when ROM will be fully flashed and let you know.
Thanks for your help anyway.
Cheers,
Why don't you try shipped ROM, it may do the trick.
Get the original shipped ROM from HTC site or from XDA site.
Extract the content in some directory
Rename ruu_signed.nbh to BLACIMG.nbh and copy it on root folder of your SD card.
Now start your phone holding Vol down button.
Fingers crossed to to start flashing
Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,
yeramihi said:
Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,
Click to expand...
Click to collapse
Glad you got this sorted. As your issue is now rectified I'm closing this thread

[Q] My Windows 6.5 dual SIM phone (T5388+) not booting

I have a chinese phone (clone of touch diamond 2) T5388+, with dual sim. The OS is windows 6.5
when i install a software, it rebooted, but windows screen not coming. I tried many times restarting, but the same. When I connect to PC, the active sync says 'your device is locked, please unlock'. My nothing comes on the screen. when I click the volume button, the volume screen appears. nothing more.
How can I flash this ROM? What software I need for this?
Find a ROM for the clone on the forums and install it via the 'volume screen' (I think you mean the tricolor bootloader screen).
Hi,
I have managed to ge the ROM and I flashed it. It was simple and successful. Thanks to solonomi.com

Categories

Resources