Hi..
I've bought a SIM blocked Trinity.
I've tried to use POF's unlocker, but I cannot get the thing to pass through the bootloader stage.
Everytime I get the device into bootloader, I try to install the newer radio rom, unchecking first the USB conections in Active Sync, but I always receive the message to check if the device is conected into the USB cable!!!
I use XP by the way...
Can anyone tell me a way to get through this stage???
What is your SPL version? Press on/off button + camera to enter in the tricolor screen.
HTC Trinity original ROM
Here is the original HTC Trinity ROM:
http://rapidshare.com/files/20284524...12201_Ship.zip
1. Press on/off button + camera button + reset (using the stylus)
2. You should now be in tricolor screen.
3. Connect the usb cable.
4. Make sure you have activesync runing.
5. Install the rom provided in the link.
In the link you will find rom+radio. (Radio version 1.20)
Here is a newer radio version 1.56:
http://rapidshare.com/files/203126613/1.56.70.11.exe
Hi All.
I've had my flashed severtal times with the new ROM and never had any problems with it (apart from ROM itself not being perfect).
Yesterday I've cooked myself a plain ROM and flashed phone with it. Flash took less than a minute and my phone isn't starting any more. I've checked NBH file and it's only 6 MB!
At the moment all I can do it to is to try to turn it on, it stops on the 'Smart Mobility' screen with red info on the bottom. Info reads:
R 1.14.25.24
G 52.64.25.34U
D 1.59.48753
When I start my phone with Vol Down button pressed it goes to tricolor and when I continue to hold Vol Down I get white screen with message: Loading: No Image File! showing on the screen briefly and back to tricolor.
No problem you say - flash another ROM. But at the moment my phone doesn't connect to my PC. Cable tested with another HTC - works. When I connect it I get USB on the screen but Flashing utility doesn't detect the phone.
When I try to Hard Reset the phone it just starts normally. So Vol Up + Vol Down + Power doesn't work at all. All I have is smart mobility and tricolor.
Info from Tricolor:
BLAC100 32M
SPL-1.56.OliNex
MicroP-Blackstone (LED) v6
and on the bottom either Serial or USB.
Question is:
is there anything I can do to revive my phone? Is there any way to flash it without USB connection? If yes, how do I do it?
Thanks in advance,
There is a way of flashing from SD card if you have HSPL (you do... OliNex).
Please do some search...
if it displays usb in tricolor you can flash a rom with CustomRUU from there. its not bricked
Put BLACIMG.nbh on the root of your SD card and enter bootloader mode, it'll detect it and ask if you want to flash it - press power button to confirm.
Dont connect your phone to your computer.
Hold down the Volume down button and hit the power button.
Your entering the tricolor boot screen and at the bottom the word "Serial".
Now connect you phone to your computer with te USB cable the word serial disappear and now it says USB.
Now you can normally flash/update your phone.
Thank for all your answers.
Problem still lasts, tried everything I could, including trying another computer. I've tried SD card flashing but couldn't get past tricolor. Everytime I tried all I got was No image file! and nothing.
In desperate act of dying I've went to my neighbour and borrowed his old Win XP laptop and it worked... Currently flashing new ROM to it.
What I cannot understand is why my computer (iMac running Windows on parralels), my laptop (Win 7) and my second laptop (Win Vista) couldn't detect the phone. I've succesfully flashed it before using all three machines, including virtualized Win 7 on my mac :/
Any ideas why it stopped working? I'll try to connect it again when ROM will be fully flashed and let you know.
Thanks for your help anyway.
Cheers,
Why don't you try shipped ROM, it may do the trick.
Get the original shipped ROM from HTC site or from XDA site.
Extract the content in some directory
Rename ruu_signed.nbh to BLACIMG.nbh and copy it on root folder of your SD card.
Now start your phone holding Vol down button.
Fingers crossed to to start flashing
Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,
yeramihi said:
Hi again.
I can confirm that due to flashing my phone with that odd 6MB ROM I could not connect it to any computer running Windows Vista or Windows 7. Strangely enough - it worked with Windows XP Professional. I have managed to flash my phone again on it using custom ROM from this forum.
Cheers,
Click to expand...
Click to collapse
Glad you got this sorted. As your issue is now rectified I'm closing this thread
I was make restart for my PDA HTC Tytn II and it didnt open only i see The Starting Screen Windows Mobile version 6.1 and i was tray to upgrad the ROM the PC cant see the HTC ?
any one can help my ???
Have you flashed any HardSPL?
If the PC doesn't see the phone, maybe you have to enter the bootloader first before could upgade your ROM.
1. Hold power + camera + reset button to enter the boot loader.
2. You will see a tri color screen with "Serial" text at below and then connect your USB cable until the text changed into "USB"
3. Flash your preferred ROM by executing Custom RUU.exe on your PC.
Thanx
Thanks man.
With this solution i dont have to buy another, thanks to you.
I I can clearly see that this is a known issue, I have tried to flash it via the bootloader (from holding power, camera and reset button) but every guide i have followed says that i need to connect it via activesync to do that, and i cant because windows doesnt detect it as a phone it just detects it as a "HTC usb sync".
I really am stumped on what to do.
Hello everyone. I am in real trouble here and I will explain why. I have recently tried to get the custom recovery with a locked bootloader (philz touch) on my device by following a thread. As far as I know I followed the guide properly but when my device rebooted it bootlooped 10x and then when my device booted it froze at the lock screen and restarted. now my device bootloops several times before boot and once it boots I get 1min at the most before it freezes and restarts. Also sometimes it fails to boot at all and it gets stuck in an infinate bootloop and I have to pull the battery. when I connect it to my laptop with a usb cable it is only recognised if the device boots but I only have a few seconds because the phone reboots and disconnects when I try and enter recovery or download mode my screen goes black and the only way to get of this is to pull the battery. I have also tried to connect to my laptop when on this black screen but i have had no success. If I turn the phone off and connect it to my laptop via usb when I am on the "battery charging screen" it appears on my computer as a unknown usb device. i do have all the drivers ect. my device is rooted with baidu root if that helps. ive heard of a little device called a usb jig would that be useful to me? sorry if this is not worded very well or looks like a book. Im not a idiot but not quite "tech savy" i would like to think i am somewhere in the middle. I have been using this site for years for various devices and always managed to succeed. help would be apprecited. Thanks
UPDATE: I have tried to factory reset from the settings but for some reason the button is greyed out and it wont let me press it! also I cannot connect to wifi or mobile data these are greyed out aswell and when I try to connect via the sliders in the settings menu they are also greyed out!!!
ethan8494 said:
Hello everyone. I am in real trouble here and I will explain why. I have recently tried to get the custom recovery with a locked bootloader (philz touch) on my device by following a thread. As far as I know I followed the guide properly but when my device rebooted it bootlooped 10x and then when my device booted it froze at the lock screen and restarted. now my device bootloops several times before boot and once it boots I get 1min at the most before it freezes and restarts. Also sometimes it fails to boot at all and it gets stuck in an infinate bootloop and I have to pull the battery. when I connect it to my laptop with a usb cable it is only recognised if the device boots but I only have a few seconds because the phone reboots and disconnects when I try and enter recovery or download mode my screen goes black and the only way to get of this is to pull the battery. I have also tried to connect to my laptop when on this black screen but i have had no success. If I turn the phone off and connect it to my laptop via usb when I am on the "battery charging screen" it appears on my computer as a unknown usb device. i do have all the drivers ect. my device is rooted with baidu root if that helps. ive heard of a little device called a usb jig would that be useful to me? sorry if this is not worded very well or looks like a book. Im not a idiot but not quite "tech savy" i would like to think i am somewhere in the middle. I have been using this site for years for various devices and always managed to succeed. help would be apprecited. Thanks
UPDATE: I have tried to factory reset from the settings but for some reason the button is greyed out and it wont let me press it! also I cannot connect to wifi or mobile data these are greyed out aswell and when I try to connect via the sliders in the settings menu they are also greyed out!!!
Click to expand...
Click to collapse
Hi, you need an unlocked bootloader for it to work properly. You can find how to unlock the bootloader by going to Sony's website and see where it says to unlock the bootloader or just look for it on Google. To get back to the stock rom (Android 4.4.2 KitKat), you will need Flashtool and the stock rom. You can find the rom on Google by just typing "sony xperia e1 d2005 stock rom". To get the recovery just try looking for it on XDA. And USB Jig will not work for Sony devices. USB Jig is only designed to work with Samsung devices.