Database Develop

BT a2dp+hands free problem

Hi all!
I use my alpine with Motorolla HT820 headphones.
As that device allows multipoint connection - I connect it with a2dp and handsfree profile. and it works - I listen to music, and can recieve calls.
But after I recieve a call - I don't hear music anymore - I need to reconnect headphones via a2dp to hear music again....
any solution? maybe I have old BT stack patch?

A2DP but no Headset icon or Sound in Headphones

Hello
I am a beginner both with the Kaiser and the A2DP . I have paired my Jabra 8010 BT correct and when I push the menu button I get the voice speed dial page with " no tag selected " so I assume my connection to the Kaiser is okay.
But when I want to use the stereo function for HTC Player or Windows mediaplayer the sound is not switching from the speaker to the headset .
Any idea what settings or steps I need to do to get the sound to the BT headset ?
There is as well no little Headset icon in the tool bar as set in page 176 of the manul .. (see I am reading first !)
Thanks for any help .
Freecall

Did you pair the Jabra for A2DP? In the Kaiser's BT settings for the device, you should see two services, Hands Free & Wireless Stereo, and both boxes should be checked. If you see only one service, you'll have to re-pair the Jabra; if you see both, but Wireless Stereo isn't checked, check it.

hmm it looks more like a bug or a intended function.
I have both hands free and stereo profile.
When I delete the bluetooth pairing and re-pair it works like it should:
- Headset icon in menu bar
- when media player start the sound is automatic transfered to head set
but now ... when I switch out BT in the coms manager and switch it on again:
- no headset icon appears at all
- no transfer of sound from media player to head set
even the handbook says (page 176) run steps 1-3 of the paring again.
Does this means I need to re-pair mu stereo headset each time I want to have music transfered to the Heatset after switching off BT on the phone ???
That can not be true or ?
Freecall

confirmed ... looks like before any usage of wireless stereo (after switch off/on BT) I need to go each time into the connection manager, bluetooth settings, left tab on Jabra, select set as stereo ... if this is done the headset Icon appears again in the menu.
I am the only one to whom this looks very complicated to just listen to your podcast ... ?
Why cant the BT profile hold the information that my headset is BT stereo ???
Freecall

I seem to be having the same problem. Every time I turn on my Bluetooth, and every time I make a phone call, I have to un-check wireless stereo, save, then re-check it in order to listen to music via my Jabra BT8010.
I wish there was a fix for this.

Use A2DP toggle to re-connect from the today screen.

Neat BT stuff

Hi;
Didn't find too many threads about the neatness of the Kaiser BT with certain devices. Though my main memory gets still eaten up like ther's no tomorrow I played a little bit today during lunch-time.
1.) External speaker/handsfree set:
I bought a blueant supertooth light since we have several phones in the family That's the most convenient way to have a mobile handsfree and no wires and literally NO installation.
Enable BT at the Kaiser, use BT-Audio (attached) and re-route device speaker output to the bluetooth handsfree speaker.
Voila, the TomTom Lady is talking to you load and clear. Eats up some battery but for that you have a car charger - NEAT!
Should work with popular motorola T305 and others as well.
2.) Car with AUX/iPod input:
Get an A2DP bluettooth kit (I have the i-tech clip R35) get a male/male 3.5 mm jack cable (preferable a little longer that you can use the mic), connect to the car. Not only that you can listen to the music stored on the kaiser through your car stereo ... call comes in, take call and listen through your speakersystem OR listen to regular radio or music, call comes in, press aux at your radio and ... talk.
NEAT - Thought I should share this!

doesn't seem to want to work for me. i get a " failed to enable BT audio" window when i try to use it

Could have a better user interface, I agree.
Do you use an external BT speaker/microphone or do you try to use AUX for your car stereo. If you use the car stereo NOTHING is required as long as you have an A2DP bluetooth set with external earphone jack.
With the car kit these are the steps that worked for me:
Enable BT in CommMgr?
Click BTAudioToggle
Click BTAudioOn
I put shortcuts in my menu one could even write a script or macro...

doesnt work for me

Post your config and what you did/do perhaps I can help

same thing as post #2,unzipped to SD, make shortcut,tried shortcut and direct file and both gave that error message

What speaker/headset do you have?
If it is a headset is it A2DP compatible?

jabra bt5020,dont think it's compatible

Hmmm
Bluetooth compliance: Bluetooth version 2.0 specifications
Supported Bluetooth profiles: Bluetooth headset and hands-free profiles
Try the following:
- Soft reset after you disabled bluetooth (to have a clear starting point)
- Enable bluetooth
- Check if it is connected
- Open settings
- Tap and HOLD on your headset
- Set as handsfree
- Set BTAudio ON (don't use the toggle)
- Open TomTom or whatever gives you some voice commands and check.
If it doesn't work ... well it doens't work with your headset ... sorry
If you REALLY want the function buy an itech or so for ~ 26 bucks

a2dp auto-enable

Whenever I turn my Cardo S-2 a2dp stereo bluetooth headphones on, the headset bluetooth profile kicks in, and calls immediately go to the headphones.
Can this be done with the bluetooth stereo headphones profile for listening to music as well? Currently, I have to click on BatteryStatus's bluetooth icon in the systray, click on a2dp, wait for the profile to kick in, and turn the volume from vibrate to full. It's a pain in the ass every time I want to listen to music.
Ideally, if it's not built into the OS, there should be a little systray app that would poll to see if any headphones are within range, then automatically enable a2dp and set the volume for you. When they disconnect, it would go back to your previous volume setting, not just 0 volume like it does now.

I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?

kemp509 said:
I don't know about the Cardo's but when I hook up my Motorola S9 my music is automatcally hooked up as well. When you sinked your Cardo with your phone through the Bluetooth conection settings did you set them up as handsfree and Stereo, or just Handsfree?
Click to expand...
Click to collapse
Yes, it was set up as stereo (as well as handsfree), but music does not automatically play in the headphones when they are turned on. I have to start a2dp and take it off vibrate in order to play music.

Same problem here. I solved it by installing A2DPToggle, and making a shortcut to turn the music on the headset in the system tray through Traylaunch

I also use A2DPToggle and use the plugin that stays on the Today screen to control when I use it.
But just like this thread ( http://forum.xda-developers.com/showthread.php?t=351697 ) you can find all sorts of different options.
MBN

Bluetoothe stereo headsets not in media audio

i want to report an issue/bug that i've encountered yesterday when i purchased jabra bt620s bluetooth headset for listening music and making phone calls with my magic with ION rom.
when i connect the paired headset with the bluetooth enabled from before, the device only connects for a few seconds in MEDIA AUDIO mode, then remains only in phone audio mode, i have to disable and reenable the bluetooth on the magic to full connect the headset. annoying.
inf instead i enable the bluetooth on the device after that i've powered the headset on, the connection is full from the beginning....
result: i cannot let the bluetooth on in my magic.. because it's useless... i have to go then in preferences, wireless, bluetooth settings, ecc, ecc anyway =(
anyone with this problem?!?!
do you thik this is an ION ROM problem or bug?!?

try holding down the tap on the device in bt settings. then select to connect to media only. this works with my G1.