Database Develop

A2DP but no Headset icon or Sound in Headphones

Hello
I am a beginner both with the Kaiser and the A2DP . I have paired my Jabra 8010 BT correct and when I push the menu button I get the voice speed dial page with " no tag selected " so I assume my connection to the Kaiser is okay.
But when I want to use the stereo function for HTC Player or Windows mediaplayer the sound is not switching from the speaker to the headset .
Any idea what settings or steps I need to do to get the sound to the BT headset ?
There is as well no little Headset icon in the tool bar as set in page 176 of the manul .. (see I am reading first !)
Thanks for any help .
Freecall

Did you pair the Jabra for A2DP? In the Kaiser's BT settings for the device, you should see two services, Hands Free & Wireless Stereo, and both boxes should be checked. If you see only one service, you'll have to re-pair the Jabra; if you see both, but Wireless Stereo isn't checked, check it.

hmm it looks more like a bug or a intended function.
I have both hands free and stereo profile.
When I delete the bluetooth pairing and re-pair it works like it should:
- Headset icon in menu bar
- when media player start the sound is automatic transfered to head set
but now ... when I switch out BT in the coms manager and switch it on again:
- no headset icon appears at all
- no transfer of sound from media player to head set
even the handbook says (page 176) run steps 1-3 of the paring again.
Does this means I need to re-pair mu stereo headset each time I want to have music transfered to the Heatset after switching off BT on the phone ???
That can not be true or ?
Freecall

confirmed ... looks like before any usage of wireless stereo (after switch off/on BT) I need to go each time into the connection manager, bluetooth settings, left tab on Jabra, select set as stereo ... if this is done the headset Icon appears again in the menu.
I am the only one to whom this looks very complicated to just listen to your podcast ... ?
Why cant the BT profile hold the information that my headset is BT stereo ???
Freecall

I seem to be having the same problem. Every time I turn on my Bluetooth, and every time I make a phone call, I have to un-check wireless stereo, save, then re-check it in order to listen to music via my Jabra BT8010.
I wish there was a fix for this.

Use A2DP toggle to re-connect from the today screen.

TomTom7 and Car Holder -No Sound!!?

Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?

groover71 said:
Hi all!
I have TomTom7 installed which is working fine (almost).
When I place my Diamond in the car holder (three way output w. USB-Charge/USB-Headphones/3,5mm Headphone) all sounds from my phone are muted (believed to be connected to a headphone I guess).
I could connect the phone to the car audio system via a 3,5 mm audio plug, but then I cannot listen to the radio at the same time as navigating with TomTom.
Is there any known way to solve this so the TomTom7 directions and warnings are always routed through the Diamond internal speaker?
Click to expand...
Click to collapse
i have this carholder too, it's from brodit right? It's true, the moment you plug in the diamond it thinks it's connected to a headset, so no sound from internal speaker. Ideal for listening to music when connected to your car stereo ofcourse, but when receiving a call you have to take out the diamond, because the sound goes through the car speakers (if the output is connected to your car stereo ofcourse) but you can't talk back because diamonds mic is also muted! I hope there is a way to solve this. Maybe a little program that allows you to direct sound and mic settings?

It's also a similar problem with the little USB to 3.5mm audio adapters, they make the diamond think there is a mic plugged in when there isn't and when someone calls you while you're listening to music, they cant hear you unless you unplug the headphones.
I've also noticed that when the diamond is in my car and connected to my bluetooth kit, the calls come via bluetooth but TomTom does not, this particularly annoys me, as when I'm listening to loud music I miss the speed camera alerts and also obviously cant hear the voice directions.
There seem to be some fairly serious shortcomings in this area. A simple set of options that let the user choose what he/she likes would be best.

Yepp Glenner, it is a Brodit car holder!
A program to solve this as you mention would be great!
Anyone got the skills to solve this?

Yesterday driving home from my work I noticed that the ring tone on an incoming call was heard even when the phone was placed in the holder...
So there must be a way to have the sound re-directed to the internal speaker???

Solved!
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!

Hi, this BT music doesn't seem to work with my car kit... My car kit supports HFP profile (Handsfree profile)...
What did you do exactly to make it work?

eadon said:
Try this little program http://www.freewarepocketpc.net/ppc-download-btmusic.html It sends audio from you diamond to either BT headphone or speaker. Just tried it and seems to work fine, but does need .netCF 2.
Best of luck!
Click to expand...
Click to collapse
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.

xavalon said:
if you rename btmusic.exe.config (not btmusic.exe!!) you can run it too with .NET CF 3.5
Trick i learned from the developer of BTMusic.
Click to expand...
Click to collapse
Rename to what?
I figured it out. Renaming btmusic.exe.config to btmusic.exe.configx does it.

Diamond - using in-car, few issues...

Hi All,
I'm wanting to use my Diamond in the car to replace both my old iPod and sat-nav, while still having phone functions available. There are a few things I'm not happy with, so I thought I see what other people are doing.
I have a car head unit with a direct 3.5mm line-in, which used to have the iPod on the end. The Diamond works fine plugged into this through an ebay 3.5mm\USB adaptor.
If I plug the 12v>USB charger in, I get a whine over the audio - not a big problem, it's just a ground-loop, so I'll stick an isolating transformer in-line.
The main problem I have is switching between the internal speaker and the external output. If I want to have the radio on, rather than MP3, I have to unplug the adaptor, and plug the charging cable in direct, so that I can keep the battery charged - not ideal. This way I can hear the TomTom voices through the internal speaker, but it seems wrong to have to swap leads this way.
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?

I think one of these car holders has an option to plug in charger and usb-3.5mm jack adapter at the same time....
http://www.dsldevelopments.com/brodit/Holder/HTC+Touch Diamond-Brodit-Holder.asp
If i had the skills i'd try to figure out a hack to pause/mute the mp3 and mute satnav when in a call... but I don't.

That's not the problem - I can plug in the charger and 3.5mm audio at the some time, but that redirects all the audio to the car stereo, and disconnects the mic. Removing the adaptor and plugging in just the charger enables the microphone, but all my MP3s then are played through the internal speaker.
What I need is a utility to force the internal microphone to be used _all_ the time, and let me choose when to use the internal speaker when a headset is detected.

I don't suppose anyone knows how the Diamond recognises a headset? Is there a resistor link across a couple of the pins in the 11pin connnector? I'm just thinking I could make up a cable with a switch to break that contact, and 'virtually' disconnect the headset when I want the radio, or need the microphone active during a call.

You could try this program. It seems to be a virtual switch between the earpiece and external speaker. I use it a a solution for skype and other voip programs that only work through the external speaker, but the works the other way as well.

headset instaled but need phone mic allways enable
Hello,
Kaysee_sw said:
The other main problem is if I have MP3 and TomTom all through the stereo, and I get a call, I can hear the call over the stereo, but can't speak, as the Diamond is expecting an external microphone.
I guess what I need is a utility to force only the internal microphone to be used, and to allow me to force the internal speaker when I want to use the radio. It there such a thing?
Click to expand...
Click to collapse
I have the same issue of kaisee.
I use the diamond as mp3 player in my car stereo (aux-in) and i need the mic allways available to use the phone without disconect the usb or audio plug.
In my old magician this worked just fine becouse the mic was allways available.
Is the .exe posted by dctech the answer(thanks man) ? has anybody tested ? is it reliable or there is another solution?
Thanks

You need a proper bluetooth car kit to allow this. Parrot ones are very good. If you want to listen to music as well as phone calls and sat nav i would suggest that you get one with both handset and A2DP bluetooth profiles. There is a workaround app you can use to get music through a car kit with just a handset or headset profile but the quality is mono and very poor

Wireless sterto via bluetooth to car stero

Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?

Sounds to me like it's an issue with the stereo, not the Kaiser.
Perhaps try disabling the handsfree service (for that pair) on the Kaiser? I can't remember exactly if you disable certain services.

cotc2001 said:
Quite a while ago I bought a Sony BT3600U car stero as it was bluetooth enabled so I could stream music from my Kaiser direct to the car speakers.
All was working well until I moved the car stereo to my new car.
Now although it's all paired up fine when I turn on the car stero it just links to the handsfree bluetooth but doesn't automatically go to wireless stereo.
Instead to get the wireless stereo to work I have to go into bluetooth settings click on xplode (which is the car stereo) and then choose set as wireless stereo.
I know from before that I managed to get it to automatically switch to wireless stereo when in range of the partnered car stereo but I can't for the life of me remember how I did it.
Does anyone have any clues?
Click to expand...
Click to collapse
I have an XCarLink and I have the same behaviour which is a bit annoying. I did a bit of searching a while ago but never got anywhere. If there is an (easy) answer to this I would be interested.
Andy

No it's def not the stereo , i've got it working sort of using A2DP toggle but it's not automatic.
Installed A2DP toggle and linked it to the audio manager on the kaiser.
So I just click the play button on my home screen and it kicks in the wireless stereo and launches the audio manager at the same time and it all works.
It's just annoying as I know that before I moved the stereo from my Honda civic to my hyundai Coupe all I had to do was just start audio manager and the wireless stereo kicked in automatically.

I've seen this too; I have a Sony BT5000 (basically the same as the OP), and I've seen it with both Wizard & Kaiser devices.

A bit more testing - expected behaviour?
I went out in the car earlier and had to do the 'set as wireless stereo' trick to get the BT streaming working with the XCarLink. When I switched off the engine and the head unit powered off the headset icon disappeared from the phone (which is normal) indicating there was no connection. I then left the car but left the bluetooth enabled on the phone instead of switching it off as I normally do. When I returned and drove off the partnership was re-established and the headset icon re-appeared and I was able to stream music etc without doing the 'set as wireless stereo' trick.
I tested this a couple of times and the behaviour was the same - i.e. leave BT enabled on the phone but switch on/off the XCarLink (car kit) and the partnership re-establishes each time with Wireless Stereo working. Switch BT off and then back on on the phone and you have to manually select Wireless Stereo.
Is this the expected behaviour or is there a trick to getting this working seamlessly?
Andy

That didnt' work for me. I even did a hard reset on my phone to see if there was something I had installed causing it not to relink.
If I had any hair, i'd be pulling it out by now
It's so frustrating knowing that I had worked it out once before but when it comes to the crunch you can't remember for the life of you how you did it.

Well i've been searching for an answer and found this here
http://forum.xda-developers.com/showthread.php?p=1318542#post1320648
@ debully>
There is a very simple fix to enable the Pioneer to recognise and connect to your phone. You see the Pioneer is searching for a phone or a Smartphone, the Trinity identifies itself as a PPC and so the Pioneer ignores it.
The Class of Device or CoD must be changed so that the Trinity identifies itself as either a phone or Smartphone.
If you change the Dword Data value in.... HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Bluetooth\SY S\COD"
to 5374476 (decimal) and set bluetooth to discoverable in your Trin, you should find that it connects automatically.
It took me 8 months to find this out.
PS. I don't have the problem with not hearing the callers.
Click to expand...
Click to collapse
But it didn't work for me - on the plus side though I did find a really cool mortscript from the same guy which when I plug the kaiser into my car cradle/charger it recognises the car stereo (but doesn't set to "wireless stereo" and automatically loads up my media player
My search continues
EDIT: Ok found that once the initial partnership for wireless stereo is done, if I turn off the radio and turn it back on again, the partnership is lost as usual until I press channel 6 (pause) on my head unit and then it comes back on.

Toyota Avalon (or other Toyotas) and Built-In Bluetooth...how to stream audio?

So, I have a new Toyota Avalon with built-in bluetooth. Was wondering if anyone knew of hacks, tricks, tweaks - software or hardware - to permit a2dp to show up when connected through bluetooth. It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Anyway to do this?
Also, for anyone with a Toyota and bluetooth, is there any way to get Microsoft Voice Command activated from the steering wheel? On all my external car bluetooth speakers, hitting the call button activates Voice Command. Doesn't do it with the built-in Toyota system...unless I am overlooking something.

BUMP....
Is there someone on the forum with a Toyota and bluetooth?
I am bummed about this...the only way I can stream or play audio is use the AUX jack which is fine EXCEPT it means that the phone cannot be used via the built-in blue tooth...the other party can be heard by the car microphones don't pick up my voice (presumably because the AUX connector somehow hijacks it???!!)
Any help would be appreciated.

freddiemac1 said:
It says HANDSFREE but doesn't show WIRELESS STEREO on my ATT TILT (stock rom).
Click to expand...
Click to collapse
That's what would happen if the car's BT did not support A2DP. My guess would be that your car only supports handsfree.

I'm in the same boat. I have an '07 Sienna and I have been looking for a way to connect AD2P bluetooth. So far, I'm having no luck.
I've thought about mounting my i.tech clip inside the dash to the Aux input. That means I'd have to modify the i.tech to work when power is connected. I would also have figure out a way to use the Aux port directly (with another device) if I wish. It is always something...
The '09 Toyota's support the AD2P.

works for me
so, I am in a '10 toyota. When I get into the car, it will pair up as handsfree, but does not show AD2P initially. For me at least, if I go to the BT tab on the audio screen, and press and hold the play button, it will start playing from the last playlist I was using. The steering wheel seek up seek down work to skip forward and back.
The first time I needed to initiate some music playing on the phone, and then tell the car to connect bluetooth through the BT tab on the audio menu, I think it hides the AD2P unless the phone requests it, and treats it separately from the handsfree connection.
I wish you luck- for short trips, it is great to be able to just sit down in the car, and have the radio play my mp3s without having to muck with my phone or cables.