Can anyone help? the "DATA CRASH Problem" - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I used to unlocked my MDA Vario, but now it show "Data Crash, please contact service", Can anyone help me, how to fixed the problem. I know IMEI-Check and fixed it, but need GBP20!! but any free software can do it?

Related

A problem gruuuuu. I can't fix with all tools

hi, everybody
I have a Wizard. But yesterday, when I turn on it, i see :" Data Crashes. Plese contact your service Center" with this title: "SIM LOCK" in the screen.
I used awizard, Lokiwiz to unlock it. But nothing at all
please help me
No body help me???? or not have solution to fix this prolem?
try to start it over without a sim-card....what happens...!?
it's oke and I can use it same a pocket.
I am experiencing the same issue. Did anyone find a solution to this? No matter what I use Lockwiz etc... It still wont work. Pls Help
Thx
Beside you is possible violated area CID.In the field of CID is found SIM and CID lock.The Area CID -unique for each device .Lokiwiz -does not calculate new this area -he only modernizes given in this area.
This inscription appeared After what action?
p.s.
There is command In bootloader which destroys the area CID and others.
Check Your IMEI.If IMEI does not coincide -possible you have started this command.
how can solve it?
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
arc said:
wlinsong said:
how can solve it?
Click to expand...
Click to collapse
I unsure that you this will help - but when I on C500 has deleted the area CID and got such message - I have restored only with the help of unlock http://www.imei-check.co.uk/ imei-check -anew calculates the area CID - unlock works through bootloader and so he does not modernize but anew calculates this area.
Try to talk with itsme in this forum -he has said that possible to calculate the new area CID -but has not described as.
p.s In Typhoon C500 and Wizard is used alike method SIM and CID blocking.
But aside from this unlock changes bootloader
For you http://www.imei-check.co.uk/m3000unlock.php
Click to expand...
Click to collapse
WOW worked like a charm! Thanks I thought I had a brick!
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
arc said:
I hope that this will help you.
I met several times like you situation on Wizard -but nobody did not describe after what action this has occurred.
It is Enough that 1 byte changed in the field of CID and she will be bad.
Possible during unlock or as a result other action (for instance action what other program ) has occurred the malfunction and something have changed this area.
Given area is not changed during flash ROM.
Click to expand...
Click to collapse
thanks very much
not solution to fix this problem!!!!!!!!!!!!!!!
Okay, I can report that paying for this software and running it on my MDA fixed the data crashes problem. I tried everything I could find on the web from using the lokiwiz02b and going back to the original rom... everything in every order I could think of. I flashed back to the original ROM which I downloaded from HTC America's site w/o the SIM in the phone, ran this software after shelling out 40 bucks, once it came back up I shut down, put my SIM in, booted and sure enough it worked.
Here is how I got in this position. I had a warranty replacement phone from a bad screen that kept getting out of calibration. I put my SIM and MINISD in and powered it on. I flashed to the 2.17 custom rom. It rebooted and I got the data crashes error.
Of course this is no guarantee. I see above where someone posted that it didnt fix their problem.
I just flashed up to the 2.21 custom rom and everything works fine.
I noticed after I started all this BS that there are two bad pixels on the replacement phone! SOB!
it worked for me too. but why does this happen in the first place? I only got this error from one of the two MDA's that I have flashed, the other one worked just fine.....
My screen died as well, got a replacement in. Blam drashed as well.
Ran all the loki stuff, and it IS the IMEI that causes it. Used this unlocker program, and it does work. I am on 2.17 now and about to load 2.21.
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
earljg said:
This is my last resort...
I tried every possible solution to solve this same issue and I am going to shell out the cash, but my problem is that I can't get my IMEI from my phone (#06#) like the imei-check website said to without my SIM in there. But with the SIM in there I can't type #06#. So how did everyone get their IMEI? Should I just use the number on the box, and just pray that it is the same as my phone?
Thanks
Click to expand...
Click to collapse
your imei is also in the back of the pda under the batery.
Cool, thanks!! Website didn't mention that
earljg said:
Cool, thanks!! Website didn't mention that
Click to expand...
Click to collapse
u can also get your imei by going to start/settings/system/device information and tap the indetity tab
Had a pain with this myself....had to cough up the money and unlock my phone that way but everything works fine now.

WIZARD: Invalid or missing SIM card

Could anyone help me?
If I switch on my MDA Vario it rejects my sim ... Invalid or missing sim appears on my screen.
I tried many sims, i cleaned contact in the phone, placed paper below the battery, but it didn´t work.
This error appeared when deinstal program Live PVR 2.7.the program always asked for approvement of the consonant before it asked for pin no.may there be any connection btw the error and this?
I tried to install ROM and Radio again, but it didnt help at all. Do you have any suggestions of how to repair it or if you have simillar experience could you please write me what to do ...
have you tried a hard reset?
if all else fails, sell the phone to me for $3

Problems with unlocked MDA Compact II

I have recently bought a MDA Compact II of a mate of mine. It used to be on T-mobile but has been unlocked and currently has an o2 sim. I have had some problems though. I cant seem to use my o2 GPRS settings in the device, or send MMS messages. When i take a picture using the camera, then go to send in a MMS the device freezes and i can not get back to the main screen. Also, when i try to send a file through MMS using the file manager, nothing comes up.
When i go to send a new message, i click on the menu button and the Insert Item field is greyed out. Does anyone know the problems i am having and how to fix them?
Thanks in advance for any help.
PS: Not much of a problem but wonder if it can be fixed anyway. Is there a way i can change the boot screen picture? It has the t-mobile design at the moment.
Hi. First of all, i'm not tiny bit as knowledgeable as the gurus on this board, but this seems to be solvable by my bird brain, so here goes.
First of all, I think you should do a hard reset and before the T-mobile customisations begin, you should soft reset to prevent T-mobile gprs and mms settings etc from getting installed.
Then you can install or configure O2 settings.
For boot screen, you need to CID unlock your device and then splash the required boot screen. There was quite a discussion in the Charmer forum about this. You might want to check the Charmer threads. Loads of information there.
Hope some of this helps. Cheers.
Just trying to help:
Vildar said:
I have recently bought a MDA Compact II of a mate of mine. It used to be on T-mobile but has been unlocked and currently has an o2 sim. I have had some problems though. I cant seem to use my o2 GPRS settings in the device, or send MMS messages. When i take a picture using the camera, then go to send in a MMS the device freezes and i can not get back to the main screen. Also, when i try to send a file through MMS using the file manager, nothing comes up.
When i go to send a new message, i click on the menu button and the Insert Item field is greyed out. Does anyone know the problems i am having and how to fix them?
Thanks in advance for any help.
PS: Not much of a problem but wonder if it can be fixed anyway. Is there a way i can change the boot screen picture? It has the t-mobile design at the moment.
Click to expand...
Click to collapse
1.- Settings: Delete all the T-Mobile connections, and create your own according to carrier of the SIM you are using. Doesn´t take much to figure out how to I wouldn´t recommend to stop the customisation where the extended ROM is deployed, you may find useful settings in your Ext ROM.
2.- Splash screen: http://forum.xda-developers.com/showthread.php?t=253308
Good luck!
I have done a soft reset before customization begins, but my o2 details do not seem to want to work when i test them. The splash screen thing looks a little complicated and i will read up on it sometime.
Now for my other problem. Does anyone know why when i click "Send to MMS" after taking a picture the device locks up and i need to soft reset to use the device again. And also why is the "insert item" field greyed out in the menu when creating a new SMS?
By the way thank you for the other advice. I will be reading up on it very soon.
moved to charmer.
since soft and hard resets have proven futile, you may want to try a rom upgrade to see if it makers any difference.
rgds
jim
Help
I have a mda compact 2 mobile and when I try to connect to gprs it says:
no modem at above number.
and to let u know I'm not using T-Mobile network , and I tried to do soft rest befor the T-mobile settings downloaded and it still the same problem
please help
thanx
thx guys ..my phone is back to life ..lot of thanx love ya

LG V40 (V409n) Service Disabled

Hi, can someone help me? After i replaced my charging port for a new one, my sim card are not detect. It's show "Service Disabled". I already made a factory reset. Nothing changed.
Now i can only use wifi only.
#sorryformybadenglish
Jasadth said:
Hi, can someone help me? After i replaced my charging port for a new one, my sim card are not detect. It's show "Service Disabled". I already made a factory reset. Nothing changed.
Now i can only use wifi only.
#sorryformybadenglish
Click to expand...
Click to collapse
Never experienced anything like that myself, but do a google search for 'lg "service disabled"' and you'll get lots of hits with solutions. Seems it's kind of a 'glitch' thing.
cheers
Jasadth said:
Hi, can someone help me? After i replaced my charging port for a new one, my sim card are not detect. It's show "Service Disabled". I already made a factory reset. Nothing changed.
Now i can only use wifi only.
#sorryformybadenglish
Click to expand...
Click to collapse
Did you find any fix for this issue? I googled and tried everything there but no fix

Phone says Caller-ID unknown Help

Hello guys,
I've ran through an issue lately, if someone calls me he is shown as "Unknown", I've everything synchronized with google, contact is in my device/google/sim, I've called my carrier and they resetted my sim card but still no luck.
Carrier told me that's its a setting in the phone but i cant seem to find it.
Anyone elss has a solution?
Regards, Jason

Categories

Resources