Database Develop

O2 XDA IIs Optus Aust - ROM Upgrade error

Hi guys, I hope you can really help me out.
I have an O2 XDA IIs which I just tried to upgrade. Now during the install it comes up saying "ERROR 114" saying that there was an error installing the upgrade.
Now my problem is the phone just sits there with Serial 2.07 on the screen .... i've tried running the upgrade program again (the screen where it says what rom you have, and what you are upgrading to, it's blank in the current rom) but I still get the same error every single time.
I'm trying to upgrade to;
CE Image version 1.40.00
Extended Image Version 1.40.923
Radio Version 1.12.00
Can someone please give me some ideas as to what I can do to get this working again?
Many thanks
Damien

sounds like the country id error, have you tried the MaUpgradeUt_noID file???
this usually fixes this. 8)

Big trouble upgrading from 1.22 to 1.4

Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.

jksour said:
Hey gus,
New to this forum. I was trying to upgrade my ba from 1.22 to 1.4 and somehow I think I got stuck in the bootloader screen. I downloaded the rom directly from clubimate. My problem is when I run the rom it gets stuck when it tries to upgrade the radio. Now my phone is totally non working, it starts once in a while but only to the bootloader screen.
Any advice would be great.
Thank you guys.
Click to expand...
Click to collapse
Try following this instead..
http://wiki.xda-developers.com/index.php?pagename=BA_1.42.00_Upgrade
Let me know how you get on..?
Cheers,

I am downloading right now. Is it easy to switch the language?
thanks

Thank you for responces, but they did not work.
OK, I downloaded the dutch 1.42 rom version. I also downloaded the country code error program. I ran it and I got the same exact thing as I did with the 1.4 rom directly from imate. The problem is: when the rom program is about to update the radio it freezes and returns an error 114 something like radio update error. I don't know what to do, and of course my phone is not usable.
Please if you have any advice tell me.
thank you

Hey guys,
I finally fixed it. I read somewhere that if you delete the radio.nbf and the ms.nbf files and then try to update it will work. So I did, and now my phone is working again.
Thank you.

Charmer crashed with the new Aku 3.3!

Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !

Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.

It doesn`t work too, it always stops at 95% has anyone another idea?

did you try hard reset?

Yes i tried hard reset, but it is always in bootloader!

I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!

nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079

Sorry but i do not speak hungarian. What do you want to tell me ?

I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???

oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???

Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!

that link is broken

Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!

Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!

Musna do you have any massage such as msn

Having problems updating radio on SX66 (Blue Angel)

Hello, I upgraded my Blue Angel (SX66) to WM6.1 last week. I wanted to upgrade the radio from 1.02 to 1.15 but I have not been able to. I keep getting Error 101 (disconnect).
The device information shows the following info about my device:
Operator version : WM6.1PPC Phone
ROM version: 6.141WWE HT4.20
ROM date: 09/18/08
Radio version: 1.02.00
Protoco; version: 1337.32
ExtROM version: Black Kernel
Model No: PH20B1
Also, the RUU mode on my device shows BlueAngel and by USB mode is v2.06. I checked the beginners' section on this site and tried every possible trick (bootloader mode, modifying the country, etc). So, far nothing has worked. I would appreciate some guidance on this matter. Thanks!

remember the folder that you use when you upgrade to the latest ROM? Copy that same older on a different location on your PC and then open it and just delete the nk.nbf file and replace it with the latest radio rom which is 1.15.00 for BA and then run the same process, make sure the activesync is not running and your BA is in bootloader mode. Hope this helps.

Still having problems updating radio on Blue Angel
Thanks for the reply. However, that is still not solving my problem. I getting ERROR 101. CONNECTION ERROR. I tried the BAupgradeut in Bootloader mode. and I get the same problem. I read about a utililty called ROMupdate11a.exe and tried it, but it is still not working.
I wish I would've realized how difficult this process is. I would've made an effort to buy a Blue Angel device w/ updated firmware.
PS: I have read the Blue Angel beginners' section and the wiki and tried (to the best of my ability) to try all the tricks listed there. This is why I hope someone out there has experienced and solved the same problems I have.
Thanks again. I will keep looking, and hoping for a solution.

have you tried MAupgrade_UTL??? Ok like this, try to revert back your BA's ROM to wm2003se first, then do the Radio upgrade and afterwards upgrade to the latest ROM

I think I know why I cannot upgrade radio
I suspect that my Blue Angel's BIOS is damaged. I used the GetDeviceData to find get exact ROM for my PH20B1 device (see attached). I used to get PH20B1 on the DeviceData.txt file. Now I get a lot of garbled characters in the section where the model # used to be. Also, when I go to Device Information (under the WM6 settings section), I see the same garbled characters where the Model No section is.
I also cannot find the Country section. This may also explain why my phone fails to recognize any ROMs (even those flagged as WWE --- from the USA). That is not good, I think.
My fear is that my device will not accept any ROM updates (or downgrades). Does the above make sense? If so, have I messed up my Blue Angel for good or is there still hope? Thanks.

Never mind, problem solved. Thanks!!!
Hello again. I just wanted to let you all know that my Blue Angel is OK (finally). A friend of mine, who also has an SX66 successfully applied the Radio 1.15 ROM upgrade (after he unlocked my device). I am all set now. Thanks for your assistance and guidance.

After browsing the forum couldn't make it work..HELP

Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.

hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.

progammer said:
Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.
Click to expand...
Click to collapse
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?

Chef_Tony said:
hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.
Click to expand...
Click to collapse
i followed your steps throughly all the time. where can i find the log?

egzthunder1 said:
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?
Click to expand...
Click to collapse
i have windows mobile 6.1 installed
i want to downgrade it to 2003SE inorder to install WM6.5.5
its original windows was 2003SE
if there is another way of returning back to the old windows then let me know else you can help me with the question that i have asked from chief

05/06/2010 10:44:07.906 **************** Logging Started ****************
05/06/2010 10:44:07.906 Process L:\A Siar\A Siar\PDA 2K\BA_WM5_Downgrade_pack\BA WM5 Downgrade pack\Downgrade to WM2003SE\MaUpgradeUt_noID.exe p(1776)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIListener::AcceptConnection : hr = 0x8007274a - rapiconnection.cpp(268)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIDesktopPrivate::ReceiveConnection : hr = 0x8007274a - RAPIDesktopPriv.cpp(372)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in ServerThread : hr = 0x8007274a - rapimgr.cpp(493)
05/06/2010 10:44:21.437 **************** Logging Stopped ****************
Click to expand...
Click to collapse
This is the log that I got from "C:\DOCUME~1\Home\LOCALS~1/Temp/WCESLog.log" file of my windows

It worked!
How?
In the wiki its said to also kill the "rapimgr" but if you kill that it will not work so only kill "wcescomm.exe" and "WCESmgr.exe".
Then I tried to upgrade it to 6.5.3 but again found the same problem, here is how to overcome that one too.
Its mentioned in the post of "Chef_Tony" to disable the USB connection but after doing so it didn't work cuz I got error from windows that "USB device couldn't be recognized" so I think because of this the rom version while upgrading didn't appear. However, again from ActiveSync I enabled the USB connection and it worked.
Thanks Chef_Tony and egzthunder1.

actually, for an upgrade from wm6.1 to wm6.5.3, a downgrade to wm2003 would not have been necessary. you'd only ever have to upgrade again, if your storage capacity is 43mb instead of 60mb. you can up- or downgrade between different cooked roms directly.
but since you made it work, it's ok, just as a time saver for next time

Thanks for the tip!

While I am glad it worked out, the solution doesn't make much sense...
meh...