Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.
hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.
progammer said:
Hi,
I am trying to downgrade my Pda2k from WM6.1 to WM2003 but after running the "MaUpgradeUt_noID.exe" I don't get the current version not even the version that I am switching to.
I removed the cradle, before doing so ended the process of "wcesscom" and "rapigmngr", and put my device on bootloader mode. The I plugged it back and "USB" appeared on the screen and below is "v2.07". Still it does not work.
I am using the correct "MaUpgradeUt_noID.exe" and also the right "nk.nbf".
I have downgraded before but I don't know why its not working now.
Click to expand...
Click to collapse
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?
Chef_Tony said:
hi and welcome to the forum. the only real problem is, that the version is not showing up on the 2nd screen of the RUU. the version that is currently on the device is not necessary.
that can have so many reasons, first you should try to follow the instructions in my tutorial word by word and if that does not help, post the log of the upgrader, maybe the CRC of the rom is not correct. that seems to happen a lot lately.
Click to expand...
Click to collapse
i followed your steps throughly all the time. where can i find the log?
egzthunder1 said:
It could be that the nbf doesn't like the RUU. Why don't you try flashing to a stock rom?
Click to expand...
Click to collapse
i have windows mobile 6.1 installed
i want to downgrade it to 2003SE inorder to install WM6.5.5
its original windows was 2003SE
if there is another way of returning back to the old windows then let me know else you can help me with the question that i have asked from chief
05/06/2010 10:44:07.906 **************** Logging Started ****************
05/06/2010 10:44:07.906 Process L:\A Siar\A Siar\PDA 2K\BA_WM5_Downgrade_pack\BA WM5 Downgrade pack\Downgrade to WM2003SE\MaUpgradeUt_noID.exe p(1776)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIListener::AcceptConnection : hr = 0x8007274a - rapiconnection.cpp(268)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in CRAPIDesktopPrivate::ReceiveConnection : hr = 0x8007274a - RAPIDesktopPriv.cpp(372)
05/06/2010 10:44:12.109 p(796) t(232) TraceToFile -> ERROR in ServerThread : hr = 0x8007274a - rapimgr.cpp(493)
05/06/2010 10:44:21.437 **************** Logging Stopped ****************
Click to expand...
Click to collapse
This is the log that I got from "C:\DOCUME~1\Home\LOCALS~1/Temp/WCESLog.log" file of my windows
It worked!
How?
In the wiki its said to also kill the "rapimgr" but if you kill that it will not work so only kill "wcescomm.exe" and "WCESmgr.exe".
Then I tried to upgrade it to 6.5.3 but again found the same problem, here is how to overcome that one too.
Its mentioned in the post of "Chef_Tony" to disable the USB connection but after doing so it didn't work cuz I got error from windows that "USB device couldn't be recognized" so I think because of this the rom version while upgrading didn't appear. However, again from ActiveSync I enabled the USB connection and it worked.
Thanks Chef_Tony and egzthunder1.
actually, for an upgrade from wm6.1 to wm6.5.3, a downgrade to wm2003 would not have been necessary. you'd only ever have to upgrade again, if your storage capacity is 43mb instead of 60mb. you can up- or downgrade between different cooked roms directly.
but since you made it work, it's ok, just as a time saver for next time
Thanks for the tip!
While I am glad it worked out, the solution doesn't make much sense...
meh...
Related
Hello,
I`m trying to get latest lvsw wm6 to the device.
I own the phone since today.
I made the following steps:
Execute ROMUpdateUltility (Hard-SPL)
->Next->Next->Update
From: Image Version 1.16.407.2
to: Image Version 1.20
->Next -> Next
On the phone:
Enterbotloader.exe
"blabla"
YES
On the computer:
ERROR[246]: Device not responding
On the phone:
IPL-SSPL by Des
SPL-1.07.ds
ok,
trying to run ROMUPdateUltility again...
next next next... he shows me the progress bar --> finished! YES!
Rebooting the phone --> same software version as before the update?
trying to update for 2 hours... just to use gps as advertised
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
messiah said:
please help, i tried the official Update from HTC -> successfull but effects! programs, contacts etc still there, same version number!
Click to expand...
Click to collapse
I've the same problem [246] upgrading unofficial roms like
GSM_1.41.00.11
and
ROM_ING_WM6_2.27
The only upgrade I make successfully is original
htcp3600-RUU_Trinity_HTC_ITA_1-23-408-2_103_6275_1-38-00-11_108
what's wrong ?
P.S.
I test it using activeSync 4.2 & 4.5
Messiah..... Have you read the very first post in the LVSW ROM thread?
I am NOT having ago, just checking, seems you may have miss-understood.
Grab ALL 3 downloads listed there.
Apply first one, and yes there IS NO real visible change to the phone apart from it has been hard SPL'd
Now apply Second one, will go through the same process BUT the Radio ROM is changed and updated
Now Apply the Third and WM6 is installed
The failure you describe is the computer dropping Activ Sync and then "seeing" the phone in Bootloader mode, which is why it take 2 bites of the first cherry, after that all "should " be ok.
I managed to get mine on the first attempt so it is "Me Proof"[TM] and "Just Works" (c)..... however report back if this hasnt helped
yeah, the process you described tells me that you've loaded hard-spl on your phone.. that's all. No WM6 yet...
I have the same problem.
I have Hard-SPL'ed my Orange M700
Then reboot and reestablish Active Sync
Then I have updated the Radio Rom
Then reboot and reestablish Active Sync
and now it's 1.41.00.11 in settings/system/device information
but when i apply
20070527_Trinity_WM6_v2.0.1.1 it uploads then i power on my device and it's still WM5 ?
What am I doing wrong??
Any help appreciated.
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
akirainblack said:
This may be a stupid question but have you SuperCID your device before running the updates?
If you go:
Start -> Settings
System
Device Information
What does it say under Radio version? (Just checks the second step has been completed successfully).
Also when you enter the bootloader what does it say on the screen?
Click to expand...
Click to collapse
I thought you didn't need to SuperCID the device (http://forum.xda-developers.com/showpost.php?p=1245390&postcount=70)
My radio Rom shows 1.41.00.11
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
While doing the SuperCID upgrade i was wondering: After flashing any of the ROMs do I reboot or power On manually or wait for the device to reboot itself as the message in the SupoerCID tool suggests:
If radio upgrade went fine, wait until your phone reboots and make sure
ActiveSync is enabled again (you should see green icon in system tray)
Click to expand...
Click to collapse
Stupid Q: How can i make the boot screen stay long enough so i can write it down?
My ActiveSync is 4.5 on WinXP
Rummage around in Start--> Setting --> device ID, and version and stuff...... they are there and you get the same info as on the boot screen... and it stay on longer ;-)
Sorry if a little vague but away from phone at the moment......... erkkkkkkkk
/me runs off to find it so this may get edited
akirainblack said:
TBH I don't know. But it can't hurt to try it, I SuperCID mine and it flashes perfectly each and every time.
I'm merely trying to make suggestions that may get a result.
Oh, you didn't tell me what the bootscreen said and what version of Activesync do you have on your PC?
Click to expand...
Click to collapse
I didnt Super CID just followed the instructions in LVSW 's first thread, applied each DL in order and "it just works" (c)
Thanks. That's where i got the infroramtion from b4. I just thought it might be different in the boot screen.
I now did the SuperCID unlocking and did the 3 upgrades again. after the 3rd upgrade i still have:
- WM5.1.342 Build 15096.3.0.0
- ROM 1.23.61.5
- Radio 1.41.00.11
Q again: Do I need to wait after the flashing or do i immidiately press power
(that's what i do when it says finish) or do i soft reset? Or what else?
Thanks for your help.
Hmmmmm just got me phone....... dont ask
Right CE OS 5.2.1413 build 17745.0.2.3
ROM 2.0.1.1
Radio 1.41.00.11
Sooooo.......
a) are you using LVSW (just to be sure)
b) have you grabbed the latest version posted on page 1 of the upgrading thread?
c) I let it restart it self after it finished flashing, it then reclibrates the screen etc etc
Also looks like you havent upgraded anything just yet ... follow the instructions to the letter and it "should" be fine
a) yes
b) yes
c) there might be the problem i waited 2 mins ans as it wasn't rebooting i just used the power button. How long should i wait aftr the WM6 install?
I soft reset mine directly after the screen goes black. So that should be fine.
Maybe it has to do with my boot loader:
When i go to bootloader i see:
IPL-0.50
SPL-1.07.0000
then it starts fading quickly. is this normal? I have the same fading effect when i install ste 2 the radio ROM. but i still have the new radio rom on as it displays as 1.41.00.11
I again tried to use the 2.0.1.1 it uploads very quickly (maybe 2min) and then it's still the "orange" screen and WM5 on reboot and i still have all my data.
What a I doing wrong?
No. Mine stays there right up until the upload to the phone starts.
Then I get a grey background with a blue progress bar.
What happens if you run Enterbootloader on the phone. Then connect it to the PC.
Then run the install program on the PC.
The first process didn't work.
You should have:
TRIN100
IPL-SSPL by Des
TRIN100
SPL-1.07.ds
Hmmmmm if all else fails try a hard reset on your phone and see what versions of what you have after that.
Did you use ANY form of unlocking prior to using LVSW rom?
/me suspects this might be casuing issues
The radio rom zoooooomed up to my phone and likewise the WM6
I cannt remember reseting the phone after flashing.... IIRC it just worked as in it finished then re-started and way hey off it went.
Also FWIW I just used the DL's in the thread without bothering with anyother boot loaders etc... ie extract flies in first DL into 1 folders, run them, ditto DL's 2 and 3.
OK, so, here it is.
Download, extract, Donate!
your device *MUST MUST MUST* be synced with ACTIVESYNC and in WINDOWS MOBILE before starting the procedure.
All of you kind folks who pledged to the fund... please feel free to use my donate link </shameless_whore>
Cheers!
Olipro.
Hey Olipro
Nice to see this is up and running.
One Question....does it need to be in XP or can it be done in Vista as well?
try Vista and report back.
Vista worked for me
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Just the start?
ajajaj said:
Vista worked for me
goes through alright (once drives are fixed up) however flashing any other rom still fails - even when manually going into the hard spl, and then running flash utility, it says the rom is corrupt.
Click to expand...
Click to collapse
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
ajajaj said:
I guess that this means we need to now roll our own, or wait for someone to release a p3600i rom which uses this spl?
Click to expand...
Click to collapse
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Radio Upgrade successfull
Andyc46 said:
Did you try flashing a new radio ROM as well. Previously we could not flash anything other than the HTC Official ROMs including radios.
Click to expand...
Click to collapse
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
I have an nbh from an existing rom, I want to change the 400 to 401 as referred to in other thread - can anyone offer context (where do i find the 400 specifically referred to?)
if I search, is it hex I am searching for, or ascii?
TIA
ajajaj said:
I just upgraded my Australian P3600i to Radio 1.50.08.11 successfully! WOOT!
Now all I need is a workable p3600i WM6.1 rom.....
Click to expand...
Click to collapse
Well that is a good start.....which ROM did you try that came back as corrupt?
Andyc46 said:
Well that is a good start.....which ROM did you try that came back as corrupt?
Click to expand...
Click to collapse
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
experiments in flashing
I modified the first instance i could find of 0x0400 the RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite rom to 0x0401 and got a different error message saying:
Error [226] : FLASH WRITE
Flash write error happened. please check your PDA phone.
now the phone is now stuck in SPL
changed it back, and re-flashed, flash failed with "type error (128 vs 256)" however the phone now boots again.
tonychou said:
等待中国高手的简体ROM
waiting 4 the writer 's CHS ROM
Click to expand...
Click to collapse
No good to me...I am after WWE
ajajaj said:
I have tried the Trinity_WM6.1.Black_Edition.OS_Version_CE_5.2.19701_Build_19701.1.0.2_by_Akeo rom - this reports as corrupt.
Also, RUU_TRINITY_WM6.1_WWE_ASIA_3.12.YK.Lite - this one complains that the rom is for 128, not 256 MB.
Click to expand...
Click to collapse
That seems strange as the basic ROM for D810 (Standard Trinity) is the same for P3600i.....you would think both phones should accept cooked ROMs (now we have Hard SPL).
sigh. problem is that none of the roms I try will load...
By changing first 0x0400 in mary nbh to 0x0401, it flashes as far as 11% and fails with communication error, then when booting changes the inital start screen of the phone, (flashed to phone) but no further. saying the rom is corrupt.
SUCCESS
fully flashed the P3600i to WM6.1 - writing new thread to show how.
I had tried a few times one 2 mechine
one on winxp and one on win2k3
but both mechine show the same error when i do the step 1
the phone go to 3 color but in pc side it shows the ERROR [260] message
don't know how to do ><
after reset the phone
nothing happened
What happened to me exactly the same as you!
money donated!
Thanks both olipro & ajajaj!
ok so i tried to do hard-spl. but i got a 260 error.. reset my phone, windows came back up.
this was from a xp sp2 machine :/
the crap thing is now i cant run any cab files on the wm device.. i've definately done something to do.
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
cazlol said:
Hi,
Although this is my first post, I have been lurking for many years.
I have successfully flashed a Kaiser and a Diamond in the past so I feel reasonably confident.
However, I am having real problems with my blackstone. I have followed the instructions until point 5, when I enter bootloader it is showing 1.14000 etc - I then try to follow the rest of the instructions. It will go into the rom updater utility, the screen will go grey and show 0% but then nothing happens and I eventually have to go into recovery.
Any ideas?
Thanks
Caroline
Click to expand...
Click to collapse
Sounds like you haven't installed either HSPL or USPL before trying to flash rom.
I'd recommend going down the HSPL route. (Latest HSPL can be found in my signature). Once downloaded flash to phone then you are ready to flash to cooked roms
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
cazlol said:
Hi,
Thanks for replying. I just tried that and have the same problem.
What have I done wrong??
Caroline
Click to expand...
Click to collapse
Go into bootloader. If it says 1.14.0000 you are ready to go to step (5c). When you connect usb cable to pc does the text at bottom change from 'serial' to 'USB'?
Possible problems could be:
1. You haven't disabled anti-virus
2. Drivers on you pc need updated. Download step (1g) and go to (0).
If USPL is successful it should state SPL v 1.15.USPL in bootloader. If HSPL is successful it should state SPL v 1.15 OliNex
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
cazlol said:
Hi,
Well after much swearing at both computer and phone, I managed to get the drivers updated. Many thanks Spartan, it seems that this was the problem as I am flashing Dutty's ROM right now.
Thanks for your help.
Caroline
Click to expand...
Click to collapse
No prob's, just glad you got it sorted
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Near enough the exact same situation as me! I think that 1.15 file may have issues.
wayneroughneckz said:
I've been lurking with the XDA forum for quite sometime now and its my very first posting and I'm having difficulties finding answers on search box I just simply give up looking for appropriate answer to my question. Since I like to use the good old Winmo 6.1 rom (Davideuck_V-7_MSVC to be exact)my bad is I forgot to SPL to earlier version 1.15 so got a green kinda thing on my screen, so I apply Restore_Stock_SPL_115 and everything went fine. (I know I'm stupid ) Unfortunately after I update the Time and Date it suddenly appear " This concludes the beta test for this software release....... blah, blah,.... guess what? its a time bomb can't do anything on screen but to reset. So I decide to re-flash it again but I got stuck at 0% on bootloader mode and got Error 262, I tried to understand whats the meaning of it and I did, but never got any solution how? I tried to flash it with HSPLWrapper_Blackstone_156OliNex to restore Winmo 6.5 but I got stuck again on 0%. something unusual I tried to reflash more roms and it didn't work. All the Roms I've wont reach 1% Even flashing on SD card trick wont load. And my spl ver 1.15 can't flash anything. So I that's why I need your help desperately...
Click to expand...
Click to collapse
If you are getting an Error 262, you need to run manual sspl in order to resolve this. Read this post for the steps (post #2) and sspl tool (post #1) - http://forum.xda-developers.com/showthread.php?t=505377. You can also get all of the steps needed to successfully flash. if you have questions, please post them in that thread.
It seems when I restart my phone normally, I noticed that the message about " This concludes the beta test for this software release....... blah, blah" the manila interface was behind it when I press the task manager and the volume buttons it responses means its not bricked (hope so) maybe the reason why I cant flash anything? Or whatever...Well that's my observation..... Please guys I needed my phone badly tomorrow
Did you not read my post . You can flash another rom, error 262 is common. You just need to use sspl before flashing to hspl 1.56.
if ur stuck with hspl and cant flash that than try uspl or try stock rom.... they get installed without hspl or uspl installed.... its available in the blackstone wiki section
and with stock rom get through tomorrow . than try hspl or uspl with custom rom later on when u have free time
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Apologies on replying again here instead of posting on the designated thread , but forgive my innocence the thread says "" launch SSPL-Manual.exe from attachment, run it, wait until 1.07.OliNex tricolour screen says "USB" on it, then run the HardSPLWrapper_Blackstone.exe on the PC. "" how exactly that's going to be done? Currently I got the tri-color screen saying SPL-1.15.0000 and a USB on the bottom and when I flash either hspl or uspl I always end up on gray screen with a 0% that doesn't move at all, how can I manually apply SSPL? I cant access Manila interface because of time bomb message? My life's getting complicated!
If possible try flashing from an XP box, Vista/7 might give you some additional trouble if you don't use the right drivers. But if you get to the 0% screen, the issue shouldn't be with the SPL... so don't worry, I doubt the phone is bricked
So: try XP and/or using the drivers provided in the Flashing-thread
zerozed said:
Upgrade the ROM with latest official HTC release it upgrades the bootloader to ver 1.54 as well. Then you can install the newest version of HSPL or just use USPL to flash whatever cooked ROM you want.
Click to expand...
Click to collapse
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
wayneroughneckz said:
I tried the Official one Blackstone_WWE_1.56.405.1 and got Error[294] Invalid Vendor ID
Click to expand...
Click to collapse
Did you downloaded the ROM from the HTC site? If the ROM is from the official site try again using USPL.
I seach the wiki page and found the latest version which is "Blackstone_WWE_1.56.405.1" and I can't find it on the official site, it should be "WWE" not specifying on certain countries, so I manage to download it from Rapidshare link. and for the SSPL I don't think I can do that coz I can't access my phone coz it has tim bomb probably the main culprit here.
Any flashing problems should be posted in Dummies Guide thread.
Thread closed
Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance
can some1 please help on this?
ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?
IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?
prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
so how do i marked this thread as solved????
OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.
IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......