have a problem with mine qtek9090 I have inserted the rom of the wm5 and he does not work well as I can get back back help thank
well ..
go to bootloader ... and just install the old Rom !!
this should solve it .
Related
hello guys
how are u, i hope u all are doing fine
actully it's my first topic here and i need ur help and i am sure that u r gonna help me
my proplem is i tried to upgrade my i mate pda2k but mistakly i used the i mate pocket pc 2003 rom
and everything is gone
my i mate dosn't work now the only thing that i see on my screen is
serial v2.06
so pleaaaaaaaaaaase tell me what to do
and i am really apreaciate it
You should be able to remove it from the cradle,remove the battery,replace the battery ,put it back in the cradle,and run the proper rom.The upgrade should load up fine.If not,then you will probably need to put it in the bootloader mode and run the upgrade.
Hi ,
I have just upgraded my ROM to CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US on my QTEK9100 . The upgrade went perfectly fine for 10 min and it even copied all the cab files . But after the hard reset , my radio does not seem to work and the battery indicator displays status as unknown. When I click on start , it take long time to pop-up . Not sure what could be problem. I upgraded the ROM with CID-Unlocker option as NO . Also the active sync does not seem to work anymore now if I want to roll bak to the original ROM. Can I get some help to get my QTEK back in workig state somehow pl ? Any help is highly appreciated. Pl. let me know in detailed steps to get this thing up and running . I am using T-Mobile SIM with a plan and i am in UK.
Thanks a lot.
Superlifer
Not able to use my QTEK9100
Hi Guys,
Now my unit keeps on rebooting on itself with T-Mobile startup screen. I tried holding the camera and the recoder button while resetting, but doesn't seem to work. I am worried that my gadget might be completely unusable. Can anybody assit please asap ?
Thanks once again ..
Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens
please read wiki..
regards
faria
I'm afraid this aint the same deal, it doesn't really matter what I try . . .
Reset button, power and reset / power record and reset
or removing the battery, doesn't matter. when I put the battery back in it will just say USB v2.08.
Hope someone will know what to do . . .
Thanks before hand, Jonathan Lourens . . .
SmokeyMc.Pot said:
Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens
Click to expand...
Click to collapse
use Mitty, when stuck on bootscreen
Many Many Thanks, worked like a charm . . .
hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...
i am trying to update my rom. but all gone good. but after completing device restart and i always found old rom there. any bidy plz help me