Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens
please read wiki..
regards
faria
I'm afraid this aint the same deal, it doesn't really matter what I try . . .
Reset button, power and reset / power record and reset
or removing the battery, doesn't matter. when I put the battery back in it will just say USB v2.08.
Hope someone will know what to do . . .
Thanks before hand, Jonathan Lourens . . .
SmokeyMc.Pot said:
Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens
Click to expand...
Click to collapse
use Mitty, when stuck on bootscreen
Many Many Thanks, worked like a charm . . .
Related
have a problem with mine qtek9090 I have inserted the rom of the wm5 and he does not work well as I can get back back help thank
well ..
go to bootloader ... and just install the old Rom !!
this should solve it .
hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...
please help me
I can not synch my tytn2 kaiser to my pc ...I when connect the ppc to pc by the cable ...the pc ask me to install drivers ....& I have no drivers!!!!
I have no problems to synch by blue tooth....
help me please .....
drivers are in C:\Program Files\Microsoft ActiveSync\Drivers
same problem
thank you for your reply ....
but there is no file called 'microsoft active sync.' in program files...
my pc was formated befor 2 week ago. ....but problems was existed there befor formating . ....
I realy complaining of this problem ....
help me please. . ....
if you are using vista, the drivers are here
C:\Windows\WindowsMobile\Drivers
I found 4 folders :blue tooth ,RNDIS,serials,WPD.
& a lot of subfolders inside these folders ....& I can not known which one is the drivers for the kaiser. . ....
thank you for assistance . . ...
still same
I install the drivers but still recognized as unknown device . . ...
any body can help me . . ...
try a new usb cable.
nothing ok
I tried everything ...nothing ok.
I formated my pc & ppc . ....nothing ok.
anyone has any idea to help me. . ...!?????
Well I just used the CDROM that came in the box with my TyTN II before even thinking about connecting the phone so if you've tried all this then the USB ports on the PC must be faulty, unable to cope with advanced networking functionality, or disabled.
realy I lost the CD you are talking about it . . ... !!
but without using this CD ,there was no problems of cable connection until I upgraded the ROM "nothrill" . . ...then after that I can not do any cable connection . . ...????
I would like to ask if I can upgrade the ROM another time by blue tooth sync . . .????
Problems with custom ROMs should be posted in the custom ROM thread where found!
dr3aayasreh said:
realy I lost the CD you are talking about it . . ... !!
Click to expand...
Click to collapse
Really Of course you can get Activesync/WMDC from Microsofts website (read the xda wiki if this means nothing to you), but the Kaiser customisations only come with the HTC CDROM.
but without using this CD ,there was no problems of cable connection until I upgraded the ROM "nothrill" . . ...then after that I can not do any cable connection . . ...????
Click to expand...
Click to collapse
The plot thickens . In accordance with forum rules then, you should post in the forum related to that "nothrill" ROM that you've installed. This problem doesn't occur with my correctly installed HTC official ROM.
I would like to ask if I can upgrade the ROM another time by blue tooth sync . . .????
Click to expand...
Click to collapse
No but even if it was possible, would it be wise to try yet another ROM given whats happened with this one? Aren't you more interested in putting it back how it was and reverting, rather than 'upgrading' again? This gives a new definition to the term 'upgrading'.... Time for you to do some wiki reading to see what options are avail.
HI ,
My XDA doesnt go through the initial screen ,
comes up with o2
r 1.17.00
g 1337.28
d 6.00
tatz it : i tried flashing win 6.5 but tiz is wat i ended up .
Cant establish active sync connection so that i can update some other rom.
please help me i can afford to take it stores .
please help me , wat can be done .
important info : this mobile is locked to 02 , if any unlocking software plz let me know , i need windows mobile 6.5 on my mobile
hi
have you read how to upgrade rom for noob?
just read it, and if you're still can't connect with the activesync, i think your usb pin was broken or something..
just search and read and do it.
regards
insert the stylus in the hole...press n hold D'PAD n press power button u'll b in boot mode..
now put ur phone in the cradle...try reflashing...
thx
its up nd running fi9
Cool
We all are very proud. Good man - you got the job done!
hi all .i am not a phone expert, but i flashed my phone several time's with topat , cheetah en more . but now my phone is realy slow , with everything. if i type a message it wil crash , if i want to see a picture it crashes. is there a program wherewithal i can format my whole phone ? and which kitchen can i use for the topat 2.1 rom . i am from holland . dutch plaese. thanks all
jeetje103 said:
hi all .i am not a phone expert, but i flashed my phone several time's with topat , cheetah en more . but now my phone is realy slow , with everything. if i type a message it wil crash , if i want to see a picture it crashes. is there a program wherewithal i can format my whole phone ? and which kitchen can i use for the topat 2.1 rom . i am from holland . dutch plaese. thanks all
Click to expand...
Click to collapse
Do you hard reset after you flash?
You may want to consider MTTY Task 29 before flashing. Info can be found here.
no i didn't . i have done a hard reset . thanks it workd fine .thanks again