Database Develop

Help with PDA2K

hello guys
how are u, i hope u all are doing fine
actully it's my first topic here and i need ur help and i am sure that u r gonna help me
my proplem is i tried to upgrade my i mate pda2k but mistakly i used the i mate pocket pc 2003 rom
and everything is gone
my i mate dosn't work now the only thing that i see on my screen is
serial v2.06
so pleaaaaaaaaaaase tell me what to do
and i am really apreaciate it

You should be able to remove it from the cradle,remove the battery,replace the battery ,put it back in the cradle,and run the proper rom.The upgrade should load up fine.If not,then you will probably need to put it in the bootloader mode and run the upgrade.

Only Boot loader . . ??? PLEASE HELP . . . ! ! !

Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens

please read wiki..
regards
faria

I'm afraid this aint the same deal, it doesn't really matter what I try . . .
Reset button, power and reset / power record and reset
or removing the battery, doesn't matter. when I put the battery back in it will just say USB v2.08.
Hope someone will know what to do . . .
Thanks before hand, Jonathan Lourens . . .

SmokeyMc.Pot said:
Hi All,
I've got a nasty problem, I was trying to upgrade my BA to WM5 Helmi's new rom. I was getting error 101 ( connection problem ) I quess that's because I'm using Vista and there new Mobile Device Centre. But that aside.
I wanted to reboot my BA to check is the connection was going OK, but now my BA won't reset to normal mode . . .
I just see USB/Serial on the screen ( depending if it's in the cradle )
Does anyone know what to do, before I smash this thing in to 1000000 pieces . . .
Please help, kind regards, Jonathan Lourens
Click to expand...
Click to collapse
use Mitty, when stuck on bootscreen

Many Many Thanks, worked like a charm . . .

Ph10a Wont Boot Up.need Help Urgent Thanx

i got a XDA 2 I otherwise known as ,PH10A its not turning on so i cant install rom on phone.taken cmos battery out stil no joy,,please can anyone help me out i put it in the crradle and it does charge up.and on the screen it says USB V 1.02 and thats all and wont do nothing else ..pc wont reconise the phone..i badly need help anyone got any ideas ..

The bootloader message USB V 1.02 does mean that it is in healthy bootloader mode and that it does find a healthy USB connection as well. Activesync will not be able to communicate with it the way it would do if Windows Mobile would have been loaded on your XDA. But the normal ROM flash utilities should be able to access it. Be sure to use ActiveSync version 4.5 to flash WM6, be sure to use a PC running Windows XP, not Vista, be sure to read flashing instructions very carefully, print them and keep them handy during the flashing process. Flashing can take over 30 minutes, be patient!
success
Maggy

HI MAGGY
hey there thanx for your responce and advice how do i get the normal ROM flash utilities would u beable to give me some links to download them please i would really appreciate it and u would be a great help.i will make u a nice coffee....if i can accomplish this problem and get the phone started ...

HI MAGGY
Hi Maggie. Phone Is In The Cradle I Got Active Sync 4.5 And Running It On Xp.it Dosnt Detect The Phone At All.on The Phones Screeen Its Says Usb V1.02 As Iv Mentioned Befor.cant Seem To Flash The Phone ..but It Does Charge Up In The Cradle.but Nothing Else Can U Suggest Anything Else ....thanx

Download any of the ROMs from any of the ROM announcement threads in this board, like http://forum.xda-developers.com/showthread.php?t=328633
or
http://forum.xda-developers.com/showthread.php?t=332945
They come with the HimaUpgradeNoID utility to flash the ROM, it's built into the Tofclock .exe

HI MAGGY
just wanted to say thank u for those links it booted up my phone perfectly and cured the problems.now its got windows mobile 6 installed thank u so much [email protected]

Glad that I've been able to help you.
Cheers
Maggy

THANX
thanx Allot Once Again Been Testing Phone And Its Fine Now..cheers:d

All jade questions & answers & some links

BEFORE U PUT UR QUESTIONS HERE LOOK AT POST #2 I HAVE GIVEN SOME USEFUL LINKS CHEK IF UR ANSWERS ARE THEIR GOOD LUCK
Hi all
i have seen that many people are opening thread just to get answers for their specific problem they have!!!(no offense to anyone in particular) and i would like to inform to u that even though this forum is free
some one is paying for all the space we are using (space as in hdd space storage space etc...)
so lets not was threads to jut get an answer to our specific question
my humble request is before u open a thread ask ur self
1.can i get an answer to this by posting it in another thread related to this 2.is this thread useful to the others
more often than not your answer to the 2nd question is NO
I request all jade users put any questions u have regarding jade ie which cant be answered in a specific thread here so what does this do this saves space to create more useful threads for us all to use & also remember this could also become as a repository for all questions and answers on jade that the future jade users have and want answers for
And yes if u start putting ur questions here you would start getting answers cause their are many many helpful members out their who like and enjoy helping others and once they start seeing this section they would keep coming just here to help us out

some useful links for NOOBS
hi
some useful links for those who dont wana look around
1. Jade HSPL - this tool helps u to Flash any cooked ROMs
read this : http://forum.xda-developers.com/showthread.php?t=483465
read this also for jade 110 : http://forum.xda-developers.com/showpost.php?p=4060869&postcount=45
2.Rom Link Base - has most of the Orignal HTC Roms
see here : http://forum.xda-developers.com/showthread.php?t=483681
3. Custome RUU - u need this to flash roms on to ur phone
read this : http://forum.xda-developers.com/showthread.php?t=441865
4.Jade Flashing for NOOBS
read this : http://forum.xda-developers.com/showthread.php?t=514406
5. some useful applications for Jade
see here : http://forum.xda-developers.com/showthread.php?t=476493
6. SIM UN LOCKER FOR JADE : BY OLIPRO
link : http://forum.xda-developers.com/showthread.php?t=555354
7. A FEW COOKED ROMS
A. Tommy34 cooked ROM
link 1 : http://forum.xda-developers.com/showthread.php?t=524577
Link 2 : http://forum.xda-developers.com/showthread.php?t=505267
Link 3 : http://forum.xda-developers.com/showthread.php?t=525725
Link 4 :http://forum.xda-developers.com/showthread.php?t=550553 - His most recent Megade ROMS
B. Ironeagle Lean Cut Roms
Link 1 : http://forum.xda-developers.com/showthread.php?t=524102
Link 2 : http://forum.xda-developers.com/showthread.php?t=510201
C. SpaceJam Roms : Italian & English
Link : http://forum.xda-developers.com/showthread.php?t=554874
D. SELKKMAN ROMS-German & English
Link : http://forum.xda-developers.com/showthread.php?t=576641
E.kaew1995 WWE ROM
Link : http://forum.xda-developers.com/showthread.php?t=577350
8.HOW TO CHEK UR SPL NO
HI IF U WANT TO CHEK UR SPL NO WHICH IS SHOWN IN THE TRICOLOR DO THE BELOW
1POWER OFF UR PHONE
2.HOLD DOWN THE VOLUME DOWN BUTTON
3.WHILE STILL HOLDING THE ABOVE POWER ON UR PHONE
4. U WILL GET A TRICOLOR SCREE WITH UR SPL NO
5.TO RE BOOT IN REGULAR MANNER USE UR STYLUS AND SOFT RESET UR PHONE
9. HOW TO HARDRESET THE JADE(HTC TOUCH 3G)THIS IS HOW I DO IT AND IT WORKS
1.Power off the Phone
2.Press volume down button and also Press down the black center button
3. while continuing do the above Power on the phone
4. Now u will get a while screen asking u to press the volume up button
to do the hard rest press the same its done
Note : when u do Hard rest u will lose all your data so kindly take backup before doing the above
10.HOW TO FLASH ROM ON JADE FROM THE SD CARD (THANKS kurtfhouse FOR THIS INFO)
1. Rename the .nbh file of your rom of choice to JADEIMG.nbh, drop into the root of your SD card.
2.Poweroff your phone
3.hold the volume down key and while continuing to hold it power on ur phone
4. The Phone will go into the bootloader mode, and will auto detect the rom image from the SD Card and ask if you want to proceed by hitting the power button. Hit the power button and the rom will install
Note : it should take about 10-15 mins (as of now i have not tried this try at ur own risk but it works for kurtfhouse )
also make sure that ur SD card is Fat32 or format the same to Fat32 & use a smaller memory card the smaller the better
this is as per my experience using the above method on my previous phone ie gene(P3400i)
Original link go here if u want feedback on the same : http://forum.xda-developers.com/showthread.php?t=575045

1) 2.32.olinex
after flashing the above mentioned spl i cant flash back to the old 1.40
2) Now after flashing to it 2.32 i cant flash to anyROM too
Help!!! it just sits in 0% after the tri boot(red blue green)

@markchan
hi
have u done ur HSPL or have u just flashed a original ROM
im sure if u have done ur HSPL u can Flash any ROM u want
and in the same their is also a SPL back in zip form given instrution for the same given in the same thread
chek on the below link and kindly give more details while asking a quetion this will help in giving u a solution
good luck
http://forum.xda-developers.com/showthread.php?t=483465
markchan said:
1) 2.32.olinex
after flashing the above mentioned spl i cant flash back to the old 1.40
2) Now after flashing to it 2.32 i cant flash to anyROM too
Help!!! it just sits in 0% after the tri boot(red blue green)
Click to expand...
Click to collapse

Ok here is my problem.
I flashed my hard spl. now why tri colour shows this information
Jade100 64m
SPL-2.32.000
MicroP-Jade (LED) v5
Problem one is when i try to flash back to 1.40
the progress stuck at 0%
Then I ignore it tried to flash to a two new ROM
1.IoJade65-0.8_WWE.rar
2.Jade_LeanCut_Ultrafast_wm65_CE_OS.5.2.21815_OEM_2.33.721.1_Manila2d
the progress stuck at 0% too
T_T help me please am in almost in a panicky mode now.

do HSPL again @markchan
hi
ur spl should show 2.32.olinix
i dont know how ur spl is showins as u mentioned
i sugest pls do the HSPL again or chek ur spl again may be u have read it wrong see my sign i have mentioned my spl this should be urs after hspl
do this
power off the phone
press volume down button and then power on the phone u will get tricolor with spl chek the details if the spl is as u say and not 2.32.olinex then u have not done HSPL do it and u can flash any ROM i have done it and i have flashed more than a dozen Roms
note : while doing hspl u need live net connection and turn off ur firewall and antivirus while doing it
good luck
markchan said:
Ok here is my problem.
I flashed my hard spl. now why tri colour shows this information
Jade100 64m
SPL-2.32.000
MicroP-Jade (LED) v5
Problem one is when i try to flash back to 1.40
the progress stuck at 0%
Then I ignore it tried to flash to a two new ROM
1.IoJade65-0.8_WWE.rar
2.Jade_LeanCut_Ultrafast_wm65_CE_OS.5.2.21815_OEM_2.33.721.1_Manila2d
the progress stuck at 0% too
T_T help me please am in almost in a panicky mode now.
Click to expand...
Click to collapse

i think maybe because of the internet connection will need to try at home
currently i am in my office where proxy is being use here.
Thanks bro will update this post tonight.

yes try at ur home
hi
yes i sugest that u try at ur home and the process does give a problem when
ur at Proxy dont worry its very easy u will suceed i did it the first time and im new jade user too mine is less than a month old
goodluck and do post ur success here when its done
REMEBER : turn off ur firewall and virus when u do the process OK
markchan said:
i think maybe because of the internet connection will need to try at home
currently i am in my office where proxy is being use here.
Thanks bro will update this post tonight.
Click to expand...
Click to collapse

Yes it is confirmed! that you need the internet connection in order to complete it.
Guess proxy is not working for the SPL.
Thanks bro.
But as to date which ROM is the best i tested IOD and lean cut both of them not working properly (for 6.5)

u can try this one
hi
i have Provided a Pdaviet ROM i like it and u can also see that many who have use it also like it this is ony provided by me OK
markchan said:
Yes it is confirmed! that you need the internet connection in order to complete it.
Guess proxy is not working for the SPL.
Thanks bro.
But as to date which ROM is the best i tested IOD and lean cut both of them not working properly (for 6.5)
Click to expand...
Click to collapse

Hi Hari.
I have been going through all the threads and i recently upgraded to the new ROM for my 3G. (Official one). Actually, I use Jabra bluetooth headset with my phone. When the voice command is running in the background, the phone does not go into power saving mode. i.e. the screen does not switch off.. Can you please check the same with your ROM. Not sure if its ROM issue or something else.
If the voice command is running in the background, the phone screen does not go into sleep mode.
Any help would be appreciated.
Cheers!!
Saurabh

hi
yar i dont seem to have an aswer to this problem as i have not used any blue tooth with my phone but in the setting if u unckek the auto setting for the screen u can set it as per your req try doing the same
hope it solves ur problem
if any one else has a solution kindly advise
saurabhsrivastava said:
Hi Hari.
I have been going through all the threads and i recently upgraded to the new ROM for my 3G. (Official one). Actually, I use Jabra bluetooth headset with my phone. When the voice command is running in the background, the phone does not go into power saving mode. i.e. the screen does not switch off.. Can you please check the same with your ROM. Not sure if its ROM issue or something else.
If the voice command is running in the background, the phone screen does not go into sleep mode.
Any help would be appreciated.
Cheers!!
Saurabh
Click to expand...
Click to collapse

TFL3D for Jade
Hi guys,
Is it possible ot have TFL3D for Jade/touch 3G? If yes, then can anyone direct me to the post/thread.
I am running the latest official version of 3G ROM
Thanks
Saurabh

@saurabhsrivastava NO
hi
No this not posible im not sure but i think TFL3d is harware related
dont know the exact tech reason but do know that it is not posible
saurabhsrivastava said:
Hi guys,
Is it possible ot have TFL3D for Jade/touch 3G? If yes, then can anyone direct me to the post/thread.
I am running the latest official version of 3G ROM
Thanks
Saurabh
Click to expand...
Click to collapse

Thanks a lot Haree

Hi Haree...
Since This hTC Jade Has No Secondary Camera, Any Other Way for Me To Make Videocall ?... (Webcam As External Device Maybe....)
Thanks

Sorry For Double Posting

Well my Jade has two problems right now, since I've updated his ROM, I think.
1. When it's charging (standby mode) it only charges to 50-60% and the light is always orange. But after a soft reset it appears immediatly 100% and the light turns to green.
2. While it's in standby mode it doesn't vibrate when receives a SMS, only blinks the green light.
So... Problems with standby mode?

@blackaos
hi
if u have updated the Pdaviet ROM the SMS will only blink by default u need to got to sound setting and change the same as per ur requirement
in terms of ur charging problem im sorry i dont have a solution
u can try a hard reset
if any one has any solutions kindly advise
blackaos said:
Well my Jade has two problems right now, since I've updated his ROM, I think.
1. When it's charging (standby mode) it only charges to 50-60% and the light is always orange. But after a soft reset it appears immediatly 100% and the light turns to green.
2. While it's in standby mode it doesn't vibrate when receives a SMS, only blinks the green light.
So... Problems with standby mode?
Click to expand...
Click to collapse

@Robxl Rose
hi
yes this is a problem we have to live with that the jade has only one camera so doing video chat is gona be difficult i relay dont have a solution but their is a mini USB to 3.5 adapter available may be u can try the same and see if u can connect to a external USB webcam this is just my suggestion thats all i dont know if this will work
Robxl Rose said:
Hi Haree...
Since This hTC Jade Has No Secondary Camera, Any Other Way for Me To Make Videocall ?... (Webcam As External Device Maybe....)
Thanks
Click to expand...
Click to collapse

how to turn back into original Xperia

guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T

Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1

Same issue
[email protected] said:
Try to flash another official ROM, i.e. a previous version (R2AA, R1AA) or just connect to SEUS and let it flash your X1
Click to expand...
Click to collapse
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim

knuckle89 said:
guys ...
few month ago i had instaled HTC ROM ... and it's working on my X1i ...
but i think it little bit slowly ...
then now i want to restore it into my original X1i rom ... i had download it from rapidshare ... i format my micro sd card ... then copy it on it ...
then i flash it ...
but i can't boot it ... just stop in SE logo ...
anyone can help me to turn my X1i back ...
please ...
T.T
Click to expand...
Click to collapse
I'll try to help :
1. Unpack the file you've downloaded.
2. Rename the file (without quote) to "kovsimg.image" or "kovsimg.nbh" and make sure it's not "kovsimg.image.image" nor "kovsimg.nbh.image"
3. Copy the file to your micro SD card.
4. Turn off your device and release the battery for few seconds then turn it on again, bring i to boot-loader mode by by holding the "volume down" button on the right, and holding the power on button until you see the tri-color screen. Just follow the onscreen instruction. I believed you have known this method, otherwise you can read this.
5. If you don't have a plan to flash custom ROM again, restore to stock SPL. Find it and read the instruction here.
Just do search my friend, you'll find the answer.....

masimk said:
i have same isue
after installing windows 6.5 i cannot use TOMTOM in my fone always hang and neeed to remove battery and plug it back again
and on right top task bar icon is not appearing and due to this i cannot close or end any application
want to roll back to original ROm and i didnt figure out on net
if possible can you email me the link on masimk3 at h o t m ai l. c o m
Thanks
Asim
Click to expand...
Click to collapse
It is not the same issue. You have a compatibility software issue, that is normal since you are running a beta ROM or a software that was not designed to run on WM6.5. Knukle89 has a ROM issue, i.e. his phone doesn'e even turn on.
Follow bulux instruction or/and read this thread http://forum.xda-developers.com/showthread.php?t=431218

still can't work ...
i had run SEUS ...
but when identifying phone it always says that " the phone can't identified ... please reconect the USB "
i try it again n again but still no use ...

hard reset maybe?