Database Develop

Microsoft Voice Command 1.6 and AKU 3.2 ROMs - compatibile? Yes! Including bluetooth.

Has anyone been able to get the new release of Microsoft Voice Command (version 1.6) to work with any AKU 3.2 ROMs?
.........................................
I can also now confirm it seems to work flawlessly with Faria's AKU 3.2 12MB version.
Bluetooth also finally works like it should with my Motorola H700. No need for adjustments or registry changes. Just installed and it has worked flawlessly....so far.

bzpilot said:
Has anyone been able to get the new release of Microsoft Voice Command (version 1.6) to work with any AKU 3.2 ROMs?
Click to expand...
Click to collapse
Works like a champ for me running the 12Mb version of Faria's new ROM.
Kirby

bzpilot said:
Has anyone been able to get the new release of Microsoft Voice Command (version 1.6) to work with any AKU 3.2 ROMs?
Click to expand...
Click to collapse
Worked for me initially with Faria's 8Mb -- until about an hour later, when the whole thing locked up. Suspect one app too many.

works flawless for me to! love the 3.2 rom!

I agree, works flawlessly with Faria's 3.2 including BT! With the AKU 2.3 ROM's I have to install my lil BT cabs... no big deal. 3.2's BT is much improved over 2.3 for sure....

hmm now my ringtone is sometimes blasting in my ear when I get a call...I hate this. just starting doing it! anyone else experience this?

jacob-mda said:
hmm now my ringtone is sometimes blasting in my ear when I get a call...I hate this. just starting doing it! anyone else experience this?
Click to expand...
Click to collapse
If I'm not mistaken that is exactly what is suppose to happen (well, not necessarily the blasting part). It just hasn't been working correctly until now.
These items are known to be able to be edited through the registry (there may be more):
1. BT mic volume
2. BT speaker volume
3. Phone mic volume (normal mic)
4. Phone stereo speaker volume (speakerphone, ringtones, mp3's, voice command, etc.)
5. Phone mono speaker volume (normal in-call, between the status LED's)
6. Handsfree mic volume (wired)
7. Handsfree stereo speaker volume (ringtones, mp3's, etc.; wired)
8. Handsfree mono speaker volume (normal in-call; wired)
Registry location:
HKEY_LOCAL_MACHINE > Software > HTC >
AUDIOGAIN
AUDIOGAIN0
AUDIOGAIN1
AUDIOGAIN2
VOICESETTING
VOICESETTING0
VOICESETTING1
VOICESETTING2
What we really need is a someone who has more knowledge than I who can right a program to allow us to adjust all the volume settings without having to manually go in and edit the registry every time.
Link to other thread:
http://forum.xda-developers.com/showthread.php?t=256734

Yeah, sure was nice to see that 1.6 was compatible with the AKU3.2 roms as I use it almost exclusively to dial out. That it reads incoming email is a nice touch, too.

WM6 Voice Dial from Bluetooth Working!

After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules

Whahahahaha OK i found one bug. And I laughed so hard I almost fell of my chair!
I press the headset button and say "What Calls Have I Missed?"
Wizard Replies "2 Million Six hundred Thousand and sixty eight missed calls!"
Wow but Im one popular guy huh
Jules
Edit
On the next missed call request all seem fine again "You have no missed calls" hmmm gues no one loves me afterall :-(

I have tried reinstalling the cab file and, although it works, it actually causes problems with the SIP! Following the re-installation of voice command, changing the SIP takes for ever! Does anybody have a better solution or a solution for the SIP delay after the CAB Installation? Thanks

I just checked and there is a delay, I only use Resco Keyboard as my SIP so this is not an issue for me. Hope someone finds a solution for you though
Jules

Here is something really wierd! :S Installing the cab solves the BT activation problem but causes the SIP change to be dead slow. I then proceeded and exported all registry entries. Hard reset the machine and import the registry entries previously exported and copied the VC files into C\program files. Soft reset and BT works and also SIP change is as fast as without VC! :S Can anyone explain this?

I would like somebody to cook wwe crossbow rom without Microsoft Voice Command because it's not licensed.

ZaJules said:
After messing around with numerous reg tweaks etc to try and get my headset button to initiate Voice Dial I could not get it to work, in fact I recked my install of WM6 in the end. So yesterday I did a complete re install of WM6 (Orwell Edition) And set everything up the way I like it.
Then I installed the latest MS Voice Dial 1.6 and BOING it WORKS!!!
No reg hacks needed. This is the first time ever I have got my headset to work with MS Voice Dial
Now my life is complete! This was the last little annoyance I had with WM6.
I am happy to say this is with out a doubt the best rom I have ever used.
Jules
Click to expand...
Click to collapse
Hi guys,
fink ive missed something here. voice commands using bt with msvc and wm6 were not working as i know. did u install any fix?

Native WM6 Voip client?

All,
I was wondering if the built in WM6 Voip client can be activated or be put in if it does not yet exist in the WM6 builds.....
Currently I use Fring for my Voip calls, but I would really like to use the built in client for better native support.
Other WM Voip clients are also welcome....
Cheers,
HJ

Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493

mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi Mrabie,
Are you still using VOIP? Please confirm if it used the standard dial pad and if it also uses the front speaker?
Cheers!

There's nothing for the Kaiser that uses the front speaker yet.

Do we know what this is? I assume you mean Voice Over IP (WM6 Built in) currently uses the loud speaker.
One would assume the normal phone speaker could be used (since my old Hermes could).

Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you

lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Same here, works excellent!

has anyone managed to get the native voip client to work on the kaiser?
I can receive a call but not make one.
when trying to make a call ; I get the error "Network service is not available. Try again later."
sometimes it has worked....
Was working perfectly fine on my hermes (imate jasjam)

lingalan said:
Hi Guys
I am using my company's VoIP service though my TyTn II. Everything is great! And the voice is came out from the ear speaker.
I installed the SIP Config Tool v. 2.0.1 and WM6VoIP.cab
Thank you
Click to expand...
Click to collapse
Great!
I have loaded the 2 cabs and have made some minor progress.
If i reboot the Tytn II is says connected for a moment then it goes to 'searching'. This is over the home wifi network.
When i first loaded the cabs and tried to initiate a call, it did show my voip provider in the dial pad, but now i cant replicate that to test it actually works.
What should i do?
Cheers
Edit: it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!

GLO said:
it now says 'available' om the today screen, but i cant get it to dial out using the voip connection. Note that i have not set up dial plans yet. but i think i have made good progress so far!
Click to expand...
Click to collapse
tap on the name , it needs to show as "selected".
let us know if it works for you.
I can only receive calls.
interestingly, nothing ever arrive on the voip server when i try to make a call; i run my own voip server (asterisk) , and no packet ever make it to the server from the windows mobile device...
warning, numbers must be numeric only, no + or # etc...

Do you mean to select it from the 'Today screen'
If that is what you mean, then when i click on it it takes me to the phone settings tab for internet calling.
Mind you, in that tab it states:
Internet Calling
To set the calling network for your next call, select BBPglobal (my Voip account) on the Today screen.
options: whenever available
Only if cellular is not available
Never
I have it set to whenever available and have also enabled GRS/GSM calls as per SIP config 2.01.
Whilst it now always shows that it is available, i dont see how else i can select it.

if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work

jyavenard said:
if you move the cursor in the today screen to go on the voip plugin, press OK (the button, not using the touch screen) you can change the status to "selected"
Forgot to add: your SIP server must support g711 (ulaw or alaw) codec... none of the low-bandwidth codec work
Click to expand...
Click to collapse
I move the today screen curser to highlight the voip plugin, but nothing happens when i hit OK or press the big silver button in the middle.
Regarding the SIP server sip2.BBPglobal.com does support g711. Well i was thinking that the phone simply makes a connection to the wireless router (Asus WL500gP running DD-WRT v23sp2) and that would be it. I could be wrong but i think this way simply because i replicated the SIP settings from my ATA (Linksys SPA2102).
Plus i would imaging that when using the VOIP over 3G that it connects with the same settings from the SipConfigTool1.02
Have i missed the boat somehow?

can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?

Would be also interresting for me.
I've tested 3 Types of VOIP software.
- Fring => Comes out of the loudspeaker
- Pocket Talk => Comes out of the loudspeaker
- Prop. WM6 => Could not connect.
Kind Regards
Seppl

I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).

mrabie said:
Had the same problem i thought that the built-in VoIP client ships with WM6 but it didn't find it on my TyTN II, you can download it from here
ftp://xda:[email protected]/WM6VoIP.CAB
you can find the SipCofigTool very nice utility to config VoIP
http://forum.xda-developers.com/showthread.php?t=303493
Click to expand...
Click to collapse
Hi,
the first link is about Hermes?! I tried it, but it creates two today plugin...why?!
Is it possible that on the latest Kaiser native ROM some parts of WM&VoIP.CAP is already installed even if there is no Internet Tab under Pgone Settings?
Second: I had universal befor and a cooked rom, and when I clicked on the today plugin I could select or unselect voip for calling. With this cab instead, if I click on the today plugin, I enter into Start->Settings->Phone->Internet.
Third: I looked at ftp://ftp.xda-developers.com/Kaiser/VoIP/ and there is a SleuthKaiserVoIP.cab...what is it?? Maybe the WM6VoIP.cab versio for Kaiser?

monakh said:
I can use Fring/X-lite but the sound comes through the speaker. The WM6 native client can logon but not make any calls (same message as the poster above). I think I can receive calls though (but I have not tried).
Click to expand...
Click to collapse
I get the same problem using PocketTalk!
Stefano

snyfer said:
can you tell us which version of WM6VOIP.cab you are using - as in my version the sound comes out of the loudspeaker instead of the earspeaker?
any suggestions?
Click to expand...
Click to collapse
How many versions are there?

Codec ???
What codecs are supported by the built in VOIP? Maybe the issue of not able to make a call could be codec related like in any other VOIP softwares.
- TKN

MS Voice Command instead of Cyberon Voice Commander for AT&T Tilt with Alex's ROM?

MS Voice Command instead of Cyberon Voice Commander for AT&T Tilt with Alex's ROM?
Hi -
I have an AT&T Tilt, unlocked thanks to jocky, and running Alex's ROM (v5.HTC.181).
I'd like to replace the Cyberon Voice Commander which is in Alex's ROM with Microsoft Voice Command.
I *think* that the AT&T Tilt, by default, did have Microsoft Voice Command on it, which suggests that I have an implied license for it... right? (And I did buy Voice Command 1.6 SmartPhone for my earlier S620, so I have probably double-paid for it anyway...)
So, how do I get that original piece of AT&T-installed software back on this device after having flashed Alex's ROM?
I just prefer MS Voice Command's ability to search Contacts by sound, over Cyberon Voice Commander's requirement to voice tag individual contacts.
Thanks
-Jay

Jay
I do not think that MSVC shipped with the Tilt
to put it on your Tilt, just install the 1.6 that you purchased. I have it and the other one on my phone. I don't find the Voice Commander to recognize my voice commands as well as MSVC.
Uh, I had some trouble getting it to work, and frankly, I'm not sure what I did to get it working. I did do these things:
I had installed the patched MSVC files. (search for VOICECOMMANDREPLACEMENTFILES )
I also installed the OEM_Assign_PTT_BUtton.cab, but I'm not sure it is necessary. I'd hold off on that until last resort.
Maybe it will work just by installing it, and the replacement files. I had installed the additional memmaid apps and uninstalling them was one thing I did too.
Sorry, I can't be more exact.

Thanks, that did get Voice Command on and mostly in place of Cyberon Voice Commander. Still working on getting the bluetooth headset button to launch Voice Command.
-Jay

The launch wiht the BT headset was exactly what I had problems with. Again, I got it working, but sadly, I don't know how.

My MSVC worked straight after install..except that I do not get a call waiting tone after installation. Nobody seems to have a fix...2 of my friends with kaisers all have the same problem and we all have different roms.

This thread really worked for me. http://forum.xda-developers.com/showthread.php?t=337501
There are two versions of MSVC in the forum and they both have the same version number. I found that it was impossible to get the 4MB variant to work even with the regedits. (This is the version that you have to go into Programs and enable/save/ etc.) The other variant is only 3MB and has worked on every ROM I have installed it to using the directions in the above thread and no regedits are required.
Hope this helps...

Microsoft Voice Command V1.6.19971

I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?

alanplum said:
I noticed that in the Diamond forum Dutty has embedded MSVC 1.6.19971 into his ROM.
Any ideas where I can find the installation CAB for this?
Click to expand...
Click to collapse
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though

pfcsabre said:
I'm using MSVC_US_PPC_1.6.19214 which is working fine. You can find this in one of the threads in Kaiser but I believe it was taken down for an unknown reason (the thread still exists but the first 5 message and topic title was deleted). The title was something like "The Definitive Guide to MSVC". You can still get it in google cache though
Click to expand...
Click to collapse
We removed the MSVC cab because it is a retail sold program, YES it was put into some official ROMs but after a LONG debate we decided to not allow it in cooked ROMs etc... just such a grey area we didnt want M$ finding another reason to have a go at xda-devs.

i had a feeling it will be taken out eventually, curiously though i was thinking why the guy was banned

MS Voice Command 1.6 German
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!

mr.right67 said:
Hello Guys ...
I read much about MS VC 1.6 cause Cyberon Voice Speed Dial
doesn´t work well in German - and would like to test it now.
Could someone please provide a download link?!
Thanks!
Click to expand...
Click to collapse
Have you read post #3? MSVC is a retail sold program, if you want it please buy it.

Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...

Does MSVC integrate and work with the fuze over bluetooth? I know that it needed several mods to work with both the 8525 and the Tilt.
Thanks

it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again

omaralt said:
it worked perfectly with the at&t rom without any mods at all. and actually after i posted, i realized that i still had the copy that i had download from this site for my tilt. i installed it and it works perfectly once again
Click to expand...
Click to collapse
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?

jglev said:
Does it announce incoming calls over the bluetooth headset? I can't get it to do that. My Tilt did it just fine and I have the Fuze VC set up exactly the same way as my Tilt, but all I get is my ringtone and no announcement.
Any ideas?
Click to expand...
Click to collapse
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)

ITNV said:
I'm sure this is a dumb question but did you double-check the settings? (Start -> Settings -> Personal -> Voice Command -> [Highlight Phone] -> Options -> Announce Incoming calls) and (Start -> Settings -> Personal -> Voice Command -> Notifications Button)
Click to expand...
Click to collapse
Yes. I wish it were that easy. As I said, all parameters are set up exactly like my Tilt which worked perfectly. With the Fuze, I only get my ringtone. Now, I know that the Fuze has a newer version of VC, so I may try to downgrade to the version that is on my Tilt.

omaralt said:
Hey guys, on my fuze with the at&t rom, MSVC was included, now that i've upgraded to romeos rom and it's not included on his rom! i know that you guys are saying its a pay program, but i paid for it when i bought the fuze (as its included in the price).... and i really dont wanna pay for it again...
Click to expand...
Click to collapse
I'm wondering the same thing. Stock Fuze had MSVC, and I flashed to the Elite ROM, and would like MSVC back. Is there any way to flash my Fuze back to stock rom, and pull the cab file out of it??

Unless you can tell me otherwise, the one that comes with the FUZE is defective. Partly... A few of us can't get it to say the incoming caller name or number. All you hear is a bell sound. I've gotten everything else to work like dialing from the headset, even where it says I have an appointment on my BT headset. Just for the announcement of whos calling doesnt work.

Do you have to have the handsset connect to juse VOice C`?

I pulled VC 1.6.19971 out of the AT&T Fuze ROM and included it in my personal ROM and I was able to enable "Announce incoming calls".
On my Nokia BH-501 headset, it begins to announce the call, but gets cut off by the built in headset ringtone. (I only use this stereo headset for music)
On my Oakley Razrwire it works just fine. With 'announce' turned off, the headset uses it's normal built-in ringtone. With 'announce' turned on, I get the VM announcement with my WM ringtone playing in the background (it opens an audio stream from the phone). I use this headset while driving, so it's all good.

Well well... depends on your MSVC-version. 1.6.4622 DOES NOT announce any incoming call regardless of the setting.
1.6.17913 does, 19209, 19213, 19214 does...
By the way: the ultimate FAQ was named The Definitive Guide for Microsoft Voice Command - I posted a backup in another thread.
anyhow, does anyone know the advantages of 1.6.19971 ? Does it report anonymous callers correctly (which none of the above does?)
And why is it that anyone wants to use newer versions without even knowing changes? Maybe it's a beta version, maybe it's buggy... but it's a newer release... using legal german retail (bought it) .4622 with 19209 exe for announcing reasons. Works brilliant on raphael.
But maybe someone knows a list of changes or fixes, advantages or disadvantages in 19971?

I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me

irus said:
I would really like cyberon voice dial 1.2 to work on the fuze but when i press the bluetooth headset it does not work, i have searched but can't find what the reg edits need to be. thanks for any help one can provide me
Click to expand...
Click to collapse
Before or after installing cyberon? - After: Unpairing headset, repair and watch out having it set as default handsfree headset
HTH

MSVC in Dutch?
Hello all:
Is MSVC available in the Dutch language? Its kind of weird hearing my Dutch contacts' names pronounced in English. Funny, but still weird...