Hi!
I've installed the RUU_Prodigy_2080701_101_11310_Qtek_WWE_Test in my qtek 9100 and now i want do downgrade it to the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship ROM
I tried to run the RUU_Prodigy_1060701_101_11310_QTEK_WWE_Ship.exe but my qtek is stucked in the rgb screen.
The upgrade utility says it can't connect to my wizard ... how can i install (downgrade) the new (older) ROM?
Thanks
http://forum.xda-developers.com/viewtopic.php?t=40458
http://forum.xda-developers.com/viewtopic.php?t=41634
Thanks dddrko
I'm copying the old now, hope it works!
More help needed
I have upgraded from 'RUU_Prodigy_2080707_107_11310_QTEK_DAN_Test.exe' to 'RUU_Prodigy_2180705_21807105_20710_QTEK_DAN_Ship.exe'
I wish I did'nt, now I cannot use my Motorola HT820 stereo bluetooth headset.
Please carve it out in big letters how to downgrade to 'RUU_Prodigy_2080707_107_11310_QTEK_DAN_Test.exe'. (It says I cannot downgrade!)
Please help... :-(
Can I use a 64MB miniSD to dump my ROM or is that too small?
Related
I tried to upgrade my Qtek 9090 an failed.
At first i seemed to work. But then it stopped and said "connection error".
When I now boot my 9090 I only see a dark screen.
You can see "USB v2.06" in the background.
I have tried to upgrade again but with no good result.
Please help me!
I have searched about my problem.
It looks like my Qtek is stuck in "bootloader" mode.
To solve this it looks like I must get it to a repair shop?
Or I can get an external boot rom in to an SD-Card and insert in my Qtek.
Correct me if I am wrong.
So. How do I move on?
What file do have have to use?
Should the CD-Card be in the Qtek or kan I use en extarnat SD-Card writer from my PC?
I have the program Multi-port/USB TTY.
Please help me!
Looks like I fixed it my self.
I got an idea from another i this forum.
He told me to try upgrading again on a Computer wich have USB 2.0.
My computer have USB 2.0 and that did not work so I looked futher in to my trouble.
I took my girlfriends computer (AMD400mhz, Win98, USB1.1) and tried upgrading on that. Lucky for me the upgrade program found my Qtek 9090. But when upgradeing I got an error on my extended rom upgrade.
I tried again but exluding the exended rom file when upgrading and now it works.
I still would like to upgrade my Qtek with this rom file BA_WWE_BP_12200_169_10602_SHIP.zip but I will not do this unless I am shure this works.
Thanks the people who have tried to help me.
My Qtek now have the following versions:
ROM 1.22.00 WWE
ExtROM 1.22.126 WWE
Radio 1.06.00
SX66 BLUETOOTH Expired
Hi. I can not use Bluetooth since I downgraded from wm2005 to WM2003. When I set up Bluetooth, it says”
BTTrayCE
Sorry! Bluetooth can no longer be used because the license is expired
BDA: 00:00:00:00:00:00
Key:
E3E534E19B3E8214C543A
73COABB9A9074DD3B175
3515CD8
Please help. Thanks. I have tried completed install from original rom CE nad Radio. But the same problem. The extended rom is dead I can not upgrade it since it faila at 1%.
Please help Thanks.
Hi
Did you carefully follow WM2005 -> WM2003 process described in wiki ?
It's very important that you resize, reformat ExtROM and do some other stuff before flashing back to WM2003.
Good luck
i have the same problem.. since octobre without solution
Hi
I ask again.
Did you guys restore your ExtROM correctly ?
(using Repart_DOC.exe tool)
GO to wiki -> blueangel -> blueangel WM2005 page -> how to downgrade....
Good luck
hi robal
I tried but when i use Repart_DOC
I set size 16384 or other sizes but if I click format now, the error message pops up"
Create handle failed.
Please help. Thanks!
Hi
Maybe You forgot to do as described in point "3" of downgrade process :
Prep your WM5 device by formating Storage and Hive.
Press Power + Softreset, and when the colored stripes (well, this is the bootscreen )shows on the screen.
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
Quickly press Record+Camera before the versions appears at bottom right
OR, press Power+Softreset+Camera+Record at the same time.
If you have a PH20B1 device such as SX66
Quickly press Record+Windows Media before the versions appears at bottom right
OR, press Power+Softreset+Windows Media Player button+Record at the same time.
Either way mentioned above should work.
You'll see three options; change the second and the third to "yes".
If you have a PH20B device such as MDAIII, QTEK 9090, XDAIIs, PDA2K etc.
You can do that with the camera and the record buttons.
If you have a PH20B1 device such as SX66
You can do that with the Windows Media Player and the record buttons.
If you are done, press the mail button, it'll show a white screen for a while, just wait.
If the bootscreen, aka. the colored stripes is displayed, Wait more, you are booting.
The welcome screen to set up your device should appear soon.
Click to expand...
Click to collapse
This should've been done when you had WM2005.
I think it's important to do it, before trying to run Repart_DOC (on WM2003).
Any idea ?
If you've forgotten to do it. You probably will have to intall WM2005 again, do it, intall WM2003 and Repart_DOC it. HUh
have fun
DEAR robal,
Thanks for your information. In fact I did everything like you said before. but nothing help.
I know that I have to creat an extended_Rom in order to get it work. (this is not a big deal since we can install manually.
The most imfortant thing is the bluetooth error. Please help me find a sollutin for it. Thanks!
Hi
So you say, you have WM2003 installed with Extrom CABs from some official ROM ? OK
I'm not familiar with this BT failure. Please tell me exactly what ROM are you using ( CE , Radio, ExtROM )
And what version of BT stack you have.
This error is caused by a portion of the Bluetooth memory being overwritten by something else. The people who are trying to help you are right...you need to reflash the device because something didn't work correctly last time.
I had a tool that restored BT MAC-address, but I cannot find it on HDD.
It was sent by imate tech support as a fix for the "bt license has expired" error, so you may try to contact them, or search this forum.
please mamaich if you can find it this will be very helpful
Dear mamaich,
Thanks for your great imformation. I love to get it as soon as you find it. Again, thanks for your pricious time to repond.
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
new problem come out after previous one
hi, I have another problem so.. i need your help.
before, My sx66 problem with bluetooth and the Extended_ROM did not exist.
Now, after many tried to install rom from Tmobile, O2. sx66 over and over again, the extended_ROM is now okay to install but sadly the Storage doen't exist any more. Also some contact, task .. pop up after full installation. Finally,after extended_ROM Complete installed, window
Connection Flash Mangaer
pop ups" Saved data is corrupted.
System will erase all data to fix
this error
Yes No
but It does fix anything after I click yes button.
Please help to recover my storage. If there any software that can partition rom for ppc. please share.
p.s. the bluetooth now is freezing.
what u hv to do is use the Ext ROM Unlocker and use Repart_Doc...Set the size of yr Ext ROM...say 15 MB or so and then do the Repartitioning...now flash yr device...u will get yr Ext Rom Back with no such errors as reported by you
problem solved.
Dear hdubli,
Thanks for your help. Everything works properly now. Now my sx66 works at factory shipped. I am very happy.
Specailly thank to Hdubi for providing an exellent solution.
hdubli said:
Looks Like every body is stuck...I had solved this problem twice and with full success...on ROM 1.4 pls install the Broadcom 1.6 cab and yes...yr problem is solved... :lol:
Only thing..I was not able to put it install thru Ext ROM...even by editing config.txt....may be someone here can do this :roll:
Click to expand...
Click to collapse
Hi hdubli, a question, what is the ROM 1.4 of the blueangel?
hi...
After i tried to update my T-Mobile Vario to high version of WM5, my device worked with out Radio ROM( GSM ROM), not connected by USB with active syn. , when i entered to color screen my computer make beep means conected but when i wana upgrade SPL & WM6 or downgrade to WM5 connection failed..
thnx
Which is your device,G3 or G4 ? First post the vital data of the phone,like IPL/SPL ? which rom were you exactly trying to flash and how you were trying to flash ? only then its possible to help you out.
hi, I tryed to downgrade my qtek 9090 to wm2003se but I had no success.. i would do it because i have some problems with bluetooth. in this forum I found this article which explains how to fix bluetooth problems ( http://forum.xda-developers.com/showthread.php?t=274425 ) but I'm not able to find all files nedeed... is here someone who can help me? it's the same for me downgrade the rom or fix bluetooth problem.
I have the original rom downloaded from www.pocketdevice.it but when I try to install it, the installation software sais that with wm5 it cannot install the rom (ROM.Qtek.9090.v.1.40.04 ITA).
please excuse me for my bad english! I hope that I've been quite clear to explain my problem..
edit:
I found this page http://wiki.xda-developers.com/index.php?pagename=BA_1.40.00_Upgrade but
# Qtek 1.40.556
# Qtek 1.40.553
# Qtek 1.40.147
doesn't work...
edit 2:
I tryed to restore an old backup but wm5 doesn't accept wm2003se's backup.. wm5 doesn't accept backup at all.. uff..
first to exclude the most common mistakes:
- did you set the phone in bootloader before starting the flashing?
- did you use the BAupgrade_noID.exe, instead of the BAupgrade.exe?
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Lollo_RM said:
- I only tryed to install the original ROM using a USB connection.. Where can I find the other files you mentioned?
- With "bootloader mode" you mean click on the starting button and camera button at the same time? When I upgraded my ROM from wm2003se to wm5 I only connected my Qtek and started WM5 from my computer not using the "bootloader mode"
Click to expand...
Click to collapse
I know that, when you try and flash the original rom or original updates, you usually don't have to do the things above, but, when i had to downgrade to wm2003se, it wouldn't have worked without.
1. i try and attach the _noid.exe that i downloaded with a helmi rom, as google wouldn't find a direct download source and i wouldn't want to search this forum forever, and as you don't search it yourself, i assume you don't want to spend more time looking for it as well. Anyway, the noid.exe is the same flashing prog as the original but it bypasses the check for country id and other crap.
2. the bootloader mode is also essential because, well... i don't know, why exactly, but i assume that not all roms and flashing software manage to enter the bootloader mode correctly, or too late, and you could get stupid errors like it was the wrong device for that flash.
so, i hope, the upload worked, it is everything you need to flash your device, either put the "nk.nbf" of your rom in there, or unpack the original rom and put the noID file in that folder and start it
ok, i did exactly what you wrote and now everything work! thank for you help!
why would you even downgrade? i upgraded mine to wm6 and i think i'm not going back to 2003se
first of all, because english is not my mother language and the os language is english. i found some problems using bluetooth and wifi connections and i could not download the right patch so i decided to downgrade to wm233se
SIM TOOL KIT is the only reason one would want to downgrade
Maybe you could try an 6.1 ROM.
RUU_BA_xplode_WWE_6.11.00 works perfectly and has an standard wm6
interface.
i am problem whit my qtek 9100 (htc wizard)
my qtek is flashing whit rom win-mobile v4 , and the os is very slow, wifi is not work , usb too, the bluethoo is ok is working im sync on my computer whit bluethoo but the upgrade tool on www.qtek.nl , for the original updated rom windows m 5 is not work, error message is , problem communication whit computer and pocket pc, but the pocket pc is sync whit my computer...
i need help for the ultimate method for flashing whit a bluethooth method , im repeat usb is not working , please i need help or the qtek is go to trash... snif
os 1.5.4.2 wm 5
ipl 1.01
spl 2.17
g3
thanks for your helping
my mail is [email protected]
Hi pretty sure you can't flash over bluetooth. If you know someone else with a wizard they could back up there rom onto an SD card which could then be loaded onto your device. Hope this helps
Hi pretty sure you can't flash over bluetooth.
f you know someone else with a wizard they
could back up there rom onto an SD card
which could then be loaded onto your device.
Hope this helps
hi, i have same problem with htc wizard, ipl 1.01 spl 2.17 os 1.5.4.2, and it is stuck in startup, i can`t make hard reset, i cant backup rom to sd because cid is locked. So i have to find who has same phone ant ask to send me rom backup to me?
sorry, my english is not very good...