Guys,
I'm not able to remove any programs via activesync from my wizard.
I can see the programs listed in activesync but I can't remove any of the installed programs; it's driving me crazy!
Please help!
Cheers,
Arne
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Have the same problem, Windows can not delete programfiles. When i install an update of a program, the setup failed. If i delete files manualy i can install the update. Had the same problem with original rom.
hellejoep said:
findus said:
Highlight a selected program and click remove- job done!
Alternatively uninstall programs from your PPC
Click to expand...
Click to collapse
That is exactly the problem; how do I remove a program from my PPC?
Because via Activesync doesn't work.....
The program I like to remove is minimo (mozilla for PPC's)
Thanks!
Click to expand...
Click to collapse
Try....
Start > Settings > System > Remove Programs.
This should do what you are after.
my dear friend thats the problem....by doing any of the above i cannot uninstall any programmes ...it say cant remove programmes but do u delet it from your list of removable progrrames...funny
Same here. Minimo would not uninstall
went to remove prog. it said it did but all it did was remove it from the remove programs list.
Hard reset here we go. Pocket mechanic was the same for me.
It's ok when you exactly know where the program is installed - you should simply delete its files. But how can I upgrade to .NET CF 2.0?
Installer can't remove previous version and I can't delete files manually cause I don't know what files to delete :-(
I've had the same problem trying to remove minimo and the Atomic Cannons Demo. :? So far these are the only items I have tried to uninstall. I just deleted the folders and shortcuts, but I'd rather figure out what's causing the problem!
Running the QTek test ROM (WWE) on a US Tmo MDA.
I also have that. however most of the time it works for me to soft-reset and then remove. for some reason that works (for me)
I would recommend a soft reset just prior to removing software from a WM5 PPC. WM5 only minimises most programs instead of closing them when you click the X so the application stays open therefore files are still in use which prevents a successful removal.
Even if the progam has been closed by Start>Settings>System>Memory>Running Programs or a task manager like in SPB Pocket Plus there is a chance that there are still associated files locked open unless a soft reset is done before uninstall. Windows Applications on the desktop will normally prompt for a restart after uninstall if files were in use however it looks like the majority of Windows Mobile apps (or Windows itself) dont have the same functionality (some Mobile apps do prompt for restart but not very many).
Also, apps with today screen plugins should be disabled, before a soft reset then uninstall the app as WM seems to lock the files open when active on today screen as well.
I havent had the uninstall error once since i have done a soft reset before uninstalling any software, hopefully others will have the same success. I know this wont apply to every situation but so far so good for me. :wink:
Cheers
Chris
Puckster is right.Run your task manager to see all runing programs and close them before trying to uninstall or simply soft reset prior to uninstall.It works without a flaw.
Related
I am trying to delete programs that I believe I don't need. I use WiFi and do not have T-Mobile Internet Plan. Would I create a problem if I delete the following:
DAT MailTrigger
OZ Communications OM IM
T-Mobile HotSpot Login Utility
Thank you!
Are these in your Remove Program list? If not, you may not able to 'uninstall' these nicely.
What I suggest is that you may want to have a look on your Ext ROM, get all the CABS file there. Use some CAB managers, to open each of them and see where they have places the files and delete them. If things goes wrong, you can always have it installed since you already know which CAB is responsible for which.
Or, if you can affort a hard reset, reset your device and do not allow the Ext ROM to be install (e.g. soft reset your device after the security setup). Then, go into your Ext ROM and install the CAB files one by one, to identify the CAB files that you do/do-not want to install. This will give you a clean installation.
hanmin said:
Are these in your Remove Program list? If not, you may not able to 'uninstall' these nicely.
Ys, these are in my Remove Program list. They are loaded apps/software that is part of the T-Mobile total package. I did not load these using a CAB file. I guess I will just take a chance and remove them and see what happens. Like you said below I can do a Hard Rest if I need to. Thanks for your input. I do appreciate it.
TonynMI
Click to expand...
Click to collapse
I remove those apps if I remember too and since I've never had a need for their functionality, I've never had a problem because of uninstalling them. All you really gain, however, is a tiny bit of memory...which is probably why I usually don't remember to remove them.
Just completed removing the following:
Memory Available Before/After Removal: (Saved
DAT MailTrigger 3450/3624 (174)
OZ Communications OM IM 3624/3629 (5)
T-Mobile HotSpot Login Utility 3629/4052 (423)
Restart after removal and no problems.
Thanks for your responses.
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
I am also having activesync issues.
No Ideas?
Is there a reg hack anyone can think of? My bigest issue is not being able to uninstall/install anything!
Please specify more on the active sync issues? You might have to do a hard reset, or else this problem will stay. And are you talking about the ROM built apps or apps you installed your self?
gehcmatt said:
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
The other odd thing is that cant install anything now. I tried to install a cab and I received the "programs was unsucessfully installed". The last program I installed before I noticed this issue was resco. Any ideas, I dont want to try a hard reset. Thanks.
I am also having activesync issues.
Click to expand...
Click to collapse
I have had the same problem twice already.
The first time I did a hard reset and started from scratch, the second time (this week) I just restored a backup I made with sprite backup and everything was working again
Just make sure the backup, (you do have one don't you) was made when the remove programs still showed the programs that were installed.
active sync issue
when I connect the tilt to my laptop active sync on the computer sees the tilt but I cant sync. I can explore the tilt. When they connect the computer says close to the following, "Sync cannot be completed sucessfully. Reconnect your device and try again. If the problem persists see active sync help." I click ok and a new profile is create each time.
Now for what active sync says on the tilt. It says, "To synchronize your device with a desktop computer, install the synchronization software from the Getting Started Disc included with your device on your PC.
IF you company supports syncing directly with its Exchage Server you can set up your device to sync to it.
Learn more about synchronizing with a server."
The Sync button is greyed out as is options.
O ya, I did do several sprite restores from as far back as one month, (I do a backup at least twice a week) and still the same issue.
Any ideas?
gehcmatt said:
When I clicked on the Remove Programs icon, the Programs in storage memory was blank. No programs were listed. However, all the programs on the tilt work.
Click to expand...
Click to collapse
Your registry is corrupted and the solution is a hard reset and then reinstall of your add on programs.
I've seen this several times on the Wizards. I've also seen the same problem in Win 2000 and Win XP.
If my reg was currupt, couldnt a restore fix it? I have tried that to no avail.
ive had this issue before, Just delete the partnership and create a new one/ restart computer(had too for my case, maybe it will help yours).
gehcmatt said:
If my reg was currupt, couldnt a restore fix it? I have tried that to no avail.
Click to expand...
Click to collapse
The problem is more then likely that your backups all have the same problem in them.
The only solution I could find is to do a hard reset (clear Storage) reinstall all apps etc, make a backup and keep it in a safe place then make another backup whenever something is added or removed, just make sure that all programs show in the remove programs screen before you make the backup, otherwise a restore will not help.
Another observation I have made is that each time it's happened to me I've either dropped or banged the PDA.
Thanks all for your help. Say if I do a hard reset and then do a restore from a backup, will I have to Reinstall all the software? The reason I ask is that I bought this phone used on ebay and it came with all the software loaded. There are a lot of programs and I cant find the installation programs on the phone of sd card.
gehcmatt said:
Thanks all for your help. Say if I do a hard reset and then do a restore from a backup, will I have to Reinstall all the software? The reason I ask is that I bought this phone used on ebay and it came with all the software loaded. There are a lot of programs and I cant find the installation programs on the phone of sd card.[/quote
You will need to reinstall all of the software first, and then do a restore.
BUT as I have said, if the backup is the same as the PDA ie: no programs listed under uninstall it won't help, you will need to reinstall everything again.
Click to expand...
Click to collapse
Moved this question to a new thread. Still need help with this issue! Thanks
Specifically what is the current problem?
Hi,I had uninstall HTC cube with SKtools and after the remove i found the HTC Biotouch cube still listed on the system remove program list
when I try to delete it the system says "the program doesn't remove completely ,do you want remove from the list?’" then yes,but it still there,and I found there is no key in HKLM/security/appinstalls also HKLM\Software\Apps\, can anyone help to remove it?
many thanks
wwder said:
Hi,I had uninstall HTC cube with SKtools and after the remove i found the HTC Biotouch cube still listed on the system remove program list
when I try to delete it the system says "the program doesn't remove completely ,do you want remove from the list?’" then yes,but it still there,and I found there is no key in HKLM/security/appinstalls also HKLM\Software\Apps\, can anyone help to remove it?
many thanks
Click to expand...
Click to collapse
Using WinRAR or a similar application, uncompress the cab you originally installed, look at _setup.xml or the .000 file and delete the registry keys / files specified there. Soft reset for posterity.
Hope this helps!
wwder said:
Hi,I had uninstall HTC cube with SKtools and after the remove i found the HTC Biotouch cube still listed on the system remove program list
when I try to delete it the system says "the program doesn't remove completely ,do you want remove from the list?’" then yes,but it still there,and I found there is no key in HKLM/security/appinstalls also HKLM\Software\Apps\, can anyone help to remove it?
many thanks
Click to expand...
Click to collapse
Hi dude
In SKTools what are your "Installed Programs" settings??
Try to set the options like this:
2) - Do not use Setup.dll -> No (default)
- Allow risky operatios -> Yes
- Forced files and folders deletion -> Yes
- Exclude strings -> windows\.... (default)
than reinstall the Cube, soft-reset, uninstall using SK, soft-reset and look for it in the SK Install app
2) if 1) still doesn't work try to set also the last option:
- Exclude strings -> (nothing, delete all)
than reinstall the Cube, soft-reset, uninstall using SK, soft-reset and look for it.
However, after the whole operation set again the SK Install options to default (or you can allow the "Forced files and folders deletion", like for my usual option), expecially the "Exclude strings" one!!
Let me know!!
Ciao
guys,thanks for help,but none of the methods works, the HTC Biotouch still there, I've had no idea.anyway,still thanks for help.
wwder said:
guys,thanks for help,but none of the methods works, the HTC Biotouch still there, I've had no idea.anyway,still thanks for help.
Click to expand...
Click to collapse
Ok,concerning SKTools (what version??), did you well follow all my steps above-mentioned??
Than, i can understand that SKTools doesn't work but "Alex" said you how to manually delete it, so what's the problem in this way??
I add that some files could be hidde/system, so you need a 3rd party explorer software, like Resco Explorer, to see and delete!!!
Hope to help you!
Hi, i'm having a problem uninstalling apps on the kiaser and on the pc. It says for example " ERROR A_CS2U2 was not completely removed. Do you want to remove it fro mthe list of installed programs" and when i click yes or no nothing happens.
Does anyone have this problem or have a way to fix this issue.
thanks in advance
i have the same problem, but with keybord and music player applications
tuffmek said:
i have the same problem, but with keybord and music player applications
Click to expand...
Click to collapse
Do you guys still see the program in ur windows folder on your device or in your remove programs section?
slawcop` said:
Do you guys still see the program in ur windows folder on your device or in your remove programs section?
Click to expand...
Click to collapse
well for me i deleted the program fro the windows folder, but thats after trying to remove it the normal way 5 times. it's still in the remove programs section though.
Can not remove program try---->
Try sktools it has a "remove" function. I was finnally able to remove my "freedom bluetooth keyboard driver" from my tilit....
I googled it and came up with this site: http://www.s-k-tools.com/
check it out
Hi,
I need some assistance, if possible...
Namely, on my TyTN II (Windows Mobile 6.1.) I have installed Manilla 2D. It worked fine, but suddenly it "blocked", meaning I have start screen where is says "tap here to launch TouchFlo", and when I "tap it for few seconds it's written "launching TouchFlo", and that screen returns to previous message "tap here to launch TouchFlo"...
I've tried to reinstall Manilla, does not help.
I've tried to remove the program over Settings -> System -> Remove programs, but it can not be removed like that...it always remains installed.
Is there a way to remove this program?
Thanks in advance
Try this..
go to Start-Settings-Today-Items and see if TouchFLO is checked. If it is, uncheck it , softreset, and try removing again. Soft reset.
judas18 said:
Hi,
I need some assistance, if possible...
Namely, on my TyTN II (Windows Mobile 6.1.) I have installed Manilla 2D. It worked fine, but suddenly it "blocked", meaning I have start screen where is says "tap here to launch TouchFlo", and when I "tap it for few seconds it's written "launching TouchFlo", and that screen returns to previous message "tap here to launch TouchFlo"...
I've tried to reinstall Manilla, does not help.
I've tried to remove the program over Settings -> System -> Remove programs, but it can not be removed like that...it always remains installed.
Is there a way to remove this program?
Thanks in advance
Click to expand...
Click to collapse
Go to start >settings > today > items and uncheck Touch Flo do a soft reset and then remove with remove program.
M2D usually does that when there is a conflict with another app what new apps have you put on your phone recently or were you just trying to put M2D on your phone ?
@azahaidi/denco7
Thanks for advice. Still, did not helped.
I've cheked TF out, went to Rermove Programs and after inital question "Do you want to remove....",and after pressing "yes", I got the message "XDA-Team Manilla 2D" was not completly removed. Do you want ro remove it from the list of installed programs?"...I press "yes" again, but than happens nothing, program is on list of programs in storage memory.
It is not any more in Today -> Items, but on list of programs still exist.
I've try to install some newer version of M2D v21, but I just got the message
"Instalation was unsuccessful. The program or setting can not be installed because it does not have sufficient system permissions."
I mean, WTF is now this?
why dont u have a try on sktool .... use that tool clean registry & bad uninstalled info and so on ...
tsfatt said:
why dont u have a try on sktool .... use that tool clean registry & bad uninstalled info and so on ...
Click to expand...
Click to collapse
I don't have that tool...
I thought (well, hoped) that there might be a way to make it with current standard programs...