Hot to compile own Backup .exe? (Killed my Wizard today) - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Hi *.*,
I switched on my XDA Mini S today, and accidentally pressed a second button (Camera or so).
The only thing i saw was "Formating BINFS ... done ... checksum error".
D*mn!
I tried to switch it on again by reconnecting the battery, but it seems everything was deleted. Just Bios-Screen with 3 colored bars.
So I got my romdump back on my MiniSD with ntrw.exe, and tried to recover that one. Didn't work. Any shortcut-trick (Reset-Button + Commmgr + Camera and so) didn't work out.
Then I connected via romupdate115 and looked for the correspondent command of "r2sd" - but even "?" or "h" didn' work out there.
Well, finally, i reanimated my phone by executing a Rom-Update .exe File.
So, just to be sure for the next time. I want to compile my own ROM Backup taken with r2sd to one .exe-File which I can execute on my PC and which will reanimate my phone, when it sould be this dead next time.
Any ideas on how to do that?

Related

Tera Term for Windows XP?

Do any of you have a program that I could use to sync my phone to my Computer via usb? I've tried several versions of Tera Term with no success. I reached the point where I was ready to pull all of my hair out and then I remembered... I don't have anyway. Oh well. Please help I really want to upgrade my rom but I want to back up the old first. Thanks, Vern.
i think i don't understand what you're trying to do!?
Don't you use ActiveSync for Syncing with your PC?
And wtf is Tera Term???
This is what I'm trying to do:
Originally Posted by kdenninger
To back up the firmware on the MDA to an SD card (a VERY GOOD IDEA if you intend to fool around with new firmware!)
1. Get a 128MB SD card. They're cheap - under $20.
2. Insert said card.
3. Go to http://forum.xda-developers.com/viewtopic.php?t=37386 and download the aWizard utility. CID-unlock your phone. (You only need to do this ONCE, even if reflash in the future.)
4. Get a terminal program that can speak over the USB port. There is a patched version of Terraterm out there, along with a few others. You need a way to connect to the device over the USB port as an ascii terminal.
5. Turn off the phone.
6. Holding the CAMERA key, press the power button for 2-3 seconds. Continue holding the CAMERA key until it comes up in the tri-color screen.
7. Connect the USB cable. Wait until ActiveSync tries to start. CTRL-ALT-DEL Windows and kill the process wcescomm.exe (ActiveSync's communication driver)
8. Now start your terminal program and point it at the USB port. Hit RETURN and you should get a command prompt. You are now talking to the phone's boot loader in terminal mode.
9. Type "r2sd all" and hit RETURN.
10. If you get a security level violation, you DID NOT CID-unlock the device. Go back to step #1.
11. The ROM image (all of it) will be written to the SD card. Several messages will be displayed while this is in progress. Note that this is NOT - I repeat - NOT - a filesystem-formatted dump - it is a RAW image of the ROM with some checksum information included. Anything on the SD card will be destroyed - don't do this with a card that has data on it you care about!
12. You can stick this card somewhere to be used for restoring. If you want to save the image off the card to your computer, stick the SD card in your computer and then dump 128MB of the card starting at the front (the actual dump is about 80mb but will always be less than 128MB, so that's "safe".) You will need a tool like "psdread" or any other tool that can do byte-level I/O to the SD card in your PC's reader for this.
To restore a SD-card image dump to the Wizard:
1. Write the image to the SD card. Again, this is NOT a filesystem - its a RAW image! Unless you saved the image to the card from the Wizard initially you will need a tool that can do a raw write to the SD card in your computer.
2. With the Wizard OFF, insert the card into the SD slot.
3. Hold BOTH the CAMERA and VOICE keys and press the power button for 3 seconds. Release POWER.
4. Look CAREFULLY at the Wizard screen. The backlight WILL NOT BE ON! It will tell you to press the VOICE button if you wish to restore the SD card image. This message only appears for a few seconds and the backlight is OFF! If you wait too long you will end up at the tri-color bootloader screen. Press the VOICE button (if you still have it down, let up on it then press again.)
5. The restore will run. Note that the backlight IS NOT ON during this process! You may need a flashlight (or very bright ambient light) to be able to read the progress meter.
6. When the process is complete it will tell you to press "any key". Do so and you're back in the tri-color bootloader screen.
7. Turn off the Wizard with the power button. When you turn it back on, it will hard reset just as if it was brand new off the firmware you just restored.
Note that this is the ONLY way to recover from a bricked phone if you try to load the wrong firmware file using one of the "forcible" methods (e.g. aWizard) on a non-CID-unlocked phone, and have bypassed the normal protection methods as ActiveSync cannot get back in there under these circumstances.
I strongly recommend that if you're going to futz with firmware, that you get yourself a 128MB card, make one of these dumps, and TEST the restore before you play around. This will recover from almost any botch - the only exception is loading a firmware file via some means (e.g. "aWizard") that the phone cannot execute at all.
Note that I do not know if this will get around the "boot loader version is too high" problem - I'm not willing to try it until I have an official T-Mobile update with a newer boot loader.
This same method for both dump and restore works on the SDA as well.
13. Overclocking the MDA (do so at your own risk!)
Quote:
Originally Posted by Scaw
Use Smartskey, read about it in this article on my HTC Wizard Blog. No specific ROM required, overclocking integrated. You need to download OMAP Clock seperately, it is available from the same article. A small tutorial in PDF format is included in the .zip with Smartskey. Don't forget to remove the ";" (without the quotes) at the beginning of the overclock settings in the configuration file!
How fast you can clock it depends on your device, it's just a matter of trial and error. 240 seems to be safe for the majority of HTC Wizard owners. No need for extra tools to wake overclocking up after a soft reset or standby. I haven't noticed severy battery drain, I can easily use my device a whole day and come home with the batterie well over 50% charged.
It's just a great little program. The integrated overclocking comes as a bonus to the tweak that the program was actualy made for, remapping buttons so you can open the start menu without using your stylus and close programs without using the stylus.
Have a look around on the HTC Wizard Blog, there is lots of other stuff that you may find useful.
And Number 4 is WTF Tera Term is. Thanks.

BlueAngel BootLoader

Hello Everyone,
My BA is stuck at the Splash Screen, I suspect that the Bootloader is corrupt. Does anyone know how to flash it?
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
imatrix's suggestion.
@imatrix
Followed the steps before, and followed them again.. I'm still stuck.
Something interesting happened though:
There are two horizontal stripes across the splashscreen now.
I already tried to flash the OS, It doesn't work with the standard imate flash executable (It used to work before) and now I'm getting a 'MODEL ID ERROR' when I try to flash it using the BAupgrade... executable.
I tried with the MAupgradenoid tool, it flashes but I still get stuck on the splashscreen...
Thanks,
Wadih
BlueAngel Bootloader
Anyone has a way to either dump a bootloader file for the BA (Providing the file of course) or alternatively directives to copy it from another device (From the same make, i.e. Imate PDA2K) ?
Many thanks,
Wadih.
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
@imatrix
imatrix said:
try this
http://forum.xda-developers.com/viewtopic.php?t=49611&highlight=model+id+error
imatrix
Click to expand...
Click to collapse
I did, but as I specifed in me earlier post, eventhough the MAUpgradenoID flashes the files, I still get stuck at the splashscreen.
Interesting point: After flashing witht the MAUpgradenoID, I try reflashing back with the BAupgradeid.. I get the Model Error ID error back..
Something in the BA is wrong, and I believe it may be in the Bootloader. So, is there a way to replace the bootloader itself?
EDIT: By the way, I can't seem to be able to place a WM5 rom instead of the WM2003, although the flashing procedure starts, it quickly ends (i.e. without the percentage bar appearing) and says that the flashing worked successfully... But nothing gets actually flashed.
Many thanks for the help imatrix.
Regards,
Wadih.
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
@imatrix
imatrix said:
hey,
check this out http://buzzdev.net/component/option,com_remository/Itemid,100/func,select/id,38/
but i have to warn you, replacing a booter is very dangerous, anything goes wrong during process will kill your device. so please handle with care.
imatrix
Click to expand...
Click to collapse
Thanks for the link, but how do I copy/get a clean boot bin file? (Which app, syntax, etc...)
Cheers,
Wadih.
BlueAngel froze on isalling wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
BlueAngel froze on installing wm6.5
much respect 2 all.I'm new here.i tried installing wm6.5 on my Blue Angel i tried putting it on a memory card i pressed power reset hold Camera and Record no luck. i didn't noticed this rom is for the Touch Diamond.i opened the file in the memory card and there was many files.i installed a few files i clicked one file and it froze.what i got is message serial on the top the screen and on the bottom of the screen is v1.02.i also tried sync it with computer no luck.can some one please help me and direct me 2 get wm6.1 because when Blue Angel 6.5 i was directed for the Touch Diamond rom.much respect.thanx a million thanx in advance.lol.
---------------------------------------------------------------------------
Learn 2 live & live 2 learn.learn 2 listen & listen 2 learn.Live 2 love & love 2 live.
We live 2 die & we die living.
life is what u make of it
100/100 work
imatrix said:
try this for whoever get stuck at boot screen or in bootloader mode
1. Download mtty v1.42 from http://files.pdamobiz.com/ROMs/XDA/mtty1.42.rar
2. Stop ActiveSync, by Task Manager (press Ctrl + Alt + Delete)
kill two processes rapimgr.exe and wcescomm.exe
3. put your device into Bootloader Mode by pressing Power + Record Button and Soft Reset.
4. Run mtty (from downloaded) Choose WCEUSBSH001
5. type "set 14 0" without the quotes to tell bootloader to boot the OS after reset.
6. type "task 28" to get your device formatted
7. type "task 0" to ask your device reboot
8. take the device out of the cradle, and manually reset it if it does not do that already.
good luck.
imatrix
Click to expand...
Click to collapse
thaks br very good
Hi, I have the problem, that windows does not recognize the Blue Angel any more, so no "WCEUSBSH001" available. Any help??
Thx

Windows 7 & HTC Drivers Issue

Hi
I have tried the dummies guide concerning updating the HTC USB drivers but had a couple of issues:
1. If I press F8 during the boot process I get an abreviated version of the bois setup which has no selection for turning off digital signing of drivers. I have an ASUS motherboard so to enter the bois I press the DEL key. Whilst in the bios I can see no option for turning off the digital signing. The instructions in the thread simply don't work.
I have done some searching and found web pages that explain how to enter the command window, paste 2 or 3 lines of text to turn off digital signing and put W7 64 bit into a sort of test mode. I have done that and have "Test Mode Windows 7600" in the bottom right corner of my Desktop. I still can't install the HTC USB driver as it brings up an error due to being not signed.
Without installing the new driver I cant change my ROM. There must be others in the same boat having changed to Windows 7. Please help.
Ok a few things:
I'm on windows 7 x64 build 7600, I'm having NO problems, just connect your device in windows let it connect with active sync
Then de-connect your blacktsone, shut it down, and hold volume down button then press start up, it will now start in bootloader mode
Now re-connect and wait for it to get installed by your pc!
If you really DO need htc drivers
Go into your bios
Turn of any quick booting AND turn off full logog display
When windows is starting AFTER the bootscreen you'll get a screen with some sort of TABLE in it with all your hardware and all they're IRQ's
at THIS moment when you see this table press f8
Then you get a boot menu
and you can follow your guide with turning off the signed drivers etcetera!
Great Greet Giblet
wow dude, treat me like the idiot I am. Step by step please.
"Then de-connect your blacktsone" - i guess you mean take out the USB cable?
I wait for it to get re-installed but nothing happens whilst in bootloader and the word serial stays at the bottom of the screen
OMG
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Some options to get a new ROM on your device:
Alternative Option: Run ROM from storage card (this requires HSPL on your device)
- Connect your phone to your pc with the usb cable
- Choose Disk Drive option on your phone when presented with the choice.
- Extract the downloaded rar and if not called BLACIMG.nbh rename the romfile to that (ruusigned.nbh is commonly used so rename when so)
- Copy the BLACIMG.nbh to your phone's storage card via Windows Explorer where it should show up as an removable harddrive.
- Disconnect your phone from the pc once copy has finished.
- Shut down your phone.
- Press Volume Down (left top of phone) and keep it pressed while pressing the Start button (on top of phone) once.
- The bootloader (red,green,blue,white screen) will now start, it will detect the new rom file and ask you if you want to update your current one.
- Confirm and follow instructions on screen
Done.
As for your unsigned drivers i can offer some tips:
- Press F8 after you have seen all your hard drives recognized in the bios bootup screen but before you see the Windows Logo.
- F8 might be set as a bootselector menu by your motherboard manufacturer, if this gets in the way of trying the get to the F8 options from Windows you can disable it in your BIOS (to enter press del)
- If you have Windows 7 Ultimate you are entitled to XP-Mode which is basically a built in virtual machine of Windows XP within Windows 7, some people have been succesfull connection their phone to that XP installation and were able to update via it.
Hope this helps. together with the previous poster's comment you should come a long way, good luck.
Heefy said:
Oh my god, I am really frustrated becuase I managed to get it to work with your help but I don't know how. I must have tried everything 10 times without luck then all of a sudden it worked.
If only I knew what I was doing wrong I could pass it along to the next poor sap.
Thanks for your help.
H
Click to expand...
Click to collapse
Oh lol, guess you just managed, grats on that. for future you could try the alternative option i posted, works garanteed irregardless of operation system.
Solution found, thread closed
In future try posting such queries in the Dummies guide: updating HTC USB Sync Drivers thread. Thats what its there for

PS Freedom Xperia Walkthrough [UPDATED 2/1/11]

Happy new Year and thank you for yor feedback, I may be late to the party but my work is killing my spare time. So, Iam trying to update the walkrthough to cope with the ongoing developments.
On a side note I've upgraded my xperia to an android device but Iam keeping it for jailbreaking purposes
Lets get it on!
Assuming your device is covered in the compatibility list you have to have the device rooted.
For how to Root (HARD-SPL) Your Xperia X1 check Here!!
Then its a matter of OS, in this thread we are talking about HTC Devices that run WinMo as a native Operating System. This hack works only in Linux enviroment so we need Android to run on the device.
How to run android depends on the particular device so one must go to the respective thread.
For Xperia its this thread
The Froyo Development has stopped but the current version is far superior than what we used some months ago.
In short dowload the xdandroid stuff, put the unrared files on your sd's root and boot through HARET once.
-
We now should be at a point that our device boots normally to The 2.2 froyo android version through Haret. Then we have to replace the module and zImage files with the PSfreedom respective ones plus the psfreedom.ko file. All these should be placed and overriten in the root folder of the SDCard.
Here is the latest Payload for Xperia
(need some help with the changes, but Iam impressed so far with the outcome)
All the preliminary work is done, now for the ****ty "do this everytime you wanna play back ups" job
Assuming the phone is off...
Turn it on
Wait for winmo to boot then run HARET from the device's file manager
Wait till android fully boots and navigate to the menu->DevTools->Terminal Emulator
in the terminal you must enter the following lines...
su(enter)
cd(space)/sdcard(enter)
insmod(space)psfreedom.ko(enter)
Click to expand...
Click to collapse
At this point the phone is ready
Pull out the power cord of the PS3 (or flip the backswitch to off)
insert the phone at the first usb port (preferably with the shortest USB cable you can find)
flip the switch or insert the power cord
wait 3 to 4 seconds
press power on followed quickly by eject
you should hear 3 short blips
it takes 5 seconds for PS3 to boot
and DONE.
if it doesnt succed just repeat the process. if it never suceeds then you don't run @ 3.41 FW
[UPDATE#0] I Updated the PSFreedom Files link from the "Homebrew only" Free version to the Backup Enabled "Full" Version. Still Ver 1.0 though...
[UPDATE#1] It definatly needs 4,5 tries, I cannot get it to work in the first try...
[UPDATE#2] Everytime I try to run a backup my FAT PS3 Freezes... and to think I came this close...
[UPDATE#3] Stupid me, didn't check it out in the above compatibility list... tried another one works like a charm
[UPDATE#4] If you are 100% sure you did everything right and still you cannot perform the exploit on the console you should not turn off the device and boot it again, you can have it in terminal mode as long as you wish and perform the exploit on the PS3 again and again... This is also usefull when the console freezes or crashes, you just perform the power cycle only!!
Well There goes one day of my life I think I covered more than the basics, If you thing I helped you I would appreciate a line or two
[UPDATE#5] Went out today and felt like spending 300 Euros, got my self a Slim one. I will be testing it later today...
[UPDATE#6] I found out that the PS3 Slim model has a much greater success rate for the hack to work. Also, I tried all the steps and bypassed the active sync stuff and I can confirm that by bypassing it, IT WILL NOT WORK
[UPDATE#7] 5 Days into this and 3 with the slim model, slim works better BUT, the problems occure because of the xperia hardware/xdandroid port... it works but not always, its nerve wracking I know, so do the Developers of PS Freedom as they updated their wiki Raphael page page in the problems worning section.
aaaanyway, Tomorow Iam upgrading my HDD my old one is full.
[UPDATE#8] 11 days later and I have updated my fat ps3 to 3.42 and kept my slim hacked. Its a tedious work to enable every time xdandroid and the psfreedom hack but as I said it is free, anyway, having the slim console AND a very short cable (mine is 10cm) works EVERY SINGLE TIME, no probs with that. I had though 2 issues of console freezing... I don't know if it is the hack or my new HDD (7200rpm) nothing serious though...
[UPDATE#9] I've tried to replace the active sync step and connected the device to ps3, first time it worked, second time it failed...
[UPDATE#10] Well, thats it for me, I could no longer cope with the tedious steps in order to play for an hour, I've bought a jailbreak clone and flashed my xperia with a diffrent rom and formatted my SDcard. for the time being, Iam no longer using the Raphael hack...
[UPDATE#11] As it turns out my jailbreak clone is not upgradable (it was damn cheap after all). Anyways, I browsed to PSFREEDOM.com to see the development of the raphael hack and to my surprise i found out two things...
a) This thread is hotlinkedvia this page http://psfreedom.com/wiki/Sony_Ericsson_XPERIA_X1, which is kinda cool I guess...
b) I found out (probably need to read my thread a little bit more ) that more recent hermes payloads are been released for xperia...
So, I will refresh any broken links, start again, and keep updated this first post agains the willings of our beloved sony
[Update#12] The true reason that I returned is that my fat PS3 pulled a YLOD on me and left me empty handed this holiday season, so I dusted off my jailbreaked one
Click to expand...
Click to collapse
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
ldghn said:
I did this process again and again but when ps3 start up nothing happened but top of screen this message appeare that the usb device was unknown
Click to expand...
Click to collapse
The same thing happened with me the first few tries, this message means that the process is not right, I solved this issue by re formatting xdandroid again and carefully placing and overrighting the files...
When you are 100% certain that the procedure is right (according to my walkthroug) then its only a matter o timing... keep trying mate.
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
ldghn said:
First time i run android use original the module and zImage file and then replace them with ps fredoom files or from first i use replaced files??
Click to expand...
Click to collapse
I think its very clear that you have to boot on android at least once with the original files....
(the initial install and calibration)
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
ldghn said:
I reinstall android 2 times and this time whne i connect device to ps3 no message about unknown device have been shown but ps3 dont show nothing ( manager.pkg) for install
I dont know what problem's.
Click to expand...
Click to collapse
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Jim P said:
So you finally done it!!
Under the GAME section on the XMB you should see a new item called "Install Package Files"
take a usb drive and put inside (root) the manager then insert it in the other free usb slot.
Press X at the "Install Package Files" and Install the manager...
Click to expand...
Click to collapse
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
ldghn said:
My problem is in step that you said
I connect usb drive with manager in but "Install Package Files" dont be apparent
Click to expand...
Click to collapse
Then you didn't do the exploit... back to the drawing board my friend
Thank You soo much! It works on first try
error
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
What I have gathered together in this walkthrough is what many people suggested and some other people including me found usefull and working.
You probably don't have the proper file arrangement in your SD card
and the actual command line is "cd sdcard" to access the sd card and thed "cd andboot" to access the "andboot" folder where the PS Freedom files reside.
hope I helped
trinolmf said:
so i managed to get android runnig via fatsal.
when i try to follow your terminal instructions it gives me back errors!
so i figured out actually the right comand is cd(space)/sdcard!!!!
but when i try to do the same with endboot it says no such folder!
so i tryed the next step the insmod psfredoom.ko it does something then i connect to my ps3 do the power trick and all but the most that i get on my ps3 is that "an unkwon device is connected" and nothing else! any suggestion?
Click to expand...
Click to collapse
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
hi mr i while insert cd andboot write in terminal can't cd to andboot and while connect to ps3 write an unknwon device is connected please help me thanks
teksound said:
hi all,i have the same problems,dont existing the folder"andboot" i creat it ?
thx
Click to expand...
Click to collapse
yeah. earlier I placed EVERYTHING in the root instead of making a folder called "andboot" so I'm going to do that again and see what I get. I think it's a bad psfreedom.ko file.
People...
When you installed xdandroid on your xperia the guy who made the port said that you have to create an andboot folder to place the android kernel inside...
so by default you have an andboot folder.
then its a matter of overiting 2 files there... simple as that.
Finally i did it
It works for me now
Perhaps i am stupid, but i cannot get it to work. This is how i do it:
Copy the android files to the sdcard and boot it in the phone with the haret.exe (takes a loooong time to boot). Reboot the phone back to WM, copy over the files module and zImage file, boot back into android with haret, startup terminal, write in the commands and so on. I start up the PS3 as instructed but i only get the message unknown USB and I cannot see any install pkg file.
I have tried and read all the instructions but I cannot understand what I am doing wrong, anyone have a tip?
helps needed
i have been trying make it work all day with no luck. mine is a uk version X1 with original rom. i followed instruction step by step and even reinstall the andriod port several times. however, still not working. always appear unknown usb device on ps3 screen. the only thing i didnt do is that flashing the SPL. is it a necessary step? what's the purpose for flashing the SPL?
actually, the module files from android and the one from psfreedom didn't have the same name... is this an issue ? witch name we have to keep ?
thx for the tuto !

[Q] Am I ****ed? ._.

Hello there, am I ****ed? Here's what happened today:
>Rooted LG revolution froze and crashed with a black screen, even after rebooting with taking the battery out.
>I'll just hard reset my phone.. nbd
>Hard reset phone
>Realized that it's still rooted, ****yea.jpg
>Go on an app deleting frenzy, accidentally deleted an app (sms.apk maybe?)
>Tried to press home and it doesn't work so I restart my phone and it boots normally until I unlock it. (The network bar is still visible but I can't access the home screen)
>Panic, then find this thread: http://forum.xda-developers.com/showthread.php?t=1337386 and complete every step but the phone doesn't show up on LGNPST. (I can't access the connectivity options, but it's usb debugged since the sd card and system folders show up on autorun)
What can I do? Is my phone salvageable? Or will I have to go to Verizon to fix my mess?
Thanks in advance!
If running Windows 7 try disabling UAC then re install the .dll file during the LGNPST setup.
I tried win 7 for a few days and couldn't get it to work. But my XP laptop worked fine. Try XP especially if win 7 is 64 bit.
--My REVO is Broken, tweaked, SC'd, and TB'd. Just awesome!
should be fairly simple
do u have cwm? and a back up? then load the system from a good backup, or load one... if no cwm then maybe the stock recovery will do it?
keep me informed and ill do what i can and search the thread http://forum.xda-developers.com/showthread.php?t=1564941
As a last resort you can allways pull the battery, then put it back in, then with the phone still off press power and down and hold untill you get option to factory reset, hit power for yes then reflash the .Tot you want and start over rooting.
pawdog said:
If running Windows 7 try disabling UAC then re install the .dll file during the LGNPST setup.
Click to expand...
Click to collapse
UAC has nothing to do with any issues.. type in start menu > search > type in "cmd" or "regedit" and right click and choose "run as administrator" then shouldn't have any issues registering the .dll

Categories

Resources