I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Just up, I really need help, I'm completely desperate... :|
You can put your device in bootloader mode?
eagleamon said:
I've just bought a HTC Charmer (T-mobile MDA Compact2). As I was looking for a french rom, I've read that the charmer was nearly the same (or exactly ?) pda as the Wizard. So As I've found a french rom for wizard, I tried to flash the charmer with it, thinking that if it was not good, it would reject the rom... Or, the flashing process has gone well till the 100% but now, the phone does not even want to light on.... :shock:
Do you think there's something possible to do ?? :?:
Thanks a lot for your help, I really need it !!!!
Click to expand...
Click to collapse
What symptoms do you have exactly? No led, no backlight, no text on the screen, no charging? What happens if you try to enter the bootloader?
Thanks for your interest.
In fact, after the flashing process, the phone switch off, and now, I cannot switch it on, if I put the usb cable, the pc does not detect anything, but the led ...
I let the beginnning but finally it starts !!!!
Yesterday, I disconnected the battery so as the secure one discharge also, and a few minutes ago, I put it on the 220V without hope and the led lighted ! and no it starts, but in German .. (I do not really understand this..)
So do you think that I should retry the french wizard rom ? Or this try cannot work ?
If this is the case, does someone know where I could find the English Charmer Rom (I do not find the T-mobile download page anymore) or better a french one
Thanks a lot in all case !!!
You flashed a charmer with a wizard ROM and it's working???
Well, i think that for you it's better to flash your device with a charmer ROM. On the ftp there is only a english ROM, not french.
No in fact it works again, but it's still in german ...
Could you please give me the link of the french rom ? I cannot find it...
Just a few more info...
So the phone works, in german, but there's someting really strange.. if I try to put it in bootlaoder mode, it's impossible, it switch off but do not swith on after, and not at all in fact, I have to get off the battery or put it on the charger so that it starts again...
And with the charger, after the boot, I can restart in bootloader mode, but at the second I unplug the charger, the phone switch off and it's not possible to restart witout the charger.....
Do you have an idea of what's happening ?? And how I could flash with an english rom ?? (doesn't work with the cradle USB cable..)
Thanks a lot !!
I think that the best thing to do is to flash the ROM with the WWE or German, as you like, you will find the ROMs on the Charmer section of the FTP.
Put your device in bootloader mode with the usb connected, then upgrade the ROM.
Indeed that would be the best solution but with the usb cable, it doesn't stay in bootloader mode, it switch off immediately ...
Do you know a reason of this behaviour ?
No one's got an idea .. ?
I'm still worry, so I do up
Just a last try
Is it possible that the bootlader has been changed and now dosen't work anymore ?
Related
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Jmavatar said:
Hello,
Iám Spanish and I just bought a MDA VARIO in GErmany, so I tried to install the spanish rom "2.18.7.8" and i did it. Everything was ok during installation, but when I restarted... The device couldn´t restart. It allway stop on the Qtek screen(with the sky), sometime it change the screen into a white(HTC innovations) one for a second. But it doesn´t work.
I made soft and hard reset, but nothing changes.
I also tried to install an other rom by bootloader way, but the rom sais that is not possible to contact with the phone device.
I´m scared and I don´t know what to do.
Know this is the rom´s I have on my Qtek 9100 :
IPL 1.06
SPL 1.06
OS 2.18.7.8
Help please!!
Click to expand...
Click to collapse
With activesync on it will say it won't detect the phone plugged in while it's in bootloader mode. Run the ROM update anyway.
Thanks, but it doesn´t work. The Rom software said that is unable to connect with the phone.
I just tried to install the vanilla WM6, and with zhis rom, the installation could begin, but at 95% it happen an error... and i need to reinstal an other time the vanilla WM6.
I tried an other time, but the same error on 95% :-( And i can´t instal others rom.
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
bbobeckyj said:
did you CID unlock?
enter bootloader and flash the original rom from that screen, then start again. if you don't know how to get into bootloader screen or what CID lock is, read the wiki and the stickies in the forum. Don't worry, it is not a brick
Click to expand...
Click to collapse
Thanks a lot for our support! I still tnhinking I have a brick :-S... Now It only apears the bootloather screen(three colors bars) due to the incompleted vanilla WM6 uppdate.
I think the CID is unlocked. I runed the Lokiwiz, but now, I am not sure if It worked... And now, the phone is without battery!!
Where I can find my original rom? The device is from T-Mobile and is a MDA VARIO. From Austria. I have 2 CD´s, one with windows 5 applications, and other with software... I can´t fin the rom.
Thanks a lot!!
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
bbobeckyj said:
there is a link to the US tmobile ROM in my signature. it may work, i don't know.
as for the dead battery, you have a few options,
1) charge the battery in a desktop charger such as this one from ebay.
2) try charging in a friend's wizard
3) i have read references to charging the battery with a n-i-n-e v-o-l-t battery and a p-a-p-e-r-c-l-i-p (i've typed it like that because there are getting more and More references to things than actual solutions when you search) battery many times, try googling this site for that (again in my sig).
the ROM is not on any CD they give out with it because they don't want people flashing their devices and ending up in the situation you are - why do you think they are locked.
Click to expand...
Click to collapse
Thanks a lot!! But it doesn´t work. Error[294] Invalid Vender ID :S
I can charge the battery with the normal charger to 220v.
Any idea??
My IPL is 1.06
and SPL 1.06
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
bbobeckyj said:
did you buy it from tmobile or ebay? (is it german tmobile or just bought in germany?)
go to the tmobile site and look for firmware/software updates for the mda vario. i don't know german so i could not find the mda vario on it
Click to expand...
Click to collapse
I bought yesterday on a T-mobile shop from Austria. I downloaded it´s roms... but the same problem.
I will carry the device to the shop...
Thanks a lot!!
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
bbobeckyj said:
try this button rom
http://rapidshare.com/files/18212239/CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe.html
then have you followed the intructions in Dr Ps thread
http://forum.xda-developers.com/showthread.php?t=285435
do not give up
Click to expand...
Click to collapse
Thanks again, but I returned the phone to the shop. Something didn´t work since the beginning. Tomorrow I will reveive a new one...
Thanks an other time!
Hi,
I got a similar problem.
I wanted to install the latest AkU 3.3 on my MDA VARIO but it stopped at 95%.
So I tried to install the oldest version available from T-Mobile Germany.
But now my device restarts again and again.
It says
IPL 1.06
SPL 1.03
OS 2.24.2.8.
and restarts.
Sometimes (with the oldest software version) I can calibrate my touchscreen and then the device installs the T-Mobile software. After that it restarts again and again.
I also tried softrest after the message: in 3 seconds .... software will be installed. Then it reboots and sometimes wm5 starts but is running VERY slow. I can't switch it off using the power buttom.
I unlocked my MDA Vario using Lokiwiz. No CID Unlock just Unlock.
What can I do?
Thanks in advance
very simple, flash back to your original rom, then, CID UNLOCK
I downloaded a wm6 upgrade pack from Demonoid. The instructions told me that I needed to load an older rom on before I could CID unlock. The ROM was: CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE. The ROM that was originally on my 9100 was the lastest from Qtek. My Qtek now will not move on from the splash screen. Does this sound like I have a dead pda? Anyone have any idea how to get out of this problem. Any advice or comments would be appreciated.
Thanks
PS: I turned it off for the time being. Now I can't even turn the dam thing on!
I think I may have found a solution if I can just turn it on!! Won't charge either!
Well if u can get it turned on hold the voice and cam buttons and get it into bootloader you'll be good
Was updating my dads SPV M700 to WM6 and have hit a problem ....
The rom image updated ok, and I used AX3L's 2.0.8.
Unfortunately during the GSM update the software crashed, and froze at 51%. I had to re-boot and now I can't use the phone.
When I re-set the phone it says No GSM at the HTC screen and then stops loading at the WM6 front page.
I can get into the Bootloader by pressing the Power/Camera/Reset buttons, but when I try to re-flash GSM is says error 270, corrupt image. I have tried several files with no luck.
I would appreciate a hand ..... My dad is going to kill me
Thanks
gaz_az
try press
power button + camera + reset
to enter usb mode
then reflash the radio again.
hope this works
You can try 2 other things!
Download the Radio ROM again- you may have had a downlaod glitch in the 1st one. V1.38 is the best one to try.
Download and install the offical HTC WM5 ROM- this should be a full ROM including Radio, so sometimes completes more effectively. If you are brave, you can them retry the WM6 flash!
since bricking a hermes i stopped taking chances doing rom upgrades via usb..
the method that is most reliable ad safe is... via SD card
extract RUU_signed file from the upgrade pack (use winrar) and then copy it to the root of a blank sd (mini or micro etc) and rename to TRINIMG.nbh ..enter bootloader and follow the steps.. its fast and most reliable
Ok - Thanks for the help, but no luck so far. I have tried the suggestions above !
Heres what I have done ...
Hard reset - no change
Tried to re-flash with WM6 and WM5 cooked roms, but an error comes up saying the images are corrupt. This happens with any image I try.
I have also tried a legit HTC WM5 rom upgrade image, but it doesn't work either. It gives an error at 1% saying invalid device ID.
What I can do it get into the standard bootloader screen, which shows I have a USB connection when plugged in. If I allow the phone to boot up it stops at the WM6.0 picture. It won't go far enough to allow me to get an activesync connection.
ANy more adivice would be greatly appreciated !
gaz_az
Next thing then, is to try and obtain a downloaded Orange M700 ROM- there are a few links hereabouts.
For some reason, your device seems to want only its home ROM. If that fails there are other methods before sending back to Orange!
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
well if you were my son, i would advice you,to buy a plane ticket for somewhere very far,leave the house while i sleep,and pray every day you have left in your life,for not find you on my way
uhm, question about boot loader and flash on boot loader mode.
I copy file TRINIMG.nbh to root card mini SD, and i can't go as you say...
always Tri colors screen....
gaz_az said:
I downloaded an Orange rom, but still no luck. It gets to 1% again, then says there is a error/corrupt image file. Same as any of other cooked images !
What next ??
Click to expand...
Click to collapse
You are running out of options
Your choices now are to go further down the 'fiddling' route, or give up and return the phone to Orange for repair. At least if its is stuck in bootloader, they may not spot that you have been meddling
If you want to play more, there are very few Trinity specific fixes, but possibly some of the questions/answers in the Hermes WiKi may help, though the Bootloader versions etc won't be relevant.
[Edit: When you are in Bootloader mode, what version numbers are showing on the screen?]
is it so wrong i was smiling when i read this.
does make me wonder if u told ur dad what u were going to do or whether u were trying to be cocky by giving him a better phone without him knowing.
all i can say is, UNLUCKY !
I must say things are looking bad - I think it would take an original orange SPV rom if I could get one. Been to the orange website, but no luck !! Anyone know if orange released one ??
Been looking at the Hermes unbrick thread. Is there a way to enter KITL debug mode in the trinity ??
G
P.S. Dad knew I was upgrading the phone, already did it once for him and it went ok. No sure he knew I could acutually kill it
No Orange haven't released an official rom.
Well Orange UK haven't Orange FR have, so unless he speaks and reads french that's not an option.
Well, French or not, you've probably got nothing to lose by trying to load the official French ROM
Go Here and click the Mise-a-jour link (which is French for ROM) and it will open a zip file download without the need to verify the IMEI number.
If that doesn't work, nothing will! If it does load, you will at least have a working phone, even if it is in French, and you can go back over the ROM update again, remembering to apply the SPL Bootloader first!
Still "not allow", i don't know what the hell Orange was doing with P3600?
Lock everything?........it's suck !!!
No luck with the French ROM. Same thing gives an error message about wrong device ID.
I am one step from chucking it in the bin. Any more last minute ideas ??
erh, bizzard,i can't use "wtty.exe" to view my CID ...
i tape "info 2"and it always appear
Cmd>info 2
CID: Wait interpreter timeout
HTCSF kEØ(HTCE
Cmd>
...............................
Someone have issue for that?
If i can view CID code,i think i can find the right ROM to re-vivre...all suck !!!
erh, hey guy, your boot loader is english or french? sorry if it's the most stupid question of the day......i think french device use french boot loader,right?
i mean, when screen tri-color appear, use mini SD card to flash ROM, the language it apprear itself is english or french.
p/s : i was telephone to the HTC center, and they say as usual, send it to the center repair.
For french user address is : be sure u have enough garanty which required.
send them and make them crazy.....
CIRMA ELECTRONIQUE
9A14 CHEMIN DE BARATEAU
ZONE INDUSTRIEL DE LA LANDE
33451 SAINT Loubès
If you can figure out how to compile splxploit, you can fix this, see
http://forum.xda-developers.com/showthread.php?t=308691
thank anyway,i will try it before tomorrow,cause i will send them my device for repair.
Hello guys, let's make it short... suddenly the display of my Diamond become black and there's nothing I can do to make it on again... I tried everything: reset, remove battery... nothing! :-(
The telephone works, in fact I can receive calls and so... and it even connects through activesync. So it's a display problem for sure! :-((
Now my BIG question: I have to put it back H3G ITA original ROM (first step), that I've found on an italian forum and the original SPL that I've found here (second step), to bring the Diamond to repair.
For the ROM no probs I suppose... I'll go thru Activesync and flash it as usual, but THEN??? I won't be able to use activesync again to flash the spl, since I won't be able to set the initial configuration! :-(
Can you help me? Some ideas??? Thanks in advance!
mmm... what if someone tells me the right steps after a flash upgrade and i try to touch the screen at my best for the initial configuration???
then i could connect to activesync again maybe....
pleaaaaaaaaaaaaaaaseeeee...... give me some ideas!!! :-(((
What a shame...
i was hoping someone has an nice answer
i have exactly the same problem since yesterday - so dont worry you are not alone
you dont need to use activesync to flash
enter bootloader mode and you can connect via USB
Hi There
plz help me
while upgrading Kjam MY PC restarted
and now My Kjam started Automatically on boot loader no HTC Or Imate Screen
and No Hard reset
Download and flash official k-jam stock rom to recover back to its default status than proceed further.
I has the same problem
sometime ago i had the same issue my F#$kn PC restars and my phone goes directly to vbootloader and it was caused cause i have flash my device with the miniSD in it... but is not prooved some people said that it is not the trouble.... what ever
when you recover your XP just plug your device to the PC via usb in bootloaders mode... unplug your miniSD and if you want.... your SIM card (it doesnt matter at all) and reflash.
if it doesnt works try the method described in my Signature link... Trying MTTY to revives a wizard everywhere stucks!!
But... is recomended do first a reflash in bootloaders... then if not works contact me to guide you trough the steps on MTTY...
Good luck
(OH! be sure that dont use too much your device in bootloaders cause the batt dont charge in this mode and we need more than 70% to reflash)
by the way... is G3 or G4? what info do you have?
zabardast_1 Thanks For Ur Reply
+ Que PPC
My Kjam dosen't Turn on now i will try to reCharge it and i hope ur replay help
My Phone is G4
and plz tell me any thing May help me ..
ThanX Alot
Is your batt
Your batt is dead...
I told you... dont use it cause in bootloaders dont charge....
So try to get an only batt wall charger... or find another wizard to recharge your batt... or get one with at least 70% of charge.
mmm I dont know a lot of G4 devices but maybe you need to reinstall an official Rom like zabardast said but i dont know if its needed to remove the hard SPL ask zabardast maybe he knows.