Error 100 Model ID error - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I had updated my qtek 9090 to WM5 Mamaich's, I was trying to update to TuMa 1.3 and when trying to flash I get the message Error 100 Model ID error.
Should I have the original devicedata.txt before the fisrt flash? what is wrong?

b
Try to use maUpgradeNoId.exe

Re: b
borjok536 said:
Try to use maUpgradeNoId.exe
Click to expand...
Click to collapse
Hi i have the same problem, so where can i download the maUpgradeNoId.exe?? thanks

c
visit BlueAngel wiki page..
ftp://xda:[email protected]/BlueAngel/Tools/MaUpgradeUt_noID.zip

Thanks... how do I use it? just run the file?

Done
Thnak you all. it's done and it's mutch more quick this room

Yup
Use it instead of BaUpgradeUT.exe

Make sure you adjust PH20B vs PH20B1. I had the same issue - After changing to PH20B1 it worked

How did you make that adjustment
cmairhof said:
Make sure you adjust PH20B vs PH20B1. I had the same issue - After changing to PH20B1 it worked
Click to expand...
Click to collapse
Adjust what? is this some procedure similar to changing ur operator code?
Would you please eleborate? and, if you successfully got to install through BAUpgradeUT.exe by doing what you have said, would you please share the procedure?
We would really appreciate it. Thankx
Yaantra

Related

ba_dpodcht_12406_110_10600

hello
I already download http://www.gsmcable.net/ppc/ba_dpodcht_12406_110_10600_ship.exe and get 3 nbf file,i need upgrade my WWE to it, but i don't know how can get rom passowrd.
have somebody can help? big thanks
It seems that format of NBF files has changed in this upgrade. Old utilities no longer work.
hey did anyone try this update how is it!
what are the differneces in this rom pls can anyone specify the details
thanks in advance
jeet said:
hey did anyone try this update how is it!
what are the differneces in this rom pls can anyone specify the details
thanks in advance
Click to expand...
Click to collapse
This version is still not stable yet in terms of BT. You should upgrade to 1.31.06cht
Is this a Rom update from someone else,and who? Also , where is 1.31.06? Thanks .
chialiu said:
jeet said:
hey did anyone try this update how is it!
what are the differneces in this rom pls can anyone specify the details
thanks in advance
Click to expand...
Click to collapse
This version is still not stable yet in terms of BT. You should upgrade to 1.31.06cht
Click to expand...
Click to collapse
I download your rom and try to upgrade to my i-mate PDA2K but got the error message error 123 radio image file checksum error.
Would like to update wiki with this rom!
I fell it is a CHT but who's is it ? Dopod ?
You can get the 1.31 of wiki
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
I already try 1.14.130 CHT but can't extract file came error
I will decrypt it later.
Hi
Any one know how to change Lang Chinese to English ?
gsmcable
I am looking for a link to the dopod 1.31 rom CHT for wiki
Some &/(=& Deleted all the dopod roms of our ftp site.
I cant read the dopod.com site and cant find anything if I change the language to english.
Can you help?
Oh yes and the reupload of the 1.31 on our ftp site is corupt
I can help for Chinese let me know what you need or email to me,I will back to Taiwan by Apr.9 will buy Dopod 700 ,I get to get ROM from Dopod web site but neex to be a member,wait for me.
success upgrade from Qtek9090
old: PH20B 0 B FRE E DANGA203 1.22.02 0 2 1.22.127 1.06.00 06.00
now: cht_12406_110_10600
It's woking well
ROM suitable for Blueangle?
Hi all,
Is the dopod ROM suitable for BA? Sorry, I couldn't get the whole picture. Is it a WM2005 ROM?
Many thanks!
get here http://forum.xda-developers.com/viewtopic.php?t=19371&highlight=
this is better ROM , you also need to upgrade 1.13 radius that will better use,

Testing New tool BA Rom Editor

Hi I am testing the new BA Rom ediitor tool and need some help with a few issues.
1) Can you all have a look at the wiki list of shipped roms and post which type they are.
A Type I rom is a rom that worked with the old xda3nbftool.exe tool
A Type II is a rom that cames up with a wrong header message when using the xda3nbftool.exe tool
The link is
http://wiki.xda-developers.com/index.php?pagename=BA_Upgrades
The format is:
I-Mate WWE 1.22.00 1.22.162 1.06.00 Type X
2) I am now flashing the
WWE Versions With Arabic Customizing
I-Mate WWE 1.31.00 1.31.122 1.06.00 Type I
After I flash this rom it asks me to setup the carrier, I have tried 2 and get on both a IMAGNET .... Was not installed sucessfully message
Is this normal for that rom when installed using the old tool? As in who can remember what happened on with that rom?
Updated wiki, added a new column called : Type (xda3nbftool).
I have filled in the ones I played with, the rest, I don't know, although I suspect the QTEK 9090 1.69 ROM is type 2...
Cheers,
HG
Thats interesting. Where can i find this tool?
Bubisch said:
Thats interesting. Where can i find this tool?
Click to expand...
Click to collapse
Read his post...!
He is testing the tool, so not releasing it...
And he is asking for help, so why not contribute (give) instead of wanting to have (get)...
Sorry for my tone, but it seems that everybody wants to always get, get, get, not willing to put in some effort once in a while...
hi, i couldn't find the newest German upgrade from T-mobile in die wiki, so i just post the link here...
http://www.t-mobile.de/downloads/mda/ba_tmde_12201_182_10600_ship_special.exe
this is a Type II rom
i hope i could help
basti
Thanks
Is this a german or austrian rom?
Is it for the MDAIII with camera as well as without camera?
I am downloding now to post to wiki
Ww have that rom on wiki so you can forget the above questions
Has nobody installed the arbic 1.31 rom,
Please answer my question in first post.
Yeah, happy goat, youre right! Always taking and never giving was all i kept in my mind while i spend my hole day working on a translation of the wiki for a german ERK. Sorry for that...
Bubisch, don't take my comments personal...I was merely letting off steam.
Can you ever forgive me?
Nice sig by the way!
So geil!
nice work Bubisch!
Moving on, and thanks for all the info about the type II roms which I must have missed.
Ok lets try another approach.
The new tool allowes you to create a ms_.nbf (That the Extended Rom) out of a list of cabs, the config.txt and Autorun.exe.
You can open both a type I and type II exteneded Rom,
export the files and import the ones that you want.
This you can save as a Type I nbf and run the upgrade to flash your device.
This is were you could help or is it I could help you, either way I don't mind.
I need.
A rar or zip file of the content that you would like to have in your exteneded rom.
I will not check to see if this makes sense nor will I check to see if the cabs are mission imposible or need input.
I will create a ms_.nbf with your opperator ID in the header.
I will add 2 splash screens of your choice that have been saved by you in bmp format.
I will upload this file and the needed install files to the ftp site for you to flash.
I have tested this with the files out of
http://wiki.xda-developers.com/index.php?pagename=BA_ERK_Applications
On a Shipped GER MDA III in WWE and it works fine
Recap:
1) Post Link to your files
2) 2 Splash screens in bmp
3) Your operator code. Model NR
HappyGoat said:
Bubisch, don't take my comments personal...I was merely letting off steam.
Can you ever forgive me?
Click to expand...
Click to collapse
Forgiven!
HappyGoat said:
Nice sig by the way!
Click to expand...
Click to collapse
Yeah, thought it would help spreading around the word... this ok for you?
Ofcourse it is...It was actually MDAIIIuser who started it...great idea and easier to reply to people...just refer them to link in sig...
thx for all your efforts MDAIIIuser , but I'm not sure whether I understand correctly your last post, and I'm not very familiar with extended roms either...
Actually it would be best if i could just flash the new updates vom the german t-mobile page... i'm thankful for every tip.
PS:
evtl kanns mir kurz wer auch auf deutsch schreiben... wäre super hilfreich
thx in advance
basti
Hey Basti. Still not able to upgrade to German Version?
MDAIIIUser, can your tool solve this problem?
Yes (Ja)
I have not been able to test the T-mobile Ger Type II roms as this is my device and operator (the ship.exe will always work for me).
So pick a rom, post the version as well clear text of devicedata.txt. I will make a custom ship.exe and pm the link
i would like to have this software on my mdaIII
http://www.t-mobile.de/downloads/mda_i-iii/ba_tmde_12201_182_10600_ship_special.exe
Its a TypeII , and my devicedata.txt is here:
http://basti.admin-world.de/DeviceData.txt
thx in advance
basti
Basti[08/15]
Thanks for wanting to test a UNTESTED ROM.
Check your pm for link of your custom ship.exe made by new tool.
Download, unrar, connect device, check that activesync is up,
run BaUpgradeUt.exe as is (no fix no nothing).
Check to see if all works
Then Del the Ms and nk nbf
copy the Radio.Nbf from the Radio 1.12 folder into update folder
Rerun BaUpgradeUt.exe
Check to see if all works
Please post your results
thx 4 your help, but before i start.... which update folder do you mean?
thx
basti

Problem while changing ROM on K-Jam

I recently bought myself a K-Jam with norweigan language. I would like to have english language on mine, since most of the applications I'm using is in english, bu I'm having a problem installing a WWE ROM.
It doesn¨t matter witch ROM I try..I always get the error message:
ERROR [294] : INVALID VENDER ID
...from the RUU.
Kan anyone help me get around this please, means alot. I'm stuck!
Do a search for lokiwiz.
bolasz said:
Do a search for lokiwiz.
Click to expand...
Click to collapse
Thank you so very much
Happy Owner of WWE Wizard
how to upgrade to WWE?
Guys,
to upgrade my qtek 9100 withe the WWE I just need to syncronize and run the K-JAM_WWE_1010903_106_10110_ship.exe?
I don't want to go wrong with the execution steps, somewhere where I can find them?
Thanks a lot,
Albemax
In this link you'll find all you need to know
http://forum.xda-developers.com/viewtopic.php?t=33796
If you have any problems just let me know.
Feel free to try mailing me at [email protected].
J.

QTEK 9100 Upgrade ROM for English Version

I would appreciate if someone could help me.
I am very confused about upgrading ROm on QTEK 9100.
I Bought a QTEK 9100 in USA, it comes with the following ENGLISH version of software
ROM Version: 1.1.7.5
ROM date: 09/22/05
Radio Version: 01.01.10
Protocol Version: 4.0.13.16
Ext ROM Version: 1.1.7.105
I have red a lot about auopgrading, but finally I don´t Know wich is the right ROM for my device, I have found the following link for upgrading the ROM
1. http://www.mywindowsmobile.dk/page.php? … p;recid=41
2. ftp://ftp.xda-developers.com/universal.........
I appreciate any help response
Andres
You can use the information from this forum to upgrade your phone:
http://forum.xda-developers.com/viewtopic.php?t=44022
This is a Qtek official upgrade so you just need to run the installer and you'll be done with it without much hassle. I personally prefer i-mate's KJAM ROM since it is newer and in my opinion it runs a bit faster. To have i-mate's ROM in your Qtek, you have to do CID unlock (using Lokiwiz). Search the forum for this info.
I had a Qtek 9100 before.. it has a dead bluetooth hardware. Now, if you know where I can get this thing serviced I would appreciate it. Anyway, in place of my Qtek 9100, I purchased Cingular 8125, CID unlocked it.. and run i-mate KJAM's 2.17 WWE Rom.
Thanks for your replay
Why do I have to make a CID unlocked, because I bought Unlocked, it means I can use it with any GSM Company.
When you made a ROM upgrade, you are also upgrading at the same time Radio Version, Protocol Version and Ext ROM Version.
Andres
just not to start a new topic.
Where can I download drivers for Qtek 9100?
You don't need drivers, just download and install Activesync 4.1 after that plug in your USB cable and the device gets recognized.
I also thought so, but failed.
hi guys
where i can find Qtek english last Rom version? please help me
thank you
Go to the ftp site ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/
The latest WWE ROM is RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe as far as I am aware
Hello
I tried to click on the ftp link to download the ROM Upgrade. I get an error message 530 that the server doesn't allow anonymous logins.
But I am logged in as Rudolf...
Something wrong ?
Rudolf said:
Hello
I tried to click on the ftp link to download the ROM Upgrade. I get an error message 530 that the server doesn't allow anonymous logins.
But I am logged in as Rudolf...
Something wrong ?
Click to expand...
Click to collapse
Use u/p: xda/xda instead.
bolasz said:
Rudolf said:
Hello
I tried to click on the ftp link to download the ROM Upgrade. I get an error message 530 that the server doesn't allow anonymous logins.
But I am logged in as Rudolf...
Something wrong ?
Click to expand...
Click to collapse
Use u/p: xda/xda instead.
Click to expand...
Click to collapse
Sorry, but that is not clear to me. Could you be more specific. I am lost in these abbreviations...
Thank you
Rudolf
Use this link:
ftp://xda:[email protected]/Wizard/Roms/Qtek/
bambacik said:
Use this link:
ftp://xda:[email protected]/Wizard/Roms/Qtek/
Click to expand...
Click to collapse
Thank you, it works fine...
Rudolf
thanks a lot
this is link working
bambacik said:
Use this link:
ftp://xda:[email protected]/Wizard/Roms/Qtek/
Click to expand...
Click to collapse
hi guys
please tell me wich no ID need to use for QTEK. tell me. wich
1. Wizard_RomUpgradeUtility_noID
2. MaUpgradeUt_noID
wich is working for Qtek
thanks a lot
hi guys
please help me. i can't update my QTEK. i'm using
Wizard_RomUpgradeUtility_noID
but allways say error. wich noID soft need to use. thanks a lot
hi guys
please help me. i can't update my QTEK 9100.
http://forum.xda-developers.com/vie...0&postorder=asc&highlight=ipaq+hp+6315+unlock
hi guys
please help me. i can't update my Qtek 9100. connect to soft allways say: error you soft. please cheack again say. wich tool need ti use update
thanks a lot
hi guys
please help me to update my Qtek 9100
soft allways say: error in you soft.
hepl me
thanks
JoninLA said:
Go to the ftp site ftp://ftp.xda-developers.com/Wizard/Roms/Qtek/
The latest WWE ROM is RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe as far as I am aware
Click to expand...
Click to collapse
Whenever I go to this link it says "Windows cannot access this folder. Make sure you typed the file name correctly and that you have permission to access the folder.
Details:
220 Welcome to FTP service
530 This FTP server does not allow anonymous logins.
I try over and over i dont get it and when you say login with xda user and pass theres no option to login when I click the link.

Custom RUU Updater

OK, I've finalised an RUU Updater with inclusive tools to allow you to Bake your own ROMs from the ones already out there
this does NOT mean you can edit the OS files, simply mix'n'match
The RUU Updater also will run the SSPL for you meaning that you can use this RUU to flash *ANY* ROM to your PDA even if it is fresh out of the box (but please do take care when doing so)
There is no NBH included in this file, and you will need to place one in the directory you extract this to in order to run it.
I have released in this package; a GUI app to simplify the ROM baking process, but if you wish, feel free to experiment, and remember, you *CAN* delete components from the NBHGen sample file (say for example you didn't want to flash a new Radio), but please remember to ensure that all files are named correctly.
Download: (UPDATED VERSION, INCLUDES AUTOMATED GUI TOOL)
ftp://xda:[email protected]/Trinity/Tools_and_Programs/ModifiedRUUUpdater-V2-TRIN.rar
Please note that the GUI tool is relatively primitive; please keep all files INSIDE the workshop folder, thanks
Credit:
- Credit to Pof et al. for NBHextract
- Credit to Bot for NBHGen
- Credit to Des for SSPL
- Credit to me for some rubbishy fiddling around
Combining OS & Radio from different ROMS
Hi there,
Will this tool able to merge OS and Radio components from different official ROMS?
Example... we take the OS ROm from the original Dopod WWE ROM and combine it with the GPS Enabled Radio on the recent Dopod official GPS ROM?
I thought just wan to try if this can solve the current Audio no BASS issues.. after romming with the latest GPS ROM.
Yep, that's exactly what it'll let you do.
Whether your GPS will still work with a GPS Radio and non-GPS ROM I cannot answer however (but either way, you can easily flash back)
Sweet!!!!
Thank alot, this will help alot!!
Invalid Model ID
Hi There,
I'm Trying to create the following combination for a ROM
RUU_Trinity_DOPODASIA_WWE_1.17.707.3_6275_1.24.00.11_107_Ship
00_IPL.nb
01_SPL.nb
02_MainSplash.bmp
02_MainSplash.nb
03_SubSplash.bmp
03_SubSplash.nb
04_ExtROM.nb
06_OS.nb
RUU_Trinity_DOPODASIA_WWE_1.23.707.6_6275_1.35.00.11_108_Ship
05_GSM.nb
I got error saying: "ERROR [244] : Invalid Model ID"
Please advice how to get around this Invalid Model ID issue?
Regards
fychan said:
Hi There,
I got error saying: "ERROR [244] : Invalid Model ID"
Please advice how to get around this Invalid Model ID issue?
Regards
Click to expand...
Click to collapse
Sorry, this is my mistake, I will recompile ROMBaker; it is creating the NBH as HERM100 instead of TRIN100 - I'll have a fix for this in about 5 minutes
Ok, I have updated ROMBaker; you may redownload the entire archive from the FTP or download this attachment and overwrite the old ROMBaker.
if there is anyone who has both a TRIN and HERM, then I will consider creating a single program that will allow you to choose between both.
Question:i ve got an italian Tim branded 3600 with no gps ,can i just update the radio with a radio gps-enabled file taken from another rom to enable it with this tool??i like to have gps but also like my P3600 in my language...
Thanks in advance,Base
if anyone can make an Italian Branded or unbranded ROM with GPS OK please share it
Or anyone can post a backup of one of this rom without GPS and i will try to edit it.
humm...is it possible to get your language out to use with a WWE ROM ,or the whole original rom as a backup and install it later if needed ??
The ftp link doesn't work!!! Could you please uploaded again?
Thanks!!!
some little sod cleared the Uploads folder... re-uploaded now anyway
I moved it to ftp safe heaven, so it doesn't happen again.
Thanks Man, You are the best!
need a little help
i've try to combine these ROMs
Code:
TRIN100
SuperCID
ROMBaker
XDADevelopers
100,00_IPL.nb
200,01_SPL.nb
600,02_MainSplash.nb
601,03_SubSplash.nb
900,04_ExtROM.nb
300,05_GSM.nb
400,06_Unknown.nb
05_GSM.nb is actually 1.50.08.11 (taken from taiwanese ROM) while the os rom is taken from the official htc rom.
the problem is, once i finish flshing my device, the device information (inside wm6) still showing that i'm running 1.46.00.11 (the original gsm from the official ROM)
is it normal? if not, how to change it (so that it will display 1.50.08.11) ?
Well I would like to try this but the ftp isnt working . can someone please upload it somewhere so I can grab it ... MAny thanks....
bad hardware
hi
I've a italian version of htc 3600
i've downloaded the rom version
1.23.408
date 03/13/07
radio version 1.38.00.11
extr.1.23.408.103
but the software its' the same the gps had no function!!
maybe i've a 3600 without a gps integrated device?
can anybody help me ??
thanks
alex
alexj10 said:
hi
I've a italian version of htc 3600
i've downloaded the rom version
1.23.408
date 03/13/07
radio version 1.38.00.11
extr.1.23.408.103
but the software its' the same the gps had no function!!
maybe i've a 3600 without a gps integrated device?
can anybody help me ??
thanks
alex
Click to expand...
Click to collapse
Share you rom others have been looking for it .
heyas ppl with this process can i upgrade from WM5 to WM6, the Des SSPL works to this kind of upgrade?!?! tks
sorry my english
zoko said:
heyas ppl with this process can i upgrade from WM5 to WM6, the Des SSPL works to this kind of upgrade?!?! tks
sorry my english
Click to expand...
Click to collapse
If the rom you using has wm6 then yes and if your device is HardSPL ...

Categories

Resources