Certificate for ieee 802.1x network access control - MDA III, XDA III, PDA2k, 9090 Software Upgrading

I am trying to connect my blueangel wm5 to my university wifi and I need to be able do install a personal certificate. I wasn't able to find any thread discussing how to do this. If it is possible at all with blue angel.
Thank you for any help.

Check out http://www.jacco2.dds.nl/networking/p12imprt.html
It explains it all pretty thoroughly and has a download link for a utility which permits import of certificates

Related

Setting up a VPN on T-mobile UK

I remember while back in the Hermes forum there was talk about the fact that data traffic on t-mobile goes through it's proxy, meaning several things don't work that well.
E.g. Pictures are compressed, VOIP (Skype) cuts out etc.
I also remember people saying that you could set up a proxy server on your home network and then route your traffic through it, effectively tunneling all your traffic through a link that would then bypass the t-mobile proxy.
I've tried searching for details on how to get a setup like this working, in vain. So my questions are:
1) Do I have to set up the VPN on my "work" connection (I think I do, just want to confirm)?
2) What settings on my 3g/HSDPA connection do I need to change (I think there's a special t-mobile proxy server you have to use, rather than the standard one)?
3) Does anyone have experience with VPNs in terms of which ports to forward from a router --> the VPN server.
4) I have a choice between using my main desktop (Vista) and a Ubuntu box (Feisty atm), would one be better than the other to use?
Any other comments/experiences/solutions would be greatly appreciated.
bump.........

Need Help with VPN - Pretty Please!

Hey guys and girls,
I am am about to give up on my search for a working, cisco compatible, VPN client for Windows Mobile 6 on my Kaiser.
After some research I found out that one of the following clients should work with Cisco networks: MovianVPN, BluefireVPN and AnthaVPN.
Got myself a copy of each software, but none works.
MovianVPN v4.01 - most promissing, cause Cisco profiles can be directly importet. but it seems to be only for WinMo2003. Installations works without problems, but afterwards you can't start the client.
BluefireVPN v2.1.1 - installation doesn't even work
AnthaVPN v7.5 - installation without problems, client runs without problems, but: after installation the Kaiser can't establish a w-lan connetion anymore (not at all! even when Antha isn't running) Antha installs an own weird w-lan driver, which seems to mess things up
Please! I am close to madness. There must be someone out there wo knows a way how to connect to Cisco VPN with the Kaiser!
Thanks for any helpfull answer in advance!
regards,
cartonneexpress
NCP Secure
Hi,
I have used NCP secure to connect to a cisco VPN, here are a few links:
Compatability List: http://english.cyprotect.com/main0182.php(check for kaiser, it's mentioned somewhere)
NCP Secure Link: http://www.ncp.de/en.html
Hope this helps...
AnthaVPN support - nice try... but, ...nope
AnthaVPN support just sent me the following:
>>
Check this option from a forum:
After installing anthaVPN and change the registry entro from "2" -> "1" WIFI works correct.
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
<<
I looked at the registry, but had to find out that this entry was already set to "1" at my device.
it sounded so promising...
NCP Security Client...
Hey Reaper,
thanks for the advice! Installation of NCP was no problem. Everything seems to work fine afterwards.
But I have some trouble converting my Cisco profiles to NCP. NCP doesn't accept /convert the Cisco profiles (.pcf). I tried to create a new NCP profile with the information I got out of the Cisco ones. This is all the information that was in there:
Host
GroupName
GroupPWD
(after connection Cisco asks me for my personal login name and pwd)
I tried to bring these informations into a NCP profile, but it didn't work. Can you tell me how I must create the NCP profile?
Thanks,
cartonneexpress
By the way, I'm still open for other suggestions! Especially how to get MovianVPN working. Cause I could use the existing .pcf profile with it! Isn't there a coder out there who knows how to get a WinMo2003 programm running on 6.1?

OpenVPN-Server -> Cyanogen Mod

Hey Guys,
in germany we just connect (3G) behind T-Mobile NAT. I want to have a fix ip address with dyndns. Behind a NAT this is not possible. Can anybody help me to solve this problem.
is there a possibility to configure a openvpn-server on cyanogen. Have anybody already make this?
In the cyanogen mod 4.1.999 there were following programs: dropbear, openssl and openvpn or were these programs for client mode configuration?
I couldn't find anything for a server mode. I found a openvpn-monitor.apk which doensn't hava a function.
Thanks for help!
You can use dyndns.org to map your current IP to a domain. If your Router supports it, it can do this automatically. If not, you have to manually run an app.
nschargitz said:
In the cyanogen mod 4.1.999 there were following programs: dropbear, openssl and openvpn or were these programs for client mode configuration?
I couldn't find anything for a server mode. I found a openvpn-monitor.apk which doensn't hava a function.
Click to expand...
Click to collapse
No, only the client binaries are included. If you need a server version for your handset you will need to either compile it yourself or find someone who has done the work for you. But as far as I know there are no ROMs that include those server binaries (except for maybe a copy of sshd).
traspler said:
You can use dyndns.org to map your current IP to a domain. If your Router supports it, it can do this automatically. If not, you have to manually run an app.
Click to expand...
Click to collapse
I guess the router doing the NAT is not located in his living room but in some server room operated by T-Mobile, so port forwarding or something like that is not an option.
I have the same problem at the moment, T-Mobile assigns me a private IP like 10.0.3.21 which cannot be accessed from the internet even with DynDNS or something like that.
If I come to a conlusion that to try to make my SSH accessible from the internet, I will post it, of course.
Hello,
thanks for reply! But i dont wont access my g1 over a home network. When i want to do this, i connect via telnet or something else. Because my router give me a static IP or a static DHCP IP.
I want to access to my g1 over umts (mobile). I have tried to access my g1 with an dyndns app in the market. In the descriptions of the app was a info that says, in germany with t-mobile contract it doesn´t works.
Have anybode compiled a openvpn-server app?
Thanks!
openvpn has just one program for its peer-to-peer, client, and server modes. There is no separate server.

[Q] HTC TD2 & WPA Enterprise EAP PEAP MSchapV2

is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked
Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.
ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work
well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...
Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...
sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...
Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?
unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback
ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.
@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.

[Q] Proxy for W8/X8 or Android OS itself

Hi Guys
Iam wondering why there is no relevant info anywhere on this forum about Wireless enterprise configuration.
i know we can select add wifi network and select 802.11 and manually configure the enterprise configuration it gets connected to enterprise infratructure, but can anybody tell me how to enter the automatic configuration script file to android or x8 to let the phone know that it has to go through this PAC automatic configuration file in order to access internet.
Intranet no problem it works fine, but for internet we need to have this automatic configuration Proxy url which looks like some url sitename to access internet
kindly anyone let me know how to do it
i have tried all the solutions but no use
asproxy,
transproxy
froyo proxy settings nothing works
awaiting for the high tech technical answer from developers
Regards
Profxv
Hi
Anyone please answer my query
Kindly answer my query anyone please.........
Anyone please listen to my query and answer me
can somebody answer my query ?

Categories

Resources