Database Develop

Certificate for ieee 802.1x network access control

I am trying to connect my blueangel wm5 to my university wifi and I need to be able do install a personal certificate. I wasn't able to find any thread discussing how to do this. If it is possible at all with blue angel.
Thank you for any help.

Check out http://www.jacco2.dds.nl/networking/p12imprt.html
It explains it all pretty thoroughly and has a download link for a utility which permits import of certificates

Need Help with VPN - Pretty Please!

Hey guys and girls,
I am am about to give up on my search for a working, cisco compatible, VPN client for Windows Mobile 6 on my Kaiser.
After some research I found out that one of the following clients should work with Cisco networks: MovianVPN, BluefireVPN and AnthaVPN.
Got myself a copy of each software, but none works.
MovianVPN v4.01 - most promissing, cause Cisco profiles can be directly importet. but it seems to be only for WinMo2003. Installations works without problems, but afterwards you can't start the client.
BluefireVPN v2.1.1 - installation doesn't even work
AnthaVPN v7.5 - installation without problems, client runs without problems, but: after installation the Kaiser can't establish a w-lan connetion anymore (not at all! even when Antha isn't running) Antha installs an own weird w-lan driver, which seems to mess things up
Please! I am close to madness. There must be someone out there wo knows a way how to connect to Cisco VPN with the Kaiser!
Thanks for any helpfull answer in advance!
regards,
cartonneexpress

NCP Secure
Hi,
I have used NCP secure to connect to a cisco VPN, here are a few links:
Compatability List: http://english.cyprotect.com/main0182.php(check for kaiser, it's mentioned somewhere)
NCP Secure Link: http://www.ncp.de/en.html
Hope this helps...

AnthaVPN support - nice try... but, ...nope
AnthaVPN support just sent me the following:
>>
Check this option from a forum:
After installing anthaVPN and change the registry entro from "2" -> "1" WIFI works correct.
HKLM\Comm\TNETW12511\Parms\HTCPowermode=1
<<
I looked at the registry, but had to find out that this entry was already set to "1" at my device.
it sounded so promising...

NCP Security Client...
Hey Reaper,
thanks for the advice! Installation of NCP was no problem. Everything seems to work fine afterwards.
But I have some trouble converting my Cisco profiles to NCP. NCP doesn't accept /convert the Cisco profiles (.pcf). I tried to create a new NCP profile with the information I got out of the Cisco ones. This is all the information that was in there:
Host
GroupName
GroupPWD
(after connection Cisco asks me for my personal login name and pwd)
I tried to bring these informations into a NCP profile, but it didn't work. Can you tell me how I must create the NCP profile?
Thanks,
cartonneexpress
By the way, I'm still open for other suggestions! Especially how to get MovianVPN working. Cause I could use the existing .pcf profile with it! Isn't there a coder out there who knows how to get a WinMo2003 programm running on 6.1?

WiFi Proxy Setting on Galaxy S

Hi All
My Device: Samsun Galaxy S
I have WiFi network in the work and they use proxy that requires authentication (username/pass). Any hints on how to do this?. because I did not find where i can put my (username/pass).
I am realy Sad . Please android developers help us As Soon As Possible.

I'm also wondering this. Im going to continue searching, if i find any more info, ill reply to this thread.

Not sure if you have already resolved this but
Settings> Wireless & networks> wifi settings> settings button > advanced> proxy

sventen said:
Not sure if you have already resolved this but
Settings> Wireless & networks> wifi settings> settings button > advanced> proxy
Click to expand...
Click to collapse
Yea i found those settings. I was hoping 2.2 would have proxy settings for each wifi network.

i have internet in the work... i can use the proxy for wifi sice it did not ask for password and username... the problem is that only the explorer"internet" working other program like map and market none.... i tried the app transproxy but did not work with me.... any ont solve this problem... pls help us....
my mobile is galaxy s... android 2.2 frayo

Proxy with Credencials
Hi,
I have the same problem too. I cannot connect to a proxy with credencials (username/password). Any help please post here.
Thanks
Eduardo

Download on your PC a program called CCProxy. It's a proxy server that allows cascading, so that it can connect to an authenticated proxy. Then in your Galaxy S you can set the proxy to the IP and port of the computer you installed CCProxy on.
I tested on a Galaxy S and it worked. The only problem is that you need access to a computer on the network.
CCProxy is a paid app, but the demo version works fine.

[Q] HTC TD2 & WPA Enterprise EAP PEAP MSchapV2

is it possible to connect to WPA Enterprise networks via WiFi? because I'm searching for a ROM which would allow to connect to the network on my university, which runs the following configuration:
SSID: eduroam
type: WPA-Enterprise
key exchange scheme: TKIP
authorization: EAP-PEAP-MSchapv2
IP: via DHCP
I tried it with the Energy ROM from the forum, but it doesn't allow me to enroll the certificate or it doesn't want to accept it. the other way round it doesn't allow me to enter a user name, I can only put in my password.
could somebody give me a hint what to do? I was searching the forum, found some registry hacks, but none worked

Try to change:
HKLM\\Comm\TNETW12511\Parms\WPAMixedMode
from 1 to 0.

ok, I tried it, but still the same happens:
I enter everything in the configuration menu of the comm manager, click 'next' and then I have to choose a certificate to log on - a little bit lower is a button called 'Enroll', which does nothing when hit. When I try to click 'done' it says that I have to enroll a certificate, so there's only cancel left ...
still doesen't work

well ... can somebody help please?
//edit:
well, as it seems nobody really knows how to work that out ...

Because I'm at my university every two weeks for the weekend, I'll be able to test this way of trying to connect to the WPA enterprise network in a week. but perhaps somebody else can confirm or obey this workaround:
Connect your device to your desktop/laptop and when WindowsMobileDeviceCenter (Win 7: just type the name in the search field in the start bar) opens go to Mobile Device settings >> More >> Get Device Certificates >> I know What Certificate I need to Enrol >> User ... then click enroll. Watch your device as you will be prompted to install the cert. Follow the prompts and after a few seconds you're done. When you setup your wifi connection choose PEAP and enter all the needed information.
Click to expand...
Click to collapse
It's help I got from microsoft social answers, perhaps somebody can try that out ...?

in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in

jones23 said:
in case you understand german
http://www.rrz.uni-hamburg.de/fileadmin/internet_kommunikation/smartphone/htc-hd2_uhh-wpa.pdf
it's from my university. it also contains the instructions for eduroam.
in addition to that manual, I had to uncheck "check server certificate" in the certificate tab of the secureW2 plug-in
Click to expand...
Click to collapse
yes, indeed, I understand german
thanks a lot for this tip, it looks a little bit different on a customized ROM and stuff, but in general it worked - I'll try it on friday or saturday, then I'll be at my university and able to give feedback!
when it'll work, I'll post a translated how-to in this thread...

sorry, I wasn't able to establish the connection with the tip by jones23 ... perhaps it works with WPA2, but not here ...

Hello,
what is the status of this? Did you find a solution?
I have the same issue since I flashed the EnergyROM.
Any ideas?

unfortunately it's truely not possible, I wasn't able to connect to the configuration from the first post using the HTC Diamond II ... damn thing!
but I'm gonna try this weekend something different: imho it's just a software problem, it's got nothing to do with hardware ... so I'm gonna try a dual boot with android and connect with that, perhaps this will work. I'll give feddback

ok, during clicking around on the device I found the solution:
Comm Manager -> Settings -> WLAN -> Network Cards
Here you can ignore the certificate and enter login data for the WIFI network.
Hopefully someone else can use this information.

@ taschenuhr
thats great to hear
@ others
perhaps you can use a notebook for testing purposes, since the connection & login data is the same. there's a windows (mac) version of that same client software.

[Q] Connectify , Virtual Routing with proxy settings

i am trying hard to shared my internet connection that works via proxy.
connectify and virtual router both connected to my phone and i can transfer the files via wifi , but internet doesnt work , cause its works via proxy . .
any suggestions or tool to bypass proxy or config proxy in the sharing connection

I had exactly similar problem.
Is there anyone can help?
Thank you.

Same problem here, with T-Mobile G2 running Android 2.2. Would appreciate suggestions/solutions

Same here, any progress?

Did you try WifiAid or ProxyDroid? More applications available in Market. Search for "Proxy" in Market

coolhunk4o2 said:
Did you try URL or URL More applications available in Market. Search for "Proxy" in Market
Click to expand...
Click to collapse
Have the same problem and Ive also tried using a proxy app. Still no good.
Any progress anyone?

did anyone fin a solution? I'm having the same problem