Related
OK i did a search but did not find anything really related..
a friend of mine at work here just handed me his 8125 after "attempting" to flash his ROM. Not sure what the heck he did BUT
1) the usb is not recognized so not active sync.
3) 3 battery meter only shows a plug (lower right ) yet the battery works.
the phone does recognice the charger..
HELP !!!
thanks in advance !
Reset, enter bootloader, reflash
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
DUlrich1227 said:
how do you enter boatloader .. ?
what other 2 buttons with the soft reset button ?
Click to expand...
Click to collapse
Camera Button is the only one you need to hold when resetting...
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
DUlrich1227 said:
i apologize but i must be missing something..
i reset (soft reset and camera button) get cingular screen
starts to boot up and goes to today screen where it does not recognize usb..
is there something else i am to do ?
Click to expand...
Click to collapse
Press the reset (or power down your device by holding the power button until you get the Okay to turn-off warning).
HOLD the camera button as your device powers up. This will get the BootLoader
just woke up and read your reply thanks ..
this is what i ended up doing
i bluetoothed from one of the roms enterbootloader.exe was able to run it
than ran one of the earlier rom upgrades..
re running the lockiwizb and will install sumters rom2
one question if you read this .. on both of the phones 8125's i get an error at the end of the bat file when running the lockiwiz.. is this normal ? is it because it was already ran once ? i am running it from the root (C
Hi, got a new tytn11 phone and was trying to follow the flash but messed up lol.
all i get now is a blank screen (black) with green led on.
thank you in advance for any help you can give.
dvkmartin said:
Hi, got a new tytn11 phone and was trying to follow the flash but messed up lol.
all i get now is a blank screen (black) with green led on.
thank you in advance for any help you can give.
Click to expand...
Click to collapse
u should read the sticky here:
http://forum.xda-developers.com/showthread.php?t=369282
u can definitely find the answer.
Were you trying to flash a stock ROM or a cooked ROM?? If it was a cooked ROM did you have Hard SPL on your PDA before flashing??
Please post your ROM, Radio ROM number if you can recollect the same.
hi i didn`t get as far as flashing i think. i didnt read the info right had no hard spl installed, it all went wrong whebn i pressed the camera power and done a reset, all i got next was a black screen nothing else.
sorry dont know what version things are only got the phone 2 days ago lol and was playing.
OK.. you never actually connected your phone to the comp and tried flashing a ROM?? did you try a hard reset?? you need to press the two soft keys (the ones above the explorer and messaging buttons) and simultaneously reset the phone using the stylus.
Follow the instructions on screen when you are asked to press the send key.
NOTE: all your contacts and data will be lost when you hard reset, but phone will be back in its factory state.
i formated the sd card with a program the format went ok then a message poped up saying you are still here somethink has gone wrong, then i pressed the camera and power button and done a soft reset now i just have a blank screen with green led on.
Have tried hard reset but nothing happens. the green and red button and the reset ?
Also did not have it connected to pc everything was done via sd card
dvkmartin said:
i formated the sd card with a program the format went ok then a message poped up saying you are still here somethink has gone wrong, then i pressed the camera and power button and done a soft reset now i just have a blank screen with green led on.
Have tried hard reset but nothing happens. the green and red button and the reset ?
Also did not have it connected to pc everything was done via sd card
Click to expand...
Click to collapse
Check my signature to know how to hardreset.
thankyou will try that now are the soft keys the call and hang up buttons?
just tried that with the keys above ie and messages but my key pad lights dont come on it like the phone is turned off accept one green led top of phone.
dvkmartin said:
thankyou will try that now are the soft keys the call and hang up buttons?
Click to expand...
Click to collapse
no :http://www.pdamobile.cz/pict/news/htc_tytn_2-hard_reset.jpg
thank u for the pic yes tryed that, the only thing that happens is the green led goes out nothing else.
dvkmartin said:
thank u for the pic yes tryed that, the only thing that happens is the green led goes out nothing else.
Click to expand...
Click to collapse
u need to hold the stylus in the hole a few seconds, if that will not help, I suggest u to read the "kaiser wiki troubleshoot section", there is an answer for sure.
ok thank you will have a look now.
Yesterday, I installed the custom firmware OTP 7.5. The thing was, that this firmware is in english and I needed a swedish one, so I entered regestry editor and changed a couple of things and mae the keyboard swedish. Everything worked perfect till then. When I tried these,
HKLM-SOFTWARE-MICROSOFT-INTERNATIONAL
Here you can add the desired language code:
ACP: Regioal setting (Hungary is 1252)
LCID: Language setting (English is 1033)
plus I changed the mui to the swedish, my phone wont enter windows and the usb cant connect now. It gets to the screen where it says "OT7" then it sticks there.
PLEASE HELP.
hard reset
If nothing else works, you should do a hard-reset (you said you've just flashed your phone, so there's almost no data loss).
how do I do a hardreset?
how do I do a hardreset?
Press both the soft keys and reset the phone but dont leave the two soft keys untill you see the hardreset screen,then press the green button. It will then perform a hard reset for you.
Sid_dominic56 said:
Press both the soft keys and reset the phone but dont leave the two soft keys untill you see the hardreset screen,then press the green button. It will then perform a hard reset for you.
Click to expand...
Click to collapse
Can u show with pics what buttons I must hold in?
Thank you guys, everything worked out perfect
Ada DJ said:
Thank you guys, everything worked out perfect
Click to expand...
Click to collapse
hay man what did you do to it which buttons did you push..
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
isp_85 said:
Hi,
I've searched alot for this kinda problem but it seems I AM the only one who has this problem.
I had succesfully installed R2AA0010 UK ROM 4 months ago using Micro SD Method, but now when i'm trying to upgrade it to R3A version the Volume Down+Power Button is not working and I can make it to tri color screen. (Just nothing happens)
I've tried SSPL Manual as well but it stops on screen "Loading..." and nothing is happening!
Please help!!!
Click to expand...
Click to collapse
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
agent_47 said:
vol down and the press the power key and keep pressing it till u see the tricolor screen.....don stop even if ur feel the vibration!!!
Click to expand...
Click to collapse
Yes, I did it. but no luck!
Any Idea???
try to hard reset first... then try to charge the new ROM.
wazaaappp said:
try to hard reset first... then try to charge the new ROM.
Click to expand...
Click to collapse
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
poetryrocksalot said:
You can just load the bootloader from the windows directory...
I think it is called botloader.exe
there is only 1 o... try to open that .exe bootloader should show up and you are ready to flash.
Edit: Your topic is misleading.... you said vol down and power button doesn't work but obviously it works....
Use clear storage to hard reset....and if you are doing sd card method maybe you forgot to rename your file into kovsimg.nbh or whatever it's suppose to be
Click to expand...
Click to collapse
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
isp_85 said:
how to hard reset then?
EDIT: I've found how to hard reset but when i'm pressing the silver buttons they're also doing nothing. (The WM will come up normally)
I think i'm gonna lose it
Click to expand...
Click to collapse
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
wazaaappp said:
turn off
take out battery and stylus
press silver buttons
turn on (keep pressing silver)
stylus in the hole in the back
5 secs
boot
try
Click to expand...
Click to collapse
Yes, that's what I exactly did! But the normal windows will come up!
HR through settings
another way to hard reset it to go
start > settings > system tab > clear storage
then press 1234 and press yes
maybe your spl is a bit damaged cause you can't hard reset and you can't flash sspl
try flashing hspl again
to hard reset
switch off
press both silver buttons
just press power button briefly, dont hold power button.
keep pressing both silver buttons till reset screen
hope this helps.
Holy crap you guys I do not know why I triple posted...
Thanks for reply!
Yes, I can go to tricolor screen through windows but as i said it will stop at "Loading..." screen. I've read the instructions and I renamed it to kovsimg.nbh as well.
I cannot hard reset using the silver buttons but I did it with clear storage icon! but nothing changed!!!!
I think my topic is correct, I didn't mean that my vol down and power buttons are corrupted or damaged, I mean It's not working when i'm trying to flash!
Any Idea?
Click to expand...
Click to collapse
Next time you can call this screen the bootloader screen... don't call it volume down and power button because it is very misleading...
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
human75 said:
hi mate.i can tell you your x1 is dead.because my phone has exactly same problem.i took my x1 to SE service and they change my touch pad navigation panel and navigation buttons.just 2days later phone got dead again now none off my buttons are functioning.i am gonna claim new phone from them.because they also gave same crack to phone panel as well.so dont spent your time.just bring back your phone to orginal condition and send to repair.everything your stock version orginal spl and orginal rom etc...i will let you know what SE tell me.cheers
ps: people complain about crack in their case.this issue (my buttons are not working any more) is very common nowadays we must complain to SE as well.this issue needs new sticky topic.thanks
Click to expand...
Click to collapse
But my silver keys are working in the windows normally
i get to the bootloader screen by pressing the camera- and the powerbutton. maybe that will work for you too?!
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
isp_85 said:
One thing else!
I can get to the bootloader screen by runnig the SSPL Manual in windows but the phone gets stock on "Loading..." screen and nothings happening!
I don't want to loose it
Click to expand...
Click to collapse
U need to copy Rom which U want to upgrade to SD card. If u want cooked room so flash Hard-SPL, and then it will automatically install rom U want. or if stock Rom so flash Hard-SPL back to stocks.
Hi Evryone, i'm new to all this
and i have a problem and i hope some one can help me out,
I have a Htc diamond2 clone from Taiwan the T5358+ with wm 6.1
first it workted fine, the i removed the battery becasuse i needed to acses
the micro sd card, after that it hard reseted it self so i lost al my stuff on it
that already happend 2 times, yesterday my phone just when out on it self and when i start it,
it freezed at the screen where it says "Touch Diamond2"
the buttons and power button dont work, i tryt resetting it couple times,
but the same thing happens, also when i remove and put back the battery.
Can some please help me out? because i cant use my phone now
Kind regards, Jairzinho
Sounds like it needs replacing. Is it under warranty?
DirkGently1 said:
Sounds like it needs replacing. Is it under warranty?
Click to expand...
Click to collapse
Im not sure, i need to contact the seller then,
but i dont know how it can be broking already, i just have it for 6 days
maybe i need to let some one take a look at it
Jairzinho said:
Im not sure, i need to contact the seller then,
but i dont know how it can be broking already, i just have it for 6 days
maybe i need to let some one take a look at it
Click to expand...
Click to collapse
Try hard resetting it again and see if you can get it back. You may have to try a few times.
Bruce Inman said:
Try hard resetting it again and see if you can get it back. You may have to try a few times.
Click to expand...
Click to collapse
How do i hard reset it exactly?
Jairzinho said:
How do i hard reset it exactly?
Click to expand...
Click to collapse
Pull out battery, reinsert, press power then hold both volume keys at the same time until tri colored screen appears then follow onscreen instructions.
Bruce Inman said:
Pull out battery, reinsert, press power then hold both volume keys at the same time until tri colored screen appears then follow onscreen instructions.
Click to expand...
Click to collapse
Tryd it a couple of times,
but i only get a black screen with the text touch diamond2
Jairzinho said:
Tryd it a couple of times,
but i only get a black screen with the text touch diamond2
Click to expand...
Click to collapse
I don't think you're doing it correctly.
That is your boot screen, so your device is trying to boot.
Try just hitting the soft reset button then IMMEDIATELY, before it starts to boot, hold down both volume buttons
Bruce Inman said:
I don't think you're doing it correctly.
That is your boot screen, so your device is trying to boot.
Try just hitting the soft reset button then IMMEDIATELY, before it starts to boot, hold down both volume buttons
Click to expand...
Click to collapse
Tryd that to,
i still get the same screen
T5358 isnt a diamond 2 phone... you bought a fake phone like diamond 2 ... give it back ...
same problem
same problem here. had the phone a couple of weeks.
when i hold down both volume buttons and power up, it says that file does not exist.
I have figured out that it is looking for an image file on the micro sd card.
I think you need to format a sd card load it with the .img file of the operating system and then try a hard reset.
But that's just a guess... where do we get the image file?
philsphone said:
same problem here. had the phone a couple of weeks.
when i hold down both volume buttons and power up, it says that file does not exist.
I have figured out that it is looking for an image file on the micro sd card.
I think you need to format a sd card load it with the .img file of the operating system and then try a hard reset.
But that's just a guess... where do we get the image file?
Click to expand...
Click to collapse
The image file would be the .nbh file of the ROM renamed to TOPAIMG.nbh.
Then it would flash a new ROM to your device, but you have to have HSPL installed first or you'll brick your phone.
Guys, you can't wronger.
The WM 6.1-6.5 has the option of Hard Reset from inside the running system. It's located in Settings/system/clean boot. Once you set the keys 1234, it reboots and hard reset (re-installs everything and revert back to factory settings, so you'll have to calibrate the screen, and so on).
BUT BE AWARE: The phone needs certain files stored in the original SD card. If you deleted them, you are f**ed. The folder ExtROM is where the files needed to restore the OS are.
I could upload the folder to somewhere, so you store back on the SD, and try. The fact it keeps asking for files is simply because they are not available.