Database Develop

plz help me - my x1 is dead? or not yet

hello friends
i need ur help
my X1 is jammed in the startup screen (Sonyericsson) logo and dont want to boot
i'v tried to flash any rom but its not working.
i can enter the bootloader but wont install any rom (jammed in loading) the new rom
plz if u can help me reply and thank u

done Hard spl?

are you using the computer or memory card for rom?
Couple of suggestions:
Make sure you re-named the file kovsimg,
Try a different rom.

hello again
i cant hardspl or dont know how via memory card! if u can help me
and i'v tried another roms and its not working

It's in a stickied thread.
http://forum.xda-developers.com/showthread.php?t=445662

[Qustions] the original ROM and the tf3d (landscape) rom

hi all i recently join this forum and i really like it and find a lot of topics about the x1 and i change my x1 much but if i want to my phone to be like the first time i turn it on with the first look of it with win 6.1 and the origin room and locked how can i return it back ?? i searched a lot here but i didnt find it u have a lot of topics i got lost ??? i also searched for tf3d working in landscape bcoz i tried this rom and it works sooo fast and great but no landscape also i lost while iam searching for it plzzz specify for me these two topics am still beginner here and lots of topics without instructions to how to do it so i really got lost plz help
thanks to everyone

first the orginal rom is here flash it like you normally would.
if you plan on flashing again the you don't have to do the next bit, but if your giving it in for warrenty then go here and follow the same instruction but when you open the hard-spl program replace the .nbh file with the stock one attached at the end of the post!

thx buddy i will try it and till u wat happen

hey man i extract the file it comes out an image file wat i do with that !!! it is not the same of wat i did before with the other ROM

Mo7a86 said:
hey man i extract the file it comes out an image file wat i do with that !!! it is not the same of wat i did before with the other ROM
Click to expand...
Click to collapse
Just rename the extracted file to (without quote) "kovsimg.nbh", and make sure it is not "kovsimg.nbh.image", then you can update your rom via micro SD method or run RUU. Read this thread, or this thread to update your ROM.
I hope this will help....

thx guyyyz it works finally

sry guys :S i tried to do update through the update service but not worked and the numbers appeard in the tricolor screen is 0.78000 plz help

ok i solve it thx again

flashing from sd card

Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help

Hi, not sure you'll be able to flash a new rom from SD card, unless you have the rom on another wizard. If so you can copy rom from other wizard onto SD card and transfer onto your wizard. Make sure you backup data on SD card because as soon as you load the rom image onto the card it becomes unreadable on pc. Which rom are you trying to load? hope this is of some help

MvSt said:
Hi guys,
want to flash my Wizard from SD-card, but i don't know how to rename thr nbh file. Whats name i have to use and how i have to start the rgu bootloader on the device?
thx for help
Click to expand...
Click to collapse
Unfortunately renaming the nk.nbf doesn’t work with the Wizard.
I discussed how you can make an SD image for backup and uploading “here in this thread”.

Rom flash from sd
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)

Thank you for the link I never found an alternative, I will have to look in to this.

swapniladsure said:
ROM flash from SD/MMC: Without needing 2nd device
here is link
http://forum.xda-developers.com/showthread.php?t=393370
go for it
My Wizard 200 is also Dead after downgrading version 2 to 1
so now it is totaly dead ..even not go in bootloader mode also..
so if any one know how to alive my phone than please reply me
thank you
(india)
Click to expand...
Click to collapse
First THX for this link, but it's not what i'm looking for.
Some time ago i read about only to rename the ROM.nbf into a nother name (don't know the name, i'm looking for), copy this to the SD-Card and start manually the RUU.
Than after the RUU is started you have to press the green phone button and the wizard will be flashed from SD-Card.
Know I'm looking for the name i need for the .nbf file...

As far as I know what you’re asking for can’t be done, if you find a way please do post it.
The link I posted above was the only way I knew of.

double post

Ok, I'll do.
If i don't find out the name i try your way ,
or i install MS Win Xp again...
or wait till i get my diamond and put the wizard back in the rack.

problem flash rom

i have problem to flash the rom used sd card , it say no image file after tri color screen , but i know i put the file under root sd card , please help thx

make sure the rom is renamed to kovsimg.nbh
also make sure in case the rom is a cooked one you have hardspl
and also make sure you thoroughly read stickys before startind a thread...
Cheers

read all the sticky threads then do as explained. when u did all this and u dont get wht u want then search the forum. u would have found this thread when u have done it.
http://forum.xda-developers.com/showthread.php?t=469300

just a qick question

the hd7 micro sd card after you swap it out can you format it and use it in a nother device if so how would you got about it i been looking for answers but cant find any.
please and thank you for all your help I am a noob here and im not sure if this question was asked if so I apologize.

I heard you need to use other phones like nokia to reformat it.