Hello,
I downloaded on my AT&T Fuze with stock ROM this program Diamond TF3D Config Setup v0.6.7 (2) to tweak the Touch Flo 3D i installed it and then i restarted it.
On restart it says an error message that shell32.exehas a problem and it wont work at all! It freezes!
Please help me....!
Please I dont know what do know...
Please please help me...
I dont know what do...
Options:
1. Install hard-spl and flash custom rom via Bootloader mode
2. Flash stock att rom again via Bootloader mode
(Search bolded words)
did hard reset after panicking
thanks for ther apid response!
you wanna see a magic trick?
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
shankyo said:
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
Click to expand...
Click to collapse
i have the same problem.somehow my p3600 radio is deleted.and now when i power on. it says NO GSM in start and then stuck on windows mobile 6.1 logo .
i installed new roms without Radio again stuck on start up logo.
whenever i installs radio rom it stucks on 13%.
i tried sdcard meathed it stucks on Gsm(Radio).
SO THE PROBLEM IS RADIO
hi all i recently join this forum and i really like it and find a lot of topics about the x1 and i change my x1 much but if i want to my phone to be like the first time i turn it on with the first look of it with win 6.1 and the origin room and locked how can i return it back ?? i searched a lot here but i didnt find it u have a lot of topics i got lost ??? i also searched for tf3d working in landscape bcoz i tried this rom and it works sooo fast and great but no landscape also i lost while iam searching for it plzzz specify for me these two topics am still beginner here and lots of topics without instructions to how to do it so i really got lost plz help
thanks to everyone
first the orginal rom is here flash it like you normally would.
if you plan on flashing again the you don't have to do the next bit, but if your giving it in for warrenty then go here and follow the same instruction but when you open the hard-spl program replace the .nbh file with the stock one attached at the end of the post!
thx buddy i will try it and till u wat happen
hey man i extract the file it comes out an image file wat i do with that !!! it is not the same of wat i did before with the other ROM
Mo7a86 said:
hey man i extract the file it comes out an image file wat i do with that !!! it is not the same of wat i did before with the other ROM
Click to expand...
Click to collapse
Just rename the extracted file to (without quote) "kovsimg.nbh", and make sure it is not "kovsimg.nbh.image", then you can update your rom via micro SD method or run RUU. Read this thread, or this thread to update your ROM.
I hope this will help....
thx guyyyz it works finally
sry guys :S i tried to do update through the update service but not worked and the numbers appeard in the tricolor screen is 0.78000 plz help
ok i solve it thx again
Hi`Guys
for the last few days im having an serious rom problem with my Sony Ericsson X1 sines i was looking for an good 6.5 rom that fits and works smooth with my X1 i found an cooked 6.5 rom belong to HD2 aka Leo2 and i reveiw it and i like it so i charged my phone to the full and unlock my phone using "HARDSPL Tool" after that i upgraded my phone with the new rom ,i like it at the first but after some times i faced alot of hangs and bugs within the rom besides the rom overload the processor that would make the phone runs slow so i had to place back my original rom so i used Sony Ericsson Update service "SEUS" to replace my current rom and when i runed the update it asked me to place back the stock SPL and i did and runed the update again but it said that i have he latest software update so i tryed to go all the way around and use the traditional way to downgrade my phone but here is the problem when ever i start the downgrade prosses it gives me update error number {[260] connection} the update stop and start the recovery prosses ,then i tryed to reunlock the phone but it gave me the same error ,so i tryed to get smart and i stop using the computer for the downgrading and moved to flashing methods farmatted my micro-sd to FAT32 placed the required nbh file named with Kovsimg but when i bootload my phone it stops at the loading part without going throw the checking prosses then done the same with the the SPL but the same it stick at the loading stage ,i start to get hopeless my last option was to use the MTTY Tool but it only formatted the rom without flashing the phone
so now im using 20% of my phone option to avoid bugs or hangs and my phone stick with bad 6.5 rom protacted with StockSPL that cant be changed
so guys any one faced the same problem ? plssss help i really feel like my phone its on handicap status
pls help me...
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
drnjstj said:
Try to install this:
http://forum.xda-developers.com/showthread.php?t=606799
Click to expand...
Click to collapse
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
error_man said:
im not looking for a rom i want to release my phone from it hanging in rom updating it stops at 0% when i use the computer and at the loading screen when i use the micro-sd
but thanks for ur help anyways
Click to expand...
Click to collapse
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
DrakenKorin said:
good info that
I read often that it might be solved with one of the following
1. Remove your SD card, run the HardSPL again, then reinsert the SD card with your kovsimg file and it should work
2. reinstall active sync via .msn
3. change the usp port and the data cable
4. disable firewall and antivir
...
But item 1 is reportedly the main reason for most of the error 260 connection failures.
good luck
Click to expand...
Click to collapse
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
error_man said:
sorry it didnt help it showed me a new error with the number of [262] now and the upgrade i think the problem its within the phone it self
thanks for the help tho
Click to expand...
Click to collapse
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
DrakenKorin said:
how did you try the update? w or w/o sd card?
if with card: did you check if the card is formatted as FAT32?
did you try it with a custom rom? maybe try a stock rom (pavelx1 thread) first
pls try to find some aid in hard-spl unlocker... thread
sry, but from here it's like looking for a needle in a haystack...
Click to expand...
Click to collapse
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
error_man said:
my dear friend i thank u so much for ur close support to me and my problem
i tryd the activesync first and after the update start on the computer and my phone the update stops at 0% on the computer and the phone as well then the update stops showing error #[262] update error then start the recovery prosses and i formatted my micro-sd to FAT32 and load it with the required file but when i bootload it start the update but stops at the 1st prosses the loading prosses and never move next to the checking and so on
i believe my problem it had something to do with the SPL the rom its locked with the StockSPL that not allowing the update to happen or to get unlocked with the HardSpl
Click to expand...
Click to collapse
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
DrakenKorin said:
it's of no use if we can't solve it ... and I'm nearly out of ideas
pls read this, hopefully it helps
Click to expand...
Click to collapse
it toke me really long time to find the file in other site other than rapshared and it didnt worked i tryed also newer StockSPL also the same the phone its not updating im getting really helpless here
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
ted presley said:
Have you ever tried to put your phone into the bootloader mode and try to hardSPL again?
Are you currently using win XP? Don't use Win 7 or Vista.
Click to expand...
Click to collapse
yeas my friend i tryed it many many times it didnt work it give the same error [262] and i dont really trust windows 7 or vista with my phone upgrade i only use windows Xp for such things
thank u for ur support n help...
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
NeoXerO said:
Try installing the newer SPL and then install hard-spl on a different computer without your sd card in the phone.
Click to expand...
Click to collapse
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
error_man said:
do you have any idea where i can find an newer SPL ? hope if it is not on rapidshare server
Click to expand...
Click to collapse
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
circleofomega said:
http://forum.xda-developers.com/showthread.php?t=431218
its on XDA server..just click on the first link down on a list of downloads..it reads: X1_HardSPL_v1.zip
hope I cud help
Click to expand...
Click to collapse
i didnt help too its the same one the i first used it that got my phone stuck..i really feeling helpless but i thanks u for ur hard work in helping me to get over my problem thanks
DrakenKorin said:
sounds like he means newer stock spl
not sure if the latest stock roms already have 0.78spl, but you will get it it you flash an older stock rom (0.52) and update via SEUS
cheers
Click to expand...
Click to collapse
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
error_man said:
can u pls tell me where i can find any new and old stocks..cuz SEUS is telling me that i have the latest software update
Click to expand...
Click to collapse
sure
check pavelx1 rom thread in the sticky section
hes got R1-R3 country specific stock rom collection
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
kjk said:
1. Download stock rom for your country and flash
http://forum.xda-developers.com/showthread.php?t=475482
2. follow instruction: how to restore Stock SPL for warranty reasons from this post
http://forum.xda-developers.com/showpost.php?p=2710557&postcount=1
3. use SEUS to update your stock rom
YOU MUST FLASH STOCK ROM BEFORE RESTORING STOCK SPL
Click to expand...
Click to collapse
i guess your way its the only thing that i didnt do yet but the problem is that all thouse stock roms are uploaded to rapidshare and i cant download it from there just hope is any body could tell me other site that i can download thouse new frimware or latest x1 stock rom
Hi everybody,
i read almost the all topics here,but i have a serious problem with my topaz.
I want to make a HardSPL to 1.83 Olinex. i did this..but in bootloader is 1,33,0000
But the biggest problem is, that topaz dont want to boot himself.
On screen is just Touch Diamons 2 and on left lower corner are red numbers.
So i can not to make a flash rom cause the spl si bad, and my phone is not working now so i cant make hardspl again to 1.83.
Hard reset doesnt work.
Knows anybody where can be problem?
thx a lot.
Matej (CZ)
flash the device from bootloader with the shipped ROM which is for your device. it should be fine then
thx for help, i will try it!
and where i can get an info about shipped rom?
and i have to do this with my SD card right?
u should check beegee's mirror or htc website, they must have listed a ROM for your country. u can flash it either way, from SD card or RUU.
problem solved, thx a lot
topic can be locked...