In need of help! Please. - Touch Pro, Fuze Themes and Apps

Hello,
I downloaded on my AT&T Fuze with stock ROM this program Diamond TF3D Config Setup v0.6.7 (2) to tweak the Touch Flo 3D i installed it and then i restarted it.
On restart it says an error message that shell32.exehas a problem and it wont work at all! It freezes!
Please help me....!

Please I dont know what do know...
Please please help me...
I dont know what do...

Options:
1. Install hard-spl and flash custom rom via Bootloader mode
2. Flash stock att rom again via Bootloader mode
(Search bolded words)

did hard reset after panicking
thanks for ther apid response!

you wanna see a magic trick?

Related

Crash when upgrading my trinity

Hi everybody,
I have a problem with my pocketpc.
I have flashed my trinity with the radio version 1.41.00.11 and the ROM WM6 2.2.
At this step, all is OK but when my pocketpc restart, I have the HTC screen and next the pocketpc is blocked with a write screen.
I have done a hard reset, and the result is the same.
Can you help me, please ?
Thanks a lot.
Flash again the rom
thanks for your response
I can't flash again because the pocketpc is unavailable
I can't access to the phone explorer via windows
Do you know by which way I can flash ?
Thanks
you might find the answer here http://trinityguides.info

Need HELPPPP plzzz

hey, im new to all this, the tutorials dont make sense to me, atm i know my device is:
-tmobile mda vario
-unlocked
-G4
and is rom verion 3.8.2.1 wwe
i tried to upgrade it with SNN Diamond edition, but when ever i tried this, i got to the part where it starts to flash, the mda vario screen goes to the screen with the three colors but then on my laptop it just crashes and seys something about it is not responding and you have to close it, i have tried with other roms, but same thing occurs
can someone plz help meee
use softspl
ok thanks, will it work with unlocked pdas?
need help agen lool
i tried updating the rom with TNT,19213 professional
and error [300] invalid update tool occured
it says this update utility cannot be used on your pda phone.please get newer update utiltiy plz plz help
You have to use SoftSPL, you can get it HERE
In this folder, you copy the "nk.nbf" of your favourite WM6 (and only this file), then start with "START-sSPL.exe" (make sure you're connected via ActiveSync).
When you read this here before, you know everything you need!
Probably you are not following the instructions and doing it correctly,try to go according to the guide,if it still doesn't work,it sometimes happens that SoftSPL fails,than you better do it through 'HardSPL'

Vodafone Original Rom - Downgrade - Problem

Hello everybody,
i have a big problem with my VPA Compact GPS (Trinity).
I flashed a rom from Lalle (http://forum.xda-developers.com/showthread.php?t=380151) to my PDA, and all is ok.
Although I want go back to my original rom from Vodafone. I downloaded from the website and try to install it on my PDA.
So...after few seconds, the computer said: "Error 260: Connection" (I translate it for you, it was German)
So I go to many forums and searched for this problem.
So I downloaded a "SSPL"-File and run it on my PDA.
Now I was in the Multicolor-Screen. But when I want to flash the Original-Rom, the same problem again, Error 260.
In this Multicolorscreen I also tried to flash Lalle's rom again, and it works...
What is the bug here? Do I need an original bootloader to flash the original rom? Because with the installed bootloader and the SSPL I can install Lalle's rom and other roms.
Also I have Windows Vista, maybe this is the problem???
Please help me quickly and sorry for my baaad English^^
YEAH!
All is dissolved now. I flashed my rom with an old computer with Win XP and it works.
My help for other guys with these problems:
1. A computer with Win XP...
2. Hard Reset with Power+Camera+Softresetbutton with the Stick
3. Start the Updateprogram
4. Follow the introduction
5. When all is fine, then the program find the PDA and start the Flashupdate without any ERRORS
Maybe I can help you...

plz help me - my x1 is dead? or not yet

hello friends
i need ur help
my X1 is jammed in the startup screen (Sonyericsson) logo and dont want to boot
i'v tried to flash any rom but its not working.
i can enter the bootloader but wont install any rom (jammed in loading) the new rom
plz if u can help me reply and thank u
done Hard spl?
are you using the computer or memory card for rom?
Couple of suggestions:
Make sure you re-named the file kovsimg,
Try a different rom.
hello again
i cant hardspl or dont know how via memory card! if u can help me
and i'v tried another roms and its not working
It's in a stickied thread.
http://forum.xda-developers.com/showthread.php?t=445662

trin100 D810 HELP!!!

please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...

Categories

Resources