Vodafone Original Rom - Downgrade - Problem - P3600 Software Upgrading

Hello everybody,
i have a big problem with my VPA Compact GPS (Trinity).
I flashed a rom from Lalle (http://forum.xda-developers.com/showthread.php?t=380151) to my PDA, and all is ok.
Although I want go back to my original rom from Vodafone. I downloaded from the website and try to install it on my PDA.
So...after few seconds, the computer said: "Error 260: Connection" (I translate it for you, it was German)
So I go to many forums and searched for this problem.
So I downloaded a "SSPL"-File and run it on my PDA.
Now I was in the Multicolor-Screen. But when I want to flash the Original-Rom, the same problem again, Error 260.
In this Multicolorscreen I also tried to flash Lalle's rom again, and it works...
What is the bug here? Do I need an original bootloader to flash the original rom? Because with the installed bootloader and the SSPL I can install Lalle's rom and other roms.
Also I have Windows Vista, maybe this is the problem???
Please help me quickly and sorry for my baaad English^^

YEAH!
All is dissolved now. I flashed my rom with an old computer with Win XP and it works.
My help for other guys with these problems:
1. A computer with Win XP...
2. Hard Reset with Power+Camera+Softresetbutton with the Stick
3. Start the Updateprogram
4. Follow the introduction
5. When all is fine, then the program find the PDA and start the Flashupdate without any ERRORS
Maybe I can help you...

Related

[Q] unlock rom image for hp 6515

Hi
I have a cingular hp 6515a . I cannot unlock it.I need an unlock hp 6515 rom image.please help me.
Unlock hp 6515
Thats very easy.
1: Download the (upgrade and unlocked) ROM from HP's website
2: HardReset your phone, but leave it in the first welcome screen (before the align screen and so)
3: Connect the phone to your PC, and wait for the connection to be established.
4: Run the downloaded Upgrade package (from HP), the phone will show a bootloader-screen.
Sometimes, the phone will not accept the upgrade program.
In that case do the following, but nothing else!
1: Disconnect the phone and soft reset it (it will come back into the bootloader)
2: Close the HP-upgrade program with taskmanager on your PC
3: Reconnect the phone to the PC
4: Rerun the HP ROM upgrade program.
Now your phone will show its upgrade status. It will take a while (about 20 minutes or so), but afterwards you will have a clean unlocked 6515.
I did this with several locked phones (especially Vodafone) from international sources.
Above will work fine, on every PC with Active-Sync (in my case 4.5) installed.
I assume, you will have a backup, made by the SIP-backup program on one of your memory cards. You can restore it after you've upgraded your phone
SKU error,, did not work
Unlock HP 6515
Did you use the rom you download here: HP 6515 ROM upgrades ?
I did it again today, but with a soft reset of the 6515 and shutting down the upgrade program with taskmanager. Do NOT Hard-reset the device or reboot your computer! Before restarting the upgrade, the computer has to reconnect to the 6515 although it is in the bootloader mode.
My hw6515 is dead after the upgrade to 1.21
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Has anyone managed to get this to work on a 6515 "A"? When I tried it I got an error message that said something like "Incorrect device SKU". I then decided to try upgrading to 1.20 which went smoothly. However, I still get the same SKU error message when trying to upgrade to 1.21. Is there a way to force it into bootloader mode? Anyone know some trick that I'm missing?
ROM Update 6515
SKU-error means wrong language.....
deivasankar said:
Hi guys,
I tried my cingular hw6515a to update the ROM to 1.21 unlocked ROM, it went successful but when booting it shows the initial setup and it hung on the second step "Pop-up Menus" and it doesnt show up any next button. What should i do now, please help me..
Thanks a lot in advance.
Click to expand...
Click to collapse
Retry the update, or downgrade to 1.20
I Think Not..............
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
I've done it several times. The HP Roms contains also the RadioROM.
If you just think it cannot done... Why don't you give it try...
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
What language do you use?
For WWE you wil find v1.21, v1.20, v1.12 and v1.00 here.
SKU ERROR help pls
cellsolution said:
Accordint to i know sim/Net locks r stored on different partison or ROM image of WM so when u upgrade it it dont removes sim/net locks..............
Click to expand...
Click to collapse
So how can we solve this problem?
Unlock and language change- this is how it worked for me!
This method worked for for an iPaq hw6515 after many long nights, but may be good as well for others:
Do this only from an Windows XP OS.
Make sure you have up to date ActiveSync from Microsoft!
To Unlock,
Just reflash your iPaq with the THE SAME language from HP official support site: h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=501212&lang=en&cc=us &prodTypeId=215348&prodSeriesId=501209&taskId=1 35
Connect your PDA to the computer and check it is in state connected in ActiveSync.
Download the current language ROM from the provided link, unpack, , and follow the instructions.
This official tool will do everything for you!
When it completes (~30 minutes), your phone will be unlocked.
After that if you need to change the language, follow this instructions:
How to change the language in your iPaq:
Here is the detailed process completed, borrowed from Barr :
1. Download and extract BOTH current and desired ROM language pack from HP site to the computer. Unpack them to different folders.
2. Establishing connection with the computer, copy EnterBL.exe (from desired language ROM folder) to the mydocument folder of the PDA.
3. Run the EnterBL.exe from the PDA. (Now your PDA will go to Bootloader mode).
4. (before executing step 4, prepare for step 5 since step 5 will have to be executed right after step4). From your PC, start updating the current ROM by lunching hpRUU.exe of the current installed language of your PDA.
5. Right after step4, when it will start updating, copy all the data (*.nbf) files of desired/intendedlanguage ROM pack to the current ROM pack. (the Rradio.nbf may be skipped if the device is already unlocked).
6. At the end of copying, it might show an error message, press OK to ignore.
7. The phone will restart!
Arruor said:
Hi there,
I've tried upgrade from 1.04 to 1.21WWE, but the upgrade process died on 12.5%.
I use the original rom upgrade from HP with ActiveSync 4.5 on XP.
I've tried many times to restart the upgrade process, but it fails on .1%.
Cann someone tell me where I can find the original 6515.bin. I've try to gogole it but with no success.
Thanks in advance.
Click to expand...
Click to collapse
Same here i reflash again last night but upgrade process fails on .02%

Help i breaked my Device please

Hey guys i tried to update my rom and while the update stops in 99% and said updtae ultiality Error.
now my Telefone doesn't start and stay in the 3 Colors Screen.
please Help
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
FloStilo said:
Hey,
i´ve the same Problem.
I wanted to flash my MDA Vario, but it stops at 99%.
Now, I can´t start the phone and I can´t connect it to ActiveSync.
So I can´t flash it again.
When I want to flash an older ROM, there came a fail.
Sorry for my bad english I´m from Germany... I tried my best ;-)
Click to expand...
Click to collapse
Always post the vital data of the phone,which is your device,G3 or G4,post the present IPL/SPL...? of the phone.Which rom you were trying to flash ?Does your phone get into bootloaders (tricolor screen) ?
It won't activesync in bootloaders or in the absence of a working rom (OS),but its possible to flash a rom in bootloaders.Download the official rom from the carrier's site and flash in the bootloaders to recover back to its default status.
Cheers!

Please help me!!!

I am a new one in this Windows mobile world. So I got Diamond but its in Danish. So, how to change language? I am trying everything but it does't change. Thank you
1. Download and install ActiveSync.
2. Connect your phone and cancel the sync message.
3. Read this post and follow the steps to flash Hard-SPL.
4. Pick a rom you like and flash it just like you flashed Hard-SPL
Any WWE rom changes your device language to World Wide English
Error [202] : connection
but I am 100% sure that its conneceted
Windows XP or Windows Vista?
Rebooted after ActiveSync install?
I had some Issues with flashing my diamond too. I wanted to get rid of branding stuff and i like my gear in english. ^^
So here is what i did. First thing first: HardSPL.
If you don't get a new HardSPL, no flashing will work (at least not on a branded one i think)
I installed 1.93 unsigned, because i wanted to get Radio Update.
The tricky part was, to copy SSPL-Manual.exe to the phone and execute it before starting the flashing process. After new HardSPL, flashing ROM, Radio, etc was kinda easy.
Just search in the forum for several Files you may need.
windows xp and I have rebooted.

Hard-SPL: Connection problems

Hello.
I'm trying to use Hard-SPL my device.
I did this 1 month ago I don't had any problems. After my first try I installed Touch-IT Xperience 2.5 ROM and had no problems too. It was fine.
But now, I want update my device and want to install Touch-IT Xperience 3.5 ROM.
I checked out, that I have to Hard-SPL my device again.
First I read this topic http://forum.xda-developers.com/showthread.php?t=431218 and download the first attachment (X1_HardSPL_v1.zip (1.28 MB). I unzipped it and run X1_HardSPL.exe.
In the meantime I'm already connect with my device with Microsoft Activesyn.
I click next until my device gets to a colour screen. There it stands only Loading but on my computer I get an Error message which says to me, that there is no more connections.
I have already tried another USB ports. I have only three on my Laptop. My OS is Windows XP Professional.
What should I do?
How can flash my device?
Sorry for my bad English :/
If you already have hard SPL installed then you don't need to flash it again
Just flash the new ROM you want to install
To install the new rom, I still need a connection but it breaks always.
So, I solved the problem.
I deactivated in Activesync the connection over USB.
Thread can be closed. Thanks

Unbranding HD Mini to latest HTC ROM

Please not that this is my first guide on here and I'll make it as easy to understand as much as possible.
This has been tested on a Vodaphone branded HD Mini. Please reply to this post if this has worked on a different branded phone.
This is to help people to Unbrand their HD Mini's.
Have you managed to flash it to the latest ROM? If not you need to do the following:
•Download the SSPL_RUU.exe and put it into an empty folder (http://forum.xda-developers.com/showthread.php?t=694409)
•Add the RUU_signed.nbh that you want to flash to your device into the same folder (http://shipped-roms.com/shipped/Pho...adio_Signed_32.2803.05.06_0.63.05.36_Ship.exe) Assuming you want Western Europe ROM. You can use a different ROM if you want
•Connect your HD Mini to your PC. Making sure you use ActiveSync
•Run SSPL_RUU.exe and following the onscreen propmts.
Once done your phone will reboot. Next is to flash a Radio ROM.
•Move your ROM from the folder which contains the SSPL_RUU.exe
•Using the ROM that you just used Extract it to a location of your choice by using winRAR. Look for
Radio_32.2806.05.06_0.63.05.40 and rename it to PHOTIMG.nbh
•Place PHOTIMG.nbh into the same folder as SSPL_RUU.exe and flash once again
•Once done you will have a unbranded HD Mini as if you bought it like that. This worked on my Vodaphone
branded HD Mini and worked a charm.
I'd like to thank DarkForcesTeam for the SSPL_RUU.exe and the rest of the developers that have made
this possible. Without them we would be stuck with these branded phones.
Could the Admins place this as a sticky please. Many Thanks
The phone hard-resets after radio flash ? I want to flash only the radio.
Thanks for your guide, wardy. Great explanation.
But it doesn't work with my HD mini.
It stays at 0% for quite a long time. Afterwards, there's an error saying something about a wrong ID.
I'm afraid I'll have to wait for a HD mini hardspl
ci6i said:
The phone hard-resets after radio flash ? I want to flash only the radio.
Click to expand...
Click to collapse
As long as you are using the SSPL_RUU.exe to flash only the radio & renaming then you can flash it. Yes after the flash the phone does hard-reset.
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
wardy_uk1 said:
Which part does it stay on? Please list the error exactly as it appears so that I can help you further.
If its ''Error 294, Invalid Vendor ID'' then download PHO03693.exe over to your device and install it then try to flash the radio again.
Click to expand...
Click to collapse
Thanks, I installed PHO03693.exe now. What happened afterwards:
-The error I get when I try to install any ROM via “DFT_SSPL_MINI” is “[202] Connection error”.
-If I enter boot mode via my endkey app and install via “DFT_SSPL_MINI” after that, it ends with “Error [262]: Update error”. When I click “view document”, it says: “dummy file”.
-If I try to install official HTC ROM “RUU_Photon_HTC_Europe_1.36.401.1_Radio_Signed_32.2803.05.06_0.63.05.36_Ship”, I get “Error [294] invalid vender ID”
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
wardy_uk1 said:
Not sure about that error code. Have you tried doing a hard-reset first then trying to flash the ROM. If your using Windows Vista or Windows 7 then try running SSPL_RUU.exe as Administrator. Hope this helps
Click to expand...
Click to collapse
I tried both Windows 7 and XP as administrator.
When I'm doing hard-reset, I have to install PHO03693.exe afterwards again. So I did.
It has confused me now mate :$ You'll be better waiting for the HSPL instead. Hopefully it won't be too long now for it.
I have a cracked hd mini with vodafone branding..........i wanted to install the latest official rom......but i'm unable to do so........also i'm new to all this stuff can anybody please help me with this.........thanks
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
rfung said:
Hi, I just extracted the ROM "RUU_Photon_hTC_Asia_WWE_1.36.707.3_Radio_Signed_32.2803.05.06_0.63.05.36_Ship.exe" with WINRAR, but I don't seem to find the Radio file inside, I only see the "RUU_signed.nbh" file which I intend to update, am I looking at the right place?
Thanks
Click to expand...
Click to collapse
Likewise I see no Radio file....
[edit]
Found the file now, download the latest HTC update http://www.htc.com/uk/SupportDownload.aspx?p_id=314&cat=0&dl_id=1024 & you can extract the file from there.
Can anyone confirm if flashing the Radio rom is safe? - the DarkForcesTeam original link warns against it! > http://forum.xda-developers.com/showthread.php?t=694409
Im using an O2 UK HD MINI but have upgraded the ROM to the latest just the radio has remained at 0.63.05.18
I flashed with east europen ROM and now (and before flashing) I don't have GSM signal on phone, strange is that signal show up sometimes 1/5 and disapear again after few seconds but nothing else.
I have one phone with original Spanish language and have same problem with signal. dunno why that happen.
can anyone send me the steps in german? i dont really understand it xD
sorry but my english ist not perfect
Managed to carry out the Radio ROM update with an O2 branded phone.
However the Radio rom listed is still the old one (0.63.05.18)
The update process appeared to take but the radio ROM has remained the same. So take from that what you will?!
help
Please help me guys! I think i've done exactly like u said but when i want to flash the RADIO (PHOTIMG.nbh) after i've flashed the RUU i get this message: the update utility cannot be used for your PDA Phone. Please get newer Update Utility
I downloaded the Radio from HTC site, it was 2 files dont know why? 1 small for like 700kb and the other 12mb....

Categories

Resources