Hello.
I'm trying to use Hard-SPL my device.
I did this 1 month ago I don't had any problems. After my first try I installed Touch-IT Xperience 2.5 ROM and had no problems too. It was fine.
But now, I want update my device and want to install Touch-IT Xperience 3.5 ROM.
I checked out, that I have to Hard-SPL my device again.
First I read this topic http://forum.xda-developers.com/showthread.php?t=431218 and download the first attachment (X1_HardSPL_v1.zip (1.28 MB). I unzipped it and run X1_HardSPL.exe.
In the meantime I'm already connect with my device with Microsoft Activesyn.
I click next until my device gets to a colour screen. There it stands only Loading but on my computer I get an Error message which says to me, that there is no more connections.
I have already tried another USB ports. I have only three on my Laptop. My OS is Windows XP Professional.
What should I do?
How can flash my device?
Sorry for my bad English :/
If you already have hard SPL installed then you don't need to flash it again
Just flash the new ROM you want to install
To install the new rom, I still need a connection but it breaks always.
So, I solved the problem.
I deactivated in Activesync the connection over USB.
Thread can be closed. Thanks
Related
Sometime ago I've installed pdaviet non-touchflo firmware on my Herald. Everything was ok, but i decided to flash an official RUU - before upgrading to Touch-It by itje.
And strange thing - after hard-reset, before any flashing i lost activesync connection. 3 PC-s, 2xXP, 1xVista - all computers simply doesn't see my pda. It works completely, it is charging via USB - but no connection with PC. Advanced network setteings -all the same.
Yesterday, before hard-reset it worked.
Ok. Tried to flash from bootloader.
The same thing - RUU says "no pda, sorry".
btw, bluetooth activesync works well.
any help?
edit:
and one more question. on one of the herald pictures here, i noticed "USB" string in the bottom of the bootloader screen. I don't have it on my herald. Is it normal?
edit 2:
Is it possible to flash Herald using microsd card?
Exectue clear storage. I think It will help.I remember it worked for some one
eujene said:
Sometime ago I've installed pdaviet non-touchflo firmware on my Herald. Everything was ok, but i decided to flash an official RUU - before upgrading to Touch-It by itje.
And strange thing - after hard-reset, before any flashing i lost activesync connection. 3 PC-s, 2xXP, 1xVista - all computers simply doesn't see my pda. It works completely, it is charging via USB - but no connection with PC. Advanced network setteings -all the same.
Yesterday, before hard-reset it worked.
Ok. Tried to flash from bootloader.
The same thing - RUU says "no pda, sorry".
btw, bluetooth activesync works well.
any help?
edit:
and one more question. on one of the herald pictures here, i noticed "USB" string in the bottom of the bootloader screen. I don't have it on my herald. Is it normal?
edit 2:
Is it possible to flash Herald using microsd card?
Click to expand...
Click to collapse
Im not sure if you are still having the first problem but there is a guide that one of our fellow members posted in the herald forum on installing Touch_It. It address this communication issue and how to reload RUU if you get stuck.
edit: found the guide try this http://forum.xda-developers.com/showthread.php?t=327046
mrbrady12 said:
Im not sure if you are still having the first problem but there is a guide that one of our fellow members posted in the herald forum on installing Touch_It. It address this communication issue and how to reload RUU if you get stuck.
edit: found the guide try this http://forum.xda-developers.com/showthread.php?t=327046
Click to expand...
Click to collapse
No - i even don't have usb connection in the bootloader
looks like it is very simple - usb dead. Strange, anyway.
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
I am a new one in this Windows mobile world. So I got Diamond but its in Danish. So, how to change language? I am trying everything but it does't change. Thank you
1. Download and install ActiveSync.
2. Connect your phone and cancel the sync message.
3. Read this post and follow the steps to flash Hard-SPL.
4. Pick a rom you like and flash it just like you flashed Hard-SPL
Any WWE rom changes your device language to World Wide English
Error [202] : connection
but I am 100% sure that its conneceted
Windows XP or Windows Vista?
Rebooted after ActiveSync install?
I had some Issues with flashing my diamond too. I wanted to get rid of branding stuff and i like my gear in english. ^^
So here is what i did. First thing first: HardSPL.
If you don't get a new HardSPL, no flashing will work (at least not on a branded one i think)
I installed 1.93 unsigned, because i wanted to get Radio Update.
The tricky part was, to copy SSPL-Manual.exe to the phone and execute it before starting the flashing process. After new HardSPL, flashing ROM, Radio, etc was kinda easy.
Just search in the forum for several Files you may need.
windows xp and I have rebooted.
Hello everybody,
i have a big problem with my VPA Compact GPS (Trinity).
I flashed a rom from Lalle (http://forum.xda-developers.com/showthread.php?t=380151) to my PDA, and all is ok.
Although I want go back to my original rom from Vodafone. I downloaded from the website and try to install it on my PDA.
So...after few seconds, the computer said: "Error 260: Connection" (I translate it for you, it was German)
So I go to many forums and searched for this problem.
So I downloaded a "SSPL"-File and run it on my PDA.
Now I was in the Multicolor-Screen. But when I want to flash the Original-Rom, the same problem again, Error 260.
In this Multicolorscreen I also tried to flash Lalle's rom again, and it works...
What is the bug here? Do I need an original bootloader to flash the original rom? Because with the installed bootloader and the SSPL I can install Lalle's rom and other roms.
Also I have Windows Vista, maybe this is the problem???
Please help me quickly and sorry for my baaad English^^
YEAH!
All is dissolved now. I flashed my rom with an old computer with Win XP and it works.
My help for other guys with these problems:
1. A computer with Win XP...
2. Hard Reset with Power+Camera+Softresetbutton with the Stick
3. Start the Updateprogram
4. Follow the introduction
5. When all is fine, then the program find the PDA and start the Flashupdate without any ERRORS
Maybe I can help you...
Hey guys,
I am trying to upgrade my XDA to WM6.5. When following the wizard steps, I enter the PDA into the bootload menu, but when I run the application on my XP desktop, I recieve the following error:
Error 150: Rom Upgrade Utility Error
This ROM upgrade utility does not design for your device.
Please get proper ROM upgrade utility and try again.
Help! It's frustrating the hell out of me!
please add which rom you currently use, do you have activesync installed
Me also have the same error
I have yust tried to install the new release with the same result.
I have a Qtek 9090 with WM 6.1 rel 5.2.20262 b. 19949.1.2.0.black, but in the past month I have tested many other...
Simply the install program don't recognize the device so cannot define if it's right or wrong.
Thank you in general for your fantastic jobs !
Sorry !
Yes I have Activesync installed (for another palmsize divice).
What????
Palm size device???? so you dont have activesync... you have hotsync but....
You already tried the WM6.1.... so you have activesync... men you are getting me crazy jejejej lol
BTW...
Try to conect your device if the activesync dont recognize it and sync.... restart your PC and PPC... the if this not works...
Uninstall the AS then Reinstall it..... if not works...
Try to change to other USB port
If dont works check your advanced conections settings
and check or uncheck the advanced network config box..... if not works...
BTW upgrading needs bootloader so put it on Bootloader mode conect it if your PC says something about not recognized just.... try other PC.... are you on VISTA or XP? suggested... XP.
Thanks
I have used very bad words, so don't panic ! The other device is a "normal" HTC 3300 (artemis) with 6.0 italian std rom and A.S. 4.5.0 (Build 5096) on Win XP.
The 9090 syncs regularly and it is regularly connected (I have stopped the bootloader and reboot the BA), I will test to reboot all, and eventually change the USBport, tomorrow morning (I am a little tired now and the eyes start to cross instead of read). As soon as I have done it I will and report here what does happend.
For now many thanks to you and to Xplode also.
night men!!!
Hope it works for you tomorrow... good luckits our pleasure to help.
Have you tryed the following ?
http://wiki.xda-developers.com/index.php?pagename=BA_FAQ_STUCK_AT_STARTUP
All Ok now
Symply from the last uprade of my 9090 I had changed the PC, so it haven't all the right Drivers.
Now, following Win XP requests (it was needing wceusbsh.sys) all is gone right so my 9090 actually exposes: CE OS 5.2.21169 (Build 21169.5.0.0) release. (and I am starting to play )
Many thanks to all.
you do not need drivers, install activesync in your pc, it includes al the drivers you need - if you have it and winxp still wants driver for the ba remove/uninstall activesync and reinstall it again - remember use the latest version of activesync
Hi,
Remove your "puce" and your sd card.
And try again of course with ActivSync.
For less worry upgrade on you BA's...I...WE recommend XP with Active Sync 4.5