Database Develop

unable to revert to O2 rom

Hi Guys,
i consider myself relatively experienced at flashing HTC devices having been using and upgrading for a few years but i've run into an issue on my CID locked G4. i upgraded to WM6 without issue and i tried to revert back to my O2 rom, the flash failed and i'm now stuck at the splash screen. I've tried to flash the original ROM from boot loader but i get a 101 error unable to connect(can see it in device manager). as i'm using vista i did a search and found some instructions and driver files but i get the same result. the only thing i can think of now is to CID unlock but i'm not sure it will help (unless it allows me to do the SD card restore). any ideas guys?
IPL:2.21.001
SPL:2.21.001
GSM:02.25.11
OS:10.1.0.811

OK., what you need to do is use a PC with XP, because i have read that vista PC's can get you into a lot of trouble. When you are at an XP PC, follow the instructions in my previous post
( http://forum.xda-developers.com/showthread.php?t=313354 ).
When you flashed the original ROM, and you succeeded in doing so, think real hard if you still want to upgrade to a new ROM.
If you still want to do that, stick to a PC with XP installed (no vista!).
If you did reflash a good ROM into your HTC you'll be one step closer to upgrading your ROM.
Read this post thourougly :
http://forum.xda-developers.com/showthread.php?t=298613
as this will help you in case you didn't CID unlock your device.
(thanks vippie; this is the clearest walktrough i could find!)
If you are really sure you CID unlocked your device, you can flash your device to any ROM you think is useful to you.
If your device is really CID unlocked, you should be able to flash any ROM that is posted on this forum.
I know that it is that easy, because i have tried every WM6 ROM that is posted on this forum
good luck, and i hope in the end you will have the ROM that you want....

thanks. my device IS CID LOCKED and i've tried to flash it from 2 XP machines so it is looking like its a brick thanks anyway.
for sale wizard with pretty 3 colour screen - sold as seen!!!

One thing you can try is use another USB to mini USB cable, i have had one cable that didn't connect really well.
Sometimes it worked but if i moved my phone the connection went down.
I just thought of that because it was a while ago that this happened - I threw away the faulty cable and had no problems after that.

tried 3 different cables too

knownuser said:
tried 3 different cables too
Click to expand...
Click to collapse
How much do you want for it? I need a new screen and body shell!

jabreu203 said:
How much do you want for it? I need a new screen and body shell!
Click to expand...
Click to collapse
was actually kidding i'd like to fix it but i'm open to offers PM me.

ok .....HELP
i've paid for the CID unlock which went well i then tried to flash the O2 default rom failed error 101 (connection) i then tried wizard love failed error (300) in italian.
so stage 2 was to use the sd card recovery i ran the utility and then followed the instructions r2sd all etc..all seemed fine i restored the image to the wizard and rebooted it still won't go past the splash screen i've tried re-flashing and hard reset still no go....please guys any help???

If you have a memory card take it out. Right click on ActiveSync and go to connection settings. Uncheck allow usb connections then try to flash. With windows XP...

tried to flash on a win2K machine (4 pc's thats the only one thats not vista) still get error 101 on the original O2 rom and 300 on the wizard love rom.
still no joy anyone have any ideas???
http://www.t-mobile.hr/mdasw/RUU_Pro...R_WWE_Ship.zip fixed i'm on a tmobile rom i'll try downgrading again.

Bootloader and nothing else

So guys i have a big problem:
I wanted to flash to the Touch WM6 ROM but at 44% the setups stucks now when i start my pda I only see the bootloader and nothing else.
I also tried to use RUU to update to another rom but i cant because I cant connect to ActiveSync or something else.
But the PC still is noticing that an usb device is plugged in and in the top left corner the bootloader displays "usb".
So what can i do now?
Thanks

RUU can connect to a Wizard in bootloader mode, try to disable USB connection is ActiveSync and try again.
Hope you have downgraded IPL and unlocked CID at first. If not, look at the unlock sticky in the forum first.

When you say TOUCH I assume you mean the Wizard reTOUCHED and not the actual HTC TOUCH rom correct?

Madcap180 said:
When you say TOUCH I assume you mean the Wizard reTOUCHED and not the actual HTC TOUCH rom correct?
Click to expand...
Click to collapse
yes the reTOUCHed rom
//EDIT
OK i disabled the ubs connection in activesync and it worked!
Thank for your help.
But now another question:
Why didn the reTOUCHed rom didnt work for me? First time i flashed WM5 started up and i had still my vodafone branding and no touchflo.
Second time the setup got stuck at 40%
What happened?

That means your device is not CID unlocked.

Upgrading help needed.

Hi Gurus,
Tried upgrading using different methods to O2 XDA IIs Asia Eng rom, however all methods seem to fail. Have already read the readme file.
a) Using Activesync and MaUpgradeUt__NoId.exe with the new rom.
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Activesync 4.5 somehow connects at first, detects the rom versions, and closes without warning, leaving the xda2s disconnected giving connection errors.
b) Using manual method,
Using editfix.exe & getdevicedata.exe
Somehow gets warning errors about invalid passwords and wrong header file.
Is it a type 2 rom ?
c) Done hardreset and Going direct into bootloader (V.2.08) and using usb cable without activesync. The word serial does not change to usb, hence there is no connection through usb to the xda in bootloader mode.
Any ideas ? SD Card interface is not working. My guess is that the drivers for usb and sdio is not working. Any input ? I know that the usb cable and interface is working as i can browse the windows folder using activesync.

Updates
Managed to solve the issue with the bootloader mode detecting usb.
I'm trying to download from WM2005 to WM2003 (O2 Official WWE 1.42 release - Asian version.)
Followed the steps exactly in this link :
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Copied the official nk.nbf rom to the downgrade folder as instructed. When i ran MaUpgradeut_noid.exe, the screen stuck at the checking of info of device. does not seem to be able to flash in bootloader.
I'm using v2.08 of the bootloader (and usb is being displayed.)
Am i doing anything wrong ? Is there an alternate method ? This doesn't seem to work for me.

please help
i've got a ppc660kit and i did the processing and when it was done and i reset it show some colored screen and at the bottom it says no gsm and d 5. somthing.
please help
thanks

just a guess
mtnbikefreak said:
Managed to solve the issue with the bootloader mode detecting usb.
I'm trying to download from WM2005 to WM2003 (O2 Official WWE 1.42 release - Asian version.)
Followed the steps exactly in this link :
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Copied the official nk.nbf rom to the downgrade folder as instructed. When i ran MaUpgradeut_noid.exe, the screen stuck at the checking of info of device. does not seem to be able to flash in bootloader.
I'm using v2.08 of the bootloader (and usb is being displayed.)
Am i doing anything wrong ? Is there an alternate method ? This doesn't seem to work for me.
Click to expand...
Click to collapse
just a guess, are you trying to flash your device from a widows vista pc, because connection errors especially happen there, because windows downloads new drivers while flashing, disconnecting your device, normally the manuals here are detailed step by step and seem to work for every compatible device, so there is probably the vista thing, a broken cradle or cable which is rather unlikely, or a general software issue with your pc
i forgot to ask, why are you using a Maupgrade, isn't he general upgrade file for blueangel compatible devices the Baupgrade?

nevermind
no i got it. i uploaded the 2.0.3 on my phone it fix the phone. but still shows the 4 color screen, that doesn't matter it still works
thanks anyways guys

I've tried for a few hours and I stil lcan't flash anything!

I tried flashing the Hard-SPL so I could flash the Evo 6 ROM but no matter what I do, manual flash auto flash different USB ports different cables different cab files nothing works. I have a stock ATT ROM on my Tilt 2. I was able to flash my Tilt 1 to 6.5 but for some reason every time I try to flash this one it just hangs and I have reset the phone.
Any advice? I'm kinda stuck here. anyway to flash off the phone without having to go through the PC and USB cable? As of now the phones stock with no mods.

Need more info
Are you getting stuck flashing Hard SPL or the when flashing the ROM?
You should probably try posting on either the Hard SPL thread or the "Flashing your first ROM" thread, depending on the answer. They will be more specific to your issue.
ar91207 said:
I tried flashing the Hard-SPL so I could flash the Evo 6 ROM but no matter what I do, manual flash auto flash different USB ports different cables different cab files nothing works. I have a stock ATT ROM on my Tilt 2. I was able to flash my Tilt 1 to 6.5 but for some reason every time I try to flash this one it just hangs and I have reset the phone.
Any advice? I'm kinda stuck here. anyway to flash off the phone without having to go through the PC and USB cable? As of now the phones stock with no mods.
Click to expand...
Click to collapse

Basically what happens is at the progress screen it never passes 0% and it acts as if its not connected to active sync. Even though it is, I initially tried to flash the ROM first but then tired the Hard-SPL and got the same results.

You should definitely post this in the Hard SPL thread by Olinex. You'll find great help there.
Good luck.
ar91207 said:
Basically what happens is at the progress screen it never passes 0% and it acts as if its not connected to active sync. Even though it is, I initially tried to flash the ROM first but then tired the Hard-SPL and got the same results.
Click to expand...
Click to collapse

don't know if you fixed this yet but I would check to make sure that you unzipped the files, both the hspl and the rom files before attempting to run them.

ar91207 said:
I tried flashing the Hard-SPL so I could flash the Evo 6 ROM but no matter what I do, manual flash auto flash different USB ports different cables different cab files nothing works. I have a stock ATT ROM on my Tilt 2. I was able to flash my Tilt 1 to 6.5 but for some reason every time I try to flash this one it just hangs and I have reset the phone.
Any advice? I'm kinda stuck here. anyway to flash off the phone without having to go through the PC and USB cable? As of now the phones stock with no mods.
Click to expand...
Click to collapse
Install this to your device and softreset...then try to run the hardspl again...

I just went through the very same thing. The CAB jhernand1102 posted above fixed my HardSPL problem. Using the latest HardSPL app (v2.00R3), it would fail to detect that my Tilt 2 was connected when selecting the Automatic process. On the final window of the HardSPL app, it gives a URL where to download the CAB file. I installed it on my phone, then was finally able to run the HardSPL app in Automatic mode.

What version of windows are you running? Have you tried downloading mobility center 6.1 and the matching drivers? I had this problem as well. Once I downloaded the update for windows mobility center I have had no problems at all.

You need to post your questions(s) in the HardSPL thread

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......