Hi Gurus,
Tried upgrading using different methods to O2 XDA IIs Asia Eng rom, however all methods seem to fail. Have already read the readme file.
a) Using Activesync and MaUpgradeUt__NoId.exe with the new rom.
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Activesync 4.5 somehow connects at first, detects the rom versions, and closes without warning, leaving the xda2s disconnected giving connection errors.
b) Using manual method,
Using editfix.exe & getdevicedata.exe
Somehow gets warning errors about invalid passwords and wrong header file.
Is it a type 2 rom ?
c) Done hardreset and Going direct into bootloader (V.2.08) and using usb cable without activesync. The word serial does not change to usb, hence there is no connection through usb to the xda in bootloader mode.
Any ideas ? SD Card interface is not working. My guess is that the drivers for usb and sdio is not working. Any input ? I know that the usb cable and interface is working as i can browse the windows folder using activesync.
Updates
Managed to solve the issue with the bootloader mode detecting usb.
I'm trying to download from WM2005 to WM2003 (O2 Official WWE 1.42 release - Asian version.)
Followed the steps exactly in this link :
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Copied the official nk.nbf rom to the downgrade folder as instructed. When i ran MaUpgradeut_noid.exe, the screen stuck at the checking of info of device. does not seem to be able to flash in bootloader.
I'm using v2.08 of the bootloader (and usb is being displayed.)
Am i doing anything wrong ? Is there an alternate method ? This doesn't seem to work for me.
please help
i've got a ppc660kit and i did the processing and when it was done and i reset it show some colored screen and at the bottom it says no gsm and d 5. somthing.
please help
thanks
just a guess
mtnbikefreak said:
Managed to solve the issue with the bootloader mode detecting usb.
I'm trying to download from WM2005 to WM2003 (O2 Official WWE 1.42 release - Asian version.)
Followed the steps exactly in this link :
http://wiki.xda-developers.com/index.php?pagename=BA_Downgrade_WM5
Copied the official nk.nbf rom to the downgrade folder as instructed. When i ran MaUpgradeut_noid.exe, the screen stuck at the checking of info of device. does not seem to be able to flash in bootloader.
I'm using v2.08 of the bootloader (and usb is being displayed.)
Am i doing anything wrong ? Is there an alternate method ? This doesn't seem to work for me.
Click to expand...
Click to collapse
just a guess, are you trying to flash your device from a widows vista pc, because connection errors especially happen there, because windows downloads new drivers while flashing, disconnecting your device, normally the manuals here are detailed step by step and seem to work for every compatible device, so there is probably the vista thing, a broken cradle or cable which is rather unlikely, or a general software issue with your pc
i forgot to ask, why are you using a Maupgrade, isn't he general upgrade file for blueangel compatible devices the Baupgrade?
nevermind
no i got it. i uploaded the 2.0.3 on my phone it fix the phone. but still shows the 4 color screen, that doesn't matter it still works
thanks anyways guys
Related
Sometime ago I've installed pdaviet non-touchflo firmware on my Herald. Everything was ok, but i decided to flash an official RUU - before upgrading to Touch-It by itje.
And strange thing - after hard-reset, before any flashing i lost activesync connection. 3 PC-s, 2xXP, 1xVista - all computers simply doesn't see my pda. It works completely, it is charging via USB - but no connection with PC. Advanced network setteings -all the same.
Yesterday, before hard-reset it worked.
Ok. Tried to flash from bootloader.
The same thing - RUU says "no pda, sorry".
btw, bluetooth activesync works well.
any help?
edit:
and one more question. on one of the herald pictures here, i noticed "USB" string in the bottom of the bootloader screen. I don't have it on my herald. Is it normal?
edit 2:
Is it possible to flash Herald using microsd card?
Exectue clear storage. I think It will help.I remember it worked for some one
eujene said:
Sometime ago I've installed pdaviet non-touchflo firmware on my Herald. Everything was ok, but i decided to flash an official RUU - before upgrading to Touch-It by itje.
And strange thing - after hard-reset, before any flashing i lost activesync connection. 3 PC-s, 2xXP, 1xVista - all computers simply doesn't see my pda. It works completely, it is charging via USB - but no connection with PC. Advanced network setteings -all the same.
Yesterday, before hard-reset it worked.
Ok. Tried to flash from bootloader.
The same thing - RUU says "no pda, sorry".
btw, bluetooth activesync works well.
any help?
edit:
and one more question. on one of the herald pictures here, i noticed "USB" string in the bottom of the bootloader screen. I don't have it on my herald. Is it normal?
edit 2:
Is it possible to flash Herald using microsd card?
Click to expand...
Click to collapse
Im not sure if you are still having the first problem but there is a guide that one of our fellow members posted in the herald forum on installing Touch_It. It address this communication issue and how to reload RUU if you get stuck.
edit: found the guide try this http://forum.xda-developers.com/showthread.php?t=327046
mrbrady12 said:
Im not sure if you are still having the first problem but there is a guide that one of our fellow members posted in the herald forum on installing Touch_It. It address this communication issue and how to reload RUU if you get stuck.
edit: found the guide try this http://forum.xda-developers.com/showthread.php?t=327046
Click to expand...
Click to collapse
No - i even don't have usb connection in the bootloader
looks like it is very simple - usb dead. Strange, anyway.
I have a stuck image on my 8125. The phone "boots" but only shows a white screen, and is unusable.
The "a2sd all" restore option mentioned in the forums doesnt work for me. I have read on several forums that I should be able to reflash the OS from the bootloader, though I cant find any instructions on how to do this
Could someone point me in the right direction for how to flash an OS VIA bootloader?
Thx
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Mirek - not to be totally ignorant, but the step 4 is what I'm having problems with .... where can I find either a providers ROM, or something that I can actually use while in bootloader mode?
Thanks!
NM ... Found it!
For anyone reading this .... You can get the provider ROM for the 8125 from HTCAmerica here: http://www.htcamerica.net/support/8125/software-downloads.html
Thanks for your help!
mirekluza said:
1. Get the phone to bootloader (tree color mode) - I think by soft resetting and pressing the camera button at the same time
2. Connect it to the computer (Windows XP) with a USB cable
3. You will notice "USB" written in a lower corner of the phone (this means it is connected)
4. Now you can flash your provider's ROM without any problems
I am not sure whether the bootloader flashing is possible from Windows Vista.
You must flash normally (in bootloader you cannot use either shelltools or SoftSPL - so use your provider's ROM).
Mirek
Click to expand...
Click to collapse
Dear Readers,
I'm having problem with my Dopod 900(,Qtek 9000,HTC Universal,O2 Xda Exec,Jasjar ). Can somebody please tell me what to do?
Before this, every time somebody called, the PDA lost the network bar and start to search or network and reject the calls automatically and also i wasn't able to send SMS. Now, i tried to install WM6 crossbow, the phone even cannot be on !!! even when i connect it to the charger, even the light will not be on. the only page that i can see is a white page asks Press 0 to Restore factory default or press X to exit. either perss 0 or X, the phone will be off and i cant turn it on with power key....
Please tell me what can i do ?? I really need your help.
PLEASE REPLY, PLEASE.
[email protected]
Warm Regards to All
G-Jorji
brick?
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
WHAT did you downgrade from?
Did you re-unlock your G3?
How's your battery?
acuraholic said:
hey guys, i need a little help. i downgraded my phone to buttons rom and then i was gonna attempt to upgrade the ipl/slp to 2.xx. so i downloaded the wizard ipl/spl 208 from the ftp site. i had a successful flash but when it went to reboot, my wizard never turn on again. ive searched the forums but it seems to me i have a brick found nothing. has anyone had the same situation happen to them? and find a solution?
it wont turn on at all anymore
Click to expand...
Click to collapse
IPL/SPL 2.08? Does that exist? Do you mean 3.08?
Are you sure your device is a G3? Or you killed it when flashing Button's ROM?
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Drake008 said:
I was performing the radio update on my MDAIII and now he hangs in the bootloader with USB in the upper middle und 2.08 in the under middle. All resets won`t bring it back to life. If I try to reinstall the update all I get is a blank message screen (update from version to version) in my Vista. How can I get out of there.
I did everything what was stated here
The original BAUpgradeUT won`t find my device. The MAUpgradeUt_noID.exe gives me the blank screen with the update from to screen.
Click to expand...
Click to collapse
I'm using a Vista PC.
After the Radio update to 1.15 the error described above is not to go away yet.
What to do, I'm nearly in tears.
Finally I got it back but with an old Romupdate from T-Online. Is there someone who got the QTC 9090 update (latest one)
That was fast..
im glad you solved your problem.
i think someone here has it.
just post what you need and make it as a title for others to read in the digest.
Im not a expert but is vista the problem??
Most likely.
Failed MDA II flash with vista notebook
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
mda3newbie said:
Hello everybody,
I just read this thread in hope to find a solution for my problem, which is quite similar to the one described here initially.
I got a used MDA III with T_Mobile ROM. Since I'm a customer with O2, I wanted to change the ROM to O2 as well. I followed the directions given in an other thread here (don't have the link just now) and during the flashing, the flash application suddenly had no connection to my MDA III anymore. It was securely settled in its craddle an connected to my laptop via USB. Now my MDA III is stuck in Bootloader Mode with USB v2.07 displayed on the screen.
Each retry of installing either the O2 or the T_Mobile ROM now meet with the error 101: no connection. I read here that you managed to update successfully with a vista pc. Thus I wanted to ask, how you did that since I just don't seem to find the reason for the connection failing each time.
Here is what i tried to establish connection so far:
* disabled virus scanner & firewall
* unplugged the mda III and plugged it in again. It was recognized as a new device but that didn't help the connection issue
Could you please post what you did to make the update work under vista? Help would be greatly appreciated
Click to expand...
Click to collapse
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
mda3newbie said:
thankfor the tipp and sorry for my late reply. Since I have no XP PC available i tried the mtty1.42.exe on my vista notebook. When i run it however, it only lists com port 1-3, no usb port. Do i have to make a special configuration on vista for it to work?
Thanks in advance,
mda3newbie
Click to expand...
Click to collapse
In vista i dont know...sorry for my late reply too.... in XP u must kill ActiveSync process called wincecom.exe. in vista, maybe u have to kill the Windows Mobile Device Center....i dont know...
Dont forget, put the Qtek 9090 in Boot Loader Mode (Pressing Power Button + Record Button + Reset), maybe will appear USB and u can format the device.
If this does not work, try on Windows XP....Find a friend with Windows XP and ask him to use his PC only to do that.
Maybe somebody in forum have the Windows Vista and can help u....
Sorry my terrible english....
Sjogos said:
Try on computer with Windows XP and kill activesynk (wcecomm.exe on taskmanager/processes)
Maybe it will work. If u cant flash O2 ROM try to use "MaUpgradeUt_noID.exe". On my Qtek 9090 allways flash using this APPS and allways work.
U can try too format device first, put it on candle and use "mtty1.42.exe". On XP, kill active sync, and open mtty1.42.exe and select port USB and put OK. Do "Enter" on command and should appear USB>. After this write Task 28. This will format all your PC. Try install SO after this. This command delete all files on PPC. I have attach files that you maybe need.
Click to expand...
Click to collapse
hi guys I tried the step by step process and when im enterin( Task 28 ) then pressed Enter -
Invalid command : Task28
For a help screen, use command ? or h
does any one know where the problem is??
Try this
Downlaod the XDA IIs .exe file and run it - no need to put into USB mode
http://www.o2online.ie/wps/wcm/conn...es+&+accessories/Xda+Range/Software+upgrades/
this should reset to factory default (o2)
it runs on vista too
I am not 100% sure it will work but worth a try
diesel_dog said:
Im not a expert but is vista the problem??
Click to expand...
Click to collapse
Yes, i know my reply is late but the problem ist 100% Vista! i Tryed 2 ours with vista...then i decided to format my pc and to install XP. At the first try it worked!
i got a wiza200 G3 IPL/SPL 1.0.6 that is locked to T-Mobile, now the problems are:
1) that i cannot access the Bootloader, i hold down the keys but it just resets and no bootloader comes on.
2) tried hard resetting it, the procedure goes just fine, but does not reset.
3) In addition to my problem the phone has a password set at the boot of windows but i do not know the password
4) when i connect the usb nothing happens(i tried all the possible solutions for this one but i think my usb slot is broken)
5) its SIM/CID locked
6) theres no way of fixing this isnt it?i have searched the whole forum for a possible CID unlock through an SD Card
but as I can see noone has found a solution about that yet..and probably never will..
Update: I managed to hard reset it and it gets in Windows now but the usb still does not work, I have established a connection with ActiveSync through Bluetooth and im trying to use WST and i do 'Enab RAPI + Unsigned Apps' and get good results:
Uploading files...
Running Cert_SPCS.cab to change Unsigned
Prompt policy...
Running EnableRAPI.cab to remove restrictions
on RAPI communications...
All Done!
You can fully use this service tool now.
Repeat procedure only after a hard-reset.
Click to expand...
Click to collapse
but the problem is when i try to CID Unlock i get this error:
Warning!
A device was detected but one (or both) of RAPI
Communications and Applications Policy isn't
enabled.
Use first button for that purpose and try again
Click to expand...
Click to collapse
Update 2
I Fixed this by manually put EnableRapi in the windows folder of the device and running it.
I used Lokiwiz and tried to CID/SIM Unlock it, but im not sure if it worked, after each step the device rebooted just
like it said in the 'readme' file, now is there any chance to put custom ROM to the device through bluetooth?
any help is much appreciated, thanks in advance
also i have another HTC wizard with custom WM6 if that helps..but its G4
Okay, first of all, your post is somewhat confusing, but it appears you are trying to get a custom rom onto your G3, right?
You already hard reset your phone, so now to deal with the bootloader problem...
1. turn your phone off, and remove the battery just to be sure.
2. hold the camera button on your phone.
3. insert USB cable into the phone.
Now your phone should be in the bootloader mode, and you are ready to start the flashing process!
Flash to the most recent Official ROM. Then follow whatever tutorial you found to flash your phone.
Oh, and I am not sure, but I do not think you should use the bluetoth connection to do the lokiwiz stuff. Use the USB cable. Also, I would suggest you find and learn to use the Wizard Service Tool. It does more, and I think the GUI might be just right for you.
thanks for the reply, but the problem is that my usb port is damaged and i cant get it to work. i managed to unlock cid/sim through lokiwiz using bluetooth, i tried flashing the rom with bluetooth but it wouldnt work and that is normal because when you use a custom ROM installer the installer makes the device go to the RPG mode and there it loses the bluetooth connectivity, is there any other way to install the ROM?maybe with SD Card or something? I have the searched the forums but cant find a solution that actually works
I did a search myslef, and all I came up with was this: http://forum.xda-developers.com/showthread.php?t=366894
My only problem is this: I have never been able to sync a phone through bluetooth without first making a USB connection.
I do not want to upset you, I just want to make sure you don't give up on a possibly working phone.
i can make a connection using bluetooth and unlocked my sim/cid, now i just need a solution to flash the rom without the usb
then you will have to find someone with a G3 that is willing to do what is described in the link I posted above.
can anyone from here help me make this backup sd card?
Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
I don't believe it is possible unfortunately.
What issues are you having? Have you tried updating (or even downgrading them depending on what you currently have) the usb drivers?
The probleme that most of us flashing new cooked ROMs & my device get stucked several times. Likely it is connected via USB, Otherwise I can not do any thing.
Also due to several ROM flash times the USB connection in HD (or other devices) might broken.
This why we need a way to install USPL or HSPL via SD card.
Can some one help?
Regards
What I don't understand is how can a usb port become 'broken' due to flashing several custom build roms?
I too having a problem with the usb port on my blackstone. It can only be charged but not synchronized with pc anymore. I had HTC pick up my phone to have the mainboard replaced. Luckily the phone was still under warranty, so it won't cost me much.
Can someone explain?
i had similar probs ...
went to regedit , local maschine, software, microsoft,
windows ce services and changed to (1) the key : hasusbdevice
after this no problems anymore
it seems that a program installation changes this number from 1 to 0.
i have win 7 32
kersey said:
Hello all,
I'm having big problems syncing my phone to pc...is the above possible via MicroSD card...I know flashing a rom is but can I hard SPL it in the same way
Thanks in advance
Click to expand...
Click to collapse
This is not possible infortunately. However you do not need your device sync'ed with your pc to run HSPL. You only need to put device into bootloader and then connect it to pc. Bottom of bootloader should change from 'serial' to 'usb'. If not, you will need to update usb drivers. All this info can be found on this thread, no need for another
Thread closed