Database Develop

Updating to WM6 ROMs on Vista

Hey All-
I'd appreciate any help anyone can offer. I am having problems updating to any of the WM6 ROMs out there (up here). One of a few things is happening:
1) Either RUU crashes just after it successfully sends my PDA in to bootloader mode, or
2) RUU is able to stay up, but for some reason, does not like the update file:
I either get an error: "This NBF file cannot be used for your PDA Phone. Please get a newer NBF file.", or
it suggests the nbf file is "corrupted", I think indicating the RUU util I am running is out of synch with what the PDA is expecting.
I'm using a T-Mobile MDA (Vario?) and Vista.
I've tried all of the solutions I have been able to find:
* changing the driver to HTC USB Sync so that it can "reconnect" once in bootloader
* various flavors of the update utility to get around the crash, which do not let me upgrade to the ROM of choice!
* hard reset of the device
* I even tried pulling down one of the ROM upgrades from the T-Mobile dowloads site and dropping that in with a WM6 ROM nbf file. That was a huge flop.
I know people have done this! I've seen it over and over again. So what in the world stupid thing am I doing to not make this work?
Thanks.
Joel Niemeyer
Seattle

RUU doesnt work on Vista. Use shelltool.

Thanks for the advice. I'm sure it was good advice, but I am three hours in to it running now, and I don't have a good feeling about it. I think it says it would take at least 15 minutes. Not 180! Ugh, now I wonder what I should do?
Joel

jniemeyer said:
Hey All-
* changing the driver to HTC USB Sync so that it can "reconnect" once in bootloader
Click to expand...
Click to collapse
How do you do that? Thank you because when i try to downgrade my ROM or w/e so that i can unlock it when i gots to bootloader the fred green blue thingy it doesnt reconnect to active sync and maybe thats my probelm...=[

chaos, just look around for the RUU with Vista instructions- they are everywhere!

hey mate,
just follow this instructions http://www.modaco.com/index.php?showtopic=252977 to falsh every official ROM under MS Vista. Surely, when it comes to WM6 you gotta use the Shelltool.
regards
irm

Answer for Vista
My question is why don't people just dual boot vista with xp or 2000/etc...that would solve a lot of issues about the problems with vista.. just boot to xp..
I figure if you have the $Funds$ to spend on a $250+ phone you could shell out $50 for a 150gb 16mb cache HDD for your pc and dual/tri/quad/etc... sheeet son i've been doing this for years with linux/m$/mac.
Gotta face it, some software just runs better on one OS over another. peace out.

can someone confirm shell tool work

ANTC said:
can someone confirm shell tool work
Click to expand...
Click to collapse
I tried it, took like 6 minutes then it was completed, knowingly it wasnt flashed right, but did the hard reset on the phone and was stuck at the SPL screen, so just loaded up VMWare to reflash.

It worked for me...
I flashed one of the WM6 ROMs using my Vista Ultimate computer. One of the main parts in making the thing work is remembering to put your computer in bootloader before doing it. On post #7 in the MoDaCo thread, it says this.
Once more, here is the link: http://www.modaco.com/RUU-on-Vista-It-can-be-done-the-ultimate-guide-t252977.html

so your saying witht hat tut you flash a custom rom??

Yes
Yes I was able to. I don't remember which, but I think i was Core 2.0

Yeah, I was able to use shelltool to make this happen. Thanks for the feedback, folks. Only hang up was that it had appeared to have seized up (was seemingly stuck before the "End" portion). I waited for like 3 hours before I finally threw up my hands and hard reset the unit. Low and behold my wizard booted up in to the new ROM and I have been good to do since!

Bootloader question/trouble

Hey there everyone, I am pretty new to this forum so I must apologize for throwing you all into the deep end. I recently purchased an o2 XDA mini S second hand from a guy on boards.ie here in Ireland. I got the phone and really liked it because it allowed me to get rid of my Dell Axim X3i and mp3 player and keep it all in one device.
After a little bit of more research I discovered that I could remove some of the bloatware from the o2 xda mini S by just hard resetting and choosing the basic option which I than did. Still not satisfied with the overall performance of the XDA I decided to try a rom upgrade. Not wanting to do a totall overhaul I decided to just do a radio upgrade first.
My device is sim unlocked, it was like that when I bought it. I used the latest wizard service tool to CID unlock the device before I even flashed the phone. I also used the wizard service tool to change the nk.nbf file within the o2 mini S radio update into 96000000-GSM.nb. I then used this file to write to the GSM radio code (Bdk 1) according to the wizard service tool in the hopes that it would upgrade my radio version.
Well when I restarted, nothing of the sort happened, on the boot screen I noticed I was now missing my GSM version and when the phone finally got into windows mobile, it did not pick up any signal even though beforehand it could. The phone also became super slow to the point where it was unusable.
I have gone into bootloader mode subsequently after reading on this forum and tried to reflash with a number of updates with active sync disabled and nothing else running with the phone connected via usb to the pc. None of the updates would even pick up the phone or allow me to flash it.
My phone is pretty much screwed, I have a spare so it is not that big of an issue but I would like to make this usable again if at all possible. So my question is how do I flash a rom while the phone is in bootloader mode?
P.S I forgot to include the Current boot screen details:
IPL - 1.05
SPL - 1.05
OS - 1.5.4.2

Hi,
You can use the Wizard Love Rom from here http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar

Hey there, thanks for the advice, I did download that ROM but like I said before, none of the roms manage to flash my XDA because they all cannot seem to connect to it. Activesync does not even pick it up in windows mode, and even when I have it connected in bootloader mode via usb and I double click on the love rom, it goes through the motions but never managed to "verify the information with the pda"

Try a stock Tmobile ROM but not from bootloader. Also, I would check the activesync app on the device. Make sure it's set to use USB as the default connection method.
A few other steps to try...
Uninstall ActiveSync and install an older version. If still no go, try a newer version.
Try a different USB cable and/or USB port.
Try a different computer with XP, not Vista.
Try flashing it without the SIM card or any memory cards.
If all else fails, you can try the SD card flashing method. There are instructions in the Wiki on how to do it, but always a stock ROM.
Try this one... http://forum.xda-developers.com/showthread.php?t=311027
Updated IPL/SPL and radio 2.69

Hey Devis, I think I have come one step closer, I tried all the suggestions that you made. Except well now my phone will not even go into the operating system when I switch it on. It will boot and the version numbers show but then it just resets itself.
I tried a different usb cable and I am not using vista, tried a different pc and the same result. The one place I did have some marginal success was the sd card method.
Basically what happened is that It backed up the OS from my phone and then reloaded it, not exactly what I wanted since the OS and rom are both screwed on the phone so my question at this point is, is there anyway using the SD card method to load one of the stock roms onto my phone?
I searched around the net and found the opposite to the "r2sd all" function, would be the "s2d" function, would that allow me to flash the phone with a stock rom?
Thanks for your time, I am going to call it a night here in ireland and head to bed.

Ok, if the phone resets then you probbably have a dead/dying battery. Charge it for about an hour or so using the wall charger, not the USB cable. Try to restart it and see if you can get in the OS. I was looking in the SD card method thread and some guy was successful at restoring the image from the SD even though his OS had died. He then had a fully functional phone.
The other thing to do would be to get the image file from someone that has a living and breathing wizard, preferably one with a stock ROM. Since this method is the equivalent of making an image of a PC using Ghost, the restoration of such an image to your Wizard should work just fine.
Just make sure that the other Wizard is SIM and CID unlocked. Or just go buy a Wizard from the store, unlock SIM and CID, copy the image on the SD and flash your device. Or... since u've got a new Wizard in your hands, just take the freaking thing appart and swap the guts return the store bought wizard to the store saying that the thing just doesnt freaking work!
As for the AT commands... it is possible that s2d would workfor you, it doesn't work in my wizard. from what i have been reading it appears that the bootloader is password protected and that password is randomly generated. I haven't played long enough with it to figure out how to get the password.
It looks like you've got some "trial and error" processes ahead of you. There is a wealth of info on bootloader AT commands on Wiki, nothing for the Wizard though. But something may work... not sure.
I could try to get you a ROM dump from my Wizard but I already am on SPL/IPL 3.08 and running WM6. the SPL/IPL version alone wouldn't allow you to restore from my backup.

Hey Devis, thanks for your time, just woke up here, will work some more on the phone today and let you know what is going on

Hey Devis, I did not even get a chance to fiddle around with the phone today, from being able to switch on less than 24 hours ago, it does not even want to switch on now so I am going to officially declared it a brick and move on. Will see if anyone can fix it for me, spent way too much time already when I should be working on my dissertation, thanks alot anyway

Sorry to hear that...
I have bricked one phone myself in the past... my old Pana GD87 and I absolutely loved that phone. I know how you feel.
Good luck with your dissertation.

Unable to fix Stuck @ splash screen.... Can I use miniSD reflash?

My wizard (Cingular 8125) becomes unstable recently so I decide to reflash. Due to my stupidity, my laptop went to sleep mode while flashing. I thought I bricked my phone but it seems semi-bricked. After looking around, I try to fix using bootloader mode (holding the camera button while turn on) and I can get to the bootloader mode but my Window refuse to connect.
I'm running Vista and it doesn't connect. Try killing Mobile Device Center thread and changed the PPC driver and still not connect. Try the "vista flash guide" sticky above but doesn't work....
So, is it possible to do this via miniSD? I don't have any backup. My previous ROM was original Faria WM6 rom (old one, not his recent one)......
Help needed.....

Well,I wud like to advise you to first try to reflash with pc running winXP,as it's highly recommended,as win Vista still has many issues.
Secondly,to flash through MiniSd,your phone must be CID unlocked and a working Rom is already backed up on a MiniSd card.

I already have the phone CID-unlocked before my previous flash. I have been using Faria ROM for about a year but it's just start having problem recently.
I do not have access to XP machine that I can mess with now. It would be great if I could have some vanilla ROM updated via SD while I'm waiting....

i would like to know how to flash via SD also my usb port is broken and haven't been able to update my rom for months now

Keland44 said:
i would like to know how to flash via SD also my usb port is broken and haven't been able to update my rom for months now
Click to expand...
Click to collapse
If the phone is CID unlocked and you already have a backup of the rom on a Minisd card,Yes! its possible using the MTTY 'rs2d.all' command.Read here how to do it:-
http://forum.xda-developers.com/showthread.php?t=276963

What on earth am I doing wrong when flashing?? *SOLVED!*

Hi, first of all let me begin by saying that I have spent a long time reading around through the guides and forums about flashing rom/radio to my Rohdium but still face problems. I have successfully flash my old TyTN II and Orange E650 but am at a loss as to why Im struggling this time round!
I flashed the Hard SPL which went 'fairly' smoothly, got there in the end after having problems on WIndows 7 64bit and then succeeded using Xp 32. However when trying to flash a new rom and/or radio I am greeted with an error, that being Error 284. I have tried like I say on Win7 64, Xp32 and when the error pops up my phone gets stuck on the process bar and forced to pull battery out. I then put it back in and it freezes on bootloader. The RUU software trys to recover but it is a loop of the same thing happening (attempts and then crashes). The only way to get out of this mess was strangely reflashing HardSPL which recovers it and allows me to boot to Windows. I have tried flashing a radio and/or rom whilst in sync within windows, I have tried flashing when manually forcing the phone to enter bootloader, I even paid the £10 to get the unlocker which would patch the special radio but that even returns the same error. I have the sim card out and storage card, battery charged over 50%. I even tried the Mtty program (sorry if mispelled, at work now and can't fully remember name!) when it was stuck at bootloader and using the "boot" command it boots as far as Touch Pro 2 logo but then doesn't progress, then i resorted to reflashing HardSPL which allowed me to boot properly. I just don't know what else to try!
Like I said Im sorry if this is obvious to someone but I have tried alot!
Many thanks in advance if someone could help!
* Update: Just tried flashing a radio on my works computer (XP 32) and it flashed no problem!? Wonder why my operating systems had an issue?
** SOLVED! ** - got home and randomly tried again on Win7 64 without using my USB extension cable and plugged into a different USB port directly and it worked! Faulty cable maybe, bad luck, who knows, it works!
Thanks.

Sound like maybe your RUU/update utility may have gotten corrupted. I would try to re-download the rom you want to flash over to your home pc again and try to re-flash.
If that doesn't work, you can always flash your rom through the storage card.

hmmm yea thats possible, will try when I get back in couple of hours thanks! Just seemed weird how nothing was working, different roms (cooked roms or shipped roms) and even the security/sim unlocker that I purchased......mystery!

USB cable tends to go bad easily! That might be the reasion why!

[Q] ROM Flashing from PC on Mac - not working

I am trying to flash the ROM on my Touch Pro 2 before I sell it. I am running windows XP on a mac using Parallels 5.0. I have tried running the ROM update when active sync is connected and all starts ok then I get error 226 saying cannot connect. I then tried flashing straight from a newly FAT32 formatted microSD card and that jsut stocks on with a Loading message. So I tried flashing Hardspl, although I think that I have done this before when I still had a pc, but that failed with a connection error too. Any tips/advice anyone?

You need to provide more information. Are you trying to flash a custom ROM, and which one? What ROM are you running now? What version of the phone do you have/what carrier?
If you are still HardSPLed, the second line of text on the bootloader (tri-color) screen will say "OliNex", probably saying "SPL-0.85.Olinex". If it doesn't say this, the SPL is locked, and you won't be able to flash a custom ROM.
If you are trying to flash the stock ROM, I think some people have been having trouble doing so with the phone HardSPLed. But it may depend on what stock ROM. I am able to flash the Euro stock ROM just fine on my HardSPLed phone.

ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??

jbevan said:
ok, i'll try to answer your request for more info:
trying to flash Energy Rom build 23699.
Existing ROM version is listed as 2.07.401.1 (80303) WME dated 2/4/10.
Phone is an unbadged HTC Touch Pro 2 as sold by Tmobile etc in UK.
Can't see any mention of OliNex on bootloader screen, so perhaps I didn't unlock= it after all. Certainly no T mobile stuff left on the phone now.
??
Click to expand...
Click to collapse
Don't know off hand what ROM that you have installed right now. What do the boot screens look like when you start the phone? Also, what does the bottom row of red letters say, when you startup the phone?
If it doesn't say Olinex on the bootloader screen, you are not HardSPLed. Either you never did it, or you relocked it.
Run HardSPL, and you should be able to flash from the SD card no problem.

Redpoint. Thanks for your replies and interest. I have tried to run HardSpl but this fails with a 260 connection error, even though Activsync is synced and connected. Id this to do with running a virtual pc on a mac perhaps?

Your welcome, hope my advice is helpful.
HardSPL is pretty finicky, even on Windows Vista and Windows 7 systems. I think running it on a Mac is difficult or even impossible. You can search the HardSPL thread and see if anyone was able to get it to run on Mac. I'm pretty sure I read different users on that thread mentioning issues with running HardSPL on Mac.
My best advice would be to run HardSPL on a friend's Windows XP system, if possible. It usually runs smoothly on XP, and only takes a couple minutes.

Yes, that confirms my suspicions. I will try it frommy partners windows XP netbook whenshe gets home. Fingers crossed.
Will let you know how I get on and if I need any more help!