Database Develop

unable to revert to O2 rom

Hi Guys,
i consider myself relatively experienced at flashing HTC devices having been using and upgrading for a few years but i've run into an issue on my CID locked G4. i upgraded to WM6 without issue and i tried to revert back to my O2 rom, the flash failed and i'm now stuck at the splash screen. I've tried to flash the original ROM from boot loader but i get a 101 error unable to connect(can see it in device manager). as i'm using vista i did a search and found some instructions and driver files but i get the same result. the only thing i can think of now is to CID unlock but i'm not sure it will help (unless it allows me to do the SD card restore). any ideas guys?
IPL:2.21.001
SPL:2.21.001
GSM:02.25.11
OS:10.1.0.811

OK., what you need to do is use a PC with XP, because i have read that vista PC's can get you into a lot of trouble. When you are at an XP PC, follow the instructions in my previous post
( http://forum.xda-developers.com/showthread.php?t=313354 ).
When you flashed the original ROM, and you succeeded in doing so, think real hard if you still want to upgrade to a new ROM.
If you still want to do that, stick to a PC with XP installed (no vista!).
If you did reflash a good ROM into your HTC you'll be one step closer to upgrading your ROM.
Read this post thourougly :
http://forum.xda-developers.com/showthread.php?t=298613
as this will help you in case you didn't CID unlock your device.
(thanks vippie; this is the clearest walktrough i could find!)
If you are really sure you CID unlocked your device, you can flash your device to any ROM you think is useful to you.
If your device is really CID unlocked, you should be able to flash any ROM that is posted on this forum.
I know that it is that easy, because i have tried every WM6 ROM that is posted on this forum
good luck, and i hope in the end you will have the ROM that you want....

thanks. my device IS CID LOCKED and i've tried to flash it from 2 XP machines so it is looking like its a brick thanks anyway.
for sale wizard with pretty 3 colour screen - sold as seen!!!

One thing you can try is use another USB to mini USB cable, i have had one cable that didn't connect really well.
Sometimes it worked but if i moved my phone the connection went down.
I just thought of that because it was a while ago that this happened - I threw away the faulty cable and had no problems after that.

tried 3 different cables too

knownuser said:
tried 3 different cables too
Click to expand...
Click to collapse
How much do you want for it? I need a new screen and body shell!

jabreu203 said:
How much do you want for it? I need a new screen and body shell!
Click to expand...
Click to collapse
was actually kidding i'd like to fix it but i'm open to offers PM me.

ok .....HELP
i've paid for the CID unlock which went well i then tried to flash the O2 default rom failed error 101 (connection) i then tried wizard love failed error (300) in italian.
so stage 2 was to use the sd card recovery i ran the utility and then followed the instructions r2sd all etc..all seemed fine i restored the image to the wizard and rebooted it still won't go past the splash screen i've tried re-flashing and hard reset still no go....please guys any help???

If you have a memory card take it out. Right click on ActiveSync and go to connection settings. Uncheck allow usb connections then try to flash. With windows XP...

tried to flash on a win2K machine (4 pc's thats the only one thats not vista) still get error 101 on the original O2 rom and 300 on the wizard love rom.
still no joy anyone have any ideas???
http://www.t-mobile.hr/mdasw/RUU_Pro...R_WWE_Ship.zip fixed i'm on a tmobile rom i'll try downgrading again.

Updating radio - Disconnects From ActiveSync During SPL Mode

I have been trying to update my ROM lately with a new Radio and have been having one issue. Whenever I run the update utility, the screen will enter SPL Mode (all white) like it should, but when it enters SPL mode the activesync connection is lost, every time. I cannot get it connected again until I reboot the phone back into wm6, and then it connects to activesync just fine.
How can I get it to stay connected long enough for me to flash?
So to begin, when I want to update the radio, I should be able to update it in the same way I install a new ROM, correct? I use a SoftSPL file I found here and simply copy main file into that folder and then run start-SPL.
Anyone else experience this? It just seems to always disconnect and cause errors right before it updates the ROM.
The only thing that I can think of that could be causing it is the phone fell in some water for a couple seconds about a week ago. It's been drying out and seems to run ok again as of today. I was able to flash the ROM a couple times, so I know it's possible to flash. It took a couple of tries, but eventually did flash. However, I've tried about 10 times for the radio only (2.71.11) and it won't work.
Any ideas, other than it cannot be fixed due to water damage?
Note: I was just able to flash back to the cingular stock ROM (was using Jaguar 4.0). The stock ROM always seems to flash easily without difficulties - can unofficial ROMs not be flashed in the same manner? Just an .exe file that takes care of everything and never has activesync issues? It's flashing the stock ROM as I type, and it does not show the activesync connection is active. It was at first, but was lost (or appears so, anyways) as the flash began. The stock ROM is much easier to flash in my opinion and hasn't given me difficulties thus far, although other ROMs used to flash easily as well - not so much now.

Superman859 said:
I have been trying to update my ROM lately with a new Radio and have been having one issue. Whenever I run the update utility, the screen will enter SPL Mode (all white) like it should, but when it enters SPL mode the activesync connection is lost, every time. I cannot get it connected again until I reboot the phone back into wm6, and then it connects to activesync just fine.
How can I get it to stay connected long enough for me to flash?
So to begin, when I want to update the radio, I should be able to update it in the same way I install a new ROM, correct? I use a SoftSPL file I found here and simply copy main file into that folder and then run start-SPL.
Anyone else experience this? It just seems to always disconnect and cause errors right before it updates the ROM.
The only thing that I can think of that could be causing it is the phone fell in some water for a couple seconds about a week ago. It's been drying out and seems to run ok again as of today. I was able to flash the ROM a couple times, so I know it's possible to flash. It took a couple of tries, but eventually did flash. However, I've tried about 10 times for the radio only (2.71.11) and it won't work.
Any ideas, other than it cannot be fixed due to water damage?
Note: I was just able to flash back to the cingular stock ROM (was using Jaguar 4.0). The stock ROM always seems to flash easily without difficulties - can unofficial ROMs not be flashed in the same manner? Just an .exe file that takes care of everything and never has activesync issues? It's flashing the stock ROM as I type, and it does not show the activesync connection is active. It was at first, but was lost (or appears so, anyways) as the flash began. The stock ROM is much easier to flash in my opinion and hasn't given me difficulties thus far, although other ROMs used to flash easily as well - not so much now.
Click to expand...
Click to collapse
First,You don't have to flash Radio Rom using 'SoftSPL',its an EXE file,it'll flash straight like an official stock rom,as it doesn't contain any IPL/SPL in it,it won't effect the bootloaders and the phone,its safe to flash to any device,G3 or G4,just connect your phone with pc via usb cable and run the Ruu included in the Radio Rom,it'll start to upgrade.
Secondly,YES! official stock Roms are easy to flash,cuz it contains official G3/G4 IPL/SPL included in them,it doesn't require CID unlocking the phone,whereas,custom build wm6 Roms require the phone to be CID unlocked and doesn't include IPL/SPL in it,so a G4 device cannot be CID unlocked,therefore,using 'SoftSPL' or 'HardSPL',its tricked into temporarily CID unlocked status,but actually its not CID unlocked.Hope its clear now

zabardast_1 said:
First...
Secondly...
Click to expand...
Click to collapse
Man.. it is clear enough, but dude, you didn't tell how am I able to proceed with the ROM upgrade when the activesync issue occurs everytime I try to upgrade.
I am a total newbie on this and I am having the saame problem in here.

SE Updater failed to install new rom, what is the best thing to do now?

Hello,
I know you guys got some excellent walkthroughs, roms, programs and threads where you've helped a lot of people out but I could really use some personal feedback. I had hoped to fix my phone using one of the excisting threads but unfortunalty I can't get it to work with those.
My problem is one I've seen more of in here, I used the SE updater and it froze at 53%, I did what the program said, reconnected and it froze again at 12%, and again, again, etc. So I disconnected thinking it might be a bad USB port. But then the updater didn't recognise my phone at all. So I used the mtty program suggested in some of the threads and I got past the red/green/blue screen but now it's stuck at the Sony Ericson logo, as if WM6.1 is gone.
This is what the red/green/blue screen currently states:
KOV110
SPL-0.78.0000
MicroP1-787
MicroP2-707
From what I gather this means I can't flash roms, right? I tried making it a hard-spl but when I use the tool it says it can't connect.
So is there anyway to get a rom on it and bring it back to life?
Thanks inadvance!

Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards

meska said:
Get an original rom from here : http://forum.xda-developers.com/showthread.php?t=475482
copy .nbh file from the package onto your sd card and rename it to : Kovsimg.nbh then bring phone into boot loader via : vol down + power.
It should flash the rom now. i the problem is still present after that you
have to deal with mTTy but first try the flash...
i think you could also bring phone into bootloader without sd card inserted then connect usb cable, display should now print 'USB',and after that start rom update utility.
regards
Click to expand...
Click to collapse
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.

Ronnet said:
Thank you for your reply, I will do as you said although I've already tried something similiar to this. I believe the problem was that I couldn't flash roms from my SD since I don't have the hard SLD. But I will try it anyway as soon as I get home.
In the mean time I would love to hear more ideas about how to fix my phone.
Click to expand...
Click to collapse
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.

original roms will still work with original spl... but nevermind =P

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
My phone can still power on in the sense that it shows the Sony Ericson logo or that I can access the three collor screen. But it won't launch WM6.1. I also have a problem with updating to hard DSL. It does recognise my phone because without it connected the program finds nothing and with the phone connected it wants to start updating. It says ''updating from image version: (emply) to image version: 1.00.X1 Ipress next and it opens a progress bar on both my X1 and the PC. But it never goes beyond 0% and then gives me an connection error. I think it has something to do with not being able to get passed the Sony Ericson logo. I mean the hard-DSL program does recognise my mobile but activeSync is never active because my PC doesn't recognise a WinMobile phone (since it wont go past the Sony Ericson screen)

meska said:
original roms will still work with original spl... but nevermind =P
Click to expand...
Click to collapse
Really? That might fix my device then. Could you suggest a rom from the long list? Perhaps one that works on all versions? Because I'm dutch but my mobile has always been in english so I'm not sure what rom version I had. Except that it was identified as an R2 Rom by the Sony updater before it killed my X1...

Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
I'm now downloading the initial dutch R1 firmwire, could that one work?

Mopral said:
Go here
Find the latest stock rom for your country (and perhaps your carrier) and flash it
No need to have Hard SPL for that
Click to expand...
Click to collapse
Alright so I got an R1 original rom (I now realize that the R3's were originals aswell) and it worked! I'm not sure if it was the different rom or the formatting with FAT32 that did but it works again. So I'd like to thank everyone who was kind enough to reply.
The device is incredibly slow now but now I can use the hard-DSL installer, right? DOes anyone have a suggestion for a good rom to use?

laurence0609 said:
You really need have to flash the HardSPL first as, based in your above post, you still have not done that. It will be useless to flash cooked ROM with that. If you can still power on your phone and you have an activesynch in your computer, i suggest you download the HardSPL first and update your phone using your PC. If you are successful doing that, then you can flash all you want.
Click to expand...
Click to collapse
DON'T hard-spl if you're going to flash a stock ROM. And especially if you're going to use SEUS.
Try flashing the R3A first. The R1s are way slow, as you've seen.

Possebly Bricked my Diamond, PLease Help

Dear Readers,
I have a few concerns about my recently bought Htc diamond.
The problem is that during bootup it stays frozen on the Touch Diamond bootscreens.
It has HardSPL Olinex v1.93 on it.
First i flashed back to the Stock Rom, worked fine only a couble of unexpected freezes wich made me think into using Mtty(set 14 0, task 29, task 8) to fully clear the phone and than reflash the NLD rom back on it.
Now flashing the rom went al the way 100%, and Congrats me after that.
I rebooted after that but never goes past the bootscreen with the red info lines.
So i thougt that restoring the SPL 1,93 olinex to factory setting might do the trick. But there is no way to do that since i cant get active sync to connect!
My problems is that although i can acces all bootloadmethods ,the phone is being recognized through USB, and all Rom/SPL flashes goes up to 100%. It still doesnt seem to save that rom on its memory.
and when i check the screens of the CustomRUU program it doesnt show any info add the older software version, only shows the info of the rom wich im going to flash.
If i check the USB icon on the task bar while connected to the pc, it says something like ..Qualcomm CDMA.. etc. ! the phone wasnt a CDMA version!
Any ideas?? is it Fixable or do my cats have something new to chew on??
many thanx,
Jeffrey

Copy any ROM you want to your Internal Storage, rename .nbh to diamimg.nbh, Restart your diamond and than immediately press Vol Down and back button, once in a bootloader press power button to flash rom, once finished restart Diamond, and see if ROM will be installed successfully

benko286 said:
Copy any ROM you want to your Internal Storage, rename .nbh to diamimg.nbh, Restart your diamond and than immediately press Vol Down and back button, once in a bootloader press power button to flash rom, once finished restart Diamond, and see if ROM will be installed successfully
Click to expand...
Click to collapse
Dear Benko,
How can i get acces to the internal storage?? Since the phone doesnt boot far enough to get connected in Active sync... are there other methods to acces the internal storage?
The USB trigger mode didn't work either as its not recognizing any flashdrive i connencts to it..

http://forum.xda-developers.com/showthread.php?t=540290
Especially this post:
http://forum.xda-developers.com/showpost.php?p=4194865&postcount=4

divxmaniak said:
http://forum.xda-developers.com/showthread.php?t=540290
Especially this post:
http://forum.xda-developers.com/showpost.php?p=4194865&postcount=4
Click to expand...
Click to collapse
What to do with this link??
I got Mtty running but i cant acces internal storage to copy a rom to it, and flashing by USB went all the way 100% but somehow the phone never boots in to the flashed rom.
Even trying a reflash doesnt show any signs of an older Rom being present on the phone memory..
One question about Mtty, when its said to use the ROM flasher i kinda assumed they ment the CustomRUU program. Am i right, or is there some build-in command to Flash a ROM within MTTY??

jvanzeijst said:
What to do with this link??
I got Mtty running but i cant acces internal storage to copy a rom to it, and flashing by USB went all the way 100% but somehow the phone never boots in to the flashed rom.
Even trying a reflash doesnt show any signs of an older Rom being present on the phone memory..
One question about Mtty, when its said to use the ROM flasher i kinda assumed they ment the CustomRUU program. Am i right, or is there some build-in command to Flash a ROM within MTTY??
Click to expand...
Click to collapse
i had the same problem.... i send it back to repair... had a hardware damage. Luckily i got it for free...
I don´t know if you have exactly the same problem, but it looks like that.

LORDShadowMan said:
i had the same problem.... i send it back to repair... had a hardware damage. Luckily i got it for free...
I don´t know if you have exactly the same problem, but it looks like that.
Click to expand...
Click to collapse
Well lets hope not, because i got mine for 50euro secondhanded, warenty is expired and im really not keen on spending more money on repair than what i paid for.

Have you tried to put another Radion on it?

dravik said:
Have you tried to put another Radion on it?
Click to expand...
Click to collapse
Actually yes i did and it doesnt make any difference.
The weird thing is that even after succesfull flashing both Harspl and Rom never seems to stay on the phone memory but the Radio get updated.

jvanzeijst said:
Actually yes i did and it doesnt make any difference.
The weird thing is that even after succesfull flashing both Harspl and Rom never seems to stay on the phone memory but the Radio get updated.
Click to expand...
Click to collapse
I had a problem with my phone where I did mtty, but forgot to rename the diamimg.nbh file on my phone. So it wouldn't get passed the bootscreen.
My solution was to connect the phone to the usb, hold down the up arrow(I think it was the up arrow) and soft-reset. It came up with those 3/4 color blocks and said "usb" at the bottom. I then used the official htc ruu(also didn't show the current rom on it) to flash the normal htc rom onto it and it worked. Then I just did the normal procedure to get the custom rom on again.
So are you trying to flash the original HTC rom onto it, or a custom rom? Cause if it's a custom ROM, maybe it's just the radio, not the actual OS?

moreph34r said:
I had a problem with my phone where I did mtty, but forgot to rename the diamimg.nbh file on my phone. So it wouldn't get passed the bootscreen.
My solution was to connect the phone to the usb, hold down the up arrow(I think it was the up arrow) and soft-reset. It came up with those 3/4 color blocks and said "usb" at the bottom. I then used the official htc ruu(also didn't show the current rom on it) to flash the normal htc rom onto it and it worked. Then I just did the normal procedure to get the custom rom on again.
So are you trying to flash the original HTC rom onto it, or a custom rom? Cause if it's a custom ROM, maybe it's just the radio, not the actual OS?
Click to expand...
Click to collapse
I tried both custom and Stock Roms several times. After flashing the Stock roms i noticed that the radio version get updated, just no OS to boot!
Since the flashing sequence completes to 100%, i think its strange that the os doent seemed to be copied at all. Is there a possibility that a bad SPL is causing the OS not to be found?? In the Bootloader it still says SPL v1.93 Olinex so i guess its still Hard spl'ed. But when i try connect the phone to pc by usb, it shows up as Qualcamm CDMA device then later changes to HTC...
The Phone is not a CDMA version but i think maybe there is a change that somehow a CDMA SPL accidentlly got uploaded to it. This supposed to cause a phone to brick.
Many thanx for trying to help!

jvanzeijst said:
I tried both custom and Stock Roms several times. After flashing the Stock roms i noticed that the radio version get updated, just no OS to boot!
Since the flashing sequence completes to 100%, i think its strange that the os doent seemed to be copied at all. Is there a possibility that a bad SPL is causing the OS not to be found?? In the Bootloader it still says SPL v1.93 Olinex so i guess its still Hard spl'ed. But when i try connect the phone to pc by usb, it shows up as Qualcamm CDMA device then later changes to HTC...
The Phone is not a CDMA version but i think maybe there is a change that somehow a CDMA SPL accidentlly got uploaded to it. This supposed to cause a phone to brick.
Many thanx for trying to help!
Click to expand...
Click to collapse
Ok, maybe you can try from scratch to re-flash everything?
You should still be able to HardSPL, by doing the soft-reset+vol down thing.
I'd suggest getting the HardSPL from here(I only used it once, but I know it worked for me):
http://forum.xda-developers.com/showthread.php?t=416211
Hopefully that alone is what you need but if it isn't, you should then be able to flash a radio onto the phone(there's a link in that thread too) and then the stock HTC rom(I think the stock would have a better chance than anything else)
All of those flashes should be possible by doing the soft-reset+vol down and then using the RUU. Do you know how to use the RUU to flash a HardSPL, Radio and then OS separately?
you should probably try a full mtty just before you flash the OS(just after you flash the radio) as well, do the set 14 0,task 28 and task 29 and then task 8
And regrading Windows picking up your phone as a CDMA, I can't remember what mine said, but I don't think you should worry much about what Windows thinks the phone is.
*Edit, you should follow the mtty guide here for the most part:
http://forum.xda-developers.com/showthread.php?t=540290
But the second last step(number 7) where you're required to remove the usb cable, soft-reset+vol down+back button to flash from the internal storage, you should keep the phone connected to the usb and soft-reset+vol down and flash the rom using the RUU

message deleted

moreph34r said:
Ok, maybe you can try from scratch to re-flash everything?
You should still be able to HardSPL, by doing the soft-reset+vol down thing.
I'd suggest getting the HardSPL from here(I only used it once, but I know it worked for me):
http://forum.xda-developers.com/showthread.php?t=416211
Hopefully that alone is what you need but if it isn't, you should then be able to flash a radio onto the phone(there's a link in that thread too) and then the stock HTC rom(I think the stock would have a better chance than anything else)
All of those flashes should be possible by doing the soft-reset+vol down and then using the RUU. Do you know how to use the RUU to flash a HardSPL, Radio and then OS separately?
you should probably try a full mtty just before you flash the OS(just after you flash the radio) as well, do the set 14 0,task 28 and task 29 and then task 8
And regrading Windows picking up your phone as a CDMA, I can't remember what mine said, but I don't think you should worry much about what Windows thinks the phone is.
*Edit, you should follow the mtty guide here for the most part:
http://forum.xda-developers.com/showthread.php?t=540290
But the second last step(number 7) where you're required to remove the usb cable, soft-reset+vol down+back button to flash from the internal storage, you should keep the phone connected to the usb and soft-reset+vol down and flash the rom using the RUU
Click to expand...
Click to collapse
Allright i'll give it another try..
keeping my fingers crossed!

moreph34r said:
Ok, maybe you can try from scratch to re-flash everything?......
Click to expand...
Click to collapse
Ok i tried its flashing the Stock HTC NLD rom now aroun 42.. 43%, its slow but atleast still going. This is a big Rom tough.
Two questions:
1. Flashing the hardspl took some time to initiate the progression bar and then suddenly in the blink of an eye from 0 to 100%,
after flashing the hardspl file wich showed in RUU as olinex v 1.40, it still showed SPL.193 olinex on the bootloader.. .. is this common??
2. Is it even possible to downgrade a bootloader?? i would love to have olinex 1.40 back.. i used it before and it worked fine on many roms...i keep thinking my SPL is the problem.
Bye now the Rom flashing finished and it didn't help.. its still frozen.
here is the output from MTTY, may be its usefull:
----------------------------
Cmd>set 14 0
HTCST ÚÈÒHTCE
Cmd>task 28
Format start
Fill RSVD information for block 288 to 321
Storage start sector=0xFF40, total sector=0xB080
Storage start block=1054, total block=706
Total Bad Block in CE: 0
Erase physical block from 1344 to 2032
si backup: Erase physical block from 2032 to 2048
Format end
Cmd>task 29
Format BINFS start
Fill RSVD information for block 288 to 321
CE start sector=0x14, total sector of CE and TFAT=0x14
CE start start block=321, total block=1727
Write 0xFF start page=0x5040, total page=0x1AFC0
Format BINFS end
Cmd>task 8
-------------------------------------
,thanx any way

Did you use the corresponding stockRom (the one with the corresponding spl i mean):
_QMR_RUU_Diamond_HTC_NLD_1.93.404.1_Radio_Signed_Diamond_52.29.25.12_1.00.25.05_Ship
Just in case you didn't, you can find it over here:
http://wiki.xda-developers.com/index.php?pagename=Diamond_Upgrades

Yes i did try, didnt work for me..
i kinda lose hope now.
Losing a phone sucks, first lost my iphone3g then bought this cheap as a replacement for the remaining contract, And now i really regrets that i tried restoring its stock rom,radio,spl since its really did brick the phone for good..
thanks for all the people that tried to help but i'm not sure if its fixable....
So thanx anyway..
yours,
Jeffrey

Mod. edit: not dev related, moved to general
gl though

[Q] Flashing TD2 (Topaz) stays at 0% help please!!!

Hi all
I really need some help please!!
I think I have read and searched and tried steps by step all the posts and threads on this, none of them work for me,
Ive flashed my HD2 & TD2 with HSPL, radios and roms many times in the past. I have a stock rom on my TD2, (havent flashed a cooked one yet but did on my HD2 and worked great),
the problem is when I try flash anything, (HSPL,Radio's and Roms)
I connect with WMDC on windows ultimate 64x and go through all the steps, the phone disconnects from WMDC when loading the tri-color screen, and installs the HTC sync drivers fine, and then (my problem) it hangs on 0%. this happens regardless of what I'm flashing after a while brings up the communication errors 208 & 260. this doesnt have any effect on the software HSPL or radio as a soft reset returns back to the homescreen just fine. I am running HSPL 1.8.3. , radio 4.49.25.17 and a shiped stock wm 6.5.
This is what Ive tried so far:
I have used 3 different micro USB cables,
updated my .net fx to 4.1
I have tried different Ruu's such as custom Ruu, Ruu from topaz, Ruu, supplied with Hspl, flashes center and KaiserCustomRUU.exe and a few others.
Ive tried the white screen fix many times. including the SDA unlocker and stuff.
I ve tried manual and automatic.
tried entering the the Tri-color screen manually and via the Ruu.
I tried different computers and different operating systems (W7ultimate and XP 32Bit and 64Bit)
tried active sync WMDC 6.0 and 6.1
Ive removed the SD card and sim and have tried flight mode
Restarted pc's mobile any reinstalled WMDC many times.
Ive tried renaming to the HSPL, radio and Rom to TOPAIMG.nbh , put 1 by 1 on formated fat32 SD card, run from Tri-color menu. all of them just hang on
loading....
Have tried mixing and matching Ruu's with HSPL's, Roms And radios and everything else i can think of, after 18 hours of this I am fed up and decided i need some help
Thanx in advance

can some1 please help on this?

ok
i have now download the official RUU_Topaz_S2_HTC_WWE-AFK_2.53.421.3_Radio_Signed_Topaz_61.44etc.25.35_4.49.25.91_Ship.exe Rom
and it worked with no problems.
it updated my HSPL from 1.83 to 2.51 and radio version to 4.49.25.91 which was exactly what i was going for.
The problem now is that i still cant change my HSPL, RADIO or flash a custom Rom which is what I need. it hangs on 0% and now gives me a 262 error which states that:
ERROR [262] : UPDATE ERROR
This error occurs during the CE ROM code upgrade process. If this happens, you can just soft reset the device and run RUU again. The update process will then continue. At this stage the rom on the device is incomplete and it will not boot back up into Windows. You will need to place it into the bootloader to continue.
which is not true as if a reboot it doesn't continue the update and just returns to the home screen as normal
help?

Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.

prabhat said:
Now as your device is updated (officially)... so now can you try installing HSPL from here: http://forum.xda-developers.com/showthread.php?t=520312
Thanks.
Click to expand...
Click to collapse
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work

IcedXian said:
Yes thanx i have. it was the first think i tried after i flashed the official HSPL, still doesnt work
Click to expand...
Click to collapse
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.

prabhat said:
Does your device is CID/SIM Locked? If yes you may have to try this first:
Diamond 2 CID/Security/SIM Unlocker. And then HSPL.
Click to expand...
Click to collapse
how do i check if it is locked?

IcedXian said:
how do i check if it is locked?
Click to expand...
Click to collapse
Try other network SIM and see if that is working?

prabhat said:
Try other network SIM and see if that is working?
Click to expand...
Click to collapse
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems

so how do i marked this thread as solved????

OK Good Cheers!!!
Now enjoy any ROM you want and have fun .
You can append the post title with "[SOLVED]".
Thanks.

IcedXian said:
Than x alot for your help dude!
just got it right now, didnt have internet so i coudnt make use of the automatic flash with Topaz-HardSPL_V5_09R6.
this error occured when using the manual. i got internet now and used the automatic flash and it worked like a charm.
thanx again will be in contact if i have any other problems
Click to expand...
Click to collapse
Brother explain more, how you solved your problem... I am also facing problem my room update also stuck at 0%..... what do you mean by "get internet"? and why you need it? and on which you get it mobile or pc?.......