unable to install new rom : even after SIM and Cid unlocking - P3600 Software Upgrading

HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..

shankyo said:
HI ,
plz help me i;m unable to upload new rom ..
i have a hard spl by oliver installed , then i try to upload a new win 6.1 rom it doesnt go futher stops in 0 and later says recovery and same again..
i tried both on vita and xp but was unable to upload new rom...
plz help me as i have follwed the instructions and have done cid unlosk and sim unlock along with flashing hard spl ...
i have no problems doing this but cant relly understand y only when flashing win 6.1 rom it doesnt let me do it..
Click to expand...
Click to collapse
i have the same problem.somehow my p3600 radio is deleted.and now when i power on. it says NO GSM in start and then stuck on windows mobile 6.1 logo .
i installed new roms without Radio again stuck on start up logo.
whenever i installs radio rom it stucks on 13%.
i tried sdcard meathed it stucks on Gsm(Radio).
SO THE PROBLEM IS RADIO

Related

upgrade version failed using shelltool ..pls help !!!

hey i'm an newbie , so please take it easy on me .
i have wizard , G4 version .
i tried to flash my WM5 to WM6 ( touchflo NBD ) using the software shelltool.
so i did everything i was supposed to , installing the cabs files and on .
but when i flash to the new version , it's disconnected while saying it's finished ( finished to write the rom ) . this was after 9 minutes - and i thought that's because i have good computer .
anyway , i hard rest my wizard - but it's get stucked on the splash screen of orange with all the version of SPL IPL .
now i get real stupid , cause i didn't know what to do , so i enter to the bootloader and tried to flash again with the shelltool while my wizard at bootloader status .
right now it's in the middle of writing the new version , but it's been more than 40 minutes , i'll guess i'll unplugged the cable cause it will stay like this for hours.
is there anyway to fix what i have done ?
please help me out !!!!
i don't know nothing about fixing the wizard with bootloader and stuff, so i need an guide .
hope for an answer thnx everyone
Same happened here. How i fixed. Downloaded wizard love rom. Get into bootloader. connect cable get usb connection. no active sync needed. Flash using RUUgetinfo file from love rom folder. not using shell tool. wait till finish. reinstall both cab files and reset. now use shell tool to flash to your choice rom. give it at least half hour to run. before disconnect even if it says program not responding. hope this helps....
yeah , i did the same and it's work .
too bad i didn't see your answer before 4 hours , i didn't sleep because of that.
by the way , wizard love is WM5 or WM6 ?
i tried to flash to black diamond and to NBD but with no luck , it's never end flash even after 2 hours !!!!!
is there any way to flash without shelltool ? maybe through RUU ?
please help us getting those flash on our wizards
You can't flash with RUU on a CIDLocked G4 That's why we want it so bad (cidunlocking )
heheh alright , so how come i can flash with RUU the wizard love edition ?
and is there any way to slove the problem with shelltool program ? cause everytime i'm flashing an rom , it's never end ...

Wizard ( K-jam ) i-mate Splash screen freezing

Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
GSM system said:
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
Click to expand...
Click to collapse
hi
Plz be specific from where did u download the official rom,which u said u tried to flash.was it from official i-mate club ftp site and what was the version of the rom u tried to install,cuz they don't have any upgraded version on this site apart from the last wm5 dated year 2006. i-mate is not offering any wm6 upgrade to any of its products.
secondly, which other rom u tried to flash afterwards?
as far as ur attached pics r,if u can reach to this screen than do not worry about the upgrade info,as it's sometime displayed and sometimes not,just hit the upgrade.
if it completes than it's alright,but if it stucks for a very long time and displays any error message.it means it has not upgraded.
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
GSM system said:
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
Click to expand...
Click to collapse
Goodluck,If it upgrades successfuly do let us know,
Btw, it's an ;ld wm5 Rom,why don't u upgrade to newer wm6 Roms ?
Brother ....the Same problem ...So what i don't you have another solution ..please
br
GSM system said:
Brother ....the Same problem ...So what i don't you have another solution ..please
br
Click to expand...
Click to collapse
ok,first plz post the exact details of ur k-jam,
1.IPL.....?
2.SPL....?
3.GSM...?
4.OS ver? ( Arabic or WWE)
secondly,tell what exactly happened and what error r u getting.
thirdly,what u want to upgrade to,I mean Arabic or English version of Rom ?
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
GSM system said:
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
Click to expand...
Click to collapse
ur phone's ipl/spl 2.16,it's a AKU 2 version,therefore check the rom with which ur trying to update shud also be aku2.the update rom shud be newer than the one already on ur phone.
So what i doing Now can you fined to me any solution plz ...
br
GSM system said:
So what i doing Now can you fined to me any solution plz ...
br
Click to expand...
Click to collapse
can you tell what exactly is the problem you are having at present is it that:-
1. you are not able to complete flash,it stops and give some error,if so then what error it shows ?
2.RUU starts to flash,but when it comes to the screen where it verifies the updating rom's info,there you don't see any info,as per your first post,than you discard the update?
3. is the version of the rom newer your are trying to update with then the one already on your device
plz verify these ?
Brother ... i am Sorry to bother you ..
1-about the flash my device is complet flash and the Computer tell me 100% congratulation .
2- the device don't accept factory Default
3- my device is freezing on splash screen. i-mate
many thanks ..
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
GSM system said:
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
Click to expand...
Click to collapse
Ok,lets try this way out,try to do a hard reset,to perform hard reset :-
1. Press and hold the Comm Manager button and Voice Command button on the device,than
2.While keeping the two buttons pressed with one hand, and at the same time,with other hand,use the stylus to lightly press and hold the soft reset button.
the device will reboot and restart again,see if it starts to work alright.If still freezes at the splash screen,than I'll suggest you do this,it really sometimes help and I have solved my problem so many times by doing this :-
Reboot your PC, run disk clean on Drive C:\,delete all the Temporary internet files,Temp files rather check mark all the options in the disk clean wizard option and hit ok,this will delete all the junk files from your PC,now delete all the cookies in the internet options,after doing all this,switch on your phone and go into Bootloader mode(tri color screen),when there than connect your phone to the pc using usb cable but don't active sync your phone,cancell active sync if need be,when you connect your phone with pc via usb,look at the screen of your phone you will see a little usb shown at the bottom of the screen.
Now open the rom which you downloaded and execute the Ruu..,it will start to flash,let it complete ,it will confirm flash and reboot,it start now and work normal, I hope,it will solve this problem remember don't do anything else with the pc like browsing the web or reading e-mails,playing games or working on Microsoft office,don't touch you pc and phone while the rom flashes.
Well,there is another way also,but as you want the official arabic version rom on your phone,do it first as i told you above,if it works,good,otherwise we will do the second method good luck
Amazed !
Hmmm, sry to say I observed you joined this forum on Dec,2006 and posted 57 times,just went through your posts and was amazed that you already have gone through this unlocking and upgrading on different devices,well you seem to have quite knowledge about all this,than how come you are stuck with this problem now ?
I hope your not just kidding me ? or your are really stuck up and seeking help ?
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
GSM system said:
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
Click to expand...
Click to collapse
ok, what is the present status of your phone ? what ipl/spl...? it shows in bootloader mode ?
as you posted in another thread that you tried to flash wizard_love_rom,but did not succeed,earlier you only wanted to upgrade to an official arabic i-mate k-jam rom.Now do you want to upgrade to any rom ? by unlocking the phone ? or just want your phone to work by any means ? if yes,then there's another option to get your phone working,I really hope so.Plz confirm what you want to do now ?
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
GSM system said:
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
Click to expand...
Click to collapse
ERROR [294] : INVALID VENDER ID
these error messages appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device.
Well, as I can think,you had an Arabic rom version OS 2.16.9.1 Arabic on your phone before and tried to flash a wwe version rom.the bootloaders verified and did not accept the rom.So a bad flash and splash screen got freezed,the only way is to flash and try to downgrade to IPL/SPL 1.xx and CID unlock the device and upgrade to another rom to start working, or flash the official stock Arabic rom to bring back the phone to it's default status,but the official rom you downloaded and tried to flash was of the same OS version didn't flash correctly and got splash screen stuck.Therefore,the only option left at present is to try and downgrade it to IPL/SPL 1.xx.The options are :-
1.Try to flash again button's rom 'CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe ' Which you already have with you,a couple of times more and see if it might work,
2.Otherwise download this rom from the link below and flash,hope it'll work :-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
If successful,good,but if still fails,
3.there's still another option to flash the rom with replaced 'Romupdateutility' in the rom,which I'll explain how to do it later,
first try the option 1 & 2,lets hope it works,good luck
brother Many Thanks ..
I will do that and tell you ...also please if you can explam me how to flash the rom with replaced 'Romupdateutility'.....
respactfully
My friend Zabardast_1
please look this is the info befor i Downgrading with this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
now my device in Bootloader
IPL 2.16
SPL 2.16 ..
okay .... now i starting to downgrading ...my Device with this ROM CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
please note this pic i attached to you ... then after downrading ...this is my device info in bootloader .
IPL 1.01
SPL 2.16
now after i downgrading no thing happend just the splash screen change also i acctached to you image to see that ...
2nd step i tryed to flash my Device with this ROM Wizard_Love_2.26.10.2_WWE_Novii_CF2 what happend ( Error 300) also i attach to you image
now i wait your help ..please
respactfully

no gsm on boot

hi all,
i am having a problem with the trinity i unlocked sim with a tool i found here and then upgrade rom to 6.1 using hardspl 1.30 by oli till now everything is fine and working i decide to upgrade the radio rom and the flashing went 100% but when the device rebooted it was showing no gsm and it would start windows and get stuck in windows loader i tried to refalsh spl to 1.2 to des and always flashes 100% but 1.30.olipro stays tried to reflash with every radio rom i found for trinity and always flashes 100% but still no gsm i tried os cooked and official but with no avail. i found the original spl 1.06 but its .bin any one know how to load it on the device.? i found too some other people with same problem but i cant find any solutions i checked the device with mtty there is no bad blocks but when i do checkimage it gives me a error on radiorom checksum timeout..... does anyone has a solution for my problem please ? any help would be really appreciate it !!!!
no GSM FIX
hi all to all of you who have my same problem ... after hours and hours hours of searching and trying to find a solution i manage to get trinity back working ehat i did i used this tool attached found here on xda. its made by POF which i thank very much!!! i used it and downgraded the spl to 1.2 olipro after i could flash ant radio rom..... and was back in the game!! hope this could help you all who have the same problem
Hi thanks for this info I have the same prob. Would you plz tel me which ROM did you use to revive your trinity.
thanks
hi,
i have the problem of no gsm ...i download your tools but i dont khnow how to use them ...pleas help me ...
sorry for my english

Bricked Wizard

sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!

trin100 D810 HELP!!!

please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...

Categories

Resources