Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
GSM system said:
Dear all...
i have i-mate k-jam i try to upgrading with Official rom the devise is accepted upgrading but after complet freezing also i try to do another upgrading but i see this information i attached the pic cuz i don't see any info .....to upgrading
respactfully
Click to expand...
Click to collapse
hi
Plz be specific from where did u download the official rom,which u said u tried to flash.was it from official i-mate club ftp site and what was the version of the rom u tried to install,cuz they don't have any upgraded version on this site apart from the last wm5 dated year 2006. i-mate is not offering any wm6 upgrade to any of its products.
secondly, which other rom u tried to flash afterwards?
as far as ur attached pics r,if u can reach to this screen than do not worry about the upgrade info,as it's sometime displayed and sometimes not,just hit the upgrade.
if it completes than it's alright,but if it stucks for a very long time and displays any error message.it means it has not upgraded.
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
GSM system said:
Many thanks .....zabardast_1 ..
i upgrading ..with this rom K-JAM_Arabic_2160901_21609102_20710_ship... thanks
Click to expand...
Click to collapse
Goodluck,If it upgrades successfuly do let us know,
Btw, it's an ;ld wm5 Rom,why don't u upgrade to newer wm6 Roms ?
Brother ....the Same problem ...So what i don't you have another solution ..please
br
GSM system said:
Brother ....the Same problem ...So what i don't you have another solution ..please
br
Click to expand...
Click to collapse
ok,first plz post the exact details of ur k-jam,
1.IPL.....?
2.SPL....?
3.GSM...?
4.OS ver? ( Arabic or WWE)
secondly,tell what exactly happened and what error r u getting.
thirdly,what u want to upgrade to,I mean Arabic or English version of Rom ?
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
GSM system said:
brother .....the first many thanks to you
this is the Device inf
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
thanks i wait your post
Click to expand...
Click to collapse
ur phone's ipl/spl 2.16,it's a AKU 2 version,therefore check the rom with which ur trying to update shud also be aku2.the update rom shud be newer than the one already on ur phone.
So what i doing Now can you fined to me any solution plz ...
br
GSM system said:
So what i doing Now can you fined to me any solution plz ...
br
Click to expand...
Click to collapse
can you tell what exactly is the problem you are having at present is it that:-
1. you are not able to complete flash,it stops and give some error,if so then what error it shows ?
2.RUU starts to flash,but when it comes to the screen where it verifies the updating rom's info,there you don't see any info,as per your first post,than you discard the update?
3. is the version of the rom newer your are trying to update with then the one already on your device
plz verify these ?
Brother ... i am Sorry to bother you ..
1-about the flash my device is complet flash and the Computer tell me 100% congratulation .
2- the device don't accept factory Default
3- my device is freezing on splash screen. i-mate
many thanks ..
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
GSM system said:
Hiii ...
my Device Stell dosen't work Freezing So please what i doing
br
Click to expand...
Click to collapse
Ok,lets try this way out,try to do a hard reset,to perform hard reset :-
1. Press and hold the Comm Manager button and Voice Command button on the device,than
2.While keeping the two buttons pressed with one hand, and at the same time,with other hand,use the stylus to lightly press and hold the soft reset button.
the device will reboot and restart again,see if it starts to work alright.If still freezes at the splash screen,than I'll suggest you do this,it really sometimes help and I have solved my problem so many times by doing this :-
Reboot your PC, run disk clean on Drive C:\,delete all the Temporary internet files,Temp files rather check mark all the options in the disk clean wizard option and hit ok,this will delete all the junk files from your PC,now delete all the cookies in the internet options,after doing all this,switch on your phone and go into Bootloader mode(tri color screen),when there than connect your phone to the pc using usb cable but don't active sync your phone,cancell active sync if need be,when you connect your phone with pc via usb,look at the screen of your phone you will see a little usb shown at the bottom of the screen.
Now open the rom which you downloaded and execute the Ruu..,it will start to flash,let it complete ,it will confirm flash and reboot,it start now and work normal, I hope,it will solve this problem remember don't do anything else with the pc like browsing the web or reading e-mails,playing games or working on Microsoft office,don't touch you pc and phone while the rom flashes.
Well,there is another way also,but as you want the official arabic version rom on your phone,do it first as i told you above,if it works,good,otherwise we will do the second method good luck
Amazed !
Hmmm, sry to say I observed you joined this forum on Dec,2006 and posted 57 times,just went through your posts and was amazed that you already have gone through this unlocking and upgrading on different devices,well you seem to have quite knowledge about all this,than how come you are stuck with this problem now ?
I hope your not just kidding me ? or your are really stuck up and seeking help ?
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
GSM system said:
Hello ...
sty ...my Device freezing on K-JAM ...i don't know how to solved this problem i tryed more mothed but no way so what i doing ....now just my device inter in bootloader ...also accept it the offical ROM from i-mate ....
respactfully
Click to expand...
Click to collapse
ok, what is the present status of your phone ? what ipl/spl...? it shows in bootloader mode ?
as you posted in another thread that you tried to flash wizard_love_rom,but did not succeed,earlier you only wanted to upgrade to an official arabic i-mate k-jam rom.Now do you want to upgrade to any rom ? by unlocking the phone ? or just want your phone to work by any means ? if yes,then there's another option to get your phone working,I really hope so.Plz confirm what you want to do now ?
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
GSM system said:
thnaks a lot btother .
this is the info my device in bootloader
IPL 2.16
SPL 2.16
GSM 02.07.10
OS 2.16.9.1 Arabic
and i tryed to flash with another rom like this RUU_Wizard_225111_22511102_022511_CWS_WWE_Ship_1.exe but i can't i see this messege INVAILD VENDER ID also i tryed to use this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe in this link http://forum.xda-developers.com/showthread.php?t=310831 my device accept flash also the splash screen is changes but no way stay freezing So ..please how can i do it to start my device agein.....
respactfully
Click to expand...
Click to collapse
ERROR [294] : INVALID VENDER ID
these error messages appear when you use the wrong RUU to do the upgrade. RUU will check if the Model ID and Language ID are compatible with the device.
Well, as I can think,you had an Arabic rom version OS 2.16.9.1 Arabic on your phone before and tried to flash a wwe version rom.the bootloaders verified and did not accept the rom.So a bad flash and splash screen got freezed,the only way is to flash and try to downgrade to IPL/SPL 1.xx and CID unlock the device and upgrade to another rom to start working, or flash the official stock Arabic rom to bring back the phone to it's default status,but the official rom you downloaded and tried to flash was of the same OS version didn't flash correctly and got splash screen stuck.Therefore,the only option left at present is to try and downgrade it to IPL/SPL 1.xx.The options are :-
1.Try to flash again button's rom 'CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE.exe ' Which you already have with you,a couple of times more and see if it might work,
2.Otherwise download this rom from the link below and flash,hope it'll work :-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
If successful,good,but if still fails,
3.there's still another option to flash the rom with replaced 'Romupdateutility' in the rom,which I'll explain how to do it later,
first try the option 1 & 2,lets hope it works,good luck
brother Many Thanks ..
I will do that and tell you ...also please if you can explam me how to flash the rom with replaced 'Romupdateutility'.....
respactfully
My friend Zabardast_1
please look this is the info befor i Downgrading with this rom CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
now my device in Bootloader
IPL 2.16
SPL 2.16 ..
okay .... now i starting to downgrading ...my Device with this ROM CUSTOM__RUU_Wizard_1050412_WWE_101_11210_WWE
please note this pic i attached to you ... then after downrading ...this is my device info in bootloader .
IPL 1.01
SPL 2.16
now after i downgrading no thing happend just the splash screen change also i acctached to you image to see that ...
2nd step i tryed to flash my Device with this ROM Wizard_Love_2.26.10.2_WWE_Novii_CF2 what happend ( Error 300) also i attach to you image
now i wait your help ..please
respactfully
Related
Hello!
I tried to flash my Charmer with the new german Aku 3.3. At first everything seems to be ok, but at 95% it stops and i got the Message: update error- there is an comunication problem! So what can i do? I tried to flash the old rom back but there comes also at 95% a message: invalid command - nfb file cannot be used for your pda!
Please help me !
Greetings Musna!
Ps: can somebody upload a sd image for the mda compact II !
Go to bootloader mode, then try to flash RUU rom (1.x). You can find it on Charmer wiki.
It doesn`t work too, it always stops at 95% has anyone another idea?
did you try hard reset?
Yes i tried hard reset, but it is always in bootloader!
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
nitrane said:
I have also the same problem. Tried to upgrade to version 3.3. Everytime it stops at 80%. I don't know why?! I can repair it with the software and re-run it. But it has the same effect.
Now i will try to downgrade to 2.6 again. I really don't understand what causes the problem. I hope i will get this thing running again....
EDIT: I reflashed the device with the older 2.6 ROM and it is working right now. However I didn't really get why it gets stuck at 80% with 3.3 ?!?!
Click to expand...
Click to collapse
The aku3.3 is up to date the bootloader version!!!
IPL and ISP version now is 3.00.
http://www.windowsceportal.hu/forum/viewtopic.php?t=1079
Sorry but i do not speak hungarian. What do you want to tell me ?
I´ve got the same: My charmer is in Bootloader IPL 2.06.0001 SPL 3.08.0001
I can´t downgrade to AKU 2: Please order a newer Version.
Every try to upgrade to AKU 3.3 failed at 95% with Error 326.
Is there any help for my charmer???
oh.**** !!!! I got the same problem with them and my first pda uk rom already empty screen and then i try with my scrond pda German rom it the same problem and now just only show in bootloader screen.Have i ask someone who knowage about this he told me that if SLP in you PDA have chang it be hard to repair.So,I think I lose 2 PDA did I try to flash in T-Mobile Official Rom de that i hope to develop it but i hve to kill 2 Charmer.Who take responsibilities,T-Mobile right ???
Ok no problem you can repair it! At first you have to brand your device with the rom you want to! After 95% the Problem will come again! When it stops you have to go with a reset to bootloader again.When your device is in bootloader you have to install the Radio Rom from this thread:
http://forum.xda-developers.com/showthread.php?t=302768
After that your device will be able to boot again and it should work!- But the Problem during the installation will stay,so you have always to use this way to flash your Mda compact II!
In the new rom there must be a problem with the radio rom and this causes the broken device.
I`m sorry for my bad english but i`m not used to talk very much! So i hope you understand what i mean!
Greetings from Austria Musna!
that link is broken
Then try this one:
ftp://xda:[email protected]/Prophet/Radio_Roms/Prophet_G4_RadioRom_v2.47.11.exe
You can find the radio rom also on the ftp server. Prophet> Radio Roms>Prophet_G4_RadioRom_v2.47.11.exe
You can try different Radio Rom versions, i have flashed the v.247.11 and it worked.
Normaly it should work!
Thank u so much !!! My Charmer secrond PDA come back have life again and it can working.So,my Charmer first PDA UK rom still empty screen and notthing working when i press any button.Who can slove this problem !!
Musna do you have any massage such as msn
Ive downloaded official wm6 sve rom from HTC website. My herlald is stuck on bootloader ipl 1.08 spl 1.08. When i connect to computer usb is shown on the screen bottom ,but when i try to flash the rom ,error 300 invalid update tool is shown.
how can i fix this??
Official rom matching my p4350 is supposed to work,but it doesnt.
please help!!!
Hi there,
I recently had a similar problem as you, what I did was to:
- remove the battery for 5-10secs
- put the battery back
- press and hold the camera button (do not release it)
- press the power on button ( the one at the top of the phone, used for the soft resets)
- The phone will display three different colors and "IPL ...."
- Connect your phone via the USB cable to the computer, Windows XP detects that as a new hardware and installs the USB drivers for it. Pockect PC ...., just accept the driver installation when it warns you that the driver is not signed.
- Past all of that you should now be ready to use the Official ROM file from HTC, run the file, and go through the steps. It should start the ROM upgrade.
Well I hope it helps you as these steps did bring my phone back after a failed ROM upgrade.
Cheers
thanks for your instructions .
i will try and post results
Is your phone CID locked?
Because if so, you have to go to your phone provider and see if they have their own official rom!
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
elizag said:
I Dont Understand ,if Htc E-club Recognises My Serial Number,and Gives Me The Possibility To Download Sve Rom ,doesnt That Mean That I Should Be Able To Flash That Rom Into The Bricked Herald?
Click to expand...
Click to collapse
Yes same i also have same problem i get Norway rom from my serial number but giving me invalid update tool
my phone
ipl 1.08.00001
spl 1.08.00001
please help me in that case
thanks in advance
i asked the costumer,the herald was cid unlocked when he bougt it,he flashed succesfully pdaviet ,then he wanted to flash wm6 but after uspl the p435o went into bootloader mode,ive been trying with many flashes with no result,please help!!
I had the same problem, and i did the download again. and it worked. try to download the upgrade again and dont forget to take of the memory card of the device.
I hope this can help you.
sorry if this post seems to be a repeat , but i tried the search option and the results were not fruitful
a friend of mine , while trying to upgrade to a TNT ROM , didn't HardSPLed the device first , and successfully changed the ROM of the device , now it is stuck on the blue screen with SPL and IPL versions , and no response . for some reason , the device can go to bootloader mode , but it can not be reflashed , and it does not respond to a hard reset command.
please advise on what to do
regards
When it is in the bootloader mode, and connected via USB, is there a little USB icon in the bottom left? If so, simply flash your phones carrier ROM and all should be fine with it again. You can then apply HardSPL and flash to the TNT or any other ROM that you want to. Is your device a G3 or G4 by the way? What are the numbers after IPL and SPL?
well my friend says that the USB icon is visible there , and the device was indeed a G4. the thing is , what exactly should he do , in order to flash the ROM , since non of imate roms work for it. should he use any special software?
i'll greatly appreciate your help
Is he using Vista or XP?
he is using Windows XP , could it be the PC OS that caused interference?
Well, only if it is Vista does it really matter. He needs to get ahold of an original carrier ROM, such as the O2, or T-Mobile one and flash it to his phone, then HardSPL it, then upgrade to 6 or 6.1.
Download and flash Wizard_love Rom,it might do the trick,then HardSPL and upgrade to any wm6 or 6.1 rom.
What exact error it gives while flashing imate official rom ?
well the wizard has been an imate ,and it was flashed with an Original imate ROM already , but no success , any other suggestions?
thanks again
error [294]invalid vendor ID :
This Update Utility can not be used for your PDA phone.Please check your update utility.
here is the picture
http://i35.tinypic.com/29v03rl.jpg
and could you please give a link to the Love ROM?
thanks
Download wizard_love Rom from this link:-
http://rapidshare.com/files/17792050/Wizard_Love_2.26.10.2_WWE_Novii_CF2.rar
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
No SD Upgrade even tough... MTTY hahahaha
king_dani said:
well he first got this error while upgrading
http://i33.tinypic.com/ivjz8o.jpg
then he managed to upgrade , but had the very first screen after ugprading on PPC screen , and nothing happens
it also gives a failure message while trying to manually Hard Reset after upgrade
please advise on what to do next
greatest appreciations
Click to expand...
Click to collapse
It seems you need to follow the drugstore MiniSD upgrade but...
I guess you dont have another wizard to make a bacuk up... so wait a minute...
You don have hardspled yopur device...!!!
HAHAHAHA forget it!mmmm
Maybe mtty... folow mi signature maybe works
See you There Men!!!!
I've tried to download the ROM, but HTC tell me this "Sorry, this software download is not suitable for your device".
Maybe my device s/n number is not correct.
Maybe someone who has the correct s/n could download this ROM~
Just tell you guys the news~
http://www.htc.com/europe/SupportDownload.aspx?p_id=174&cat=2&dl_id=537
Caxio's and frednd's DownLoad Link--(I wanna say THANK YOU VERY MUCH!)
See page3 #21 & #23
Filename is :
HTC Touch 3G_MR2009_RUU_Jade_HTC_Europe_2.32.401.2_Radio_Sign_12.41.30.16_0.41.30.12_Ship
edit:
on booting the last red line (after radio and protocol) now says :
D 2.32.44800
Date (which shows after first boot) after screen calibration is now set to 25/03/09
(in settings / about) Build : 5.2.20771 (20771.1.4.6)
(in settings / device info) : rom version 2.32.401.2(44800)
ON customization after first boot if scaned for wifi networks and poped up a message about available networks
Ht845kh14923 :d
o2p63 said:
Ht845kh14923 :d
Click to expand...
Click to collapse
This is for italian version.
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
Downloading this know !!!
Will i be able to flash it to my device now i have used HardSPL ??
It seems HardSPL 1.40oli and this 2.32 rom don't work very well.Very sluggish and phone can't turn ON even after 2 Hard resets.
What is your experience???
Do not install if hard spl
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Could anyone check, if the gps-support has been improved?
km
lexx2009 said:
I installed the ROM upgrade from HTC, it ****ed up my device real bad: phone module not working, device boot up in aprox 1 min, after 3 mins Touch Flo not started, it restarts by itself.
I did hard reset and nothing happens.
I,m reinstalling jademan superrom!
I hope that works!
Click to expand...
Click to collapse
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
update : Jade is fine now. New SPL is 2.32.0000 . More testing to be done.
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
lagoskon said:
Exactly same symptoms. I went to Stock SPL 1.40 and reflashing the new rom now. Hope it works better
Question : Can HardSPL 1.40.oli be flashed over new 2.32.0000 ?
Click to expand...
Click to collapse
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Myster said:
How did you go back to Stock SPL 1.40 ?? Where can i find this ??
Click to expand...
Click to collapse
This is on the Hard-SPL page along with the Oli version
http://forum.xda-developers.com/attachment.php?attachmentid=166262&d=1236988725
GPS seems to work fine now, also the scroll behavior of opera is better
km
It is annoying that hardspl doesnt work with this upgrade of jade.. can't built a rom now with the new oem. It's all newer than the iolite versions, but still doesnt include Footprint
Any changes in Manila? New tabs? Calendar? Stocks? Changes in the contacts?
Hi
What is the Radio version in this new ROM?
I have just applied the version from here and if this contains the old Radio then I can hold off for now until hopefully a compliant Hard-SPL is made, I can live without Opera being perfect.
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
nereus114 said:
Hi all,
I'm a new owner of a Jade since april 11. I'm french so excuse me for my english ^^'
I installed this new rom, and i get exactly the same problems as Lexx2009 and Lagoskon. I tryed to install the stock 1.40 rom but it doesnt work. I can synchronize the phone but i cannot use customRUU or hard spl anymore, it says the Jade isn't plugged with the usb cable ..
Please can anyone tell me what i have to do to get a rom whith works please
Click to expand...
Click to collapse
Install a different rom from this forum-> Shut down your jade, unplug it. Hold down "volume down button" and ""power on button" to get in to boot mode. now start to flash another rom.
when finished you can install stock spl and then install this new rom
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
jarel said:
Stupid (or not so stupid) question,
If we flash original SPL to instal this ROM, and SPL is upgraded by this ROM to 2.32,.... and HardSPL does not work with this new 2.23 SPL,.....
THEN, IT SEEMS THAT FOLLOWING THESE STEPS WILL ONLY MAKE US SLAVES OF THIS NEW & OFFICIAL HTC ROM!!!! i.e. No possibility of other ROMs flashing until new HardSPL is developed,...
Please, somebody to confirm this statement?
Thanks,
Jarel
Click to expand...
Click to collapse
that's right.. but i think it's in one of the drivers. using the old drivers and the new oem/sys makes it possible to run it with the current hardspl.
radio in this rom 0.41.30.12
no changes in manilla tabs, don't know what changed but it's newer
please help me to flash rom always stack on 13%..
please help me..
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
ferdiebaq said:
Please try to read posts regarding updating your unit. You can brick your phone if you don't know what you are doing.
Additional information:
What is your present ROM version?
What ROM are you trying to install?
is your unit unlocked?
Does your unit have hard SPL installed?
Click to expand...
Click to collapse
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
jheizee said:
i do, but the problem is vender id,
im tryn to install wm6.1 then always error vender id..
i forgotten now what is the previous rom version.
hard spl? like 1.20.0lipro? yah i already use it,
sorry for my bad english..
Click to expand...
Click to collapse
I have the same problem
but can't instal bootloader or flash any ROM
I tryed to flash the original rom but it stucks to 13%
I tryed to instal many bootloaders but when it cames to 100% it says that image is corruped (error 270)
can any one help me ??
up guys.. please i really need your help..
i want my trinity back..
OK. I've had that problem before when I first got my Trinity. Been through a lot of trial and errors before I was able to do it correctly. I don't know if this can help but this is how I did it. Usual warning.... I am not responsible if you brick your device.
Just look for the following files in the Trinity thread and install them in the following order:
1. HTC Trinity SIM & CID Unlock - v1
2. Install Olipro 1.20
3. Now I don't know if this should be done but I read somewhere that you should upgrade your Radio version so I installed "Trinity_Radio1.56.70.11"
Even though I have done these steps already I always do them again WHENEVER I install a new ROM. It does not hurt to repeat them.
If you are getting "error vender id" message then it means that your unit is locked again so you have to unlock it again like I said in my previous post. You must have installed an official ROM previously which will lock your phone again.
please help me to get my trinity back
i think that my phone has been locked because i can't instal any ROM or HardSPL
I tryed to flash windows d. 3.3 Dmore (wm 6.1) but when i boot windows it stucks in the green screen so i can't run cid unlock.
i cant send the phone for servise because i get it from a friend and i havent the receipt
please help me to get my trinity back
thanks guys.. my trinity is alive again.. hehehe
i just remove the radio.nb and its continue upgrading..
but the problem im facin now is everytime i flash radio its always stuck at 0%..
i think my radio bootloader is damage?..
any idea?
any have a schematic of radio ic? where i can find it? how does it looklike?
try to use SSPL, after flash official ROM and then try again from beginning
maybe can help...