Hi guys, I am having some little problems with my Xda2i as following.
1. I use button lock to stop using the camera button (as I always accidentally touch it then camera starts, many time I open camera without notice for long time till my battery almost gone!!) Every time I soft reset, it always turn to defalut mode.
2. Also the same happen with "today". I show some items such as Worldmate. When soft reset, it disappears (though I ticked to show it always)
3. Favorites network also the same, ticked it then changed after reset.
Could anybody please help me?.
Many many thanks in advance..
do what i have done removed the camera from my start up prgrams and allocated the button to none that way it can't activate
as for the others i'm not to sure ,i'm sure some1 else will be able to help
Sounds like somehow the registry has become read only. Have a look in the startup folder and see if there any programs in there that shouldn't be running. Also has this started after some program has been installed?
Hi Pug, checked my startup and found below program lists
-camera_detect
-checkautorun
-clear_notify
-IA_CID_start
-PHM Traylaunch
-PhotocontactPro
-Pocketnavy
-poutlook
-RunBT
-spb GPRS monitor
-STK
It seems like you doubt, it happens after program installation.
Any more advice?
Many many thanks
I don't doubt you at all, just trying to help you solve this.
PHM hasn't got a registry restore feature has it? If it has try disabling it. I don't use it so I don't know.
Don't know what that Pocket Navy is so can't comment on that.
If you delete Camera_Detect you can assign the camera button to something else if you want and the button assignment will survive a soft reset.
Sorry for my aweful english, Pug.
This problem wa before PHM installed, it should be ok (anyway I am not knowledgable to know if it has registry or not. I am too new hands)
Pocketnavy is "CloseAll" I like it more because it has window to see running programs and can select to close which one. THe most important is it free.
I will try to fix it as you recommend. Very appreciated your time to help.
Thanks again
Ongoing issues that need to be resolved - If you respond to any of these before you write any response PLEASE put the issue number at the top of your post, because this thread is going to get very large fast and this will help keep it somewhat organized, thanks.
#1: I have tried everything but can dump the time & battery icon off the title bar without alignment problems. Anybody find a key yet? Are we stuck creating new icon templates in black to save us from the alignment issue? Or has someone found a key to compensate the alingment loss from removing both time & battery status icons?
#2:Does Video Share work on the Tilt if you have an HTC ROM on it and are connecting with a Video Share enabled phone? (obviously this will only be applicable for people who live in the selected 3G networks for which Video Share is supported)
#3:When I make/recieve a call, and I try to access the top bar (start button) the top bar locks up. if I try a shortcut button to IE for example, IE loads but just says connecting... if I hangup the call, it redoes the 3G connection (it was 3G before I was on the call) and the IE works.
BUT the top bar is locked up. Start/3G icon, etc doesn't click. Only the "X" will work until I do a reboot.
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
#5
Is there a way to choose radio frequency besides using Bandswitch? Meaning the setting would show up in the Phone Settings menu that allows Band Selection. Perhaps there are some registry edits out there?
Here is a cab file that replaces "PhoneSettings.Dll" with the one from the Rogers Canada Tilt Rom. and enables the Band Tab. You will be required to reset your phone after installation.
#6
There have been issues regarding connecting to WEP encrypted networks...if anyone else knows of these issues and a possible fix, please contribute...whitelisting the MAC address on the router has already been attempted (and failed).
This post has been moved and temporarily stickied.
Please be sure to visit the Wiki. Most of your questions can be answered there regarding the Tilt.
The previous thread, "The thread to address ALL TILT-specific questions" has been unstuck, but can still be used if required.
Have fun!
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
kireol said:
HTC steaming media seems to work on the TyTN II but not the tilt. of all the posts that I've read, and googled, only 1 person has said that their tilt works with streaming media is working, but not fully with every site, just a few. TCPMP with ytpocket seems to be the closest thing to a band aid. but this ony gets you youtube, not the other sites that work on a TyTN II with HTC SM.
Click to expand...
Click to collapse
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
GSLEON3 said:
Okay, Here's the deal. HTC streaming media is for RTSP files only. That means Pocket YouTube. Yes it works in the US, but you have to have the correct ID/User Agent for it to work correctly. Basically the Streaming Media Player is a license of Real Player. All stock Tilt have an EXE called Real.exe in windows directory. If you open it, it's the same as Streaming Media Player, Has the same Icon as Real Player, & the about screen calls it HTC Real Player.
Click to expand...
Click to collapse
errrrrr. If you flash the identical ROM on a TyTN II and a Tilt, how are the files in the windows directory any different?
I think you misread what I typed.
OK, after serching in many forums, i found that the problem is:
"When the device is protected by a password (Start/Settings/Lock), the start menu freezes after ending phone calls. In addition, the backlight turns off.
This only happens if the phone call is long enough (more than a few secs) for the display to turn off during the call. This is to prevent accidental button presses. When the phone call is ended the display should come back up, however, this is where bug seems to manifest itself. Somehow the password protection gets in the way and turns the display off and freezes the start menu.
The reason why this is serious (especially for business users) is that when you use MS exchange sync, many businesses enforce policies requiring a device password (common & recommended practice). This means that the option of turning the device password off does not exist. Therefore, using exchange sync (with security policies enforced) and making phone calls does not work."
So, acording to this, there are two solutions:
1º Sinple turn of pasword protection if you don't need it;
2º (found in modaco) Change a registry entry:
\HKLM\Drivers\BuiltIn\RIL\EnableFastDormantDisplay DuringCall
From "1" to "0" will stop it but be warned if you arent using a headset then the touch sensitive screen will be in operation throughout the call so you may end up with your ear triggering applications etc...
cheers
HTC Kaiser QuickGPS Fix (Error solution)
Just import this .reg file into your Kaiser registry:
http://myego.cz/img/htc-kaiser/quickgps.reg
Nasty Camera
My phone works ok I guess and I am pleased with it. But I miss not being able to take photos with it. I used my TYTN all the time primarily as a mobile video station and a camera. But this KAISER is a complete mess when it comes to taking photos.
My point is, can someone tell me how to turn off the auto focus is thats the problem or does anyone have any idea how to speed up the lens to capture time. It takes forever to set its focus. Oh, and don't start me on video capture as that IS the joke of the century.
I can't believe what a step back this KAISER is in comparison to its older brother the TYTN. I expected this phone to at least take a moderate picture. Why on earth is the 2nd camera better (VGA) than the 3MP main camera. It is completely crazy.
I digress and am off to cry now.
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
ConcaveLiNkiN said:
Hi all,
may I know if anyone had face this problem. Whenever we receive an SMS, it pops up as a notification at the bottom of the screen. But the notification normally have 2 options: Normally, reply/view on the left and menu on the right. For the left option, sometimes it is "reply" and sometimes it is "view". Is this normal? How can I change it to permanently as "view" only?
Thanks all in advance.
Cheers
eRic
Click to expand...
Click to collapse
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Hey, actually I have a problem synchronizing. I have been told that if a Kaiser is connected to a PC through Activesync, then the Kaiser could use the PC's Internet connection. And I think that is great, except mine won't. Instead my PC will try to use my Kaiser as a modem, even though it is already connected.... What can I do?
caulirick said:
Hi eRic,
It is shown as "Reply" when your message fits the dialog box notification neatly. If it doesn't "View" is shown for you to read the full message. Hope this helps.
Click to expand...
Click to collapse
Hi caulirick,
thank you so much. That explains why, sometimes I see "reply" and sometime I see "view".
Again, thank you so much
Cheers
eRic
Doug2873 said:
#4
The "Buttons" setting only allows me to change the short press settings for 5 buttons. Elsewhere on this forum, there are instructions for adding the PTT button for both short press and long press, by adding registry keys 40C6 and 40C7. Can I add long press entries for other buttons?
Update!: According to HTC support, this is currently impossible. Sorry. (thanks deathace)
Update #2: Vito Button Mapper also enables push and hold functionality for the standard buttons (not PTT button) using the Start, Settings, Button Mapper. Also allows for customization of the soft buttons based on running application. Got to say that while Vito Button Mapper works, it's not that WM6 Pro friendly. In other words it works, but has some issues with icon display and uninstall. Hopefully HTC support will get their act together. (thanks Jim_R)
Update #3: Spb Pocket Plus 4.0.1 also allows for remapping of keys w/hold functionality, including PTT and works with WM6 (thanks _Alex_)
Click to expand...
Click to collapse
DoubleLauncher also includes similar functionality, but with even more options:
single tap, double tap, single hold, double hold, triple tap - 5 combinations per button - HTC may be right that it isn't possible with vanilla windows, but it is obviously possible to code something.
wifi vs AT&T
Sorry for asking a question that I am sure was already addressed (unfortunately I cannot find it).
How do I instruct my AT&T Tilt (Kaiser) to try to connect using WiFi when it is present rather then connect using AT&T GPRS, 3G whatever?
When I bought my phone in October, I got advice from Howard Forum to go to your site (http://forum.xda-developers.com/att...22&d=1191864241) to get a cab file. I did that, and it worked.
I had to replace my phone which was defective, and now I wanted to get the same cab file for the new phone but the link no longer works.
Your advice and help will be very much appreciated. If you prefer you can send me a private message to [email protected].
upgrade??
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Scrog said:
I was this close to jumping from the 8525 to the 8925 but advised not too: ATT rep says there are software and hardware issues that they are working on with HTC and IT guys say they've had issues as well.
What's the consensus here? is it worth the risk or should I wait a while longer for things to iron out?
Click to expand...
Click to collapse
Well, the Video Rendering sucks. All in all though, I have to say I really like the device. It's okay out of the box, but after tinkering & tweaking I have to say that I'm glad I moved to the Kaiser. The GPS is solid for me & after changing my DNS settings to OpenDNS the internet is fast. I tether a lot & get great speed on my laptop (when in HSPDA or 3G). Yess, there are some issues, but I think it's the best device around. I've had no problems with my Tilt or my TYTN II. It works really well with our Blackberry server & I get my emails fater on my device than on my pc.
The only issue for me again is the video. But it's mostly a work device for me, so vide isn't a big deal. Besides TCPMP playback is good enough for catching up on my missed episodes of House MD.
I'd say go for it.
Hi all,
I wonder if this is even consider a problem or bug. At the Today screen, there will be times when you are overflow with schedules. Then a scroll bar will appear at the right most of the screen(as shown below left). The scroll bar stretch all the way from the top of the screen to the bottom of the screen. Is it possible to change it to such a way that the scroll bar starts from the bottom of the Today plug-in to the bottom of the screen(as shown bottom right). Please kindly advice if this can be done.
Thanx
Cheers
eRic
You can use HHC (home plug-in config) to lock the home plug in. Then the scroll is just at the bottom. There is a registry setting to do the same thing, but I don't know what it is. The HHC is a great utility as you can back up the plug in and change the fonts and icons too.
OpenDNS
GSLEON, where does one change DNS settings to the OpenDNS settings? Thanks.
What can I do???
Hello all,
I am on my second Tilt now (on AT&T network) but I am still having voice clarity issues. Very choppy conversations at times, even when connected to a landline, but there are always at least 2 signal bars & 3G displayed. I have tried to disable the data before making calls, but so far I have seen no improvement. Could Active sync have something to do W/ my problem? It always seems to be running. Also, I am using the stock AT&T rom.
Any input provided pertaining to my issue is greatly appreciated.
Tobe
Ok, im really frustrated by certain things on the diamond, so much so im thinking of selling the diamond....
I love most of the features but a few things really annoy me...such as:
Why when a call connects, does the screen switch off?? This is really annoying when your listening to voicemail, for obvious reasons...
Secondly, i CANNOT switch my input type from FULL QWERTY, i change it, and then when i go back into INPUT, its FULL QWERTY again...why?
Thirdly, when entering a text, i dont want to view a full convo, and the last word of the text remains in the predict part, meaning when you click close, it asks if you want to save to drafts?
If im being stupid, then someone please explain....if not, can anyone assist? Please?
all of your problems have simple quick fixes and have been asked a million times by other people! i dont mean to be rude but please search the forum!
most of you problems can be solved with this one page thats always at the top of the diamond page!!
http://forum.xda-developers.com/showthread.php?t=398265&highlight=diamond+screen+turning
and look here for your input problem
http://forum.xda-developers.com/showthread.php?t=412757
took me 2 seconds to find the thread
SEARCH!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
and to asnwer your question, the light sensor turns the display off when you put the phone to your head, its a kind of safty feature so that you dont press any on screen buttons with your face.
i like the feature, but like many others like you dont, its on the first forum link ive just given you as is the fix to disable the sms chat interface
I did try search but came up blank....The above isnt really a solution, more of a workaround, i want the phone to function as it should, i.e be able to change the input type via settings....
Thanks a lot for your other assistance though Keyz...
you change your input option from the touch flo 3d interface, NOT the settings page on WM.
go into a new text message, and press the little keyboard icon on the bottom of the screen
im not using the TF3D interface though....using WM.....
you have TF3D turnd off?
Yes, but i have switched it back on to see if i change my mind about it...
I still cant get the screen light sensor thing to work....weird...
The stock AT&T rom does this and I was hoping someone would know how to enable this feature on a cooked rom. I always end up putting my device in sleep when im typing anything. Ive looked through the registry to try and find where i could change it with no success. Searching also didnt seem to yeild anything relevant then again that may have just been due to the keywords i used. Anyone know how to do this?
Thanks
I would also love to know how to do that. It is really annoying when UI'm in the middle of texting and I hit the power button by accident.
I have seen a cab floating around here somewhere just after the tp2 was released, you should be able to find it with the search
i tried searching first but was unsuccessful at even finding anything related to what i was looking for. Not even someone asking about it. i guess i will have to think of some other keywords than landscape and powerbutton. any suggestions? i know its possible and its probably just a registry key
it's a good idea. Me also find that when writing to Querty keyboard presses power button. Could this feature be added to the energy rom.
well it could be added to any rom, but i wouldnt imagine NRG adding it by default. It could be rather bothersome to some people. I wouldnt be surprised if he added it to the addon folder for his roms if a few people requested it and sent him the cab to host. Then all you gotta do is put it your UC folder and it would be auto installed anyways. Anyone know if the keyboard mapper program handles the power button and could do this? id rather see a cab then using a whole app but at this point i will settle for anything i can get. mabye i will try it when i get off work
dang you really gotta choose the right keywords to get anything. long story short, found a thread with a link to another thread that had the cab. And it works great! better than i had hoped. disables the short press and you can hold the power button to bring up slide to shut down which has a sleep option. but if ur in landscape u have to hold the power button to get it to come back on. there are multiple profiles thats just the one that works best for me. give it a try:
forum.xda-developers.com/showthread.php?t=546094
find the program:
hAndy Power button
It's a tiny little CAB that does 1 thing.... disables the button when keyboard is open
works great.