today i dropped my alpine as i got out of my car.. smashed onto gravel, and had some annoying scars. thank god, there's nothing wrong with it, but the problem is the stylus seems not to fit well in the silo. it makes some scretching sound when i put it in... how to fix it, another problem is that, there's a tiny dot in the screen, it's so annoying when watching clips.. it happened even before that "dropped" incident. if want to send to service centre, do they charge for it? how about that stylus prob? and how much would it cost normally to change the front and rear cover
I had my Diamond for about 8 months now. All of a sudden no matter where I click on the screen it always clicks on the top left corner (Start button). I hard reset the phone, changed SPL but nothing worked.
My Specs:
Duttys 5.2.20764.1.4.3
Diamond-hspl-1.24
When I try to align the screen it keeps on looping not letting me get out of the screen alignment. I have to soft reset the phone.
Is my phone dead? Do I have to send it to HTC for repair?
sounds like a broken screen digitizer (the plastic which recognizes touch).
If its under warranty then i suggest you flash everything back to factory, ie. stock spl, stock ROM. Then RMA it back for warranty.
If it isn't under warranty and you wanna get it repaired. Then just order a new digitizer from Ebay and install it yaself. That will save you an arm and a leg, since HTC will probably charge you like 4x the price to get it fixed.
How come it responds to the screen alignment than? When I press the cross hair it responds to it and moves to a different position.
Right now I am trying to put the stock SPL on the phone but I can't get past the screen alignment. The is synced and everything. Any ideas?
You MUST change the ROM to stock first then the SPL
I did put the stock ROM back on the Diamond. But I can't get passed the align screen. I tried deleting the "welcome" file form \Windows\StartUp but the file is protected and can not be deleted. Is there any other solution of by passing the welcome screen?
I had this problem too, I got my Diamond from Rogers and went home. After a few minutes this started to happen, and I instantly went back and got a replacement.
I got same prob. But sometime it work fine, after i do softreset i cant skip screen align. Can hard reset fix this prob? im from malaysia, how much it'll cost to replace the digitizer? thanks
i have this problem too
hello all!
I had the same problem as you! after some time searching... found a program called "Remote Screen Alignment" ... and your problem is solved!
Just google it!
caudex said:
sounds like a broken screen digitizer (the plastic which recognizes touch).
If its under warranty then i suggest you flash everything back to factory, ie. stock spl, stock ROM. Then RMA it back for warranty.
If it isn't under warranty and you wanna get it repaired. Then just order a new digitizer from Ebay and install it yaself. That will save you an arm and a leg, since HTC will probably charge you like 4x the price to get it fixed.
Click to expand...
Click to collapse
For the new diditizer is this easy to repair by myself??
I have a broken touch screen too (LCD is working perfectly, touch is non responsive, all over the screen)
I was just reading in another thread that changing the digitizer on its own is a bit of a nightmare as its glued to the LCD screen? Is this true, is this the case, if so, would it be possible to buy a LCD + Digitizer in one? I searched eBay but could not find anything?
Any help is much appreciated as the cost of a new phone is not an option!
Thanks,
DG.
DanGlee said:
I have a broken touch screen too (LCD is working perfectly, touch is non responsive, all over the screen)
I was just reading in another thread that changing the digitizer on its own is a bit of a nightmare as its glued to the LCD screen? Is this true, is this the case, if so, would it be possible to buy a LCD + Digitizer in one? I searched eBay but could not find anything?
Any help is much appreciated as the cost of a new phone is not an option!
Thanks,
DG.
Click to expand...
Click to collapse
Hi
My digitizer is also broken, I ordered new one from ebay (cost about 10 €) and as you wrote replacament is nightmare.
I'm trying to find a manual or instruction video but I cannot find anything.
If somebody knows how to replace digitizer please let me know or share a link for it.
Currently my best solution is to order new digitizer with display (cost about 20€) It is possible to order for exaplme here:
http://cgi.ebay.co.uk/NEW-FULL-LCD-...UK_Mobiles_Accessories_RL?hash=item518e98a7fa
Cheers
hello, i have the same problem with my diamond here, pres the screen and it activates the left upper corner, after a while stoped doing that but not my right lower part of the screeen doesnt respond. i mean i press the "j" and it writes "k".. u know what i mean., i cac calibrate the screen but after 1 min the problem is back. i wanna buy that digitizer and change it but b4 this i need a confirmation, did anyone do it and after that their diamond worked like b4? waiting for reply thx
This post is giving me a nightmare. I am facing similar problem only its not permanent. What I mean is it woks fine sometimes but wont respond sometimes. Sometimes it responds in the corners if I press hard. I think my phone is just passed its warranty also its 2nd hand though I have the bill. Service centers are really bad so I am scared.
Do you'll think my digitizer is gone bad or is it a software glitch?
Hi guys
I have a similar problem with my HTC Touch Diamond,
The screen just gone crazy constantly pressing on the top-right corner, this happened like 1 week ago. After searching the internet and this forum I found out that my only quick solution is to hard press the four corners to get working properly again but the problem will come back again after a while.
I bought this phone from ebay in 2008, had no problems with it untill I found out this ugly strange colored square in the middle that is noticable after switching phone's backlight off, I guess that was due to me holding the phone in my jean's back pocket (as I used to previous phones non touch ), I had this phone working perfectly until what happened last week!
I decided to find if this is a software related issue, so I upgraded to official HTC ROm 2.03.405.3 WWE, but the problem persists
I also bought a digitizer from ebay in case I want to replace it (but never done this before)
Can anyone please confirm if I am still under warranty, how to check this and if yes is that going to cost me anything to get it returned to HTC for repair (other than postage costs of course)
If not under warranty anymore, do you advise me to get a LCD+Digiztizer combined instead ?
Many thanks !!!
Damian
I have this problem (not my video):
youtube > watch?v=5-IUzerAT0s (sorry, I can't post links)
Problem:
Sometimes, and really just sometimes, no matter where I touch the screen it only signals a left touch. So wherever I touch, 1, 2 or 3 - only 1 will enter.
I am not sure if this is related, but it may give some clues:
A few days ago I disassembled my Diamond. I did not take out the LCD coz it's sort of glued in and probably hard to take out and may break.
However, I got down to the digitizer soldering. I did not de-solder the flat-cable, but I pressed my solder iron on each of the 4 solder joints. I pressed the solder tip right on the film. Don't worry, it's most likely polyimide and it's heat resistant.
After that the Diamond worked well, well, for a few days. Then same happened again. When I have the problem and I press strongly right of the HTC logo (LCD bottom right) the problem disappears. That makes me thinking the problem is maybe mechanical.
It maybe a solder crack. I presume the Diamond is RoHS, and my solder iron was not RoHS. That matters, coz RoHS solder needs more heat the lead solder. Means, my solder iron did not really melt the solder under the film.
I will give that another try with an RoHS solder iron in the next few days.
minidisco said:
I have this problem (not my video):
youtube > watch?v=5-IUzerAT0s (sorry, I can't post links)
Problem:
Sometimes, and really just sometimes, no matter where I touch the screen it only signals a left touch. So wherever I touch, 1, 2 or 3 - only 1 will enter.
I am not sure if this is related, but it may give some clues:
A few days ago I disassembled my Diamond. I did not take out the LCD coz it's sort of glued in and probably hard to take out and may break.
However, I got down to the digitizer soldering. I did not de-solder the flat-cable, but I pressed my solder iron on each of the 4 solder joints. I pressed the solder tip right on the film. Don't worry, it's most likely polyimide and it's heat resistant.
After that the Diamond worked well, well, for a few days. Then same happened again. When I have the problem and I press strongly right of the HTC logo (LCD bottom right) the problem disappears. That makes me thinking the problem is maybe mechanical.
It maybe a solder crack. I presume the Diamond is RoHS, and my solder iron was not RoHS. That matters, coz RoHS solder needs more heat the lead solder. Means, my solder iron did not really melt the solder under the film.
I will give that another try with an RoHS solder iron in the next few days.
Click to expand...
Click to collapse
I have the same 'tendency to go left' problem. From my experience, I found that the problem could be caused by heat. Here are some examples when it goes wrong: When I use Tomtom navigator while charging the battery, the phone really heats up and starts to go 'left'. When I try to text message under the sun after taking it out from my pocket. When I have high usage such as wifi + opera. Really hop somebody can come up a solution for the problem...
The Reason ---
Its a heating issue seen in 20% of all shipped diamonds. It heats and expands the digitizer causing loss of touch.
Solution ---
I'm working on it!
P.S - The heat i'm talking about is not the heat that's generated wile using the phone , its due to outside exposure.
Crazy thought - Try it at your own risk
Exposing the mobile to moderate temp (cold , say 12-14 degrees) might help. Not sure.. i said MIGHT.
Don't try this if its under warranty. And don't blame me if you did something wrong and all you circuits get messed up!
Anyways will post if i hit something on the way!
No, new solution??
Maybe change the digitalizer solves the problem?? Because two months ago the problem only stay few minutes but now i can't make the alignment process.
Thanks!
Hi all ... I have my HTC Diamond for about a year. I love this phone, and I don't want another, but today, unfortunately he has a very strong fall. I always had very, very careful with it. But today was the time, the phone crashed, broke away from the back cover and battery, and I thought to myself, if not damaged by this fall, he would never break down. I put the battery, put the cover, turn it on, he vibrate on startup, but nothing else, the phone went blank, I was waiting, and then there gave the sound of that presentation of HTC, but no picture, no lights on the keys, nothing ... I'm really sad, I have no idea what it is. Already dismantled a bit cuz I thought it was some form of contact to the screen that is hung up, but no, it's all good inside. Does anyone know what could be?
Sorry for the bad english (google translator)
Please... can anyone help me?
could be flex connecting Display to motherboard damage. Send to HTC center to check
My diamond did the same thing, just open it up and connect the flat plastic display cable back into it's little plastic connector on the motherboard. Takes all of 15min to do and there is no way you can screw it up
gripen40k said:
My diamond did the same thing, just open it up and connect the flat plastic display cable back into it's little plastic connector on the motherboard. Takes all of 15min to do and there is no way you can screw it up
Click to expand...
Click to collapse
Thx... but since then, I already repair it, not me, and the guy make me pay 20€ for that... and now my GPS doesn't work. By what I searched, may be it's the coaxial antenna that is not connect, or I heard that after deconnected, it can't be re-used.
But I don't know where to buy a new one...
Well at least try opening it up and seeing if anything is broken. The guy who fixed it probably disconnected it on purpose so you have to pay him more to fix it again
I have also gone through the same problem last month. As my small cousin came from abroad, he threw the phone like wrapper of the chocolate but I send the phone to the repairing center and it is well now.
My Droid's touch screen isn't working in the center vertically all the way down. I can still use the 'edges' of the screen. I need to use the middle of the screen for a few things (not transfering stuff over). Is there any way I can 'project' my Droids screen to my computer and click/touch in it to use it?
Thanks in advance for all help. It's appreciated
~mfungah
Edit: This is the original Motorola Droid.
I have the same problem on the right side of my milestone :S
I had the same problem, but from the back arrow upwards, specially when the phone got hot. As my phone was still on the warranty period, I flashed it back to stock and updated it to the official 2.2., took it to an Orange shop and got it back after almost a month: they basically changed the whole top part of the phone (I got a brand new screen )
Repair problem
I had a same failure. The touch panel was bad. I ordered one from eBay. It also came as well put it. It works well. Only so much wrong with me that for some reason the phone stacked in landscape mode, I can't change to portrait mode. What is wrong? I put together something wrong? I do not think so. Everything else goes. (or so it seems)
This has to do with the digitizer (the glass you touch over the top of the LCD you see) being defective or unsealed. This is due to environmental moisture finding its way into the phone and f**king with the electrictal signals sent by touching the screen. There is a 'phantom touch' issue that seems to happen before or during the vertical unresponsiveness, and that can usually be temporarily remedied by firmly pushing your screen downwards (your phone may restart) and taking a blowdryer to your phone until it's just hot enough to be uncomfortable to hold (and no longer take it into the bathroom while you shower). One way or another, you're going to have to replace your digitizer eventually.
Sent from my Droid using XDA App
I had the same problem months ago but it's now fixed.
STEPS:
1. Digitizer I bought from this guy:
http://cgi.ebay.ph/New-Touch-Screen-Digitizer-Motorola-Milestone-A853-/270780531 891?pt=UK_Replacement_Parts_Tools&hash=item3f0bc704b3#ht_2811wt_850
2. Dissasembly Videos (I advice you to watch them repeatedly before dissasembly):
http://www.youtube.com/watch?v=6d7ETMfgq2s
http://www.youtube.com/watch?v=dE81IaQHEHc
3. Phillips screw driver( for dealing with hard screws around the screen): Because I don't want you to use the low quality screw driver supplied with the digitizer.
4. Double sided tape: I got mine from a hardware shop for only P19. Buy a the more expensive tape(P100+) but look for a very thin one! You will use the cheap weak tape to stick some internal parts and use the Hard tape to stick the external casing. EDIT: I just used the cheap one for everything and it's strong enough.
5. PATIENCE: Don't be in a hurry. I even paused from time to time to get a better idea about what to do next. Get the feel of being a perfectionist (that same additude when I applied a screen protector )
That's the guide from me who haven't dissasembled a phone in my entire life but my milestone. So if something bad and technical that happens along the way then my knowledge can't help.. sorry.
Good luck bro!!
Hey guys.
Lately, my screen has being going insane. Switching between panels, clicking on stuff, lowering the notification bar all on it's own while not responding to my touch input at all!
Weird thing is it happens a couple of seconds after I turn on my screen. So for a few seconds it's fine.
Is there a way to fix that? Maybe the digitizer has either gone kaput or is just dirty?
The digitizer is either broken or there's too much moisture inside.
This topic has been discussed hundreds of times already - look it up please.
Same thing happened to mine... I jus changed the digitizer... I but broke my phone in the process
Sent from my GT-I9100 using Tapatalk 2
Digitizer Problem
Yeah, you just have to change the digitizer. This happened to me twice on the milestone. You could send it for repair, and i do not think it would cost much if its only the digitizer.
Do I need to take the whole phone apart to get the digitizer or is there a way to unscrew the screen directly?
The entire phone must be disassembled to reach the digitizer. The only problem is that sometimes it's not the digitizer that's faulty, but the flex cable, that becomes used in time. So, I suggest you to open it and see if there are any signs of degradation (it's a black ribbon that holds the sensors and the phone calls speaker). If there are, I suggest you to replace that, and not the digitizer itself.
max_3000 said:
Do I need to take the whole phone apart to get the digitizer or is there a way to unscrew the screen directly?
Click to expand...
Click to collapse
Look for video on YouTube.
-CM7 on DInc2