Related
Hi Guys,
My apologies if this has been posted already, but I couldn’t seem to find anything on it.....I have had my Diamond for about 2 weeks and the camera hardly ever works. 90% of the time when i start it all i get is the Photo logo and then a blank screen. If i push the capture button, a few seconds later I get the error "Unable to capture photo. Unable to get frame data from camera device". I have done the latest HTC official update to ROM 1.93, I have soft reset and hard reset and no luck Sometimes if I do a soft reset it will work for a little bit and then just stop working again.
Any advice would be greatly appreciated!!
Thanks
Grim
you may need to install one of x-dev custom ROMs, or try hard reseting your diamond. if the problem still exist after Hard Reset, probably it is hardware trouble.
read read and read before you install Cooked roms from xda-developers. you need to do HardSPL before instaling any other ROMs
Thanks for the response!
I have hard reset the device a few times, and no luck. I dont reallt want to install a cooked ROM, I dont think I can handle it to be honest. I will take it that it is a Hardware fault and I will be sending it back tmrw. Thanks again!
Hi Grim! I have the same problem. I've installed 1.93 official ROM and even SwiftBl 7.5, I've upgraded my Radio From .05 to .08 , but my camera is still like yours.
Have you find a solution? Did HTC service Center change your device?
Thanks..
İ have the same problem and could not find a solution for it...
Dear All,
I have same problem. Camera crashes after 1 or two photo. I have black screen.
Tried many Rom's. no fix .
How could you fix ?
anyone got a solution for this problem?
is the diamond camera hopless?
no solution for this error till now?
This issue realy bugs me now. Every time I've change the OS it work for a bit then it dies. realy anoying. Anyones suggestion may be usefull.
If it is the hardware - is it the camera? Could it be just gone loose?
There´s few steps to take.
If camera works sometimes, I think, it´s not a camera problem on itself.
(IF YOU HAVE ACCESS TO PARTS AND YOU KNOW WHAT U`RE DOING)
Try this:
Exchange flex and flash (use official RUU htc).
Or:
Put phone inbootloader, disconnect flex from board (while working and booloader on) and flash.
If everything else fails, I´m affraid the PCB has internal flash IC problems.
Dont have parts but will open it and check flex. If flash is gone how come mtty does not flag some segments as bad. Checking around the web looks like I am not the only one with this problem.
all you Coders... please help us with the camera issue.
Hey guys..
this camera for touch diamond is screwing..
tried various methods.. flashed everything possible..
still no luck..
if any xda user outthere.. who has the solution for this problem..
please help up..
my device is out of warranty..
thanks
I've found out if you take the battery out for 10 secs and put it back the camera works again untill you run another app. It feels like as soon as you run something else with camera it is screwed!
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
might be "m2d" not compatible ... hair wired ..
I wonder ..whether we can install window CE from pc to h/p through usb link ...
"Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts"
r u using original usb cable ..b'cos now a day I saw many only using normal "small" usb cable head which easily spoil the connector at phone ... too loose for that sharp..
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Go to Start/Settings/System/Clear Storage
and your usb is probably whack
@kaiserII...your usb is whack, haha. that **** made me laugh.
having same exact issue
ya it happened to me sunday night, having exact same problem. keyboard doesnt work, and my front buttons dont work exept for the the center button which ends up opening the start menu (wrong command). Im over my 1 year warrenty and not sure what to do. Had to buy a cheap 40 dollar nokia for the time being, please help if someone can. Oh and I did a hard reset, and it didnt fix anything. Booted android with it and 1 out of 5 times the buttons came back, this is really weird/vexing.
l3urton32 said:
Ok, this might be the first real problem I've had with my tilt, in a sense that I have no freakin clue what happened or how to fix it. The front buttons on the tilt as well as my keyboard decided they wanted to stop working and I have no clue how to bring them back... let me start from the beginning.
I installed m2d about 2 weeks ago, its kind of laggy but I'm still impressed with the overall UI as it compliments the tilt. Some bugs started popping up here and there but through the forum I was able to make it run relatively smoothly. Last night my tilt wouldn't connect to my computer, the usb contacts might have gone bad or something, it only works when I put pressure on the cable to keep the contacts together. Than today my screen would wake up for no reason, with no programs or application running in the front or background of the device. It was annoying to say the least. Than I got my first text of the day and went to respond using the actual keyboard, no dice. No response from the keyboard. So as Im typing using the stylus I tried to delete something, and the backspace button on the touch keypad isn't working, so more problems. I want to try and hard reset the device to see if that fixes the problem, but since I can't use the hard buttons on the front of the device I can't hard reset (the scroll wheel, ptt, and ok buttons aren't working either) Is this anything anyone has ever heard of? My tilt is kind of battered after a year of use, but nothing significant has happened within the last month to make me think that something inside came loose, especially since this just started today and it was just sitting on my table all night. I appreciate any and all help. Thanks in advance.
Click to expand...
Click to collapse
Exactly the same thing has happened to me!! Coming on randomly, draining the battery really quickly and the same keys doing the same things as yours i.e. nothing or Start menu. The backspace and space don't work on the on-screen keyboard either. Is it the end of the road or has anyone the slightest idea what the hell to do!?!?!?
Same issue but slightly different
2 days ago I started hearing a noise from my phone that was not something I normally hear. After checking my phone I found out it was the voice recorder program opening up on its own. It started repeatedly doing this and recording automatically. I had to hold down the close option (X) and before it would stop. AFter a reset and when the phone wakes up it always does this now. Along with all these whacky problems my hard buttons stopped working. My scroll wheel and D-pad sometimes work and only the up, down, left and right arrows work on the keyboard. Camera button seems to work sometimes also. All others have stopped responding. Except for holding the power key. I just reflashed my phone to latest phoenix ROM and problem is the same. Is this it for the phone or is there a fix.
Anyone??? Please!!
Try this free fix
I had the same problem as the original poster. My fix was to download AE Button Plus trial and use it to reset my keys to their original setting. I did not have to do the keyboard, just the external keys. Now my tilt works like it used to.
This fixed the problem when clear storage and reloading roms did not.
It doesn't hurt to try since the trial is free.
Good Luck,
Will
same here... help pls...
any one yet has found a solution for this issue??? 2days ago my Kaiser suddenly started with same problems, buttons dont work and the recorder goes on, any one yet found a way to fix it??? thanks...
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
didnt work...
dantegl36 said:
I have no idea if this will actually help anyone but I installed japanese input on my kaiser once and during the process a registry got edited that stopped my hardware keyboard and the hardware keys (front keys) from working and the fix was to correct the value:
[HKEY_LOCAL_MACHINE\System\CurrentControlSet\Contro l\Layouts\e0010411]
edit the 0010411 value to "00000409"
again I have no idea if this will help but it wouldnt hurt to check to see if the registry somehow got changed. Goodluck and I hope you guys figure it out.
Click to expand...
Click to collapse
thanks anyways "dantegl36" but it didnt work...
I have the same issue
This is intresting, I just posted on this, as I am having the same issue, which of course just started a few days ago. I have the updated UI as well but I installed it as well.
Any idea how to fix it??
keyboard fix "edfc" problem
yes , kaiser tweak slide wake disabled ...it OK
Greetings from Olsztyn Poland
Unfortunately, the problem returned it was only a temporary improvement, sorry
For my tytn2 after rom upgrade, the front buttons do not respond except the central one. the side buttons are responding under the win only but in the bootloader screen they don't respond. and I cannot make a hard reset.
I did a hard reset through the setting menu but still the problem has not been solved. Adding on that the keyboard doesn't work except the arrow keys.
Do anyone can figure a solution for that. except the hardware problem bec I am out of warranty.
Did anyone was able to solve the problem fully?
oo wow, i have the same problem. hope theres a fix
adding to that the the bluetooth is turnino on by itself even if I switched it off and the device by itself after time of switching it off it refuse to start again unless I did a soft reset.
I tried all the avilabe suggestion but nothing worked.
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
samstables said:
Hiya
This seems to be a problem with the TyTn II - there are several threads in this forum about it, none of which have any working solutions that I ever found...
I spent ages trying different ROMS, Radios and pressing of buttons and haven't found a solution - other than to disown the TyTn II and get another phone! I did pick it up again the other day and it is still refusing to have working buttons or keyboard (as reported by others, only the central buttons seems to work all the time as a Start Menu button).
I did manage to stop it eating battery at a ridiculous rate by turning it to specific radio settings rather than letting it find its own GPRS/ 3G and phone band. I think it was in this thread
I was considering sending my TynTn II to HTC, but I'm not sure it's going to be worth the postage and their service fees as I've already replaced it with a Touch Pro 2. Then again if we ALL sent them in, they might acknowledge some sort of problem with this model.
Click to expand...
Click to collapse
can I know how did u mange to change the rom? bec even my side buttons refuse to work whenever I am at the bootloader screen and the upgrade through the active sync failed.
Hey there i was hoping some one could help me out. I have 2 things
1.) The Battery Icon on the top bar does not update at all. It just shows a full charge no matter how much charge my phone has, When I plug it in it doesn't change to charging either. If I go to battery properties I then can see how much charge my phone has. Anyone encountered this?
2.)2 buttons on my key board are reversed. The 2 Fn Blue buttons "!" and "@" are reversed, how do I change those?
I am on rom version Stylez Black WM 6.1 Full v.3 Beta 2
http://forum.xda-developers.com/showthread.php?t=545821
and the last program I installed was S2U2 v2.04
http://forum.xda-developers.com/showthread.php?t=545821
Thanks for any and all help
Could be that you have the kaiser keyboard and not the Tilt.
Hmmmm, thats intresting
well my model # is kais100 and its HTC 8925.
is there still away to re-assign keys so I can fix this problem?
well if it's the problem that I think it is.
search + tilt keyboard problem = win!
ChumleyEX said:
well if it's the problem that I think it is.
search + tilt keyboard problem = win!
Click to expand...
Click to collapse
It is also addressed in the faqs on the first page of the rom. Why people throw their phone in to the fire with out even spending 5 min to read the faqs is still beyond me. I have flashed my phone well over a hundred times and I still read the entire first page of any new rom I am flashing, to see what I am getting into with my $500 phone.
As far as the taskbar icons go, could be a bad flash, could just be a phone hiccup, no one else has had that problem with the rom. Try a hard reset or reflash the rom.
Thanks for the fast responses! I totally missed the keyboard fix on the FAQ, I got everything else (including the Radio from the FAQ) but that slipped by me.
now I am still new at tweaking my phone so will a hard reset restore all my setting and I will have reinstall all my programs I downloaded?
Just Figured out a Hard Reset will Erase all my Data. So no one else has had this problem...hhmmmm... It has to be one of the programs I installed, Maybe if I uninstall them 1 at a time ...... anyone else got any Ideas?
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
luisdesigns said:
Hey guys, i looked all over for an answer before posting this here , but no luck.
This is what´s happening, i have a kaiser tytn II which i had problems, was going extremely slow, i removed some apps that i had installed including tomtom and same thing, so i thought about the soft/hard reset, i did it, and now......its crazy, i can´t use the touch screen, example : i want to enter my pin code and when i press number 6, it only presses number 2. its like the whole thing is messed up and the theme is really ugly, grey color . I thought maybe i could install a new firmware with a nicer looking and might solve the issue, but i don´t know where to get it and how to install it. Could someone help me how on some tips please ?
Thank you so much in advance
Click to expand...
Click to collapse
Maybe if you start sharing what rom are U using My advice is that you definitely should flash another rom or reflash your stock rom to solve the issues you are experiencing. Please read the sticky of how to do it
you can reset it to factory settings (the ROM you last flashed that is) by this method:
press and hold the two upper hardware keys next to your call end and call button. While pressing and holding them do a soft reset. A white screen with blue text should come up. Press the green call button and wait for it to reach the screen after the percentage screen. Then press the green call button again and it will be like it first was out of the box (or when you flashed a ROM).
Kaiser tytn II
The soft reset that exactly what i did and that´s what screwed up my kaiser , i am going to re-flash it , i will look on how to do it and will have a try.
ok, one slight problem, i have a macbook all i find is for pc
luisdesigns said:
ok, one slight problem, i have a macbook all i find is for pc
Click to expand...
Click to collapse
You'll either have to create a partition and install windows on it or flash via sd card. Link here to get you started:
http://forum.xda-developers.com/showthread.php?t=433835
thank you so much, i will try it this evening from my pc hope it fixes the issue. Will let you know
Hi guys,
today I (again) used Task29 because the phone behaved strange (didn't find certain files anymore....again).
But this time its quite different. After finishing Task29 I wanted to enter the bootloader to flash the rom from my sd-card (\kovsimg.nbh)....but it won't start holding vol-down + power!!!
It does start normally, but hangs (due to no rom) at sony ericsson logo.
I can do hard reset, but as no rom is on the internal mem, it doesn't have any effect.
I need the bootloader, but it simply doesn't react on the key combo!
Has somebody got any idea?
I mean, it can't be bricked as everything else works like it should, right??
I have OliNex 0.72 since last couple of rom-flashes (~6). Been doing this for a while now....but each time successfully.
Please give me some feedback!
Thank you!
greets,
Andicp
the problem maybe on your Volume down hardware botton... try to reassamble the x1 and try to change the volume down hardware.. but you must have skill to soldering the hardware.. if you doesnt have the skill just go to phone service.. to change the volume down hardware...
ahmadin said:
the problem maybe on your Volume down hardware botton... try to reassamble the x1 and try to change the volume down hardware.. but you must have skill to soldering the hardware.. if you doesnt have the skill just go to phone service.. to change the volume down hardware...
Click to expand...
Click to collapse
Thanks for your reply!
But then it would act as if I'd push only the power button, right? And the Vol-Down button worked before that.
It simply doesn't react by using this key combo.
If I press power button alone, it switches on normally.
Any idea how to solve that?? Please help!
After some research it looks like I would need a Jtag box and adapter for the X1 plus any Jtag-Software to get a new bootloader onto the phone. This will be prolly around 250€ all together.
...so I'd say my beloved X1 is finally (after almost 2 years of usage and flashing fun) bricked.
I don't know how this happened but i am facing the truth right now.
Only way to revive it: Does anyone know a repair-shop in/ close to Munich which has the equipment??
AndiCP said:
After some research it looks like I would need a Jtag box and adapter for the X1 plus any Jtag-Software to get a new bootloader onto the phone. This will be prolly around 250€ all together.
Click to expand...
Click to collapse
wow... very expencive... in my country its only cost 150 euro
if i go to phone service and try to fix it there its only cost 15 euro
hi
consider these threads for additional info on this issue:
bootloader issues
probs entering bootloader
hope that helps
Draken Korin said:
hi
consider these threads for additional info on this issue:
bootloader issues
probs entering bootloader
hope that helps
Click to expand...
Click to collapse
Thanks for your reply!
But first linked thread implies that you can enter the os.
Second one uses cam-button instead of vol-down button, but thats not my problem as my vol-down button is working.
But this confirms that my problem really is the bootloader itself.
So, no luck so far.
Thanks for your help anyway!
fastboot not an option? or has SE that not?(download mode ect)
edit: forget that its an x1. and not an x10. sorry my fault