Where's Qtek 218 English ROM? - 8125, K-JAM, P4300, MDA Vario Software Upgrading

Does anyone know where I can find the 2.18 WWE ROM or even if it exists?
Thanks.

forcedalias said:
Does anyone know where I can find the 2.18 WWE ROM or even if it exists?
Thanks.
Click to expand...
Click to collapse
QTek's last release was 2.17

I know, I'm looking for 2.18.

All available roms are on the FTP.
Last version for WWE is 2.17
Other langiages its 2.18
There is no difference in build however between these 2.17 and 2.18 versions (I have read).

Kinda stupid that they don't give them the same version number then.
I hate it when they do that.

forcedalias said:
Kinda stupid that they don't give them the same version number then.
I hate it when they do that.
Click to expand...
Click to collapse
The first minor version number position is unique to carrier or reseller.

Related

change rom for 8125

I have a cingular 8125 I unlock it and use it in my country (not cingular) it works fine.
my question is:
can i install a rom from another company (I don't care about the cingular configurations)
and if so what rom is the best?.
thank you
yes you can, use the aWizard app found in this forum. i'm using the qtek 1.6.7.1 rom and radio 1.13.10 on my imate kjam i chose this rom cuz i read an article that someone posted which compared 3 / 4 roms with each other and 1.6.7.1 has the fastest speeds with Edge and so forth, so i chose that combo.
my cousin is using the QTEk 9100 with its firmware in the US with cingular no problems. but i wanna get the cingular 8125, and i wanna unlock it to be used anywhere and everywhere i go, so how did u unlock it and is the firmware change enough to unlock??? plz reply my 8125 is coming by the end of the week
program to unlock 8125
go to this link follow direccion and that is it
http://forum.xda-developers.com/viewtopic.php?t=33796
my rom is # 1.8.11.1 wwe is the rom that you are sying here newer becouse the number is lower that the rom that i have?
wuilly said:
my rom is # 1.8.11.1 wwe is the rom that you are sying here newer becouse the number is lower that the rom that i have?
Click to expand...
Click to collapse
my 8125 came preloaded with the same ROM and i killed all the Cingular customizations as soon as i took it out of the box
would the Qtek 1.6.7.1 ROM be a big difference for me? i dont use EDGE or GPRS. only wifi and BT. is it worth the upgrade and reinstalling all my apps?
blazin-asian said:
wuilly said:
my rom is # 1.8.11.1 wwe is the rom that you are sying here newer becouse the number is lower that the rom that i have?
Click to expand...
Click to collapse
my 8125 came preloaded with the same ROM and i killed all the Cingular customizations as soon as i took it out of the box
would the Qtek 1.6.7.1 ROM be a big difference for me? i dont use EDGE or GPRS. only wifi and BT. is it worth the upgrade and reinstalling all my apps?
Click to expand...
Click to collapse
i understand the fact that the settings might be good as cingular sends them, but i dont stand that annoying x thing it sucks, unlocking and reloading the software is my goal.

SO MANY ROMS!WHICH ONE IS THE BEST FOR QTEK9100?

Hi guys,sorry to bother the experienced and experts out here,but which ROM is the best for Qtek9100 english device?I checked on ftp and there are so many Roms that I don't know one is the latest and trouble free.
I'm counting on your helps.
i have a qtek9100 too and since i updated it to cingular's 8125 Official AKU2.2 Firmware i am truly satisfied, so i recommend you to do the same
Can it be loaded to any 9100? (xda,mda etc.)
devilboy1488 said:
i have a qtek9100 too and since i updated it to cingular's 8125 Official AKU2.2 Firmware i am truly satisfied, so i recommend you to do the same
Click to expand...
Click to collapse
read the post above you!
raven2000 said:
devilboy1488 said:
i have a qtek9100 too and since i updated it to cingular's 8125 Official AKU2.2 Firmware i am truly satisfied, so i recommend you to do the same
Click to expand...
Click to collapse
read the post above you!
Click to expand...
Click to collapse
yes... i kind of answered didn't i?
and aggeloppas, i think you can load it to any 9100, just be sure to unlock your CID first
But there is no problem with getting a simlock again?
I have a tmobile vario (dutch) it was one of the first so it would not be a 4g wizard. is it save to upgrade? I'm running now qtek rom 2.17.7.2 WWE.

What makes a AKU2 ROM different? And a couple other ?s

Hello,
I just recently picked myself up a T-Mobile MDA and am now feeling comfortable enough to flash my first ROM. I have read, searched, and printed may of topics on this site and a few others but I have a few questions I was hoping you guys could help me with.
First, What makes a AKU2 ROM different from a non-AKU2 ROM? And for that matter what makes the AKU3.2 ROM different?
Also, When it is said "this ROM is for SPL/IPL 2.xx G3 phones only" does this mean that it is for any SPL/IPL that does not have the trailing .0001 (thus making it a G4 phone) and it would work with a 1.xx G3 phone? Is there a change log somewhere?
Finally, once a phone is CID unlocked I gather that it is for the most part permanent? In other words if I were to upgrade to say a newer AKU2 ROM would that then forbid me from downgrading back to my original 1.8.10.2 WWE ROM? I have read that posts indicating that you would be able to downgrade to 1.03 and then upgrade, I just want to confirm that I am understanding this correctly.
I currently have some pretty old ROMs on this stock MDA:
IPL: 1.08
SPL: 1.08
RADIO: 01.09.10
ROM: 1.8.10.2 WWE
I am really excited to upgrade the ROM on this thing if for no other reason than to upgrade the Radio ROM! ROM 2.47 not withstanding, Radio ROM 2.25/6 included in most of the custom ROMs must be a huge improvement over 1.9.10.
Thanks for any help you can provide.
Tom
First, What makes a AKU2 ROM different from a non-AKU2 ROM? And for that matter what makes the AKU3.2 ROM different?
Click to expand...
Click to collapse
AKU2 roms are push email enabled they also have stereo bluetooth support, now AKU3.2 roms have improved bluetooth drivers and lots of "other" improvements
Also, When it is said "this ROM is for SPL/IPL 2.xx G3 phones only" does this mean that it is for any SPL/IPL that does not have the trailing .0001 (thus making it a G4 phone) and it would work with a 1.xx G3 phone? Is there a change log somewhere?
Click to expand...
Click to collapse
Yes that is correct
Finally, once a phone is CID unlocked I gather that it is for the most part permanent? In other words if I were to upgrade to say a newer AKU2 ROM would that then forbid me from downgrading back to my original 1.8.10.2 WWE ROM? I have read that posts indicating that you would be able to downgrade to 1.03 and then upgrade, I just want to confirm that I am understanding this correctly.
Click to expand...
Click to collapse
Once again correct, its a "once in its lifetime" event
ratcom said:
AKU2 roms are push email enabled they also have stereo bluetooth support, now AKU3.2 roms have improved bluetooth drivers and lots of "other" improvements
Click to expand...
Click to collapse
I have AKU2.6 and have push email but no bluetooth stereo.
Started a thread in Hacking and Development asking for help/why. No luck yet. I've tried every hack I could find.
So from what you are saying the support is in the AKU 2.6 ROM ,
but Samsung, Sprint or some other "confounded wingnut" decided not to take advantage of or /implement it !?!
BOY, DO I HOPE THEY RELEASE AN UPDATE!
Ratcom,
Thanks for the quick reply bro! Very helpful stuff.
A though of another question if you don't mind....
What the does SPL/IPL stand for and what do they each do? I know that they are bootloaders but why the need for two? Is one for the PDA ROM and one for the radio ROM? Kinda meaningless question but I was just curious. Thanks again.

Should I upgrade?

I just got my T-Mobile MDA from eBay. However it seems pretty slow. After reading the ROM upgrades threads, I want to ask if there is a ROM out there that has T-Mobile stuff integrated? Also, what else can I upgrade from the list below:
ROM Version: 2.26.10.2 WWE
Radio Version: 02.25.11
Protocol Version: 4.1.13.12
ExtROM version: 2.26.10.105
tariq_niazi said:
I just got my T-Mobile MDA from eBay. However it seems pretty slow. After reading the ROM upgrades threads, I want to ask if there is a ROM out there that has T-Mobile stuff integrated? Also, what else can I upgrade from the list below:
ROM Version: 2.26.10.2 WWE
Radio Version: 02.25.11
Protocol Version: 4.1.13.12
ExtROM version: 2.26.10.105
Click to expand...
Click to collapse
well firstly, u need to get it CID unlocked, u can find the thread as a sticky to get that done...after that, u wanna do some research on which ROM would suite you best...there are several out there...and as for the tmobile stuff, there are indiviudal cabs u can download to install what uw ant from the Tmobile extROM...
@tariq_niazi - For fun why not keep this ROM (as it's the latest T-Mobile) and install Molski's two registry cabs? Will make a world of difference with little work on your part (and it's still stock)
http://www.molski.biz Look for HTC Wizard and then My Cab Files.
(btw, site isn't IE friendly, suggest you use Firefox)
Dr Puttingham said:
@tariq_niazi - For fun why not keep this ROM (as it's the latest T-Mobile) and install Molski's two registry cabs? Will make a world of difference with little work on your part (and it's still stock)
http://www.molski.biz Look for HTC Wizard and then My Cab Files.
(btw, site isn't IE friendly, suggest you use Firefox)
Click to expand...
Click to collapse
Steven...didnt check out my site last few weeks?
If the Java menu does not work (if no Java is installed or using IE7) you can click a button to change the menu into a PHP menu that works 100%
Malik05 said:
Windows Mobile 6 Crossbow
T-Mobile MDA(WIZA200) G3
IPL/SPL: 2.26
Radio: 2.47.11
OS:10.1.0.811
Overclocked bs 299MHz(260MHz)
Click to expand...
Click to collapse
How in the world did you first overclock your phone to such high frequency? And secondly is the WM Crossbow stable and where did you get it from?
tariq_niazi said:
How in the world did you first overclock your phone to such high frequency? And secondly is the WM Crossbow stable and where did you get it from?
Click to expand...
Click to collapse
I always run my Wizard on 299Mhz (with WM5, WM6 or every other Rom)

Help download the right WWE ROm for CHT9100

Hello all..
NewB asking for help..
I bought HTC9100 preinstalled with the following WWE ROM.
1.25.000.TE
02/14/07
RADIO VER 1.38.00.11
PROTOCOL VER 32.71.7020.12H
Its a Taiwanese model. I tried to upgrade to WM6 with a wrong ROM and it screwed up everything.. Stopped working completely(Red, green, blue screen)...
I registered with HTC-Taiwan site and could download only a Taiwanese version ROM. I installed Taiwanese ROM.. Atleast the phone is working though i can not understand a single letter in Taiwanese....
Where can i download a WWE ROM for CHT-9100 Taiwan make. Is there anyway i can download the same ROM I had(the above mentioned)..?
I googled all the day and could not get a clue...
I am very sad.. Any help is genuinely appreciated...
thanks
babuap
babuap said:
Hello all..
NewB asking for help..
I bought HTC9100 preinstalled with the following WWE ROM.
1.25.000.TE
02/14/07
RADIO VER 1.38.00.11
PROTOCOL VER 32.71.7020.12H
Its a Taiwanese model. I tried to upgrade to WM6 with a wrong ROM and it screwed up everything.. Stopped working completely(Red, green, blue screen)...
I registered with HTC-Taiwan site and could download only a Taiwanese version ROM. I installed Taiwanese ROM.. Atleast the phone is working though i can not understand a single letter in Taiwanese....
Where can i download a WWE ROM for CHT-9100 Taiwan make. Is there anyway i can download the same ROM I had(the above mentioned)..?
I googled all the day and could not get a clue...
I am very sad.. Any help is genuinely appreciated...
thanks
babuap
Click to expand...
Click to collapse
Try the Wiki: http://wiki.xda-developers.com/index.php?pagename=HTC_Trinity
under eveilable ROM versions you should find what you need!
The closest match i could find is the below ROM
Cooked version Lvsw**
English HTC_001**
1.25.000.2
1.38.00.11
GGPS enabled - YES
People, Has anyone tried this or any ideas.
I think you can ignore about your current ROM version and install any WWE ROM you want including WM6.
Correct me if I am wrong.
babuap said:
Hello all..
NewB asking for help..
I bought HTC9100 preinstalled with the following WWE ROM.
1.25.000.TE
02/14/07
RADIO VER 1.38.00.11
PROTOCOL VER 32.71.7020.12H
Its a Taiwanese model. I tried to upgrade to WM6 with a wrong ROM and it screwed up everything.. Stopped working completely(Red, green, blue screen)...
I registered with HTC-Taiwan site and could download only a Taiwanese version ROM. I installed Taiwanese ROM.. Atleast the phone is working though i can not understand a single letter in Taiwanese....
Where can i download a WWE ROM for CHT-9100 Taiwan make. Is there anyway i can download the same ROM I had(the above mentioned)..?
I googled all the day and could not get a clue...
I am very sad.. Any help is genuinely appreciated...
thanks
babuap
Click to expand...
Click to collapse
Hi babuap,
I am looking for the latest CHT9100 WM6 Trad Chinese Rom, appreciate if you could upload the rom for download. Thanks in advance.
For yr info, you can purchase IMEI-CHECK to unlock your phone to flash to any D810 roms. It works as I have purchase it.
www.imei-check.co.uk.
Thanks again
babuap said:
The closest match i could find is the below ROM
Cooked version Lvsw**
English HTC_001**
1.25.000.2
1.38.00.11
GGPS enabled - YES
People, Has anyone tried this or any ideas.
Click to expand...
Click to collapse
Go with the WM6 version of Dopod Chinese ROM - it's the best chinese ROM available for the device. The CHT 9100 is identical to all of our devices - so the ROM can be the same. Flash with HARD-SPL and you can choose whichever ROM you want.

Categories

Resources