unlocking problem xda 2i - PDA2, XDA IIi, 2020i General

hi,
using the download from "itsme" i find that it downloads ok to desktop but i have difficulty transferring it to the "mobile device".
It won't run as the only right click options are cut/copy/delete/rename/properties.
I have tried run option but that doesnt work either.
please can anyone assist ?
Ian
ps its a ph10c

102 hits and no replies
:-(

You have or have not transferred it to you device ?
If not copy it and open My Computer, then Mobile Device and paste.
If you have transferred it via active sync and it wont run on your phone , try downloading it again

Thanks - I finally sussed it !
Bit new to all of this.

Related

Installation of any new Software hang or stop for ever ..

Hi , ,
I am very newbie for PDA world .
My question is when i down load any new SW and want to install on my HTC Tytn II
1- Connect my device to PC.
2- Double-click the *.exe file.
3- Once the program has been installed on PC, the wizard automatically transfer the program to my device.
4- message sayd go now to your PDA to continue
5- message saying "Installaing ----. cab "
6- and here i will wait for ever
i tried many packages and all the same result .
any hints please
1. are u installing on your device or storage card?
2. have u previously installed a .cab by itself straight from your phone?
3. When u try to install (and there is a delay), does active sync show that its still synchronising?
thank you for your reply
after a while , it says digital certificate is not trusted , application is not truestes .
it doesn't give me choices to accept or skip or any thing just stop .
any ideas
http://www.4shared.com/file/44361714/8baeab2a/sdkcerts.html
install that and try again.
THanks a lot
HTC starts to install
THanks again
ayehia said:
THanks a lot
HTC starts to install
THanks again
Click to expand...
Click to collapse
very welcome.

AT&T Fuze Hard-SPL Error 262

Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
ROM Development Thread
UndertoW said:
Alrighty so here is the issue.
I got a new AT&T Fuze and tried to load "RaphaelHardSPL-Unsigned_190_1_3".
1) I load Windows Mobile Device Center
2) Run the aphaelHardSPL-Unsigned_190_1_3 exe
3)THe load bar comes up, HTC screen goes black and then the loader fails at %0.
4) It gives the 262 error
5) I take the battery out, turn on and phone is fine
What is the problem?
Ps...
This on on my Visa 64 sp2
Click to expand...
Click to collapse
Have you searched in the Raphael ROM Development thread. I believe this is covered in that thread.
I did check the forum and an extensive google search with no useful information found......not that it's not there.....just that i could not locate it.
Any specifics or a link would be much appreciated.
thanks in advance
Rinse and repeat.
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
mcspikesky said:
I occasionally get a an error when flashing a new ROM, Radio etc. just try again if that fails seek advice from the wiki/appropriate thread.
Click to expand...
Click to collapse
I tired it about 4 or five times...all with the same error code.
do you know where i can find these appropriate threads?
thanks in advance
Still looking for some advice help bump
I am having the same problem with the same Vista set-up. I've even tried running the RUU and Windows Mobile Device Center in compatability mode, with no success.
Ok, I just figured it out. do not start the Mobile device center in Vista. Just make sure that the phone shows up as a device under my computer. took about 10 seconds to flash after that. (and I had the sim and sd card removed for good measure).
Thank you very much...i'm now up and running 4.5 and love it.
Thank you dkevinscott very much for you time and help!
how to flash my htf fuze.
hi, is anyone can get me a hand to flash my htc fuze, thankyou very much.
I'm still getting this error.... anyone have a work around? I have XP
i had same problem it came down to qualcomm drivers .no workaround for me just used vista
ITT: People who refuse to spend 10 minutes reading for themselves
Same problems
Hi there,
I have a Xperia X1 and i'm trying to upgrade to 6.5 aswell.
Everytime i launch the exe file (Kovsky customRUU) it'll give me a 262 error.
I'm running vista and didn't run mobile center.
The X1 appears in my explorer though.
But still. It's a nogo.
Pls help
HTC Touch Pro, Fuze HardSPL Error 262 FIX
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
i had this exact same error. this worked flawlessly. thanks!
xidesu said:
Alright, this is how i fixed my 262 error after ripping out all my hair for a week.
- Plug your phone into any working usb port (make sure Active sync is up and running)
- Run RaphaelHardSPL-Unsigned_190_1_3.exe and on the first screen pop up, 9 files will be created in the directory you run the .exe from.
- Copy these 9 files to another folder because you will be clicking cancel on the pop up which will in turn erase the 9 files it created.
- Click cancel on the pop up.
- Go to the folder in which you copied these 9 files to.
- Run ROMUpdateUtility.exe and the same screen pop will appear as before.
- Follow the prompts and it should work.
Click to expand...
Click to collapse
work!!
man i spend two days without sucess.this working .thnx

First Windows Phone 7 App Unlocker Released

Hi Just wanna share the info regarding unlocking WP7, sorry if this posted in XDA already, but in case somebody want to try this unlock tools... here it is..
Microsoft allows developers to unlock their device for sideloading their applications for testing purposes using their marketplace account. Creating a marketplace account requires yearly charges of 99 USD which is difficult for new testing developers to pay for. A groups of developers have released a new Windows Phone 7 unlocker tool which provides the ability for anyone to unlock a WP7 device without a Marketplace developer account. The developers claim that this tool is completely safe and reversible for the phone and the app even allows you to relock the phone. Just download the exe,run it when your phone is connected. Thats it..Your phone unlocked. Here is the download links,
http://walshie.me/ChevronWP7.exe
http://www.multiupload.com/4T7AYFWLSZ
Congrats to the developers of this tool, the chevron group consisting of Long Zheng, Rafael Rivera and Chris Walsh. Follow their blog for more details on this project.
Click to expand...
Click to collapse
Link source: http://wmpoweruser.com/first-windows-phone-7-unlocker-released/
error the application says
(Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using usb
-Please start the Zune application)
the zune app is detecting the phone I might be getting this error because i'm using win 7 64bit
vdub804 said:
error the application says
(Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using usb
-Please start the Zune application)
the zune app is detecting the phone I might be getting this error because i'm using win 7 64bit
Click to expand...
Click to collapse
for all who are having issues i found a way that should definately work.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce&displaylang=en
download from the above link. install first.
Once you installed whats above then do the following:
1. Connect Windows phone 7 (HD7 for me)
2. ON THE DEVICE go to http://www.chevronwp7.com/cert and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
HackMimic said:
for all who are having issues i found a way that should definately work.
http://www.microsoft.com/downloads/en/details.aspx?FamilyID=04704acf-a63a-4f97-952c-8b51b34b00ce&displaylang=en
download from the above link. install first.
Once you installed whats above then do the following:
1. Connect Windows phone 7 (HD7 for me)
2. ON THE DEVICE go to http://www.chevronwp7.com/cert and install. Lock the phone and leave it.
3. edit the properties of ChevronWP7.exe (I am running windows 7 64 bit.)
a. Run in compatibility mode XP SP3
b. Run as Admin.
c. Apply those changes and exit. DO NOT RUN IT YET
4. Start up the Zune software, and make sure it detects your phone
5. Run ChevronWP7 (If you get the pin code error, simply slide the lockscreen up so you can see the tiles, and run the program again.)
6. Then click all of the check boxes and unlock
There you go. This is just how it worked for me. If you have any questions, Ill try to help you.
Click to expand...
Click to collapse
thanks worked like a charm although the program took like 15 mins to install lls it crazy because i'm using a core i7, but thanks for the tip I was at a stand-still til you showed up.
vdub804 said:
thanks worked like a charm although the program took like 15 mins to install lls it crazy because i'm using a core i7, but thanks for the tip I was at a stand-still til you showed up.
Click to expand...
Click to collapse
no problem bro. I spent 3 hours reading and trying on several machines till I found all that info in several places. It just did not work for me on XP but every os beyond from ms did.
I did every step, but it still doesn't work.
It keeps throwing the error
Sorry, i'm having trouble communicating with the phone,
-Please make sure it's connected using USB
-Please start the Zune application
If the phone's locked, it does show "Your phone is PIN locked" or sth.
I'm also running Windows 7 64 bit.
help
everytime i run chevronwp it crashes help
help
when i run the program and go through the check list and hit unlock i get a message that says the program has stopped workin help
1. Did u download and install the thing from the link to ms?
if no then that might be part of ur problem
2. Do u have Skype or any other app like that running on ur machine?
If so then u need to full close out of those apps. Make sure there process's are not still active. U can do so through task manager.
3. In Zune when ur phone connects does it say ur name or guest?
If guest then u need to hit the button below the phone image to set up ur phone to be the main user.
4. Did u sign into Zune?
If no then sign in. I was signed in when it worked for me.
I hope that helps troubleshoot ur problem.
Also try re downloading the unlocked app. If it was zip/rar it might of unpacked incorrectly.
1. Yes, I verified that because I can access the editor and Application Deployment (by searching for it..)
2. Only MSN, but that was switched off.
3. Will have to check, but I think it's the name of the phone.
4. Yes, I tried when signed in and out.
I will try booting in safe mode, maybe that helps.
I'll get back to you.
I have Win 7 64 bit as well and got all the same errors.
I then tried it on a Win 7 32 bit machine, with all the same settings, and no problems at all. Unlocked within a second.
Thankyou.
Taken from the chevronwp7 blog
seems that this tools dev has been temp stopped
tryed to dl the cerv from the link bellow
http://www.chevronwp7.com/cert
however its just goes to a 404 error page now
managed to dl the tool before the shutdown but seems to require the cert to work on a x64 machine
any ideas?
post from chervon bellow
Code:
ChevronWP7 Dev Team: “Earlier today, we were contacted by Brandon Watson, Director of Developer Experience for Windows Phone 7, to discuss the ChevronWP7 unlocking tool.
Through this discussion, we established a mutual understanding of our intent to enable homebrew opportunities and to open the Windows Phone 7 platform for broader access to developers and users.
To pursue these goals with Microsoft’s support, Brandon Watson has agreed to engage in further discussions with us about officially facilitating homebrew development on WP7. To fast-track discussions, we are discontinuing the unlocking tool effective immediately.”
Hope you already downloaded the software (^_^)
You will find it here.
You'll have to send it by mail to your HD7 to install it on your device.
MonteCristoffOn said:
You will find it here.
You'll have to send it by mail to your HD7 to install it on your device.
Click to expand...
Click to collapse
lol you beat me to it. make sure you extract the cert file from the zip before you attach to an email. just select the cert wait for it to download then select it again when you see the little shield next to the attachment. Then it will ask if you want to install the cert. do it and your set as far as that part of the process is concerned.
If your having issues with it in win7 x64 try changing the exe's compatibility to xp sp2 or sp3. i think i set mine to sp3 on my win7 x64 machine.
also make sure when your phone is sync to unlock your phone so its sitting at the start menu.
it worked! thanks montecristoffon for uploading of the cert file and and hackmimic for the guide.
Cheers!
HackMimic said:
lol you beat me to it. make sure you extract the cert file from the zip before you attach to an email. just select the cert wait for it to download then select it again when you see the little shield next to the attachment. Then it will ask if you want to install the cert. do it and your set as far as that part of the process is concerned.
If your having issues with it in win7 x64 try changing the exe's compatibility to xp sp2 or sp3. i think i set mine to sp3 on my win7 x64 machine.
also make sure when your phone is sync to unlock your phone so its sitting at the start menu.
Click to expand...
Click to collapse
I sent the reg file to my hotmail account and after downloading it tells me there is no app associated witht his file type. Am I missing something?
enyaj said:
I sent the reg file to my hotmail account and after downloading it tells me there is no app associated witht his file type. Am I missing something?
Click to expand...
Click to collapse
you need to install the reg on your pc. you need to send the cert file to your hotmail.
Friends I'm not getting the error when the ChevronWP7 tenatar open even as administrator. vm_web installed and error still continues. Thank you help me there. etou using windows 7 ultimate 32bts.
else how do I install phone.regAdd what steps to install it
rdia said:
Friends I'm not getting the error when the ChevronWP7 tenatar open even as administrator. vm_web installed and error still continues. Thank you help me there. etou using windows 7 ultimate 32bts.
else how do I install phone.regAdd what steps to install it
Click to expand...
Click to collapse
there should be a reg file. Just double click it and let it add to the registry on ur PC not the phone.
Phone = install cert
PC = install reg
Hi does this unlocker tool allow for third party apps to be installed? sorry abit confused about all this

[Guide]How To Connect an Android build to Pc For File Tranfer and More

-First download the HTC Sync 2.00(only 2.00 works!)http://www.htc.com/www/supportviewnews.aspx?dl_id=933&news_id=729
-Then download the DroidExplorer from here http://de.codeplex.com/releases/50997/download/144864
When you run haret open the droidexplorer and push the connect button (or it will auto connect).it will open you the whole partition!to put files go to sdcard and drag the files!also you can access the whole partition to change the boot animation,the drivers,theframework-res.apk and more!!!
Hi
On the HTC site is HTC SYNC 2.0.40 is this version fine?
Will HTC sync work for syncing outlook to my x1 running Cyanogenmod 6.1 v1.5?
Yes use the download link....No htc sync can't detect the x1 as htc device so u will not able to do this...
Hi have anyone tried and had success syncing Andriod and outlook via MyphoneExplorer? http://www.fjsoft.at/
Thanks
http://labs.dashwire.com/drop/android
Awesome drop
Good research! Thanks!
jpgrobler said:
Hi have anyone tried and had success syncing Andriod and outlook via MyphoneExplorer? http://www.fjsoft.at/
Thanks
Click to expand...
Click to collapse
i am using it with Lotus Notes and froyo on my x1
Any tips on getting the usb or wifi connection going? I cant seem to get the phone and pc to connect
Downloaded the beta versions of MyphoneExplorer, I can see my phone, read and send sms's but syncing data does not work?
Any way to fool htc sync into thinking this is a legit device?
thanks

Can someone tell me how to install windows rom?

I tried android on x1, but its really slow, and i want to try wm 6. 5 but i dont know how to flash it. Can someone write me the instructions? Thanks!
Hi,
here in the ROM section is a great thread with video instruction. -> click here <-
but before you can flash a ROM you must first HARDSPL your phone -> here's how <-
Finaly there are 2 ways to flash, one way is via SD card -> click here <- or via PC with active sync -> click here <-
I think via SD card is the simplest and easy way. But it is your choose
If you still have question ask me but before read the post of the threads I post you because they should answer your questions.
BTW: try to search for your problem, if you dont like the searchform in the forum use google: "<your problem in short words> site:xda-developers.com"
Thanks man
Sent from my X8 using Tapatalk
hey,when i try to intall hard spl,it says that my mobile phone isnt connected...but it is...how to solve it?
do you have installed active sync (xp) or mobile device center(win7) this program build the connection.
neoofoox said:
do you have installed active sync (xp) or mobile device center(win7) this program build the connection.
Click to expand...
Click to collapse
I guess he's still in android..
Can you enter the triple colored screen?(Put the phone off, remove battery for a sec, place back, press volume down, and then press the power button. KEEP IT PRESSED! then wait until you see the 3 colored screen)
If you can, keep it in that 3 colored screen, and then start the hard spl installer on the computer.
Yes i can, thank you!
Sent from my X8 using Tapatalk
Ok,i did and nothing.how can i fix it?
looks like your your phone isn't recognized by activesync (xp) or device center (vista & win7) on pc.
that's what "your phone needs to be synced!" in the instructions means. you don't have to set up a sync-partnership (contacts etc), it's enough if you can browse the phone from explorer.
if you can't get that to work, use sd-method:
download xperia078_2.zip from hardspl-thread, extract the ruu_signed.nbh, rename it to kovsimg.nbh and copy it to root of your sd-card. now enter bootloader and follow the instructions.
make sure that the file is named "kovsimg.nbh" only, not "kovsimg.nbh.nbh"!!!

Categories

Resources