Problem with Moto HS850 - MDA III, XDA III, PDA2k, 9090 Software Upgrading

Just upgraded SX66 to newest version (Radio: 1.15.00
BT: 1.0.0.3900) and got a HS850 handfree.
Got two problems:
1) outgoing voice is so weak that the other end cannot hear me at all through HS850
2) how to use HS850 for listening mp3 etc?
It seems I have added 'A2DP audio profile for bluetooth'
but in the profile 'use hands-free for:
here only shows 'Telephone calls '
is it right? I assume it should have more options for me to choose
Plz help! Thank you!

Edit -- Oops, I just noticed: the Motorola HS850 isn't a stereo headset, is it? Are you sure it supports A2DP? If you are, read on...
----------------------------------------------
About question 2):
You should create two different connections with your headset: one for handsfree phone operation, one for high quality audio. I assume you already have the phone connection.
Once you've installed A2DP (cf. your question in this thread), you can create a second connection, this time using the High quality audio option.
This is how I did it, hope it's the correct method. Good luck!

not sure if HS850 supporting a2dp.
when I try to add another connection by 'high quality audio', sx66 cannot find hs850 and connect it.
sigh
Robrecht said:
Edit -- Oops, I just noticed: the Motorola HS850 isn't a stereo headset, is it? Are you sure it supports A2DP? If you are, read on...
----------------------------------------------
About question 2):
You should create two different connections with your headset: one for handsfree phone operation, one for high quality audio. I assume you already have the phone connection.
Once you've installed A2DP (cf. your question in this thread), you can create a second connection, this time using the High quality audio option.
This is how I did it, hope it's the correct method. Good luck!
Click to expand...
Click to collapse

That sucks...
Well, stereo headsets are getting cheaper and cheaper... :wink:

Related

BT 4 MP3, one BT headset for 2 phones?

is there a way to listening mp3 from bluetooth headset?
which bt stack is the best?
i was using jabra bt258 and able to connect my old xda2 and xphone into the jabra.. so i could use one bt headset for both phone and connected all the time.
tried with xda2s and xphone2 and nothing like it works.. does anyone try it?
I don't think BT headsets were meant for MP3 playback. It won't work. FYI: i'm using a HP Bluetooth headphones with my IIs.. works fine. Occasional static/cutting depending on where my IIs is, but works for me.
Do a search and you'll find more information on this topic. I'm too lazy to search, otherwise i'd do it for you. :
BT headsets work fine to hear mp3 in PocketPC (non phone edition)
but it doesn´t work in Blue angel (or I can´t manage it)
I don´t know if it works in another phone edition
sorry
has anyone try with 2 handset and using one bluetooth only?
bluetooth headset for MP3s
just bought the XDA IIs, and upgraded the rom via the O2 website. I previously had the 6315, which sucked BUT it had the A2DP audio profile for bluetooth. A previous user described the fact that they own an HP headset and were able to listen to MP3s on the IIs. Previously i was able to do so on the 6315 w/ the jabra BT250. I want this ability on the IIs, how did you do it? Please be specific, and talk as if you're talking to a complete novice (YOU ARE, LOL). Thanking you in advance!
Re: bluetooth headset for MP3s
Any one got a follow-up for the problem?
Richie_XDAIIs_NYC said:
just bought the XDA IIs, and upgraded the rom via the O2 website. I previously had the 6315, which sucked BUT it had the A2DP audio profile for bluetooth. A previous user described the fact that they own an HP headset and were able to listen to MP3s on the IIs. Previously i was able to do so on the 6315 w/ the jabra BT250. I want this ability on the IIs, how did you do it? Please be specific, and talk as if you're talking to a complete novice (YOU ARE, LOL). Thanking you in advance!
Click to expand...
Click to collapse
do a search of XDA forums - i'm pretty sure it's been discussed.
my only concern is how efficient is this all going to be... don't know about headset, but the phone battery WILL crap out after a couple hours of BT usage... unless u have it cradled in a car or something...
I did some research last night but didn't find out the solution
I have a moto hs850 handfree.
how to use it for listening mp3?
It seems I have added 'A2DP audio profile for bluetooth'
but in the profile 'use hands-free for:
here only shows Telephone calls
is it right? I assume it should be have more option for me to choose
starik said:
do a search of XDA forums - i'm pretty sure it's been discussed.
my only concern is how efficient is this all going to be... don't know about headset, but the phone battery WILL crap out after a couple hours of BT usage... unless u have it cradled in a car or something...
Click to expand...
Click to collapse

XDA2i - bluetooth stuff - newbie question

Greetings folks ....as regards fiddling around with ROMs etc... I'm a total newbie at this ... but am willing to give it a shot ..... however am also in the lucky position of having an XDA2 and (recently upgraded to) XDA2i ....
Got a bluetooth fit in the car (AUDI UHV9649) which does nothing with the XDA2 (old MS BT stack so no handsfree :-( ) but does work with the XDA2i (Widcomm 1.0.0 build3900) ... for 3 minutes at a time .... but it then disconnects and reconnects EVERY 3 minutes ..... and doesnt do the SIM Access Profile ..... any ideas ?
So, this niggling problem has prompted me to see if there are newer and better BT setups out there that I can apply to the XDA2 and XDA2i ...
Hence my lurking on the forum ... and now 'coming out' !
From what I have gleaned from 3 days perusing the forums ......
There is a ROM upgrade to the XDA2i, but what improvements (if any) does this ROM1.11.162 Radio1.03 give over the ROM1.10.00 Radio1.0.0 - and is there better bluetooth functionality/stability ? What BT version is on this ?
------
Also see that there is a patched WM2005 fit for the XDA2 on buzznet (Buzz Lightyear you have my respect sir 8) ) .......
How stable is this ? And can anyone say what BT version is on that ?
Appreciate any answers and look forward to starting to get my hands dirty ....
XDAIIi (Alpine) - Bluetooth Stack upgrade - how to?
Hi Captain
I see your post is getting old, but it's my first day lurking the forum and so far I haven't been able to work out how to upgrade my Bluetooth stack... Have you had any luck?
I need to upgrade mine for different reason - I've just bought AnyCom BSH-100 Bluetooth Stereo Headset fooling my self that I will be able to use the headset for listening to mp3 music etc. as well as handsfree, but as it turns out the XDAIIi does not fully support the Advance Audio Distribution Profile (A2DP) required to listen to high quality audio...
Even more confusing the spec on the O2 web site states that the XDAIIi supports A2DP.
Please anyone! How to upgrade the bluetooth stack? I would do it even to a hacked version that works with that headset....
Please share your experience...
Thanks!
On my device I have Bluetooth version 1.0.0 Build 3900 from Broadcom!
Extra bluetooth profiles for XDA2i (Alpine)
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Hi,
BIG THANX for the spot on info! This is exactly what I'm looking for I hope it should work for me too...
Can you confirm you've just installed this CAB on top of your existing Bluetooth software that comes with the XDAIIi (mine is Broadcom version 1.0.0 Build 3900)?
I was planning to buy the Motorola HT820, but I impulsively bought AnyCom BSH-100 because it's foldable... At least I can swap it now for Motorola if I can't get mine to work with this update!
A2DP on O2's website
Click to expand...
Click to collapse
Yes I initially read about it here on these forums, but I didn't bookmark the thread. It was on the O2's web site I checked. Now I tried searching but couldn't find the thread... As far as I remember it was on www.my-xda.com
It is not on the web site anymore it appears they have taken it off, because people already had our problem and quoted the A2DP support...
Anyway, what's more interesting is that I spoke to O2 Data Support today again. The guy seemed quite apologetic and could not give me any resolution or promise future updates. What's more important he pointed me to these forums (XDA-Developers) for not supported solution to my problem. He confirmed that I can have A2DP support but refused to email me info because it is not officially supported by O2!
I'll post again with the result of this update I hope it makes my XDAIIi compatible with the AnyCom BSH-100 Bluetooth Stereo Headset I bought, by adding the Advanced Audio Distribution Profile.
Re: Extra bluetooth profiles for XDA2i (Alpine)
Dezigner said:
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Click to expand...
Click to collapse
BINGO! It works like a dream!
I can't believe it... As you said all I had to do is run this BT update (CAB file) and there it is - The A2DP was available in the Bluetooth Connection Wizard in Bluetooth Manager! I didn't even have to pair the headset again (after the install - I did soft reset just to stay on the safe side prior running BT Manager). I just run the wizard again with High Quality Audio selected it listed my headset (AnyCom BSH-100 Bluetooth Stereo Headset) now I have 2 shortcuts on My Shortcuts tab one is Hands-free and the other High Quality Audio!
The install hasn't changed the BT stack version on my device - it appears the only visible effect is the extra profile to support A2DP.
Now I can listen to mp3 and watch movies, be on skype and of cause use it as hands-free too - ALL this on my XDAIIi
So far I'm very happy with the headset - it does everything it says on the box!
Exactly that just ran the cab file on the phone over the top of the standard O2 rom (bluetooth stack 3900).
The only part that doesn't work from the HT820 is the remote control functions for media player (meant to be able to do next/previous track play/pause) but sound quality is perfect (seems to drop a fraction on a second silence in every so often but there doesn't seem to be any pattern to it so don't know if its the headphones the xda or just bluetooth.
dear members
I downloaded the cab file in my M500 but that dont work.Infact my homescreen is not readeble any more (hard reset?).
Is there no other way to make it possible to use my bt headset with my m500?
thanx for replyíng.and sorry if this question is frequently asked?
Sjon
Yes hard reset will restore your original install you may also try a backup if you have one.
Please note this update will work if the Bluetooth stack on your device is from Broadcom. I think the M500 may have the Microsoft one...
see also this thread:
http://forum.xda-developers.com/viewtopic.php?t=30192&highlight=a2dp+bt
From experience this update works for the Broadcom BT stack.
I hope this helps...
Thank you.
I've read the post...I see now that there is no solution for my problem
Once again i was to fast for installing before reading.
best regards sjon
Dezigner said:
Exactly that just ran the cab file on the phone over the top of the standard O2 rom (bluetooth stack 3900).
The only part that doesn't work from the HT820 is the remote control functions for media player (meant to be able to do next/previous track play/pause) but sound quality is perfect (seems to drop a fraction on a second silence in every so often but there doesn't seem to be any pattern to it so don't know if its the headphones the xda or just bluetooth.
Click to expand...
Click to collapse
I can confirm everything you say applies to my AnyCom BSH-100 headset too - remote functions do not work, I also experience the same brief drop of sound! I tried with ecrypted and non encrypted connection to the headset to make sure it's not the excyption that is causing the problem. Also tried different players - no luck. Must be the bluetooth implementation
Please let us know if you manage to resolve this problem!
Thanks
Emil
Sjon said:
dear members
I downloaded the cab file in my M500 but that dont work.Infact my homescreen is not readeble any more (hard reset?).
Is there no other way to make it possible to use my bt headset with my m500?
thanx for replyíng.and sorry if this question is frequently asked?
Sjon
Click to expand...
Click to collapse
Yesterday I applied the same Bluetooth update to add A2DP support to MDAIII as sold from T-mobile UK!
I did experience the same problem with Todays screen! This is not a problem at all - Todays screen gets messed up because it appears that the install interferes with the current Theme!
All you have to do to fix it is reapply your existing Theme from Start --> Settings --> Today --> Select a theme for your device --> OK
Apart from this this update does add the following two Bluetooth profiles:
High Quality Audio
Bluetooth Keyboard
You can try again - No need for hard reset to restore your Todays Screen
Re: Extra bluetooth profiles for XDA2i (Alpine)
EM1L said:
Dezigner said:
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Click to expand...
Click to collapse
BINGO! It works like a dream!
I can't believe it... As you said all I had to do is run this BT update (CAB file) and there it is - The A2DP was available in the Bluetooth Connection Wizard in Bluetooth Manager! I didn't even have to pair the headset again (after the install - I did soft reset just to stay on the safe side prior running BT Manager). I just run the wizard again with High Quality Audio selected it listed my headset (AnyCom BSH-100 Bluetooth Stereo Headset) now I have 2 shortcuts on My Shortcuts tab one is Hands-free and the other High Quality Audio!
The install hasn't changed the BT stack version on my device - it appears the only visible effect is the extra profile to support A2DP.
Now I can listen to mp3 and watch movies, be on skype and of cause use it as hands-free too - ALL this on my XDAIIi
So far I'm very happy with the headset - it does everything it says on the box!
Click to expand...
Click to collapse
Unfortunately the link does not work anymore. could you please post it again??
This would help me a lot.
THX
Bibifrine
Re: Extra bluetooth profiles for XDA2i (Alpine)
Bibifrine said:
EM1L said:
Dezigner said:
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Click to expand...
Click to collapse
BINGO! It works like a dream!
I can't believe it... As you said all I had to do is run this BT update (CAB file) and there it is - The A2DP was available in the Bluetooth Connection Wizard in Bluetooth Manager! I didn't even have to pair the headset again (after the install - I did soft reset just to stay on the safe side prior running BT Manager). I just run the wizard again with High Quality Audio selected it listed my headset (AnyCom BSH-100 Bluetooth Stereo Headset) now I have 2 shortcuts on My Shortcuts tab one is Hands-free and the other High Quality Audio!
The install hasn't changed the BT stack version on my device - it appears the only visible effect is the extra profile to support A2DP.
Now I can listen to mp3 and watch movies, be on skype and of cause use it as hands-free too - ALL this on my XDAIIi
So far I'm very happy with the headset - it does everything it says on the box!
Click to expand...
Click to collapse
Unfortunately the link does not work anymore. could you please post it again??
This would help me a lot.
THX
Bibifrine
Click to expand...
Click to collapse
Please note this is FTP (not HTTP :wink: ) link! You can use any FTP client to connect to the ftp host/server: ftp.xda-developers.com with user name and password xda then you browse to the directory (you can see the path in the link above) where the cab file is and download it!
Possible reason why the link may not work for you is because you are behind firewall where the FTP protocol is blocked! Also make sure you are ising Internet Explorer when clicking on the link. Interenet Explorer can work as ftp client when the link is in the above format and FTP protocol is not blocked by a firewall...
I hope that helps!
:lol:
Re: Extra bluetooth profiles for XDA2i (Alpine)
EM1L said:
Dezigner said:
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Click to expand...
Click to collapse
BINGO! It works like a dream!
I can't believe it... As you said all I had to do is run this BT update (CAB file) and there it is - The A2DP was available in the Bluetooth Connection Wizard in Bluetooth Manager! I didn't even have to pair the headset again (after the install - I did soft reset just to stay on the safe side prior running BT Manager). I just run the wizard again with High Quality Audio selected it listed my headset (AnyCom BSH-100 Bluetooth Stereo Headset) now I have 2 shortcuts on My Shortcuts tab one is Hands-free and the other High Quality Audio!
The install hasn't changed the BT stack version on my device - it appears the only visible effect is the extra profile to support A2DP.
Now I can listen to mp3 and watch movies, be on skype and of cause use it as hands-free too - ALL this on my XDAIIi
So far I'm very happy with the headset - it does everything it says on the box!
Click to expand...
Click to collapse
Great so will this work on my xda2
dont know how this could happen, Im not usually playing with bluetooth but today when I ON the bluetooth. I will get this message
"Sorry! Bluetooth can no longer be used because the licence is expired"
"BDA ff:ff:ff:ff:ff:ff: Key:E3E534E19B3E8214C543A73C0A8B9A9074DD3B1753515CD8"
after that, bluetooth will off automatically.
and idea's ????
thanks
motorola 820 / remote
Did anyone find a solution for the remote problem with the motorola 820?
I am having problem to pair my XDA IIi with my BMW bluetooth and Accura MDX bluetooth. The XDA just simpy rejects to pair with BMW bluetooth. The XDA found the Accura MDX bluetooth, but when I try to make a call, XDA gives me error message "invalid command".
Will the upgrad fix my problem?
Thanks!
Re: Extra bluetooth profiles for XDA2i (Alpine)
EM1L said:
Dezigner said:
Hi,
I downloaded the following:
ftp://xda:[email protected] 3500/Broadcom Corporation BT-PPC AV.cab
And installed it on my XDA2i and all was well (I copied the cab file to my XDA and ran it from there)
Adds a few extra profiles to your bluetooth manager including "High quality audio"
Hope that helps! (Works for my Motorola HT820 headphones)
Out of interest where abouts does it mention A2DP on O2's website?, I'd love to be able to quote it back to them in an argument I'm currently having with them
Click to expand...
Click to collapse
BINGO! It works like a dream!
I can't believe it... As you said all I had to do is run this BT update (CAB file) and there it is - The A2DP was available in the Bluetooth Connection Wizard in Bluetooth Manager! I didn't even have to pair the headset again (after the install - I did soft reset just to stay on the safe side prior running BT Manager). I just run the wizard again with High Quality Audio selected it listed my headset (AnyCom BSH-100 Bluetooth Stereo Headset) now I have 2 shortcuts on My Shortcuts tab one is Hands-free and the other High Quality Audio!
The install hasn't changed the BT stack version on my device - it appears the only visible effect is the extra profile to support A2DP.
Now I can listen to mp3 and watch movies, be on skype and of cause use it as hands-free too - ALL this on my XDAIIi
So far I'm very happy with the headset - it does everything it says on the box!
Click to expand...
Click to collapse
Hi,
this helped me a lot, but still having some problems, i have troubles with answering calles when playing some mp3 .. also noticed that if I use windows media player it takes about 5 sekoneds to noticed incoming phone (but the phone that is making call is already noticing call, while XDAIII still playing songs)
had you any such a troubles?
thanks
Please, help. Can not end a call using HT820's buttons. This is important. Handsfree switches off, but connection with abonent still on... What's the scary thing.
Re: XDAIIi (Alpine) - Bluetooth Stack upgrade - how to?
EM1L said:
On my device I have Bluetooth version 1.0.0 Build 3900 from Broadcom!
Click to expand...
Click to collapse
Hi, How can I know my BT version on my xda II qtek 2020?
thanks
I have:
ROM version : 2.20.07CHS
ROM date: 09/17/04
Radio Version: 1.18.00
Protocol version: 1337.38
ExtRom version: it´s empty

$100 if you fix it: Loss of speaker audio after BT connections

Hi all, I have had this bug in varying flavours with both the Wizard and now the Kaiser.
If I make a call via Bluetooth (certain devices only e.g. JVC in car stereo), after the call, all audio is lost on the device when using the speaker, e.g. no ringtones, no TomTom voice guidance. (Oddly the touchtone sounds on the phone dialler continue to work.)
Making another call via Bluetooth works fine and all audio is heard, but not if calling via the earpiece of the phone - all phone audio is still muted. A reboot is required. (Even after a reboot, sometimes all audio is muted, and 2 or 3 reboots are required.)
It is like Bluetooth is 'stealing' the audio from the phone's speaker (which is should), but not giving it back at the end, however turning off Bluetooth doesn't return it.
It happens with WM6.x on the TyTN II.
If you can fix it either via a workaround (reboot the audio service after every call?) or a direct fix (HTC are useless and have not emailed me back), I will pledge you $100 via PayPal. I am sure others will join me in pledging an amount also.
Yes. I've seen the same thing with the last stock Tilt ROM, too.
Same here. But is not happening very often.
The other issue for me is if I have A2DP enable and listening to music, then making a phone call will drop the A2DP connection and I have to reconnect A2DP again. It happens to both my JVC car unit and Sony HBH DS220.
I tried that w/ Dutty's WM6.0 and the latest 6.1 rom
I have the same issue, with bluetooth disconnects.
Just staying on-topic here (you can solve A2DP issues with A2DPToggle a great free app), has anyone found a solution to this Bluetooth loss of speaker audio issue, or a workaround to avoid it happening?
Rebooting the phone after every Bluetooth phone call is hardly what I consider a high-end smartphone to require.
Same here
What Radio's are you guys running? (Ignore my signature for the moment, been phoneless and away from here for a while and just getting back up to date )
Haz
My current radio is 1.64.08.21.
I have also tried 1.64.06.04.
Could we be closer to finding the problem? Does the Radio contain the Bluetooth stack?
Here are all available Radios:
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
I'm going to try 1.58.26.20 now. I suggest others try the other 1.5x variants and report back if any of them solve the bug.
Update: I am now offering $100 to anyone who can fix this - see 1st thread.
I have used Windows Mobile since the first ever SPV phone. This one issue is making me look seriously at abandoning that loyalty and getting a Blackberry. If I can fix this for $100 I could be tempted to stay however.
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
What bluetooth headset do you have? Have you tried other headsets or just the one you have? What version of 6.1 are you using?
Thanks, I'll give the audio toggle a go. Might need some help with Mortscript though
I am using the JVC KD-BT1 car stereo with Bluetooth in-car kit. However I can also lose audio on a clean boot even when not in the car, although that is very rare. When using it with the car stereo, it happens after almost every call.
I am running Sleuth's WM6.1 but the other people in this thread are using a variety of BT devices, ROMs, and HTC models.
Can anyone help with how to create a MortScript to run BTAudioOff.exe after each phone call?
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Kraize92 said:
Flash a NIKI radio. I had a similar issue with my JVC in-dash CD player and I just got all the radios and tried them all. All the NIKI radios seem to work a lot of the time, while some work and others don't.
Click to expand...
Click to collapse
Thanks, I'll try that too.
Rumball said:
Have you tried BT Audio Toggle ? (found at http://pdaphonehome.com/forums/sams...luetooth-headset.html?perpage=20&pagenumber=1)
Maybe if this helps with your problem then a mortscript could be written to automatically run the utility after a phone call.
Click to expand...
Click to collapse
Okay I tried this and before I even got in the car, chose to turn Bluetooth Audio off using the toggle. Since then I cannot recreate the issue! I am not having to toggle after every call, I only did it once and the problem won't come back!
Fingers crossed...
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Kraize92 said:
NP. 1 more thing. What do you mean all audio is lost? Do you mean that the auido goes through the bt device? Or just that there is no audio coming from either at all. If that's the case, then all you might have to do is go to Comm Manager>Settings>Bluetooth>JVC (or whatever you named it) and uncheck the Stereo sound and viola it should work unless you are not using A2DP >.> . I think it's either directing all sound to your bt device or trying to send sound to it but failing.
Click to expand...
Click to collapse
The issue is there is no audio coming from either the phone or the Bluetooth device. I hear the Bluetooth device disconnect, and its display shows that it has also.
I see no 'Stereo' option to untick for the JVC in its Bluetooth settings, only Hands-free and Wireless Stereo (already unticked).
No progress
Okay, this is seriously getting me down now It all sounded so promising. I have tried the following:
Flashed Niki Radio 1.58.21.23
Tried using Bluetooth Toggle - it seemed to work once when I turned BT off before connecting, but after a reboot the problem is back
Tried a HFP extension PM'd to me (thanks anyway - didn't help)
Made sure Bluetooth Stereo is unticked in the JVC's settings on the phone
I am not sure if the problem is worse when taking a call as TomTom is running.
Here is an interesting development which might help someone narrow down the cause:
I make a few calls, and as always audio is lost, even for phone calls sometimes.
Touchtones on the keypad are the only sound that the phone continues to emit itself. Everything else (TomTom, ringtones, etc.) is dead.
I then go into the JVC's A2DP mode and 'Connect'. The icon appears on the mobile's title bar, and I can hear phone audio through the car stereo.
I 'Disconnect' and the phone's audio is still lost.
What this tells us is that the phone is putting out sound, just not through the speaker.
If someone can write something that will reset the speaker driver after a call, my offer for $100 still stands.
Just to update this, the issue still exists with a clean install of HTC's new 2-May-08 WM6.1 ROM from their website. To***rs!
CJSnet,
Since we got the similar setup w/ exact the same issue (Att Tilt w/ JVC BT-1), I think the problem is basically Kaiser does not switch back to A2DP profile properly after headset profile from phone call. The same issue happens to my Sony HBH DS-220 stereo headset too.
I tried my Eten M600 w/ JVC BT-1 and does not see this problem

how to "speed up" a2dp / bluetooth. HELP!!!!!

I need some serious help please.
Situation: My car has bluetooth for phone but not music. So i bought an A2DP FM transmitter. I am trying to use both in the car. one for phone, other for music. problem is, when both bluetooth devices are connected, the music SKIPS horribly.
I've tried a bunch of different roms and radios and tried the a2dpfix and everything I could find.
Basically, when i disable the car bluetooth, the skipping stops.... so it's the radioload or the workload on the tilt that makes the music skip.
So......
1) what can i do to increase bluetooth performance or general system performance?
2) what is the best rom or radio for bluetooth performance?
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
4) what is the music player using the least amount of resources?
THANK YOU. Please help with knowledge, not speculation.
also, any thoughts on prioritizing bluetooth devices or signals to give higher priority to a2dp?
overclocking?
j_bowl said:
radioload
Click to expand...
Click to collapse
Most likely. Several people have reported that issue. A2DP needs lots of bandwidth and realtime availability, if a second connection needs to be maintained at the same time it's very likely to cause interruptions.
j_bowl said:
I need some serious help please.
...snip...So......
1) what can i do to increase bluetooth performance or general system performance?
2) what is the best rom or radio for bluetooth performance?
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
4) what is the music player using the least amount of resources?
THANK YOU. Please help with knowledge, not speculation.
Click to expand...
Click to collapse
What I did to fix this problem was to purchase the new Motorola FM transmitter - it does BOTH on one device - it transmits music to the radioo and gives you hands free for phone - really works well - much better than the Parrott that was in the car to begin with.
Bill
I saw the Motorola FM Transmitter but decided to go with my Satechi model because 1) it starts up automatically with ignition and 2) I can hide it away in the glovebox instead of having it attached to my visor.
so the best set up was to use both at the sametime but i'm not sure if i can anymore.
anyone know how to dedicate more resources to radioload or set priority in task manager?
THANKS
No.
A possibility, which depends on your Satecho thing, is if possible not to connect it to the Kaiser (leave it on, paired, but don't expressly connect to it when getting in the car).
That way there's no active BT connection between teh 2 so you shouldn't get skips. When you receive/place a phone call, the Kaiser will search for a present known handsfree and connect to it automatically anyway.
how do i pair it and not connect? when i get in the car, the car handsfree connects automatically.
j_bowl said:
I need some serious help please.
3) what is the best setting for bluetooth performance in registry? bitpool? framerate? jointstereo?
THANK YOU. Please help with knowledge, not speculation.
Click to expand...
Click to collapse
Did you happen to do any registry tweaks to maximize the performance of the A2DP BT Stereo performance in the past by increasing the Bitpool and MaxSupportedBitPool DWORD. I found on my Vogue that I lost simultaneous BT connection when I altered those settings from default. I now leave the registry A2DP settings at default and have not had problems with simultaneous BT connections (hands free, BT stereo and BT GPS puck).

Radio via Bluetooth. HELP

I am the happy owner of a HTC Topaz.
I ride a motorbike, and have recently bought a bluetooth crash helmet with built in speakers / mic which works a treat for answering and making calls and also for listening to TomTom navigation instructions from my HTC Topaz.
However, I have yet found a solution to allow me to listen to the built in radio via bluetooth. Because HTC requires the plug-in headset to act as an antena the radio doesnt work without it.
However when I plug in the headset, i get instant radio reception but then the sound is routed to the plug-in headset , rather thean the bluetooth speakers.
My logic tells me that there must be some way to use the plug in headset as ONLY an antena allowing the sound to be routed by deafault to the bluetooth headset. Surely this is software driven?
I am not a software Guru, but keen to learn and frustreted that there doesnt seem to be a yet obvious solution to this problem.
Any help would be appreciated.
T
Why 4 threads?
You have to use plug-in headset as antenna.
Then try this:
http://freewareppc.com/communication/acbtogglebt.shtml
koen-ronse said:
Why 4 threads?
Click to expand...
Click to collapse
Sorry if i've messed up with protocol. I thought that i'd have more chance of a solution hitting various forums areas..
Unfortunately you might find it's not possible because the audio routing to the bluetooth encoder inside the phone is probably before the point at which the FM audio is injected. Just speculation,but I believe it may be the case.
If the first one doesn't work, check this:
http://forum.xda-developers.com/showthread.php?t=541238
Great
fighter7139 said:
If the first one doesn't work, check this:
http://forum.xda-developers.com/showthread.php?t=541238
Click to expand...
Click to collapse
It worked!!
Finally.
Many Many thanks!!

Categories

Resources