Database Develop

Wiki: WM5 Buggy Thrid Party Software

I have started this thread so that we can document some intresting behavior of third party software under our WM5 Build. As well as WM5 Behavior.
We need to be fair as we all know that the WM5 version that we have has not been released and some software might work on WM5 but has not been built for it.
I have called it Buggy and maybe that is not a good choice of words, however maybe it is.
So if you wrote the software it was not my or any other person who posts here intention to clam that its is your software or even WM5 that is buggy.
Fact is somehow something is wrong.
I hope that owners of Offical versions of WM5 Can verify if they have found the same issues.

Resco Explorer 2005 V 5.21
Resco Explorer 2005 V 5.21
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Buggy_software

I use 5.13 and it works fine...

NiceStart. It doesn't work at all when the PPC's turned on - I only get the WM5 password screen. Then again I don't need it anymore since the SMS messages don't turn on the unit, they just send the sound, a big improvement!

1-Pass Version 1.1.1
1-Pass is a nice application that allows you to lock your device and be able to enter it either by using preset hardware key combinations or a numaric password.
I have used this back with rom 1.06 and like it.
It seems that it conflicts with the built in appliacton password found under
Start -> settings -> Password
They both seem to use the same space as when you configure I-Pass for a password you also set the Password application.
Thus after a reboot or sleep mode you are confronted with the Password application screen and can not use the I-pass screen. Hardware keys that you set can not be used. (thus you need to finger around and enter the numeric password.
Documeted screen shots
http://wiki.xda-developers.com/index.php?pagename=BA_WM5_Buggy_software

Hey Guys!
There's just one "bug" that really anoys me:
On startup (after device was in standby for a longer time) WM 5.0 needs some time to react. I think, this is no problem of software but of storage. This thought seems to be right, because the more storage the today Pluginns need, the longer it takes until it reacts. I have uninstalled PocketPlus, because it takes up to 4 (!) seconds on restart. Can you copy that?

Nope, I don't have that problem. I have PocketPlus without any meters, only a few icons and the taskbar battery monitor. I remember I read somewhere here that if you use any of the meters, especially storage meters, it will take time.

Bejewelled 2 doesn't install saying that my version of Windows Mobile is too old... :shock:
Also the O2 Application Software supplied with the XDAs doesn't install either, so no ZIP or fax software
Resco Explorer 5.15 works fine though... so I won't upgrade :roll:

I can not change the theme of my desktop on WM5, even if i select the theme from SpbPocketPlus, it doesn't change.

New WM5 rom on FTP (Ivan Ver 4 R2.1)

Ivan has uploaded his latest (3.3R4) modded version of Mamaich's Wizard2BA ROM here.
ftp://xda:[email protected]/BlueAngel/BA_WM5/Shipped_Extracted_Updates/WM5_pack_V1.rar
No mention in the text files of what's changed since 3.3R3, and I've not had time to try it myself yet.
One thing I can say is that the previous 3.3R3 build was a lot quicker than TuMa1.3, albeit with fewer built-in applications. Hopefully R4 builds on that speed advantage.
I'll post whatever I can discover about this build tonight after I've tried it out.
At very worst it's something to play with while we all wait for TuMa 1.4.
EDIT: Link corrected (MDAIIIUser)
EDIT: New version 4 Revision 2.1
ftp://xda:[email protected]_Extracted_Updates/wm5_ivan/WM2k5_v4_R2.1.rar
older
ftp://xda:[email protected]/Uploads/BLueAngel/wm5_ivan/WM2k5_v4_R1_pub_unofficial.rar
ftp://xda:[email protected]/Uploads/BLueAngel/wm5_ivan/WM2k5_v4_R0_pub.rar
ftp://xda:[email protected]_Extracted_Updates/WM2k5_v3.3_r5.2_public.rar

significantly faster than TuMA 1.3, very responsive. rings at the first ring, able to play MIDI files as ringtones, no lag time on the keyboard. very very good.

First time ive heard of this rom. Would appreciate if anyone who has tried it can post feedback.

Just installed it and configed it to my normal settings.
It's a raw install of WM5, no optional apps at all, and it's a lot quicker than TuMa. In particular the messaging and phone apps seem a lot more responsive.
One other note - a lot of filesystem cache options are not set or left at defaults in this build, so it might be possible to speed things up even more with a few regtweaks.

According to readme this ROM is based ont he original WM5 BA ROM with some fixes. I have not tried it yet.

Can anyone post any comparison benchmarking results (such as by SpB Benchmark) of this ROM against the TuMa 1.3 ROM?

Thanks... m8.....
ill try....
:twisted:

hey
If anyone here already tried this WM 5.0 for BA, pls post your feedbacks here...

this rom is quite fast on 400mhz is as fast as tuma 1.3 on 530
there is no skiping in windows media while playing mp3s
language packs fully working
no problems with disable/enable wifi
standard rings beetween first and second ring
cool rom

Some app can not install on this version

I have tryed absolutely every WM5 rom for blueangel, and this one is the fastest thah i have seen. I don't need to overclock my cpu to run it smooth. All the options are more responsive PIE works quite well. Wifi works like a charm, I have not tryed bluetooth yet. This rom is clean and fast, I want all the future roms to be like this one. I do not need extra software but buggy OS, i want clean WM5 rom and if I need something i will install it later. Thanks Ivan for continiue mamaich's work, you both have done great job!

yeah
This is more fast than TuMa v1.3. I havent tried the pocket IE yet. Btw can I install the RAM Disk like the used in TuMa v1.3? If so, where can i download the right version for BA?

wooh
Tried already the pocket IE, for me it is faster than ever before.. Same with the messaging applications. Its really fast...that's all i can say...
No devicelock....????whay?
DOC reprtitioning tool works on this version of WM 5.0 for BA

It'sreally the fastest wm5 i've had tried. Bt headset issue is still here
wifi is ok ad really fast to take net :lol:
Some problem to switch with my dual sim card (also in tuma1.3 and older) i've to reset to have the second sim run.
Phone is really good .....

Now I've had a few hours to work with this build I can honestly say it's the best WM5 there is for BA. Not least because I can actually answer the phone without the thing locking up, or taking so long to open the phone app that I miss the call.
In the past I've used the original Wizard2BA and TuMa 1.3, and this thing beats both for speed and stability. It does have less features than TuMa, but if you want extra applications (MMS, regedit, keyboard skins....) then just download them and add the ones you want - not such a big deal.
The lack of a screen lock shouldn't be a big problem. Instead I've just set the button lock to "all buttons except power button" in control panel, then turn the device off to lock buttons and screen.
Shame the BT issue is still present but we can't have everything.

It´s a fast and clean ROM.
No double entries in programs and settings.
No problems with wifi so far - but I only tested this for about 10 minutes.
Responding of the device is faster than TuMa 1.3
ActiveSync stil signals connected after removing the device from the cradle but semms to make no further problems.
"Media" Sync is working fine.
I am only missing the device lock today plugin. Is it possible to install this manualy?
Thanx!
Great job!

mms?
Where can i download compatible ArcSoft MMS for this version? I tried the one from TuMa v1.3 but it doesnt work (or may I just missed somethings?) I did manage to make a new mms account though...

I've a problem to use extended rom. It's impossibile to unhide it so i'm not able to use it.
Any suggestion??
regards

?/
Just follow on the procedure.. First install Extended ROM unlocker, unhide and unlock your BA and soft reset and then install the extended_rom visible and then soft reset again.. You will see now ur extended rom

Hi,
I've got a problem installing this rom. It installs ok, but on startup it starts installing files from extended rom:
1. BA_version_140.cab
2. Album_BlueangelAKU26_Generic_WWE_RC20.cab
I dont know if i should install these, or if they are remains from TUMA 1.3 (or romz before that).
The problem is the soft keys YES/NO dont even work, so i cant install and i have to wait for it to cancel automatically.
Anyone got a solution/answer?

Helmi BA WM2k5 AKU2.6 Beta (v.1.1.2 Beta)

Helmi BA WM2k5 AKU2.6 Beta (v.1.1.2 Beta)
As requested..
This release Included.
- Older OS Built but more compability (MS Voice Commander for example)
- Modem link (as BT DUN Modem Incoming port COM6)
- Mamaich Paging Pool 16mb
- Wifi & Bluetooth Coexistentcy.
- Ability to save everywhere with Pocket Excel
- Smart Dial v2.2 is added to ROM. (if u dont use it just disable it)
- Flight Mode, Task Manager, WM5 New Menu, WM5 Storage, & USB Mode Switch added to extras folder.
- StartUp Manager by Baniazek
- Use ace_ddi as video driver (Landscape & Portrait fully supported but gif file wont show in PIE, use D3D_Driver driver to support gif with PIE but Landscape mode will need to re-align after soft reset)
- .NET Fix included
- Transcriber included.
Limitation/Still Not fixed.
- CommManager Didn't fully Manage wifi still need to turn on wifi with Wlan manager (wifi tray icon) first.
- WModem Didnt work.
Most off the setting are still the same as my AKU3.2, including MMS/GPRS operator list.
this build is a complete new remake of AKU2.6 on BA, so maybe some problem may happens. as always...we test it together guys.
Download here:
ftp://xda:[email protected]/Uploads/Blue Angel/Helmi_WM2k5_AKU2.6_32mb_v1.1.2.rar
http://micmeo.com/BlueAngel/AKU_2.6/Helmi_WM2k5_AKU2.6_32mb_v1.1.2.rar
thanks Micmeo for the space and the help... thanks man. :wink:
please remember this is an Older version of AKU, so PIM backup might not work, if u downgrade from AKU3.xx rom...
best regard
helmi

AKU26
Helmi very thanks for that release, iam going to flash imediatly. Sorry for the pm about the direct link, i was just to quick in answering. Posting my experience tomorrow.

MicMeo said:
I'm using SPB Backup as my default backup program. What's happen when I use a PIM backup of AKU 3.2 to restore in my downgraded AKU 2.6? Do I need to sync my PIM data with M$ Outlook b4 downgrade?
Click to expand...
Click to collapse
hmm... I can't be sure, but learn by old AKU2.3 experience, the pim data is modify in AKU3 so i think its better to sync first. then u can try if it work or not bro.

The AKU 3.2 has a 'Bluetooth hardware error' error, thus I'll propably downgrade to 2.6 :/

it's possible to flash this rom without hard reset?
I have Helmi Aku 1.3.2 beta but I have some problems with phone and WiFi.

Nope, its not possible :/

Man, I just upgraded 2 days ago from WM2003SE to AK3.2 v1.3.1.
Now, I see AK3.2 v1.3.2 & AK2.6
Wonder which one should I try. I do miss using Voice Command, but I know I have TT6 working on 1.3.1 nicely.
Hmm..... :roll:
2 question:
1) Anyone got a .cab for Canada Rogers&AT&T GPRS setting? Can this be included in the future for Operator list?
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?

mr_ding said:
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?
Click to expand...
Click to collapse
that would actually make it slower you'll be lowering the paging pool from 16MB to 8MB.

mr_ding said:
Man, I just upgraded 2 days ago from WM2003SE to AK3.2 v1.3.1.
Now, I see AK3.2 v1.3.2 & AK2.6
Wonder which one should I try. I do miss using Voice Command, but I know I have TT6 working on 1.3.1 nicely.
Hmm..... :roll:
2 question:
1) Anyone got a .cab for Canada Rogers&AT&T GPRS setting? Can this be included in the future for Operator list?
2) With AK2.6 or AK3.2 v1.3.2, do I still need to modify at address 0437072 of nk.nba from (00 00 20 00) to (00 00 80 00), or is that done already? I did that for 1.3.1, or would that actually made it slower?
Click to expand...
Click to collapse
there's no need to apply Paging Pool with both rom (1.3.2 & 1.1.2).

Wow, just upgraded to 1.32 AKU 3.2 with 16mb paging file size yesterday and now AKU 2.6 with 16mb paging file size is ready.
No time to try this out. Maybe next week.
Anyway, 1.32 AKU 3.2 is works very fast for me now, everything ok except for no M$ Voice Command.
Hope to hear from the rest of you on the results of this new upgraded rom.

Hi,
couldn't wait to test that release. My first try on WM5 was helmis AKU32 v13, which runned smoothly after applying the poolsize patch. But my most valuable thing, MS Voice Command, didnt run on that AKU since PIM Database format changed. Then tried AKU23 from Helmi wich worked acceptable with some problems and Voice Command worked well. As AKU26 with all fixes from AKU32 was here I gave it an instant try and yes that was it.
Haven't found any problems/bugs playing around yesterday night, that helmi dont know allready. Voice Command works fine, which is the most important thing for me. I have the feeling that ActiveSync is much more stable than in AKU23 or 32. Cradle in/out again and again and no errors on my desktop. I got the Microsoft GPS Multiplexer running, didnt work for me in AKU32 or AKU23 from helmi
Helmi I could kiss your ass for that release!
EDIT:
Minor Problems: Playing an MP3 from SD-Card and suspend/turn on again hangs the Shell, RNDIS doesnt detect when removed from cradle (IP Adress is still up), turn on and off resets that behaviour.

MCSchermer said:
Hi,
couldn't wait to test that release. My first try on WM5 was helmis AKU32 v13, which runned smoothly after applying the poolsize patch. But my most valuable thing, MS Voice Command, didnt run on that AKU since PIM Database format changed. Then tried AKU23 from Helmi wich worked acceptable with some problems and Voice Command worked well. As AKU26 with all fixes from AKU32 was here I gave it an instant try and yes that was it.
Haven't found any problems/bugs playing around yesterday night, that helmi dont know allready. Voice Command works fine, which is the most important thing for me. I have the feeling that ActiveSync is much more stable than in AKU23 or 32. Cradle in/out again and again and no errors on my desktop. I got the Microsoft GPS Multiplexer running, didnt work for me in AKU32 or AKU23 from helmi
Helmi I could kiss your ass for that release!
EDIT:
Minor Problems: Playing an MP3 from SD-Card and suspend/turn on again hangs the Shell, RNDIS doesnt detect when removed from cradle (IP Adress is still up), turn on and off resets that behaviour.
Click to expand...
Click to collapse
What about turning on bluetooth and wifi and flightmode? Does it work all the time?

ThExSenatoR said:
What about turning on bluetooth and wifi and flightmode? Does it work all the time?
Click to expand...
Click to collapse
Well, i tested it for you. Using the Systrayicons of Bluetooth and WLAN has worked turning booth on and off. Using Comm Manager it only works well if you turn BT and WLAN on and off via systray once after a soft reset. If you don't do that Comm Manager will make trouble. Flightmode works only to disable the phone, enableing it again didnt work for me (tested twice). But Flightmode.exe was able to turn on the phone again after some seconds.
Bluetooth does not disble when device suspends and WLAN disables when device suspends and reanables if you resume, that the normal behaviour of my last WM2003. Im going to check GPRS later the day.
TomTom5 boots up in around 8/9 seconds with "Deutschland-Map"
EDIT: GPRS short connect test works, no Connect link in the GPRS Ballontip, but when you open a URL it begins the connection. I had to change the Search GPRS an Connection to Search GPRS on Radiostartup to get it connect successful.
By that i realised that after i swaped my SIM Cards, the first Bootup show R: NONE G: NONE, and Radiomodul doesnt work. After one Softreset everythings fine again.

TomTom6 boots up in 10 sec (tested with North America maps)
But closing TT6 does not disable bluetooth connection (AK3.2 v1.3.1 does it)

What about sms backup from Helmi's 1.32 rom using Spb backup, can it be restored to this rom?
Have anyone of you tested it?
Thanks.

my system backup via spb backup yielded errors. i had to reinstall all my apps.
i opted to go back (or forward?) to 1.3.2. had problems with messaging, worldmate pro, hanging, speed (doesn't feel like it's with a 16mb paging pool).

Anyone have a solution or tip for that?
With Helmi AKU32 v13 installed my display did not turn on when I received a sms (device suspended), but played sound and showed notification (after manually turning on display)
This "feature" is missing in this AKU26 release, what have I to do to restore this behavior? I searched the forum but could't find answers to that. I guess it must be a notification option or something in power settings?
Thanks in advance.

With this greatest rom when I receive an sms my pda plays only the sound and the screen doesn't turn on.. until I press power button.

zard said:
What about sms backup from Helmi's 1.32 rom using Spb backup, can it be restored to this rom?
Have anyone of you tested it?
Thanks.
Click to expand...
Click to collapse
Just tested using spb backup 1.5 to backup my sms, emails and mms before putting in this rom and restoring them. Works without any error.
Cheers!

Closer said:
With this greatest rom when I receive an sms my pda plays only the sound and the screen doesn't turn on.. until I press power button.
Click to expand...
Click to collapse
I'm facing the same thing, i.e. with incoming sms, led flashes red, pda plays sound and screen doesn't turn on, until power button is pressed.
Maybe this behaviour is good because at times, I don't realise an sms had been received and the screen is turned on, and programs on the pda are started without me knowing.
Cheers!

Opera/Task manager bug?

Hi all,
I have tried this many times on WiFi- when I close Opera Browser by tapping and holding "x" icon my Diamond gets very slow, and I can't open Opera again, can't send/receive mails etc (very long time when applications react). Device runs after it like very little memory, but task manager shows f.e. 51% It happens even after softreset and running Opera. But... When I minimize Opera and then close it via Task Manager menu on Today Screen everything is ok and device is running normally. My ROM is 1.37.X.X. Can you check this and reply?
Thanks,
TomekJ

Hi TomekJ,
same here with MDA Compact IV (german T-Mobile) in Stock condition and with same ROM. I had no clues about the reason until your message. Now its clear. Seems like a bug (in Opera?).
jhkaufi

Problem partly solved
Hi,
I made some tests - in my case, when TF3D is on everything is ok, but when I disable it on today screen bug appear...

WINDOWS MOBILE 6.5 21193/21193 update 25.3.2009

XIP 31193
SYS 31193
hello im working on new version and now it is stable and working
here is link
all buttons working (red button .......)
http://www.sendspace.com/file/8ger2y
and here is video of rom
http://www.youtube.com/watch?v=ozY9aKAMy58
scroll down for screenshots

My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!

miloszz said:
My observations:
+ damn fast
- red/power button doesn't wors as power-down button and phone toggle
- no wireless/comm manager
- some bitmaps doesn't look very well (not a big problem)
- strange names in Buttons settings
- no palm messaging (but maybe it's jus me)
At the moment I'm going back to 6.1 with palm oems, but I do really cross fingers for you and your rom. If you'll put new version soon, I'm getting it! Great work!
Click to expand...
Click to collapse
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me

I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.

veisen said:
thx to u next version will be faster then this (i belive)
i need port original applications form palm wm5 to more usable on this palm
1-2 days for it
i dont like palm messaging
original is better for me
Click to expand...
Click to collapse
I would suggest using the Palm WM6 as a base for those apps, not wm5.

Merlyn_3D said:
I would suggest using the Palm WM6 as a base for those apps, not wm5.
Click to expand...
Click to collapse
5 is better because vodafone version is bigger and slower

miloszz said:
I used default messaging for a long time (so called "lite" version of 6.1)
The biggest problem for me is comm manager and power button. Accidentialy I flashed again to your rom so I'll stick with this one now, try to configure it for my needs (it's just question of few apps to cure most of "problems").
Can't wait to see next version.
Best regards.
Click to expand...
Click to collapse
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes

veisen said:
uploaded version wm6.5 with palm oem programs and commmanager and some small fixes
Click to expand...
Click to collapse
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.

i want to update to 6.5 but is it possible to go back to orignal at&t oem rom afterward to will there be some problem....???????
help......??????????????

hartleyshc said:
haven't tried the clean version, but on the new palm version, the soft menu is the old version and links like phone settings or today settings dont work. *have to use start menu*
also not able to connect to an exchange server. link to set it up in activesync seems to be dead.
red button, and wireless manager seem to work.
will check out the clean version as well.
edit: reset the phone. activesync, email, and exchange all work.
soft key bar still isn't like your first update *i assume it changed in 6.5, and this is the old version* and phone and today settings links in soft menu are still broken.
edit#2: seems the email account isn't listed in the accounts settings window. also at least one keyboard shortcut didn't work (whitebutton + P for brightness settings) i assume this has to do with the "weird" names programs have listed under buttons.
Click to expand...
Click to collapse
thx for test i repair it today

Just downloaded your rom, will let you know the details soon

Ok here is the review of this rom, the one with palm oem applications and commmanager,
Pros:
Fast and stable
Volume is better compare to 6.1
It has inbuilt mass storage driver which 6.1 lack
Shortcut are sorted in appropriate folders in start menu
Black Theme is default, which is very good
Display is better compare to 6.1
There are 2 flavour of Wmplayer
Comm Manager is now full functional
And More............
Cons:
Instead of green light to show the network now its showing orange,
Vibrate is not working
There is slight jerk in display while changing screen from one program to another
There is no Call screen, Mean when you are answering a call or had dialed a call you want be able to see the duration of the call.

Hi there, thank you very much for your great work. I have a quick question: My Treo has a German (QWERTZ) keyboard, will it be detected somehow?, or the ROM will asume its a QWERTY keyboard. I don't mind the OS being in English, that would even be better, is there a quick way to patch the ROM to make it work with the QWERTZ keyboard?
Thank you so much in advance.

About in call screen. It's all around ActiveCall and DialLookup plugins. Maybe changing some registry values will fix it (I had similar situations once and editing some registry solved my problems). Tomorrow I'll compare some of my keyes with working wm6.

-If your syncing to an Exchange server, the Manage Folders function does not work to be able to select addition folders.
-blank HTCSETTINGS icon under System.. appears to do nothing
- 2 PHONE apps under Personal settings. Different functions, but named the same
- There is something off with trying to go into Messages from the Today screen. Takes a few clicks to actually make it work. It doesn't do it everytime.
That's all I found for the moment.. obviously WLAN option does nothing on mine

I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.

i build new version today with all palm applications and battery test show me 14days
it is quickly then last version i upload it soon
it need some small fixes
UPLOADED 1st link

miloszz said:
I've noticed one more thing: there's no "white dot" indicating text input with active function key. It's a bit tricky when you try to type password and you don't see what you write...
But in general it works very well. But installing "hidelogo" caused reset loop and I had to hard-reset.
Great work!
EDIT:
Change HKLM/Software/Microsoft/Today/Items/"Dial Lookup"/Type from 4 to 6 <- it will fix active-call-screen-problem Works for me.
Click to expand...
Click to collapse
white dot not working on 6.5 i must copy some from 6.1 to make it works

czech version
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.

endymion said:
To Veisen:
Will you make the czech WM 6.5 clear version?
Can you describe differencies between clear and palm version and between 6.1 and 6.5 version?
Thanks.
Click to expand...
Click to collapse
clear is without palm applications and wm6.5 is fastest and stable
czech localization on wm6.5 i make soon
i can make other localized roms as deu ita spa pol .........
1st all try this english
i make localization on bug free version of 6.5