hi
i have installed iMate se rom on BA
its is faster every thing works fine
but alarms do not ring on time
i have turned off sync time on active sync
any ideas
thanks
faisal
Related
I know how to increase the volume normally.
However, I find that the maximum is still really quite quiet - often enough for me to miss my phone ringing when it's in my pocket, or for me to miss my alarm to get up in the morning...
Does anyone know how to raise the volume any higher? Perhaps past its normal maximum?
Thanks
Anjow said:
miss my alarm to get up in the morning
Click to expand...
Click to collapse
I also don't hear thealarm sounds. Anyone have a loud alarm ringtone?
me too! i still need other alarm clock to wake me
I'm using this alarm sound to wake me.
Re: Alarm Clock and good wake up wav file.
I use SPB Time.
Its some cool functions including multi alarm, plus real-time clock screensaver. :wink:
Link here.
http://www.spbsoftwarehouse.com/products/time/?en
Also I made a special wake-up wav file, it does the job for me. :lol:
I got the SPB Time program, and it seems pretty good - the alarm is loud enough. However, do you know if I have to have it running constantly for the alarm to work? I mean does it have to be up onscreen overnight if it is to wake me up?
Re: SPB Time
For the screensaver, you do not need the program running. Another thing about the screensaver is you can customise it not to come on with certain programs, for example Windows Media and TomTom Navigator 5.1 etc.
If you have set the Alarm, then yes the SPB Time has to be running, but the plus is you can turn your pda off and it will turn it on to view and hear the alarm.
That's odd... I have tried setting timers and the alarm and turning my device off - they don't seem to sound until I turn it back on again
Thats strange it worked for me (XDA IIi) and my friends (QTEC 2020i). I'm running WM2003SE, maybe try re-install and/or contact spb support.
can anybody else help Anjow???
Anjow,
I got this from SPB Support, if a re-install doesn't work this may help.
My alarms do not ring when the time comes and the device is in sleep mode. Why?
Most probably you have a typical Windows Mobile 2003 alarm problem. Due to a specific WM2003 bug the system scheduling functions may have unpredictable behavior on some devices. Even native system alarms don't wake the device up from sleep mode on many 2003 devices. For our regret this problem is operating system and device specific.
However there are some known workarounds for this problem that may help (but still a 100% effect is not guaranteed). You may try WakeupTweak from BurrOak Software. Try these links: http://www.burroak.on.ca/ptafaq.html and http://www.pocketpcfreewares.com/en/index.php?soft=876
Thanks very much, I shall take a look at the fixes.
Hi!
I have the OIIi also. When i use the SPB time, my PPC alway have frezzed. so now i am using the Chronos programs. it quite runing very good in the my PPC OIIi.
Anjow said:
That's odd... I have tried setting timers and the alarm and turning my device off - they don't seem to sound until I turn it back on again
Click to expand...
Click to collapse
I have found a usefull piece of software called PhoneAlarm which solves this problem.
In ADV settings, change the shutdown delay to 30 seconds, also to increase the sound quality and volume in calls, selcect TAPI Signal, then softreset. Then do a test on your Alarm program and it should work.
http://www.pocketmax.net/phoneAlarm.htm
Hi,
apart from alarm sound, is there any other patch or application to further increase ring volume?
Hi guys,
It's been great using Ivan's ROM for WM5.0.
I'm having difficulties in getting AlarmToday to work properly. My repeating alarms work but without sound. It only flashes the display message, LED and vibrates. The sound just refuses to play. However if I set the alarm without using AT's settings, the sound will play. I still need AlarmToday to make it repeat.
Does anyone know any other program that I can use to make my BA my alarm clock? I've been using AlarmToday to wake me up everyday when I was still on WM2003SE.
Please helP!
AlarmToday
Hi
I'm using pocket music as alarm (only one - wake up function :shock: ) and plays actually good.
Hi all,
I have a problem with the wonderful Chronos alarm/scheduling app.
I'm Running Duttys Touch v6.1 WWE rom with radio 1.64.08.21 on a UK Orange supplied TYTN II.
Can anyone using Chronos try or report the following behaviour?
1) Set up an alarm.
2) Force snooze option on and vibrate option on
3) When alarm sounds, snooze for 5 mins - screen turns off
4) When snooze alarm goes off, no sound; just vibrate.
After this the entire sound system is down. Nothing works i.e. Media Player, menu dropdown sounds, the lot. Only way to get it back is soft reboot.
Anyone else experienced this with Chronos or any other apps?
Thanks.
I dont think it's just Chronos. I have lost sound support after suspend on other programs but it hasnt happend often enough to record the entire chain of events. I'm running stock Att rom.
Was slightly suprised that a search of Chronos on these forums didn't find anyone else complaining.
Its very consistent with Chronos which does seem to suspend after snooze. Any fixes knocking around?
I used Chronos forever on my MDA but on the tilt I tried pocketalarm from wizcode. I've snoozed it and it's rung again every time.
I have the dcs 1.7 rom instaled however the alarm only vibrates when the sound is turned on! I have my phone on vibrate all the time so the alarm is no good if it doesn't work when on vibrate! I have tried other roms and it works as expected! anyone know of a fix or a freeware alarm app that may resolve this isue? I have put the rom on a copule of times so know its a problem with the rom and my phone! doesn't apear that other users of the rom are having the same problem as I have asked the question in the rom thread!
the strange thing is reminders work fine!
another thing i have noticed is if i leave the alarm after 4 minutes after it is set to go off it then starts vibrating!
My phone has developed a strange problem whereby it no longer makes any audible tone when someone rings! If I set it to vibrate, it does indeed vibrate, but if its set to ring, its completely silent. The incoming call notification is displayed from S2U2, and I’ve tried changing the ringtone to ensure it wasn’t having difficulty finding the file, but it doesn’t seem to work. I’ve verified the volume is set to ring, but its still not working. Has anyone experienced this or able to suggest a possible fix?
6.1 stock att tilt
I have the same problem and really like some help towad this matter. see mines is a little different it rings,but it's low but once the call comes to the end of the call volume get loud like it should at the begening. i thinks the cause of this is the s2u2 on my tilt . everything works but incoming call is so low ,I do't know someone was calling until they hang up the volume comes back it's like s2u2 ver.136 muffes my ringtone untile the call end someone please take the time out and give alittle help over here plz asp.
I have the same problem too. I changed from ATT stock ROM to Garmin DK 1.2 ROM and then after a month, the phone stopped ringing for incoming calls. I upgraded the ROM to Garmin DK 2 and the problem temporarily vanished and then started again after about a month.
Does anyone know about this problem? For now, I am installing the HTC Kaiser ROM to test if that solves the problem.
random freezing
I've been having the similar issues with my tilt. It freezes and will vibrate when a call comes, but no sound and it won't stop vibrating until i soft reset. It does it randomly and sometimes it freezes before the number can be displayed so it is shown as an unknown number and i don't know who's calling because after the phone restarts the last call is not in the history. I have a few programs installed like skyfire, tcpmp, s2p, and i use my bluetooth headset at almost all times and i still can't answer with the headset on. I also have the HTC home plugin installed but it came with the windows mobile 6.1 update.
idea
Hya,
I had the same problem with my Niki and it intercame even with the Kaiser.
On Niki the problem was on WM6.0 .. after I upgraded no problem came. The "vibration freeze" never happened again and it's ringing every time.
On Kaiser the problem was in mirror. The ringing functioned well with WM6.0 and the problem came with the upgrade to WM6.1.
I can only think that the problem was that the ROM was broken but not sure.
An idea which I can gave to you to resolve a bit the problem is to install SPB phone suit where you can set ringtones to the calls, SMS, MMS and e-mails (and on newer versions maybe to many other things). It worked on my Niki `till I didn't upgraded (I didn't try it on WM6.1).
Never tried on Kayser but it worked for sure on Hermes.
Just try it, you can be sure that you don't brake anything and SPB phone suite for me was a usefull prog. Friendly interface, easy use and VERY usefull.
Have luck