Related
Guys,
When I got my P3600 some weeks ago I didn't experience any problems with problems with calls dropping. But ever since I've upgraded to WM6 I am experiencing this problem... the calls drop at random, sometimes I can talk for hours without any disconnect, and sometimes the call drops and I cannot even call the person back... And even after downgrading to the shipped rom, I still have this problem... That made me wonder if maybe I have had problem when I got the device but at that point I was just lucky not to have calls dropping.
Yesterday was the last time a call dropped on me. I couldn't call the person back, the phone didn't establish a new connection. When I finally got the person back on the phone (2 minutes later) he/she said that the whole time she thought I was driving through a tunnel and that I would reconnect because... I stayed connected at the other phone... After 2 minutes, she said, the connection was finally broken and that's when I was able to call again.
So sounds to me that windows mobile disconnects me and that the operators network still keeps my number connected.
Well, needless to say, I want to fix this issue. I have a 3G Vodafone NL subscription but I read that 3G could be the cause of my issue. so I've just disabled 3G. Now I'm just running on GPRS... Which isn't how I want it to stay. Any ideas, same experience/ pointers how to solve this?
Thnx. Arend
Reply from HTC
This is the reply I got from HTC:
Try to remove it off 3G go to settings / phone / band - then select GSM from the top drop down menu.
Should now reset.
If it comes up with an error, turn on flight mode then do the above again.
Click to expand...
Click to collapse
So based on this reply it seems that 3G might be causing my issue.
I replied to HTC:
I have followed your instructions but now I can only use gprs... but I have a 3G subscription with my provider. So even if this workaround works, it's not to my satisfaction.
Pls advice.
Click to expand...
Click to collapse
I'll post their reply.
Further, if someone has more info on the subject please let me know.
Same problem here...
No issues before upgrading to WM6. Sometimes the call drops out after a few minutes, sometimes a few seconds, and sometimes already after a few rings. The other day I had to make a call 5 or 6 times to finish the conversation - very annoying...
I'm running the first official Australian WM6 release for Dopod/HTC, i.e. the one that got pulled off the web for a while. Possibly going to the newer release of the ROM update solves the problem? Even though I think both versions run on the same radio ROM.
I've used the same rom as you to upgrade to WM6. But in my case, even when downgrading to the shipped rom, I still had calls dropping. And like you, sometimes after minutes, seconds etc.
Still having no drops since I have turned 3G off. But I just wanted to look something up on the internet... took minutes to get the info on my screen with GRPS, so it's not much like a solution.
This is the reply of HTC:
Dear sir,
Regarding your situation with the device , I would suggest you, to? resolve your issue with the network coverage ,to practice a hard reset on your mobile with the following step:
START -> Setting->System->CLEAR STORAGE and follow the procedure, if you have already done this manipulation , I would direct you? to this service and check the right number on this area with your network ush the green button to call->then go to menu-> option ->Services->select the on the following list ->Voice mail etc-> and then get setting -> and check that the number is right with your network provider.
Click to expand...
Click to collapse
Needless to say, but I'll say it anyway, I have performed hard resets... indeed, multiple
The second action they adviced, sounded a bit strange to me. But when I retrieved the settings I saw that there was no number filled in for voicemail. So I've entered 1233 (Vodafone NL voicemailnumber).
So maybe the last action has nothing to do with my issue, but who knows.
So now I am running again on 3G. I'll keep y'all posted.
Just checked it on my device and there is already an entry under voice mail. So I severly doubt that it has anything to do with the voice mail settings, too.
No, I guess you are right.
Further, since I am running 3G my signal I noticed my signal is weaker then running GPRS-only. My calls have not dropped since but I do get complaints that people sometimes cannot hear what I say because my line goes dead, and a moment later it's back again.
I've got another reply from HTC:
---
If a hard reset didn't solve the problem and the problem only occurs when switching to 3G, than this can be caused by the following;
1. Problem with the device.
2. Problem with the network, ???
I would suggest to test your SIM in another HTC device with 3G and see what happens. If it happens again than it is a? problem with the network. If it works with that 3G device than it could be a faulty device. The experience is that it is related to the 3G network himself. If it is a network issue, than you can ask them to deactivate the 3G/HSDPA.
We can't find this out for you in the UK, you need to see if you could determine the problem yourself.
---
Thus the support of HTC.
So now I have written an email to vodafone. I'll keep you posted.
Same problem !
Try to flash your device with ROM_Radio 1.41.00.11,
Friendly
Barichon said:
Same problem !
Try to flash your device with ROM_Radio 1.41.00.11,
Friendly
Click to expand...
Click to collapse
Ok... but I'm somewhat confused... are you experiencing the same problem with 1.41.00.11? Or did you solve the problem by flashing to 1.41.00.11?
2----> solve by reflashing with 1.41.00.11
Ok, I've upgraded to 1.41.00.11.
So far, I've experienced no calls dropping on me.
Nevertheless, I've also made a phonecall to Vodafone explaining the issue. They acknowlegde the issue... SAY WHAT?!! Yes... they acknowledge the issue and recommend turning the device to GRPS only. WHAT?!!.. Chill, they can at least try that, who knows, maybe I would have said yes.
So, I explained GPRS only is not an option since it is a tiny bit slower then what I am paying for.
They've put the call through to their 2nd line and keep me informed. So as soon as I hear something I will get back to you.
ps. What I found very great is that they did not cut it off with "Ow, you are using the HTC P3600... I'm sorry, we do not support that device." Vodafone NL, keep up this great level of support!
Ok, so far I've heard nothing from Vodafone. And so far I have had one call that dropped. So although that is a huge improvement, it still sucks.
So... now what? The way I see it:
1. I want to have fast internet on my PDA (3G), so only GPRS is not an option
2. There are problems with the 3G network which make calls drop every now and then
3. Vodafone isn't going to fix this in a short period of time.
So the question is: what is more import to me: 3G or a reliable phone connections?
The answer is: reliable phone connection.
So I will switch my network to GSM instead of auto and when
I really need fast internet I will switch to 3G.
Case closed... well, not really... but still, case closed.
Hi
I think is not the operator problem and could be the phone problem, I am using the D810 in Singapore with Starhub and have the same problem with drop calls once I use 3G network. If I switch to GSM only than is perfect no drop calls and calls quality improve also.
So sad having a 3.5G phone and can't use 3.5G service
Could be, but HTC and Vodafone confirmed me that it has to do with the 3G network. And I do not want to know the technical details about all that so I'll leave it at that.
Has anyone gotten VoIP to work with the kaiser? If so what provider are you using and what CAB?
I use VoIP with PBX in a Flash (home asterisk pbx). Click the Kaiser rom link on my sig. The VoIP cab I'm using can be found in the "recommended goodies" section of the first post there.
Thanks, I have downloaded the client and am looking for a VoIP provider that is proven to work with Windows internet calling and if possible the settings to go with it.
Bump......
Has anyone been able to use voip with the ear speaker yet? ( with the kaiser )
I use the Fring application to access Skype. What service/provider can use the built in voip?
jinkazama007 said:
Has anyone been able to use voip with the ear speaker yet? ( with the kaiser )
Click to expand...
Click to collapse
not yet. figuring this out is a pet project of mine. itmt I've gotten used to it. The Kaiser's main speaker is on the back in the same place so it works about as well.
I seem to have gotten calls to finally be accepted by I can't seem to make any outgoing calls from the phone via VoIP with SleuthKaiserVoIP.cab install. I think I'm missing something. I keep getting this following error. "Network service is not available. Try again later."
I had the same problem, but try this procedure on clean device (after hard reset), it works on my device:
1. Install SleuthKaiserVoIP.cab.
2. Install SipConfigTool_2_0_1.cab
3. Go to SipConfigTool and set up your provider.
4. Restart device
Now you can go to phone preferences and enable Internet calls.
ps. I'm not sure but when I install SetupVoIP_v0.3.cab with SleuthKaiserVoIP.cab problem occurs. With SipConfigTool everything work fine.
Thanks, I finally seem to be able to place calls and receive them but I can't hear anything nor can the other person hear me. I also noticed a bug but I'm not sure if its related to the first one where the other person can hang up and it says on the call with my phone as if the other person was still there. Any help would be greatly appreciated.
What operator do you have dan366?
I currently have VoipCheap but I'm willing to switch to fix this.
Bump......
simple it dont work properly
dan366 said:
I currently have VoipCheap but I'm willing to switch to fix this.
Click to expand...
Click to collapse
Sorry, what service provider is your phone through (some block VoIP).
I tried using it with AT&T's 3G network.
Please help me aswell
Mate, i just have had enough of this VOIP, i did managed to sucessfully configure the Service provider but when i am receiving call i cant hear the other person, they cant hear me and within 15 seconds the call disconnects, can you help at all !!!
So I fanally got my Kaiser yesterday And It kicks @$$ XD
I live in Mexico, So it is an unlocked unit, and it recognized my local cel network as soon as I turned it on with the local carrier's sim (telcel).
One problem though: I can receive calls, but not make them... after dialing, I get the call dropped about 5 seconds later without tone that says "Call Ended" with time 00:00.
Anyway to fix this =(
I've tried the search and nothing popped out. Thanks! =)
- Jim
Sure
Welcome to AT&T.
I left verizon (due to their crippled hardware). I get virtually no signal in various parts of L.A. including my home. You place a call, their signal goes to zero, your call ends.
At least that's my 0:00 story.
I would like to reply to this...because I've been having this problem with AT&T consistently since I've come back to school (I go to school at Texas A&M in College Station)
I guess I could copy and paste a lot of stuff about it, because I've done a lot of posting about it on AT&T's forums...but I'm too lazy so I'll just put the link.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=76225&jump=true
My problem, however, is that when I have this condition, I cannot make OR receive calls (received calls go to voicemail, and although I see that I have a missed call or a voicemail message...I can't call the voicemail or I get Call Ended 00:00)
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
I hope my topic on AT&T's forums has some helpful information
Subversive Asset 2.0 said:
I would like to reply to this...because I've been having this problem with AT&T consistently since I've come back to school (I go to school at Texas A&M in College Station)
I guess I could copy and paste a lot of stuff about it, because I've done a lot of posting about it on AT&T's forums...but I'm too lazy so I'll just put the link.
http://forums.wireless.att.com/cng/board/message?board.id=cingular&thread.id=76225&jump=true
My problem, however, is that when I have this condition, I cannot make OR receive calls (received calls go to voicemail, and although I see that I have a missed call or a voicemail message...I can't call the voicemail or I get Call Ended 00:00)
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
I hope my topic on AT&T's forums has some helpful information
Click to expand...
Click to collapse
It sounds like the information on your SIM card could use an update.
Call AT&T and ask them to send an OTA to your SIM. If you don't have a current IRDB, your phone may not be picking up the correct tower or signal in your area.
I am not actually using it with AT&T... I use it with Telcel, a Mexican Cell Phone Network Service Provider, because it is where I live =).
Anyway, got it to work after a while. I went to Settings (Personal tab) > Phone > Services
I updated the data there; I also "re-found" my network in the network tab, but I'm pretty sure the first procedure got it going.
Tanks for your time.
When my phone was working, I tried to call AT&T locally, but they didn't know what was going on and didn't find anything wrong with the "network"
Subversive Asset 2.0 said:
What I found was that whenever I'd call, the icon in the upper right hand corner (the one with the signal bars) would change from having bars and the phone icon to having bars and the 3g icon...it looks as if the phone TRIED to start dialing as a phone call, but changed to data, which knocked out the call.
If I connected to the internet, then I would get the H sign (so I know that 3g works). If I try to call with the H symbol, then the call connects every time.
If I use bandswitch, then I can eliminate the problem by FORCING the phone to go into 3g (UMTS) mode OR by FORCING the phone to go into Edge (GPRS) mode...the problem only exists when the phone is in auto mode (on bandswitch) or if bandswitch isn't installed. My problem is that bandswitch isn't a free program...so I only have a few more days of the trial before it expires.
Click to expand...
Click to collapse
Under phone settings, there is a tab titled "band" (assuming you have it set to be shown, i think kaiser tweak/ reg editing can expose it) that you can switch between gsm and wcdma (G/E or 3g/H). I had that same problem when i first got my phone. i changed out sim cards a time or 2 and finally got everything working when i manually set the radio to one or the other. I've updated the radio a few times since then, but i still keep the switching manual, in an attempt to conserve battery power (I only need 3g/H when i'm online).
The problem with that is that AT&T branded Tilts never have this tab "band" and kaiser tweak doesn't expose it (I don't know what specific registry edit would expose it)...so I can't just switch between gsm, umts, etc.,
** Of course, I didn't check for an updated version of kaisertweak. One of the topics says it hasn't been updated in a while even though it has?
Yes, even WITH the latest version of kaisertweak and the latest version of the XML, turning on band (and then softreseted to make the options stick) does not make a "band" tab
Subversive Asset 2.0 said:
The problem with that is that AT&T branded Tilts never have this tab "band" and kaiser tweak doesn't expose it (I don't know what specific registry edit would expose it)...so I can't just switch between gsm, umts, etc.,
** Of course, I didn't check for an updated version of kaisertweak. One of the topics says it hasn't been updated in a while even though it has?
Yes, even WITH the latest version of kaisertweak and the latest version of the XML, turning on band (and then softreseted to make the options stick) does not make a "band" tab
Click to expand...
Click to collapse
curious, did you run the decert cab to allow unsigned code to run on your phone? could that be stopping changes from occuring?
heh, time to jump into the 'VOID' then? hardspl it and join the ranks of those who haven't bricked their phones yet! I guess i was lucky to have the band tab on the htc version.
I'm not sure how I would even know if I've run the decert cab or not?
Even though I guess this is the namesake of the site, I wouldn't want to change my ROM even though the AT&T ROM is doubtlessly inefficient as (insert inefficient thing here). To me, unless I know why the problem is happening, then attempting any solution seems counterintuitive (like giving the man the fish instead of teaching him).
So AT&T suggested just randomly sending a new SIM card (yet I know from other people's experiences that that doesn't necessarily end the problem) and AT&T has suggested to others that they get a new device (which has also not necessarily ended the problem.) These are just as shallow solutions until I know why the problem exists in the first place.
Jimmyy said:
So I fanally got my Kaiser yesterday And It kicks @$$ XD
I live in Mexico, So it is an unlocked unit, and it recognized my local cel network as soon as I turned it on with the local carrier's sim (telcel).
One problem though: I can receive calls, but not make them... after dialing, I get the call dropped about 5 seconds later without tone that says "Call Ended" with time 00:00.
Anyway to fix this =(
I've tried the search and nothing popped out. Thanks! =)
- Jim
Click to expand...
Click to collapse
Hey Jim,
I wonder how no one has pointed it out till now, but MAYBE it could be a problem with the Radio rom in ur phone.
Have u tried upgrading to a different RADIO? do u know which version it is?
The following radios have been doing great with ppl around here...
1.27.12.17
1.27.12.32
You can download them from here:
http://forum.xda-developers.com/showthread.php?t=349375
Try flashing one of the above mentioned and see if that solves ur problem!
hope this helps!
I guess you were addressing Jim, but I think I simply need to know if 1.27.12.11 for Radio is a known faulty radio (because that's the radio *I* have...so if other people know it to be faulty, then that's great for research)...and why? If so, then that would be the reason why it doesn't work (which is what I'm looking for) and then I'd be willing to switch easily.
But not before then.
Checking the radios topic, it seems as if no one reports a problem with 1.27.12.11
so...I don't know if switching is going to fix anything
I'm putting my problem on hold...it seems like it can transition better now and call out or receive calls better.
I've had the same problem with Telcel until I upgraded my SIM card to a 4.0.
The replacement costs $110 pesos (about $10 USD) and it's a quick and painless procedure!
Note: I still get the occasional call drop, but it improved things dramatically.
Try it out!
Cheers from Tijuana!
Rayan
my friend, I have the same radio 1.27.12.11
and the same problem.
I just found this topic searching why my phone do not work at 80% of the time, the mobile provider here in argentina recently told me "your phone have a problem" so I'm in crisis.
Let'see what happen updating the rom / radio / etc !!!
Hey Every1,
While surfing the web lets say on a HSDPA connection if someone tries to call me they are automatically sent to my voicemail. I then get a text some time later saying I missed their call. The only way to solve this is to not use the internet and then disconnect the data session by clicking the h in the top bar.
Ive been searching through the forum and on the web in general and have seen this problem mentioned in regards to vodaphone but not t-mobile. In fact with t-mobile I have read that it should/does cancel the data session automatically to allow for the call or drop down to 3g so that call can be taken.
1) has anyone else experienced this problem?
2) if so is there a soloution? The only one I can think of is to disable hsdpa in the registry or set connections to cancel data connections after a small period of inactivity.
This is kind of frustrating when ure trying to find a friend and using google maps and he/she cant call get hold of u cos it keeps going to voicemail!!
Any help/other users on t-mopbie uk commenting on whether they suffer from this problem would be appreciated.
Im running standard tmobile radio (1.27.12.32)
Thanks
I'm using the 1.27.12.17 radio, and can make and receive calls when on an HSDPA connection. I'm on T-Mobile, too. Possibly change the radio and see if that makes a difference?
I get the same problem when using data on the HSDPA connection. When using 3G, the call will go through.
According to this: http://forum.xda-developers.com/showthread.php?t=321596 it is likely to be a network problem. Is it worth asking T-Mobile about this? Are people on other networks having this issue too?
Prufrock said:
I'm using the 1.27.12.17 radio, and can make and receive calls when on an HSDPA connection. I'm on T-Mobile, too. Possibly change the radio and see if that makes a difference?
Click to expand...
Click to collapse
Is that radio a standard t-mobile one or did u flash that ureself? Thanks
Did a bit of diagnosis and further reading on other info from other sites.
It appears I am not alone, and unfortunatly the information is varied some saying its networ and other the phone.
Its not just HSDPA but 3G to, if ure doing some data donwnloading it wont allow u take a call. The only way to have data and the ability to recieve calls at the same time is using standard gprs, which kind of defeats the purpose of having this phone in the first place. Here are some things i tried.
1) HSDPA ON - tried looking at some pages and whilst i was downloadin called from my other mobile to my kaiser, no luck took a while then went to voicemail. Once it finished downloading and it was inactive (but ie still up) it dropped down to 3g and accepted incoming calls. Also i tried to make a call while surfing and it worked fine. When i then rang from a 3rd phone whilst on the call i made it recieved it in hsdpa mode no probs (call waiting).
2) HSDPA OFF - Same as above to be honest not even worth dropping down as u cant even tell if it will accept calls as it just says on 3g rather than dropping down.
3) UMTS OFF - Works fine recieves data and make and recieves calls.
This is really annloying as it defeats the purpose of having this phone. Im quite happy to not surf and talk at the same time but i dont want to miss important calls. Id really like to know if any1 else is experiencing this problem and what they did about it, whether it is indeed network specific or a problem with me/all kaisers.
This also means u really cant have skype and or msn signed in all the time as it wont auto disconnect when a call comes in.
Thanks
thanutz said:
Is that radio a standard t-mobile one or did u flash that ureself? Thanks
Click to expand...
Click to collapse
Flashed it myself.
Prufrock said:
Flashed it myself.
Click to expand...
Click to collapse
Awesome...and everything is working fine on that rom? Did u have the rom I had to begin with?? Just debating whether flashign the radio rom may cure my problem
Thanks
Anil
Prufrock said:
Flashed it myself.
Click to expand...
Click to collapse
oh one last thing, when u flashed the radio rom did put a different software rom on it e.g. from t-mobile to htc original? As u had a radio file did u bother to sim unlock...how did it go...
Sounds like i might just flash the radio rom to see if it cures the problem and might aswell sim unlock it at the same time. Just curious to know ure experiences
Two links one 2 the radio u said and one to radio dump tools
http://wiki.xda-developers.com/index.php?pagename=Kaiser_Radio
http://forum.xda-developers.com/showthread.php?t=359015
Someone on T-Mobile please comment.....
Hi,
I'm on T-mobile UK, I'm on the standard WnW so dont have the HSDPA, but I did have the same problem on 3G, couldnt take calls while surfing.
It was bugging me as hell. After some research (out here and on some other forums) I tried the bandswitch app to change the band to GSM (it was on 'auto') and it worked. After a couple of days, I uninstalled bandswitch and reverted to 'auto' again and everything worked fine. I havent had problems and its been over a month now.
Regarding sim unlocking and CID unlocking, I've done that recently. I was on radio version - 1.27.12.11 and am now on 1.27.12.32
just waiting for a good stable 6.1 rom and will flash then.
hope this helps.
cheers
Thanks Koowdewil im gonna give that a try
Do u know where i can find the bandswitch app that you used???
here: ??? http://forum.xda-developers.com/showthread.php?t=286844
I emailed T-Mobile about this and here is there response:
Dear .....
I am afraid this is normal for this device. When you are browsing the web and the page has already loaded then the call will come through as normal. However if the device is still in the process of downloading the site then the call will go to voicemail. I am afraid there is no way round this issue as this is the way it has been designed by the manufacturers. Please contact us if you have any further queries. Thanks.
Regards
Stephen
T-Mobile
Yes, you could try there or just google it, danielherrero is the developer. I've heard about t-mobiles response but after switching the mode to 'gsm' for some time and then reverting back to 'auto' I havent had the problem.
Thanks so much gonna give this a try
I'm on T-Mobile UK and have flashed Duttys new 6.1 ROM and am experiencing this same issue. any ideas which is the best 6.1 compatible Radio for T-Mobile Uk?
Funnily enough I have started badgering T-mo UK about the 6.1 update already and they have started using there normal excuse of doing heavy beta testing compared to other CPs.
Typically ignoring them I am awaiting a response from my contact on the inside about the 6.1 update release....
With regards to the Call/HSDPA/3G issue I cannot say I have experienced this however 90% of the time mine is fixed to GSM lol
I've got a 3 PAYG sim and TM contract. Just tried this with 3 and call came in when streaming with realplayer and loading internet page no problem.
Same with test with TM too.
Using Duttys 6.1 with 1.64.08.21 radio.
Im on T-mobile UK with webnwalk and having no problems with this, I used a tweak to enable hsdpa/3g on continues so its always ON...
I can still recieve calls while using the inet at the same time.
Hi everybody, I am using GPRS and facing the same issue; No incoming call while GPRS is on... so any idea ?
regards
Hey Everyone,
I'm hoping somebody can point me in the right direction.
The issue I have (it's on ALL of my WM phones) and it's an issue with my provider. Anytime I am on 3G, the timestamp of my received SMS' are exactly one hour behind. So if my phone drops to EDGE or GPRS, my received SMS' timestamps are correct. My provider, no matter how much I complain (this used to even happen with a WM device I bought from them!) they always say they will do something about it yet they never have. And a FYI for anyone that is going to recommend me using the timestamp cab fix, that does not solve this problem.
Now the only workaround I've been doing for a the longest time is forcing all my phones onto 3G however there are spots which have no 3G so if I'm in the middle of a phone call, my call drops or I don't get any SMS', etc.
I've gotten sick of the dropped calls (I'm mostly in my basement which gets 3G only in certain parts of it) so I've been using my backup iPhone 3G (which doesn't have this problem, go figure) until I can find a registry tweak or something to force my Blackstone to use the phone's actual time vs my providers SMS timestamp.
Is there anyone that can give me any place to start looking in the registry that I can play around with the figure it out?
Thanks in advance for everyone for their help. I love this community!
Bump. Anybody?
RJ45 said:
Bump. Anybody?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=659831
I will be giving this a try. Wow thank you so much for the link!
Update: This solved my problem. Thank you again so much!