Hi,
every time I turn my O2 Xda lls on, on my screen, I see a message window wich asks "to enter the name of the device driver for this card" and every time I turn on the wi-fi radio the same message appears and the radio don't starts. Can anyone help me?
i have the same error. i am using a BA, PH20B1
I dunno if this really matters... but with my old HP PDA I had to send them back when I recieved that message because something on the board fried that was related to the wifi.
Related
I recently bought an XDAIIi from ebay knowing that it was defective. The only defect is that there is no service. Apart from that it is working as a PDA perfectly doing the job that i got it for (SAT NAV). Now i starting thinking of the possible reasons that my phone has no service. So in order to check if the hardware of the phone is ok i tried to do a manual network search. When i clicked on the manual search i got an error message saying " Unable to read setting from the network. Try viewing settings later, or disconnect data connection and try again". Are there any ideas of what this message means and is there any way to actually fix it?
Note: I am running pug rom with the 02 stuff stipped.
Your Radio hardware is busted to the best of my knowledge ...
you should hard reset.
I managed to kill the service on my 2i once, I cocked up the registry somehow and as soon as I put my pin in it pretty much straight away showed the no service icon (the one with the exclamation mark) regardless of whether I then tapped on it and tried to get service.
Had to hard reset in the end and bingo the problem disappeared (as I suspected it would), but your problem sounds terminal.
are you sure it has not been blocked / black listed with uk networks.
typical reason for no service would be if it had been blocked?
Didn't think of that...
My alpine crashed while driving with tomtom today and I have exactly the same problem.
Looks like it hard reset time.
Hi!
I have problems with SMS. When I send SMS to the number which usually sends a message back to me with my credit amount level, nothing happens (with "ordinary" mobile phone it works perfectly fine). Also I do not get Delivery Reports from any number.
But when I put my friend's SIM card (same operator) everything works fine - I get messages back, and I also get delivery reports for messages that I send to other numbers (any other number).
Also, when he put my SIM card in his HP iPAQ 510, it works fine.
Only thing that is different is Call Options > Phone number.
I can not enter my phone number in Settings > Phone > Call Options > Phone number. There is "Unavailable" written in that field and I can't change it. I can't even get that field focused.
When i insert my friend's SIM card, that field shows his number. Same with my SIM card in his phone - number shown.
I think that field might be the reason why SMS is not working the way it should. Maybe that field is used as a number from which the message is sent, and because it is "Unavailable", credit amount service can't send the message back to me. Same with delivery reports.
Do I need to do something with my SIM card to make it work correctly?
Please help!
Phone info:
HTC MTeoR
ROM ver.: 1.34.251.1
Protocol ver.: 32.71.7020.12H
Radio ver.: 1.38.00.10
OS ver.: 5.1.465 (Build 15673.3.3.1)
Just a small update:
When I turn off the phone and then turn it on, I can send the SMS, I get the delivery report, and also I receive a message from "credit amount" service. But, after that first SMS it doesn't work any more. I have to restart the phone again to make it work.
Help still needed...
try a softreset if fails then hard reset...
or goto xda ftp u will get some network config files...install them...
malhaar said:
try a softreset if fails then hard reset...
Click to expand...
Click to collapse
Tried it, and still doesn't work.
malhaar said:
or goto xda ftp u will get some network config files...install them...
Click to expand...
Click to collapse
Couldn't find it, do you know exact location / link?
I requested from my mobile operator to give me a new SIM card. After they did, phone started to work normally
I have been doing a lot of reading on this forum about this problem. I think my problem is just a tad bit different because I cannot get the phone to recognize the USB connection all the time. When I do, I'm not sure how to use MTTY to get to the "cmd>" prompt.
Right now, my phone has booted into the WM6.1 release from HTC and AT&T but cannot be recognized by the Mobile Device Center on Vista. Also, MTTY does not give me the option to select USB. My sim card and MicroSD card are not in the device. I've replaced the battery with a Seidio 1600mAh as I thought this had to do with the battery not getting a good connection or charge. That has proved to me incorrect to a point because my phone will boot into the OS more now than it did before.
Since I cannot connect the phone to the Mobile Device Center, I reset the device and it immediately goes to the bootloader screen. I hook up the USB cable is the phone does not recognize the connection. It still says "Serial" at the bottom. The other information given is KAIS1*0, SPL-3.56.0000, CPLD-8.
I need help. I got this phone over a year ago as a refurb from AT&T. HTC has asked that I send the phone in for repair but I'm sure that will cost about the same as the phone originally did.
Please help.
Can anybody help with this?
Hello,
Everytime that i restart my phone it shows a warning icon on the notification bar, saying No Service, then i press on it and it puts me in Network Operators, then i need to pick one from the list and it works, but everytime i pick the same one and it always resets after format, what is going on?
Edit: i have tried a new simcard that got a pin code to it, and same thing, everytime that i restart the phone it is asking me to insert the pin code, how can i fix it ? i heard it got something to do with phone branding
Hello!
Ok, my Samsung Galaxy S4 mini had a netlock on the network "3AT" - if i put in an other sim-card than one of "3AT", it asks me of
an netlock-unlock-code. First i tried to load other roms in the phone, also some cyanogenmods - but logically it doesnt worked .
Good - the next step was, to get an unlock code and put it in the phone as it asked med. OK, its says, that the netlock was gone
and the message to give in the netunlock-code never appear again.
But, if i give in an other sim-card than a "3AT": it knows the sim, it asks for a pin and it shows that it is connected to the specific network,
also shows me a signal strenght, ok - but if i would do a phone call, it says "no connected to network". I have tried everything - factory reset,
load other ROMS, also cyanogenmod, but nothing happens, always the same problem. I also tried different sims, no one worked, only the
original sim from "3AT"?
One interesing thing: there shows me a complete wrong phone number in the settings under "own number"???
Any idea what i could do?