A2DP Question - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I recently installed the rom "Cingular_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP-fixed.exe"
I paired my HT820 headset, but A2DP is not working. Is there another setting somewhere? All I get is a handsfree device once I connect.
Thanks

Help from a total Noob:
First off, I don't know about that specific ROM... but...
Go to Start, Settings, Connections Tab, Bluetooth, Devices Tab, click Motorola HT820.
This should show you the settings to turn on and off... One of them should Wireless Stereo...
I'm too much of a noob to help past that...

help from a non n00b, refresh the services in the bluetooth menu. if it does not say wireless stereo, then download the cab file called zoA2DP.cab that's below. Run that, reboot (might not be necessary), and try again. that should work.

question:
do you copy the zip file to your phone...then extract or extract on pc and copy all to a folder on the phone?

Now THAT's using the search function. This thread is as old as the hills, but you just put the file on your device and double click. Follow the inst. from there.

Thanks, I will Let you know

Yes, please use the search functionality. Also, to make specific searches, make sure you only look for my articles in the General forum because I've also published the solution some 8-9 months ago. See http://forum.xda-developers.com/showthread.php?t=279459

Related

Please, am i missing something

I have searched through the posts and cant work out what i need to do, my bluetooth works for most things (syncing, sending files etc) however it cannot recieve files from another phone or pc. Only with activesync does it work to recieve.... Any ideas? do i need a new stack?
Cheers
Hello! Have you enabled "Receive all incoming beams" in Settings/Comms/Beam?
Thankyou very much, that was the problem. I thought beams were IR or something. One last question, i am now able to receive files but is there any way to browse the PDA via Bluetooth from my laptop? again it says, it cannot do this.
Navigation from your Laptop
Hi
You have to pair your BA with your Desktop installing the "OBEX File Transfer" service. So you would navigate in your PDA.

Tmo Wing Bluetooth problem

for some reason with my bluetooth headset turned on as i try to locate my device even though they're side by side it can't locate and pair with both devices.
Edit.. Sorry i just fully read the bluetooth manual and its required that you hold the task button down for 8seconds so that it maybe recognized by other bluetooth devices.
Posted incase anybody is as ignorant as myself
wow i bet u dont have the visibilty on

Kaiser And Nokia

i HAVE A KAISER TILT ALSO KNOW AS ATT TILT AND AM HAVING TROUBLE DOWNLOADING MY CONTACTS TO MY NOKIA BLUETOOTH CAR KIT HAS ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST IS THERE ANY SOFTWARE I NEED TO ADD TO THE PHONE. I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL. ANY HELP WOULD BE GREATLY APPRECIATED.
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
anaethelion said:
First, STOP YELLING !!
Second, try using the enter key sometimes.
Third, i didn't read your post, can't help ya, sorry.
Click to expand...
Click to collapse
dude? why?
hey man sorry that guy was such a jerk dont want that to be your first expericne here as long as you search before asking most people will be more then willing to help you. sorry i cant help ya though. my only guess is maybe did you install a wm 6.1 rom? they have some probems with bluetooth but i dont think thats it
Did you try it without Jetware? Made sure your bluetooth was set as discoverable? Paired the device? The more info YOU provide as to what you've done, tried, & what setup you've done it with...the beter the help & answers you'll get.
I'd suggest filtering through the following threads. There have been similar problems fixed:
http://forum.xda-developers.com/showthread.php?t=364559&highlight=Kaiser+Nokia+car+kit
In the above thread the original poster solved his nokia carkit issue following this:
1. Pair the TyTN II to the car (Nokia HT-2) phone.
2. Switch car ignition OFF and switch off TyTN II.
3. Remove SIM from TyTN II.
4. Place SIM into a compatible phone (in my case Nokia N95).
5. Switch on N95, switch on Bluetooth, switch on Remote SIM access.
6. Change the Bluetooth ID name on the N95 to the same as the TyTN II.
7. Make phone discoverable via Bluetooth.
8. Switch on car ignition - car phone will not be able to connect.
9. Using car controls search for new device.
10. When N95 is found, select connect, it will use the same user profile as the TyTN II (if you selected the same name for the Bluetooth ID).
11. On the car browse to Settings - Phonebook - Update, this will then import all your contacts from your N95 (or compatible phone).
12. Switch off ignition and switch off N95.
13. Replace SIM back to TyTN II.
14. Ensure TyTN II Bluetooth is ON, Remote SIM is ON and the phone is Discoverable.
15. Switch on car ignition - car phone will not be able to connect.
16. Using car controls search for new device.
17. When TyTN II is found, select connect, it will use the same user profile as before.
18. Now browse the car Phonebook as normal - All your contacts are now available for you to use.
19. Don't forget to turn off discoverability on the TyTN II and to rename your compatible phone (N95) to prevent any future conflicts.
This worked for me! I hope it will work for you! Good Luck!
I did try it with removing the jetware the bluetooth works fine but cant download contacts is there anyother patch or software more compatable with nokia bluetooth devices. Jet ware is good but wont let me disconect call when done any one else have an issue like this
BOBBYDS1 is your connection between the Kaiser and the Car Kit using Bluetooth as a headset (in other words the phone still functions and you can look up and dial with the phone) or is it using rSAP (Remote Sim) which switches your Kaiser into flight mode.
I ask this as it will determine which way you look for a solution. If its using rSAP then most Nokia systems that are fitted into cars as factory fit have not yet developed the correct software to communicate with Windows Mobile devices, in which case you will need to remove Jetware from you Kaiser and use my solution on a previous post as quoted above.
http://forum.xda-developers.com/show...+Nokia+car+kit
Mark
The phone still functions as i can disconnect by the phone it self here is the thing sometimes I can disconnect call by the nokia bluetooth device but a lot of times I cannot disconnect, i have to pull phone out of my pocket and end call
@BOBBYDS1 and fb.knight
No offence guys, but you need to go back to Junior High and learn how to use commas, question marks and letter cases.
Posts like that will rarely get you any kind of a reasonable response.
what nokia bluetooth car kit are you trying to use?
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
IT is a Nokia CK15-w Bluetooth Car kit Here is a link to it. http://www.nokiausa.com/A4431279
Also I can surf the internet while it is connected to the bluetooth.
Looks like that model supports:
Hands-free Profile 1.5, Phonebook Access Profile 1.0
(Source: Nokia Europe
The Kaiser supports:
File Transfer Profile, SIM Access Profile (rSAP), Dial-Up Networking Profile, Personal Area Networking Profile, Hands-Free Profile 1.5, Advanced Audio Distribution Profile (I'm guessing A2DP)
(Source: www.theunwired.net
So I'm guessing that whilst it will work as a glorified headset, you have no chance of getting your contacts downloaded! Should be able to get them from your SIM, just not the main memory. Wonder why Nokia removed the rSAP profile? It was on their 610 (rSAP only) 616 (rSAP and Handsfree) then from the 810 and CK-15 it seems to be handsfree only. This could be why so many are having problems with Nokia carkits, Nokia went and changed the supported bluetooth profiles. Funny, I would have thought the newer the model, the more it would have done, but I guess not! Glad I looked into this as I was thinking about 'upgrading' to the 810 for the full handset, guess I won't be now!
I am getting confused, I downloaded the jetstream program to the phone and was able to download the contact list no problem. The problem i am having is when i make a call from the nokia bluetooth when I am done and hit the endcall button on the nokia it does not end the call, I have to pull out the phone and hit the end button on the phone itself. any suggestions on how to correct this.
BOBBYDS1 said:
I am getting confused,
Click to expand...
Click to collapse
Not as much as everyone else reading your post and trying to help!
BOBBYDS1 said:
AM HAVING TROUBLE DOWNLOADING MY CONTACTS
Click to expand...
Click to collapse
BOBBYDS1 said:
ANY ONE HAVE ANY TROUBLE DOWNLOADING THERE CONTACT LIST
Click to expand...
Click to collapse
BOBBYDS1 said:
I TRIED USING AN APPLICATION CALLED JETWARE WHICH WILL ALLOW ME TO DOWNLOAD BUT WHEN I MAKE A CALL IT WONT ALLOW ME TO HANG-UP THE CALL.
Click to expand...
Click to collapse
BOBBYDS1 said:
removing the jetware the bluetooth works fine but cant download contacts
Click to expand...
Click to collapse
So downloading contacts isn't your problem, hanging up whilst having jetware installed is? Better post would have been something along the lines of:
"I'm having trouble ending calls on my Kaiser using the end button on my Nokia CK-15 carkit. I installed the Jetware program to enable downloading contacts, but this stops the end key working on the Kaiser, before this it was working fine just the carkit couldn't download contacts. Does anyone know of any settings in Jetware I can try, that would restore the end key function, or other software that would still enable me to download contacts and have and end key?" - That might have got you an answer sooner...
Right, the phone as it comes doesn't support phonebook access, thus you won't be able to download your contacts. Actually, none of the Nokia bluetooth carkits support downloading contacts from the internal memory of a Windows Mobile device, probably because no Nokia uses Windows Mobile (yet).
You add something like Jetware which gives you the ability to access the phonebook, but then you are unable to end a call via the carkit. My best guess is Jetware does something which interupts the commands from the carkit. I'm also guessing your stuck with either having contacts download or and end call option. Add Jetware back and play with it's settings. You may get lucky. However bluetooth is very buggy and the only way to get 2 devices to work perfectly with eachother without running the risk of having to fiddle or loose something is to buy them from the same manufacturer and check they are fully compatible with eachother. Two devices from 2 manufacturers don't always work.
Here are some examples:
Old Ericsson headset, will work perfectly with my old HTC phone and can't even be seen by my Kaiser. Slightly newer one (that has an LCD for caller ID) will work once connected until I switch it off, then requires the old HTC phone to be soft reset before it will connect again. Works perfectly with the Kaiser. Brand new, cheapy Motorola headset does what it feels like with no consistency on my older HTC, again works perfectly on the Kaiser. My Nokia 610 carkit will connect to both phones, but whilst the older phone needs to be soft reset before turning off the ignition (otherwise the phone part of things crashes), the Kaiser will connect and disconnect just as Nokia intend. The carkit will only download SIM contacts. The fix posted above isn't really a fix, it's fooling the carkit into thinking that another phone (the Nokia N95) is the kaiser, downloading the contacts from it and then reconnecting the real Kaiser. Not a fix, but a brilliant workaround.
Also noticed that the CK-15 uses bluetooth version 1.2, the Kaiser bluetooth version 2. This might be something to do with it.
In short, I think you will have to live with either a phonebook, or an end function. Welcome to the wonderful world of bluetooth. It also doesn't help that Nokia hasa a history of making devices which don't work with anything other than another Nokia device...
Is there any way to change the kaiser to use bluetooth 1.2. Also is there a way to contact jetware besides email as they dont reply.
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
BOBBYDS1 said:
Is there any way to change the kaiser to use bluetooth 1.2
Click to expand...
Click to collapse
I seriously doubt anyone will be writing a bluetooth stack v1.2 for the Kaiser anytime soon. I also have a feeling that the versions are hardware, not software related, so its impossible. I think you may have to accept that the Kaiser and Nokia will never play nicely. Why don't you install Jetware, sync your contacts, then either disable it (I'm sure I remember an option in the settings when I tried it previously) or just delete the program? You could keep the installer cab on your device somewhere as its only 500kb for when you need to reinstall it?
If there isn't a phone number on the jetware homepage, I'm betting you can't call them. But I did notice there is an advanced set-up options menu. Did you try unchecking all the boxes apart from phonebooks? If the "hang-up/swap to incomming call" option is unchecked, Jetware should pass that command to the phones standard bluetooth software and give you back your end key. From the Jetware site:
"When this option is unchecked the Extension will allow hang up commands to be processed by the built-in code, which will disconnect all active voice calls."
If it's currently checked, try unchecking it.
BOBBYDS1 said:
In your reply you state thAT Nokia devices csnt download from internal memory of kaiser phone, how can i set it up to download from the sim is there a way.
Click to expand...
Click to collapse
Have you read the manual? In my 610 manual, it tells me I can choose to dowload phone, SIM, or phone and SIM memory. Does yours?
Now it seems that call waiting is not working in the bluetooth unit, itried the settings both ways in jetware but still no go. any ideas
Steve-C said:
Still not clear if your carkit is using headset or rSAP profiles. Can you either tell us the model of the carkit, or tell us if you can browse the internet from the phone whilst its connected to the carkit?
Punctuation good enough there Dark?! (JOKE!!)
Click to expand...
Click to collapse
Well, since you asked, it should be 'it's', not 'its'.

Why can't I hear my Bluetooth a2dp headphones?

I can't get my XV6800 to send sound to my new HP GW470AA stereo noise-reducing headphones. This is my first experience with BlueTooth. I made sure the phone was fully charged, then used the HP setup procedure, in which I temporarily turned ON the phone's pairing switch. The phone shows up in the list of recognized Bluetooth devices, where it is told to provide stereo sound. I've turned BlueTooth ON in both devices, as verified by the blue flashing LED on each. But sound continues to come through the 6800's built-in speaker. What have I overlooked? Is there a setting somewhere that tells the 6800 "Don't automatically switch sound to a Bluetooth device"? If so, where?
Is there a port setting I'm to set somewhere? No ports show up in the BlueTooth field that lists ports.
For what it's worth, I may have messed up during installation by specifying a short password when asked if I wanted to do so. I tried to repeat the install-and-pair process, to no avail. I can't seem to get the phone to forget the original pairing.
The phone works when connected via USB.
Help!
First, undo everything that you did to get back to square one.
Please realize that I don't know how your HP Stereo Bluetooth Headphones get put into pairing mode, but connection of a Bluetooth headset to a phone is initiated on the phone.
Go into Settings and select the "Connections" tab.
Tap on the Bluetooth icon and then go to the "Mode" tab
Tick the box that reads, "Turn on Bluetooth."
Now, go to the devices tab, put your headset/headphones into pairing mode, and tick on "Add new device..."
When you see your Bluetooth device show up, select it. You will be asked for a password.
The standard Bluetooth pairing password is simply four zeros (0000).
Select Connect and you should be done.
Good luck!
Rob Smith
I tried to follow your advice, Rob, but I had no luck:
rasmith3530 said:
First, undo everything that you did to get back to square one.
Click to expand...
Click to collapse
How? I couldn't find anywhere where I could delete or undo the "HP headphones" that I had already "paired" (or thought I had paired).
Please realize that I don't know how your HP Stereo Bluetooth Headphones get put into pairing mode, but connection of a Bluetooth headset to a phone is initiated on the phone.
Click to expand...
Click to collapse
The instructions cover pairing with Windows XP and Vista...but not with a portable device!
Go into Settings and select the "Connections" tab.
Tap on the Bluetooth icon and then go to the "Mode" tab
Tick the box that reads, "Turn on Bluetooth."
Click to expand...
Click to collapse
Shouldn't I also select, "Make this device visible to other devices"? I did so.
Now, go to the devices tab, put your headset/headphones into pairing mode,
Click to expand...
Click to collapse
On my phones, that means that not only must the Bluetooth switch be turned ON, but a second switch, too, used just for pairing. When I turn on the second switch, the phones' bluetooth LED flashes more quickly.
and tick on "Add new device..."
When you see your Bluetooth device show up, select it. You will be asked for a password.
Click to expand...
Click to collapse
Nothing new shows up; just the pre-existing "HP headphone," the name I had given it.
The standard BlueTooth pairing password is simply four zeros (0000).
Click to expand...
Click to collapse
Unbelievable. How are 99 percent of users supposed to know this? I don't recall whether I was prompted for this the first time around. If I was, and put in nothing or something else (1234), what I be seeing "HP headphones" in the list of available devices? If I wasn't, does this suggest I never got far enough?
Select Connect and you should be done.
Click to expand...
Click to collapse
I've never seen the Connect option.
My best hope, it seems, would be to undo my first attemptl. But how?
1. Go into Bluetooth Connections in Settings, select your device by holding down the stylus on its name. A menu will pop up, and one of the choices will be "Delete." Select that one!
2. Although I cannot guarantee it, I am guessing that pairing your HP Bluetooth headphones to the phone is pretty much like pairing any Bluetooth headset with a phone. Of course, the thing that makes me curious is why you want to pair "headphones" to a phone rather than a "headset?" For a phone, you'd probably be better off with something like Motorola's HT820 that allow you to not only listen to audio files, but also allow communication, which is after all, the main reason for having a "phone!"
3. No, you do not need to make the device visible to other devices. That setting is for when you want to pair your device with a computer to perform a Bluetooth ActiveSync.
4. Yeah, you'll want to crank on both switches to put your headphones into pairing mode. The phone's LED flashes more quickly because it is "seeing" the headphones.
5. See item number 1 above. It should not be in the list anymore. You should only see "Add new device..." unless you have previously paired other devices. In my list, in addition to "Add..." I see Motorola HT820 and Motorola H12, the two headsets that I have paired. You might see something similar.
6. The pairing code is generally written in the instruction sheet that comes with your Bluetooth accessory. As I stated, it is generally four zeros, but that doesn't prevent a manufacturer from using something different, so check the documentation that came with your device.
7. As I said, undo by following what I wrote in item 1 above.
Good Luck!
Rob
Rob,
Thanks again. I was able to delete the existing instance, using your instructions. I was prompted for the passcode, and entered 0000, the passcode for Vista. This password turned out to be incorrect, so I'll go hunt down the directions for XP; I recall that it differed.
It works!!! Can't thank you enough.
Glad I could help.

Odd request but new to windows mobile.. plz help.

Greetings,
I'm a new member to this community and i have been able to find all the answers i need in regard to my new phone here. I've learned how to remove as many of AT&T's "IMPROVEMENTS" as i could possibly remove. I'm not happy with the way it looks but that's ok. it works.
The question I have is this. My phone does everything for me now including email, gps, internet, internet for my laptop, play movies, play music. I'm curious about what else it can do. I've seen applications that just use the flash on the camera as a flashlight and it can be bound to the PTT button.
Is there an application that will be able to interface with my computer and route the sound through the external speaker on my phone for those ocassions that i lan and forget my speakers.
I don't believe there is the ability to rerout sound. That seems like it would take some crazy drivers...
Anyways I don't know of any program.
If your new to the community you may want to look at getting a new ROM. That may help remove the AT&T bloatware and make your device look better and perform much better. There are guides in the ROM development section to flashing your first ROM.
You can do this through bluetooth create a bluetooth partnership then under the bluetooth devices you will see your laptop select and hold on it and it should give you the option to set as wirless stero
Good luck!!

Categories

Resources