Related
Hi All!
I'm newbie here. Please, don't beat me for my question .
I've got Qtek 9100, and now want to play with ROM. BUT! I read a lot of here, and haven't found the Full ROM Backup programm. Is it possible? Or, the only way to backup my original ROM partly, using aWizard?
Thanks for any help.
The aWizard tools do Backup all of the rom except bootloader.
BUT: The ExtROM is backuped in single files which is a problem when you want to insert the ExtROM back into the Wizard: because with the newer ROMs (1.6.x) the ExtROM can only be made visible (and stays read-only).
full rom backup
addr You can backup full ROM to SD card, and then to your PC.
Click my signature to get the tool.
Ah, great!
That's the very thing i was looking for!
Thanks Button!
addr said:
... i can't upload my ROM to SD Card, after entering r2sd all i got:
Cmd>r2sd all
***** user area size = 0x1E980000 Bytes
R2SDBackup() - Download type = 6
usTotalBlock = 1 sizeof(SDCARD_SIGNATRUE_TABLE)=512
You didn't get the proper security level to download a specific image
Click to expand...
Click to collapse
Sorry, it was a bug in my command file, so CID-unlocking was failed.
Now everything works fine. Please, re-download the tool (click my signature).
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
lanerebel said:
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
Click to expand...
Click to collapse
the data backup in your mini-sd-card is not FAT compliant. but it's OK for restoring using Qtek's rom-flash procedure.
in another way, you can use tools like WinHex to view,edit or save your mini-SD to a PC as a raw binary file.
lanerebel said:
I tried using your backup for my ROM, because I was going to upgrade. I'm definitely a newbie at ROM upgrading and backing up...
After running the backup utility, my Qtek won't see my mini-sd card anymore. Do you know how I can make it see my card again? Did the process reformat my card or is there another problem?
Thanks!
Joe
Click to expand...
Click to collapse
If you have already saved your ROM image to PC (myrom.bin file), you can format SD card, and use it as always.
Um, I have a noobie question as well...
Will a full ROM backup take a backup up of everything installed after being shipped from the manufacturer, i.e. programs, reg settings etc., or will it only backup the basic ROM and extended ROM, i.e. what you're left with when you hard reset your device?
the_invisigoth Yes, only ROM, not installed apps.
Hi Button,
Does your program backup the whole ROM (ie OS + Extended) or just the OS??
Is there a way to backup the OS only so that I can backup the latest Qtek OS part only. Reload my T-mobile extended ROM then restore the Qtek OS only ROM, giving me the latest OS with my T-mobile customisation??
Cheers
John
odyseus said:
Hi Button,
Does your program backup the whole ROM (ie OS + Extended) or just the OS??
John
Click to expand...
Click to collapse
It backups Full ROM = OS+ExR+Radio+SPL/IPL+Splash..
Use aWizard to backup your ROM partly.
I needed Button's program before I updated to 2.8.7. I have a cingular 8125 I upgraded to 2.8.7 it overwrote my extended ROM, when I flashed everything back from awizard I relaized my extended ROM was not restored, so I flashed to 1.5.4 so I could access the extended ROM, but it downgraded my IPL and SPL to 1.?? from 2.??. So once I restored my extended ROM in 1.5.4 I upgraded just the OS to 1.8.11 from my original backup, and now when I do a hardreset it locks up during extended ROM installation. Unless I can find a way to edit the extended ROM on 2.8.7 I wont be able to restore my unit to original specs. Unless someone uses Buttons program on a Cingular 8125 and uploads it somewhere for me. I am gonna return this unit to frys and purchase it at the cingular store for a bit cheaper price. So I was hoping to restore it to orignal specs so the next helpless frys customer dosent get stuck wth a funky unit. Thanks all!
@Button,
would this method allow me to replace my 8125 to its original state including the bootloader flash screen ? i am needing to put my 8125 to its original state prior to returning.
I have a new 8125 that i could take a backup of and want to load it onto the one that i am returning. would this work ? thank you
Yes it should work.
Button,
does your program also perform restoral of ROM and all its content from the backup it's made ?
thanks for your help.
FarSeide said:
Button,
does your program also perform restoral of ROM and all its content from the backup it's made ?
thanks for your help.
Click to expand...
Click to collapse
It can backup only 'clear' ROM, without programms that you have installed manually.
THANK YOU BUTTON !!!!
I was able to FULLY RESTORE my Cingular 8125 to its OEM Spec including the first boot splash screen !!!!!!!!!
THANK YOU !!!!!!!!!!!
I spoke too soon.
Here's what happens...
After 8125 has been booted up, on the screen it says, "Data Crashes. Please contact your service Provider". And if you see on the top left corner, it says SIM LOCK. It will not let me reload the image again from the SD card from the bootloader. When I press the Voice Dial, it says, No Update Allow!.
I've tried to run the aWizard and Lokitz tool to unlock again but to no avail.
Have you seen thsi before ?
First, try to flash an old rom (from bootloader mode), - run any ruu. Then, unlock SIM and CID, if it is need. And then use SD card to restore your original rom.
Hey Guys....
I am still working on this DIY but this is how I was able to accomplish reverting back to my OEM Cingular 8125 state.
If someone could plase let me know how to replace the very first SPLASH Screen from "HTC" to CINGULAR, I would greatly appreciate it.
By following the steps below, you will have almost everything back to its original state.
Be sure to download all the necessary ROM files: OS ROM, Radio ROM, splash.bin
Place your OS ROM and Radio ROM inside the c:\sWizard\ROM folder.
DOWNGRADE YOUR OS AND RADIO ROM
1. Download aWizard 1.3b Beta Version (Attached File or Latest Version) from the following link: http://forum.xda-developers.com/viewtopic.php?t=37386&highlight=awizard
2. Unzip the folder to your root directory (C:\aWizard or D:\aWizard). You need to avoid having spaces your directory name. This is the reason placing folder in the root.
3. Make sure you have an active connection via Active Sync.
4. Run the aWizard.cmd file from C:\aWizard
5. Run "e" command FIRST !
6. Run "u" command. Your Wizard will reboot.
7. Run "w" command to update your ROM. You will get a prompt to choose your ROM. If you did not place a valid ROM inside the ROM folder, then you wont see it from this list. Also, if you placed your aWizard in other directory with spaces (i.e C:\ MY DOCUMENT) then you wont see it either. Just let it run. It will take close to 20 minutes. At the end, it will as you to hard reset.
8. Run "r" command to update your Radio ROM. Same as Step 7.
Replacing Splash Screen (Back to Cingular)
1. Place the splash.bin file inside the c:\aWizard\lib
2. Open up CMD and navigate to c:\aWizard\lib
3. Type in the following command "pdocwrite.exe -n 1 splash.bin 0x002d0000"
pdocwrite.exe = this program is located inside the LIB folder
splash.bin is a file that I converted.
4. Once completed, please reset your Wizard and now you will have Cingular's Splash (2nd Splash)
Updating the EXT ROM
1. I did this manually by utilizing Active Sync to copy over all the Cingular ROMs to the Wizard and running it individually.
2. Reset and you will now have all the programs Wizard came with.
FAQ
Q. My Wizard is stuck on a splash screen and it wont do anything.
1. Hard reset your Wizard
2. Hold onto Camera Button while turning on the Wizard and you will get the boot screen.
3. Plug in your USB Cable
4. Run one of the known ROM files with .exe extention. When this happened to me while downgrading,
I had to reload the latest iMate ROM.
5. Start the downgrade process again by following the above instruction.
reverting back to original cingular rom
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js
Re: reverting back to original cingular rom
urologyhealth said:
Thank you for this.
Don't you have to REINSTALL original Cingular Rom or does this do that by removing imate updated ROM?
js
Click to expand...
Click to collapse
When you install Cingular ROM, it will remove/overwrite the existing iMate ROM.
Be sure to place your ROM files in the the ROM folder.
If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.
jvanbrecht said:
If your running the aku2 imate rom, many people will have problems running awizard or lokiwiz to unlock the CID, I had to run the tmo uk rom update (.exe one) which replaced the imate, and then restore the rom files I had backed up for cingular, although the extended rom is still locked, thats annoying.
Click to expand...
Click to collapse
can you please share how you change the very first splash screen on your 8125 ? its the only thing i wasnt able to do or know how to do.
thanks
FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.
kingbear2 said:
FarSeide, I'm pretty sure that even the stock 8125's from Cingular showed the HTC screen first, the cingular screen second, and finally the Windows Mobile screen. If that's the case, then your 8125 is as good as new as far as Cingular is concerned.
Also, if anyone upgraded to the AKU2 I-mate ROM, you cannot do the process you described, because (as someone else mentioned) the lokiwiz program will not work. What you need to do is FIRST install a different ROM using an exe file (a good example would be the leaked AKU2 Q-Tek ROM exe file), and only after that entire upgrade process is completed, can you now use lokiwiz to unlock the SuperCID and install the Cingular ROM.
Click to expand...
Click to collapse
Eli,
thank you for the info. I wanted to put this together because when I tired to do this, there were information but scattered all over all forums. just wanted to help others so that they dont go through the same thing i did.
i was following these instructions and i got a
NOTIFICATION ERROR
cannot execute repllog.exe
so what i had to do was hard reset, boot screen , re-installed imate, ...
i guess i will try it again, what do you guys think
hmmm... sorry to say but my 8125 only ever showed the cingular splash. No HTC, no WinMob. I had assumed that Cingular somehow replaced all 3 splash screen with theirs.... In fact, I never even knew there was more than one splash screen until I upgraded to the Qtek rom.
I'm in trouble
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!
Re: I'm in trouble
hellomoto_25 said:
I tried to downgrade the ROM and now I'm hung in the i-Mate SPLASH SCREEN. I tried the hard reset and it hangs every time. I can't get a connection through active sync obviously so what are my options. How can I get a working device.
I'm freaking out.
Please HELP!!!!!!!!!!!!!
Click to expand...
Click to collapse
relax... i was exactly where you were...
first, hard reset your device.
Hold the Com Manager, Voice Command and press the soft reset with your stylus.
before you turn the device back on, hold the camera button then turn on the power. you will receive the boot screen. Plug in your USB Cable and kick off the EXE file. Load one of the known ROMS like the iMate ROM.
reload and try again. I am willing to bet that you disconnected the USB Cable while updating to Cingular ROM.
Good luck and dont worry.
does anyone have the exe for the original Cingular ROM ?
my colleague tried to update his 8125 with my imate rom.....and did not unlock it first.
all he has is the bootloader now, the update gives the well known Error: Invalid Vender ID
Any help is greatly appreciated
Thanks !!
Get a copy of the proper ROM on a SD card, and reload it that way.
This is the easiest way out of that box......
Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?
dirty_harry said:
Thanks,
but how to get the Rom reloaded from the SD card onto the device using the bootloader ?
Click to expand...
Click to collapse
THAT part is easy.
Note that the SD card image is NOT a file. You have to raw write it onto the card, which will destroy the filesystem - so back up the card first! psdwrite will do the job. You also need the image (PREVIOUSLY copied from a SD-made backup with "psdREAD")
To restore it, insert the card, hold the CAMERA button, and power on. The phone will tell you to press VOICE to restore the SD image (it looks to see if there's a valid one in there)
Note that with 1.x bootloaders this will happen with the BACKLIGHT OFF, and you only have 3 seconds or so to press the key - so have a flashlight handy. 2.x bootloaders turn the backlight ON.
Hit VOICE. The image will be verified (checksummed) and if it is good, it will be loaded.
That's it. Takes about 2-3 minutes. When it finishes it will tell you to press any key, and when you do you'll end up at the tricolor screen.
Power off and back on, and the phone will cold boot the new image.
This will work even if you can't run an RUU loader, so long as you can get that first prompt up. It is a VERY effective rescue method.
IMHO before you hack on the firmware in these things you should make an SD card backup just for this reason.
Which tools is best option for ROM backup to Mini SD?
Hi,
Just read your message about writing ROM to Mini SD card.
I'd like to do just that.
I want one or two ROM's for safekeeping stored somewhere instead only a backup or official copy on my pc.
As i've read restoring from SD is safer and faster..
I don't intend to use the SD card for anything more than just that.
In the Prodigy Service Manual (Prodigy Service Manual -XA(0813-2005).pdf) HTC uses mtty.exe. There are also instructions in the PDF.
Since HTC uses this, it should do exactly what i want, i guess?
Or is there a better tool?
Thanks,
Allegro.
P.S: Will a restored ROM from Mini-SD look fresh to HTC?
Or will they see it's a self restored copy instead of a official HTC restore?
Will it reset "everything"?
I was able to fully restore CIngular 8125 ROM, EXTROM, All Splash Images using the SD Restore.
100 Cingular OEM Spec has been restored...
I hv updated T Mo custom ROM..but now can't downgrade even by Awizard utils....can any one throw some light on this?
Hi,
Can I install a new ROM via my SD card because I cannot connect to Active Sync? I've been searching for hours but still can't fix my problem.
I tried to upgrade the radio rom only, but after that there is no radio version, no phone or internet, system on MDA is VERY slow, and I can't connect to active sync.
I can get bootloader up, but I cannot install the stock rom I downloaded from this site, because i can't connect with active sync. I've tried to copy it to an SD card and install from there, but that doesn't work either. In bootloader I do not have USB at bottom left on my screen.
only
IPL 1.03
SPL 1.03
Any help would be MUCH appreciated.
Thanks in advance!!!!!
I have the same problem :-(
It would be very nice if there´s a solution for this problem
Thanks a lot
Daniel
You don't need activesynce
You just need to get into bootloader search for it then run the RUU.
kyphur said:
You don't need activesynce
You just need to get into bootloader search for it then run the RUU.
Click to expand...
Click to collapse
If USB is not showing up in the bootloader (rainbow screen) then the only known way to backup is via SD card. The RUU cannot be used in this case.
You'll want to dig out the original backup that you made when you first got the phone and do a restore boot. Restore the image from the SD card.
If you want the improved radio ROM, I'd suggest restoring from SD card, CID unlocking the device, upgrading to an AKU 2.x ROM (so you've got a 2.x bootloader) and then applying the 2.x radio ROM upgrade.
sd card
Check this
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=151
I installed a back up rom on my SD card with another phone of a friend of myne
same problem; wizard_radio version-2.25.11
will follow link in above post and see hoe it goes; anyone got any other comments?
no SD backup
well, funnily enough I ran the ROM backup as a precaution, but it seems a. not to have worked and b. to have wiped my SD card, so am buggered whichever way you look at it.
Does anyone have a backup image they could email/FTP to me so I can at least get to USB in bootloader?
THanks,
Jolyon
the CURE
ok, thanks to the tip from a99tandem.
Reset, holding down the camera button, allows you to go into boatloader, and you can flash a ROM from the PC using RUU. Bootloader comes up with 'USB' in the corner.
Thank god for that; that's 5 hours wasted...
I’ve been trying for weeks without success to upgrade from WM 5 to 6.1 on the Treo 750. I’ve used Herm Unlock v3, Magic Unlocker & CheetahUnlocker they all run ok, I’m pretty sure the device is unlocked! I’ve used 3 different sources to DL the ROM copied to SD card which is FAT32, CHEEIMG.nbh resides at the root. + Reset + left button.
Rainbow screen appears
CHEE100
IPL-0.20
CHEE100
SPL-1.40.01iNex
And that is as far as It gets!!!! it just sits there and does nothing.
I’m following every steps to the letter but still it doesn’t succeed, the only thing I can think of through reading all the threads is that the SW & Firmware version on the actual device seem to be different compared to everyone else’s, if I navigate to settings/About/phone I see the following:
Software version
Palm Build 272
HTC Version 1.01
Hardware version
P1
Serial Number:
***********
Phone Number:
***********
Firmware Version
1.16.00.00
IMEI
***********
SA Number
Unknown
Software & Firmware Version, seem to be different on this device, is there any method for upgrading this?
I have not tried the GUI version of the upgrade utility (if anyone has a DL link, I will attempt that too)
All advice very welcome
Is the storage card fat32? It has to be...
Is the storage card fat32? If you did not format it, then it is not. It comes by default as FAT16. You must format it as FAT32, then copy the ROM file to the drive. If not, it will just sit there, like you describe.
Hi a011528:
I feel your pain! I've been trying to get my Treo 750 unlocked for weeks! I finally did it!
If the boot loader is any indication, it looks like you have successfully unlocked your phone. The boot loader screen (which you can see if you press and hold the bottom button on the left side of your phone, while pressing reset to the right of the SD card socket) does display what it should:
CHE100
IPL-0.20
CHEE100
SPL-1.40.Olinex
At this point, once that screen is displayed, it will stay displayed until you press reset again.
Now, as for the Software/Firmware versions, I'm thinking that those will depend on the carrier that the phone originated from, or would be different if it originally came unlocked from Palm. For instance, my Cingular phone displays this:
Software Version: TREO750-1.13-CNG
Firmware Version 1.16.00.00
What brand/carrier is your phone? Can you use a different SIM from a different carrier? If so, then the phone is unlocked.
Now, as I understand it, Unlocking the phone is different from Upgrading Windows from 5.0 to 6.0/6.1! For example, I have, so far, only unlocked my phone. So I still have Windows 5.0!
Unless I'm totally wrong here, you're trying to upgrade to Windows, but all you've done so far is unlock the phone.
I believe it must be unlocked in order to use any of the Windows upgrades that are not "official" for your particular type of phone. As I understand it, ATT/Cingular did release an "official" Windows 6.0 upgrade.
But the carrier for your phone may not have released an official upgrade, so you'll need to use one of the ones found here: http://forum.xda-developers.com/showthread.php?t=335402
Bear in mind that I'm only a few days ahead of you in this process, and I'm by no means anyone you should listen to!! But I've just successfully gotten through the unlock, so I can at least help a little with that!
Would anyone care to jump in here and let me know how much, if anything, I've said in this post is correct!!
you can always flash with usb cable through activesync. thats how i flash my treo and tilt. download a kaiser custom ruu. unzip it if zipped. should look like a mini tilt. put into a seperate folder the ruu and the rom file. rename the rom file before starting to RUU_signed.nbh then run the ruu. follow the instructions on the screen. thats all. very important to make sure activesync is synced before starting. also dont run any other programs or browse the web while flashing cause it can cause a bad flash and dont let the computer go into stand by or hybernate while flashing.
OK. Decided to upload a new ROM as my phone was getting slow and unusable.
It's an O2 XDA (Touch Diamond) with:
Touchflo v3 Build 29946
ROM 1.93.206.6 WWE
09/08/08
Radio 1.00.25.05
Protocol 52.29.25.12H
Boot R1.00.25.05
I downloaded Olinex's unsigned developer Hard SPL and I extracted the NBH file and renamed it DIAMIMG.NBH following the advice here:
http://forum.xda-developers.com/showpost.php?p=2707841&postcount=4035
On soft reset I pushed the vol down and back buttons to get the boot loader stripes, then let go.
I now have a screen which says "Loading..." and has done for 20 minutes. I have now got the phone on charge while I wait for some help to see what to do next, just in case this is a critical stage - don't want to brick it.
Reading through again I am concerned that this was a procedure for rom upgrade not Hard SPL install, can someone tell me please?
Thanks in advance for any help.
Well, I ended up taking the battery off to get it to reboot. It seems to boot fine back into the old ROM.
I still intend to upgrade it (to SwiftBL's v7.5) but have a few questions:
1. Can the HardSPL be run from the internal storage card? If so is it simply running the exe from the unpacked zip from within a folder? ActiveSync is a bit too flaky for me.
2. Do I need the SIM card in the phone at any stage of the ROM upgrade?
3. On the original ROM I get a drop down menu to setup the phone to the UK O2 network settings. If I load a new ROM, will I need to know these settings?
Cheers
1. HardSPL cannot be run from storage. Only Activesync or Bootloader
2. No. You can flash without SIM card
3. You can use connection setup on any new ROM. Usually starts straight after initial setup.
OK here's where I'm at now.
Downloaded jockyw2001's HardSPL 1.24
Ran it and it got as far as prompting me to run on the phone. I said 'Yes' and the HTC screen went black as expected.
Next stage was to run the DiamondCustomRUU.exe file which I did but this is waiting for ActiveSync. ActiveSync will not sync with the phone now, I guess because the phone is not 'on'?
Where do I go from here?
Use the Hard-SPL in my sig with your RUU.
Thanks, will do (it's not the one mentioned in the ROM author's description though).
So how do I recover the phone from the black screen now? Is it safe to remove the battery to reset?
Battery pulled after reading this post:
http://forum.xda-developers.com/archive/index.php/t-427945.html
I'll try the SPL you mentioned now.....
Had a good search but can't find out. This Olinex zip contains just one file RUU_Signed.nbh.
Where do I get the other files from to run this?
use the attached . It has the RUU exe and the nbh.
Thanks. This is a signed version I see, was going to use SwiftBL's ROM which requires unsigned.
May take a look at other roms that use signed unless you think that I can load the SwiftBL rom with this version?