hi!
after unlocking and upgrading my SPV M3000 (Qtek 9100), the camera stopped working and was freezing the PPC. only soft reset made the PPC usable. I have tried to hard reset and then changed some versions of software. finally, I have installed SUMMITER's custom AKU 2.3 rom. it says now:
OS 5.1.195 (Build 14955.2.3.0)
ROM 2.24.10.1 WWE
ROM Date 4/17/06
Radio 02.25.11
Protocol 4.1.13.12
the camera started working, but somehow wiered. it is blinking, the image is all the time moving/jumping, it is of poor quality, and the final outcome looks like in the picture below.
any idea what might help?
thanks!
Did you allow the Cingular Operator Customizations to install?
I know there is atleast on Cab file in there that 'adjusts' camera settings.
If you did then I would try a hard reset, then a soft reset when you see the message about customizing your device in 3 seconds.
Then try the camera and see if it is working differently.
Also, you could try installing the unmodified T-Mobile AKU 2.3 Rom (which Summiter's version is based on) to see if the problem is with Mods Summiter made to the OS.
As a last resort, install the latest official release from your device provider and see if the problem presists.
Related
Dopod 838 Rom Code (2006/04/19)
ROM version: 2.21.13.1 WWE
ROM date: 03/09/06
Radio Version: 02.19.11
Protocol Version: 4.1.13.09
ExtROM version: 2.21.13.102
Updates:
1) Provides client-side support for Microsoft DirectPush (push mail).
2) Improved Comm Manager interface for 1-click DirectPush on/off and data connection detach.
Installation Guide:
*IMPORTANT! - please read these instructions carefully before updating your device
1. Download the .zip file and extract the .exe file within.
2. Ensure latest version of Activesync v4.xx is installed on PC/laptop.
3. Connect Dopod 838 to PC/laptop.
4. VERY IMPORTANT! - Ensure the Dopod 838 is connected properly to the PC/laptop.
5. Make sure the battery is charged to at least 50%.
6. Double-click on the .exe file to run the update utility
7. VERY IMPORTANT! - All data and software previously installed will be lost after the update. Please backup the data first.
8. Please close all programs when running the update utility.
9. VERY IMPORTANT! - Do not unplug the device when the update process is running, doing so may damage the device.
10. After updating, the device will reboot, this is normal.
Download here:
http://www.dopodasia.com/download/RUU_Wizard_2211301_22113102_021911_DOP_ASIA_WWE_Ship.exe
which languages are supported? is a2dp included?
works good on my MDA Vario
has anyone flashed this ROM or can anyone post the EXTROM? wondering what autoconfig setting has this ROM got...
no change between the 2.17 and 2.21
i upgraded my 8125 cinguler to the new 2..21 dopod i didnt install the extened rom because i running tmobile on mine its faster clean no headeach or reset so far slow on boot up maybe 60 to 65 second on boot up other than that i really didnt find any defference betwen the 2 rom if u happy with 2.17 theres no reson to upgrade
I am uploading this package to the Wizard FTP now.
folder:
/Wizard/Roms/Dopod
Can anyone post the version details (ie. build, os version, radio version)
Seem nothing new.kinda I-must-catch-up ROM...
can we get confirmation that it's English? and also, what is included in the Rom? Push mail? BT stereo, etc.. any custumizations, etc..
So Im guessing its not worth it to upgrade from 2.17 then
Hmm, can anyone else confirm that it's English and confirm that it will work on their Qtek 9100? What else is included in this rom?
yes its english
yes guys its in english
jok3sta said:
So Im guessing its not worth it to upgrade from 2.17 then
Click to expand...
Click to collapse
Nope.. it's the same as 2.17 as far as core OS and radio goes. Only difference I see is the customizations.
I don't expect we'll see a different core OS in a ROM until/unless MS releases an AKU 3 or some other packaged-up set of bugfixes.
Most carriers are super reluctant to release ROM upgrades because of the risks of increased support costs for Upgrades Gone Wild(tm). (meaning bad flashes, bricked devices etc)
Just flash it today from 217 to 221. I can feel my 8125 can get better camera quality, and connect to the WIFI faster than b4 after upgrade it. Everything else are the same.
Well radio rom version seems to be different 2.19?
So ive got the imate 2.16.9.1 WWE
i can install this one and just soft reset before the extended rom loads and be ok?
is the .17 better then the .16 ive got btw?
btw im running this rom on an 8125. i DONT think its CID unlocked. any way to check?
i don't know why, but i seem to be having problems connecting to the internet through either wifi or ActiveSync. Pocket IE returns blank pages for any page i access. Is anyone having the same problem with this ROM?
so any other news about this rom? it hasnt recieved much feedback
This one works flawlessly on my Dopod 838/T-Mobile network, so far
Can anyone confirm that upgrading to this Dopod rom from QTEK ROM RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe is okay ? The Device is Dopod 838 btw
its ok its been really buggy, but the new voicecamander is better. but its real buggy and maybee not quite as fast
I have unlocked a Orange SPV M3000, and after few shots the camera stopped working, freezing the screen. Only soft reset turned alive the device. I have tried hard reset, I have tried other ROMs - no result. After installing the T-Mobile UK AKU 2.3, the camera started to work, but the image is constantly moving, and the quality of the picture is low. Tried the different patches that are on this forum, the result is the same. Everything else is working fine.
I'll appreciate any suggestions,
Thanks
SPV M3000
OS 5.1.195 Build 14955.2.3.0
ROM 2.24.10.1WWE
Date 4/17/06
Radio 02.25.11
Protocol 4.1.13.12
ExtROM 2.25.11.102
i have the same problem
Hi,
I upgraded a Cingular SX66 unit using maupgradeut_noid and the latest AKU 3.5.2 WM5 ROM. Afterward, I had no radio ROM so I updated to the 1.15.00 release. However, my phone is still unable to make/receive calls or data (with multiple good SIMs.) It appears the radio ROM is having issues with this WM5 package because sometimes on hard restarts the boot screen lists R: and G: as NONE, but after a soft reboot they usually show the correct versions.
I searched and can't find any postings about this type of behavior. Nothing useful to report from the phone other than it says "phone is not ready" and "no service" with a good SIM.
I have several of these PDAs that I want to distribute to my internal staff with WM5 so they don't have to learn WM2003 (all of our other devices are WM5 or WM6.) Any recommendations on a procedure to test the radio ROM or a different combination of OS and radio ROMs?
Thanks for the help.
PS. running getdevicedata.exe yields the following:
PH20B1 WWE A %CID? 5.35.05. 1.15.00 % 4
downgrade to wm2003 and try to flash again radio 1.15 and post the results
sandimashsfootballrules said:
Hi,
I upgraded a Cingular SX66 unit using maupgradeut_noid and the latest AKU 3.5.2 WM5 ROM. Afterward, I had no radio ROM so I updated to the 1.15.00 release. However, my phone is still unable to make/receive calls or data (with multiple good SIMs.) It appears the radio ROM is having issues with this WM5 package because sometimes on hard restarts the boot screen lists R: and G: as NONE, but after a soft reboot they usually show the correct versions.
I searched and can't find any postings about this type of behavior. Nothing useful to report from the phone other than it says "phone is not ready" and "no service" with a good SIM.
I have several of these PDAs that I want to distribute to my internal staff with WM5 so they don't have to learn WM2003 (all of our other devices are WM5 or WM6.) Any recommendations on a procedure to test the radio ROM or a different combination of OS and radio ROMs?
Thanks for the help.
PS. running getdevicedata.exe yields the following:
PH20B1 WWE A %CID? 5.35.05. 1.15.00 % 4
Click to expand...
Click to collapse
Take it easy
all BA HAVE THE SAME PROBLEM AS YOU DESRIBLE
IF YOU USE WM2003 THE PROBLEM WILL DISAPPEAR~ SO，JUST SOFT RESET
YOUR PHONE EVERY TIME YOU CHANGE YOUR BETTERY！！
just one softreset, and when you need to charge, charge it when it reaches the 40%, etc, just don't take out the battery, or you will have to softreset it again for the radio work.
it is just the same with mine sx66, and i don't care at all.
Thanks for the notes...I kind of learned the soft reset 'fix' on my own, a little disappointing but I guess we're stuck with it. Why would I want to downgrade my phone to 2003? The whole point was to move to WM5 so my users and support team all work with the same interface.
Of course...my next project is to find out why SMSplus works on 8525 phones and not 8125 (standard Cingular OS load.) Might have to upgrade the 8125s to WM6 (sigh)
I have an O2 XDA Mini S - G4 model
i have sat and read how to flash this model. I have installed HardSPL, shown on boot screen as shown by the olip in the version number, i then proceeded to use MUN RUU utility and my chosen rom which was the AMP rom.
I dropped the file into my updater folder and ran the flash tool
It runs through, goes from 1 to 100%, hangs for a short time at 100% then closes and reboots the wizard. All good so far, yes?
No, the ppc reboots and starts up WM5 again and then adds all the o2 customisation.
I have tried using the TNT rom too, same problem. I have also removed HardSPL and tried using SoftSPL. Same damn thing there too, once the flash is complete it reboots and starts wm5 again.
Anyone know whats wrong?
I seem to now have the TNT boot screen, but still have WM5. lol
Heres my device info
ROM Version - 2.21.4.1 WWE
ROM Date - 3/9/06
Radio Version - 02.07.10
Protocol Version 413.1.03
ExtROM Version - 2.21.4.101
Please help me out someone. Its currently standard apart from a tnt boot screen, HardSPL is still removed.
Please Note - I dont have any errors during flashing, it all runs through like its working fine. :s
its all good, i managed to get it sorted using mUn's ShellTool
Sweet application, followed the steps and it worked fine using TNT rom
Hi all, I 've just update my Tilt to the WWE WM6.1 ROM, but after that, when I connect the Tilt with my computer & soft reset the tilt, it will hangs at startup screen, if I disconnect it & soft reset, it becomes normal, anyone has this problem too?
here is the information of my tilt:
ROM ver: 3.28.405.0 CHT <----I sure I load the WWE 6.1 ROM to it?
ROM date: 05/02/08
Radio version: 1.65.16.25
Protocol version: 25.83.40.02H
this is just the tip of the iceberg. wait until you notice other issues, especially if you were using lots of 3rd party software. core media player and skype are two very commonly used pieces of software that dont work as well. i have spent the whole of sunday torturing myself with this update.
i tried to be careful and waited until the official rom update appeared. i was patient and i thought i was wise, but it didnt help. i might have to revert back to 6.0 after a few days of testing
This should have been posted in the ROM section but anyways you need to check out this to see how pissed people are about it so dont think its just yourself
http://forum.xda-developers.com/showthread.php?p=2233188#post2233188