Related
I have searched the site and found a bunch of threads on viewing you tube vids, however there are so many post edits etc. that I can't follow which .cab etc we are supposed to be using.
I have downloaded that TCMP and the new version of flashget but still no luck.
Can someone that has a tilt please post what they are using and if it works on this thread - many thanks!!!!
I simply go the mobile version of you tube (m.ca.youtube.com). When I click on a video link the HTC Streaming application (which came with my Kaiser) starts up and plays the video. That simple.
Two notes, however;
1) Over my WiFi connection I need to configure my wifi router to put my Kaiser in the "DMZ - Demilitarized Zone" so as to allow full access to the internet. Otherwise the RTSP streaming fails and the HTC Streaming application complains about an inability to access the connection.
2) Streaming doesn't work over GPRS for me. This is most likely due to my cell phone carrier not allowing full internet access (much like when I don't have my WiFi router configured to put my Kaiser in the DMZ).
To use the "proper" YouTube, as opposed to the mobile version, you need these two .cabs:
http://forum.xda-developers.com/showpost.php?p=1850663&postcount=7
Sparrowhawk said:
To use the "proper" YouTube, as opposed to the mobile version, you need these two .cabs:
http://forum.xda-developers.com/showpost.php?p=1850663&postcount=7
Click to expand...
Click to collapse
I have both of these intstalled with duttys rom ver 4 and I still get the "failed to find network" error in streaming media when using 3g att or wifi. I used to have no problem streaming vids (besides it being really slow and chopy) over att when I was using an older duttys touchflo 6 for att.
I searched too but all I found was some blurbs about youtube changing addressed and wifi in DMZ mode (which neither seemed to apply)
but I am a tard so who knows...
moorefire said:
I have both of these intstalled with duttys rom ver 4 and I still get the "failed to find network" error in streaming media when using 3g att or wifi. I used to have no problem streaming vids (besides it being really slow and chopy) over att when I was using an older duttys touchflo 6 for att.
I searched too but all I found was some blurbs about youtube changing addressed and wifi in DMZ mode (which neither seemed to apply)
but I am a tard so who knows...
Click to expand...
Click to collapse
hey man you say you have the 2 cabs installed? but your using streaming media instead of the programs u installed. so your right for some reason streaming media opens and it dosnt work go to the real youtube site not the mobile for now and see if that works for you it dose for me it uses tcmp instead of streaming media player and works fine but your right i would rather be able to use the mobile site 2 but i havent figured out how to get it to use tcmp instead of streaming media player but give that a shot for now
jackryan57 said:
I have downloaded that TCMP and the new version of flashget but still no luck.
Click to expand...
Click to collapse
flashget??
XtreMe_G said:
flashget??
Click to expand...
Click to collapse
Sorry I meant Flashlite...my error
I downloaded those two files that the previous poster suggested, still no luck. I also tried the HTC streaming file - installed that - still no luck
Is anyone really watching you tube vids or is this whole thing some sort of practical joke that I haven't been let in on - LOL
I'm not a noob by any means, I just can't seem to get this to work.
Figures too - because AT&T just "turned on" the 3G network today in my area - I now have very fast internet speeds, but no you tube (
ok......which youtube are you browsing? the mobile one.....or the desktop one?
XtreMe_G said:
ok......which youtube are you browsing? the mobile one.....or the desktop one?
Click to expand...
Click to collapse
I have tried both to no avail I can view the videos that come on that website that gets stored locally on your device when you install the TCMP app. They play fine especially the pron
what actually happens when you click on a video link? on the mobile one and the desktop one
XtreMe_G said:
what actually happens when you click on a video link? on the mobile one and the desktop one
Click to expand...
Click to collapse
Nothing happens when I click on a vid on the mobile site - it just sits there (Opera mini) doesn't show loading - nothing.
On the desktop one it says I either don't have flash enabled, or I need the newest version - which I have
I appreciate you helping me with this - I'm sure I am not alone on this issue 0 judging by what I'm reading here
ah, try using internet explorer
Follow these steps & pay attention...
Dude, Seriously...You may have read the thread, but you really need to pay attention to what you read. FLASHGET??? FLASH LITE??? Both of these have NO IMPACT on playing flash video.
What you need is:
(A) TCPMP either .72 or .81 (You said you have)
(B) FlasVideoBundle
Instal This:
http://rapidshare.com/files/87945596/FlashVideoBundle.CAB
After installing, make sure that the following files were all copied to the TCPMP root directory (i.e. For .72 \Programs\TCPMP or \Storage Card\Programs\TCPMP or for .81 \Programs\TCPMP\Player):
DiagVL.exe
DisableVL.exe
flvffmpeg.plg
flvsplitter.plg
MenuToggle.exe
VideoLoader.dll
These files must be in the TCPMP directory! It should do it automatically if you use .72. However, for .81 you must copy the files by hand.
After insuring the files have been coppied to the right directory, then launch TCPMP & go to preferences & set the file associations for the flash video, i.e. flv)
Note: without the current version of FlashBundle Youtube will no longer work. I have attached the most current version to the link above.
AND YES, you must use either PIE or (OPERA Mobile 8.65 (NOT MINI) with the macromedia flash player 7).
GSLEON3 said:
Dude, Seriously...You may have read the thread, but you really need to pay attention to what you read. FLASHGET??? FLASH LITE??? Both of these have NO IMPACT on playing flash video.
What you need is:
(A) TCPMP either .72 or .81 (You said you have)
(B) FlasVideoBundle
Instal This:
http://rapidshare.com/files/87945596/FlashVideoBundle.CAB
After installing, make sure that the following files were all copied to the TCPMP root directory (i.e. For .72 \Programs\TCPMP or \Storage Card\Programs\TCPMP or for .81 \Programs\TCPMP\Player):
DiagVL.exe
DisableVL.exe
flvffmpeg.plg
flvsplitter.plg
MenuToggle.exe
VideoLoader.dll
These files must be in the TCPMP directory! It should do it automatically if you use .72. However, for .81 you must copy the files by hand.
After insuring the files have been coppied to the right directory, then launch TCPMP & go to preferences & set the file associations for the flash video, i.e. flv)
Note: without the current version of FlashBundle Youtube will no longer work. I have attached the most current version to the link above.
AND YES, you must use either PIE or (OPERA Mobile 8.65 (NOT MINI) with the macromedia flash player 7).
Click to expand...
Click to collapse
Dude, excuse the hell out of me...when neither the TCPMP and flashvideo bundle worked - someone suggested flash lite so I installed that as well...I don't think I EVER read where you couldn't use opera mini - thank you to you guys for pointing that out. I will try what you just posted, thanks for taking the time to help someone who obviously "didn't pay attention to what I read"
I can provide some insight, although I really new at this. I installed both cabs and can view all youtube videos through a portal site called ytpocket.com, using the search field at the top. This does not address the larger issue of how to play streaming flash videos from other websites. Specifically, on real youtube, I get the error message "youtube swf args not found" and the title bar of the error message is "VideoLoader." I have no idea what this means.
I also can't get the m.youtube.com site to play videos becuase the Real Player doesn't recognize 3gp files, and my attempts to associate these files with TCMP have apparently failed.
Hope this helps and hope someone smarter than me can solve these two problems! Thanks all.
dt, for the mobile youtube, install htc streaming media
hey, so how do i use it? when i get to it it pops up real player. is there any free program to replace it? i tried tcpmp but that did not work.
thanks
also kinda funny how they have that but windows moble cant play it
try htc streaming media
brianmay27 said:
hey, so how do i use it? when i get to it it pops up real player. is there any free program to replace it? i tried tcpmp but that did not work.
thanks
also kinda funny how they have that but windows moble cant play it
Click to expand...
Click to collapse
This has nothing to do with the device or the operating system. It has to do with having the right application.
Use TCPMP with the flash plugins available. Works like a charm.
flashvideobundle only works for the main youtube site, not the mobile youtube site.
mobile version is horrible compared to the real youtube site,that flashbundle really helps plus gives additional working sites that currently work with streaming video and more sites will be added eventually as the project develops
ok, i had this problem wit mobile youtube and cingular video, it wouldnt play and some error messages....so i feel dumb sayin this but, while the video is trying to stream check the settings (options) cuz mine was set to run off "internet" so i changed it to "My media network" and BAM there u go
but wit real player----> first in windows, show all files and sort by NAME then find the file "realplayer" and open it...then just settings and options for sources can be changed
Anyone with a quick fix to get streaming audio to continue playing after a sponsorship message/ad plays first? Both my WMP and RealAudio players work fine generally for streaming audio on the Tilt .. but on one particular site (KQED San Francisco) the site insists on playing a short sponsorship/ad message first, and then the players error out before playing the actual stream (I don't have this problem playing the stream on my laptop).
I am hopeful there is some setting I can adjust.
[you can click on the link I embedded above to see if it works on your device]
if you edit the file with note pad you get
Code:
<ASX version = "3.0">
<TITLE>KQED Radio 88.5 FM</TITLE>
<MOREINFO href = "http://www.kqed.org/" />
<AUTHOR>KQED</AUTHOR>
<COPYRIGHT>(c) 2008</COPYRIGHT>
<!--gateway-->
<ENTRY ClientSkip="yes">
<TITLE>Sponsored by Digital Foundry</TITLE>
<MOREINFO href="www.digitalfoundry.com" />
<AUTHOR>Digital Foundry</AUTHOR>
<REF href = "mms://kqedwm.streamguys.us/wm.kqed/ads/dfoundry/dfoundry20080408.wma" />
</ENTRY>
<!--end gateway-->
<ENTRY>
<TITLE>KQED Public Radio 88.5 FM</TITLE>
<MOREINFO href="http://www.kqed.org/" />
<AUTHOR>KQED</AUTHOR>
<COPYRIGHT>(c) 2008</COPYRIGHT>
<REF href="http://kqedsc01.streamguys.us:8000/" />
<REF href="http://kqedsc01.streamguys.us:80/" />
</ENTRY>
</ASX>
delete
Code:
<!--gateway-->
<ENTRY ClientSkip="yes">
<TITLE>Sponsored by Digital Foundry</TITLE>
<MOREINFO href="www.digitalfoundry.com" />
<AUTHOR>Digital Foundry</AUTHOR>
<REF href = "mms://kqedwm.streamguys.us/wm.kqed/ads/dfoundry/dfoundry20080408.wma" />
</ENTRY>
<!--end gateway-->
save the file and you should be good to go.
I tried the solution posted above, and while the edited file works fine on my PC .. it does not run on my WMP. I edited the file, saved it to my Tilt, and opened it with WMP ... I just get an error message.
Any other thoughts?
I use tcpmp 0.72 rc3 and have no problems playing this stream...
ycavan said:
I use tcpmp 0.72 rc3 and have no problems playing this stream...
Click to expand...
Click to collapse
you got a link to a cab for that?
here you go:
http://forum.xda-developers.com/showpost.php?p=2061081&postcount=1
Thank you for the link! This the only version of TCPMP that runs on WM6.1-Kaiser. It even has all the plugins installed, including AAC support! Thank you, guys!
Hi brothers & sisters,
Recently, I tried surfing youtube with my kaiser and using Opera 9.
But whenever I tried to view a video, it says either I do not have the latest flash player or my java script has not been enabled.
I downloaded the latest flash player 7 and my java script has been enabled, but still I am unable to view.
This applies to some of the application in facebook and other website.
What is the missing plugin?
What should I do?
You help and advices are very much appreciated..
Thank you!!!
Try HTC streaming Media Plug in. On HTC site
jvfowlerjr said:
Try HTC streaming Media Plug in. On HTC site
Click to expand...
Click to collapse
I tried http://www.htc.com/www/supportdownloadlist.aspx?p_id=13&act=all but still unable to find that plugin.
You won't get a plugin for OPERA as of yet!
OPERA states clearly on their BETA notice that "Browser plug-ins are disabled by default due to non-existent or incomplete system" and "Flash plugins and embedded video streaming do not work."
http://www.opera.com/products/mobile/download/
You will have to wait for a later BETA Release or for the final (commercial) version!
As already suggested by jvfowlerjr, you can use the STREAMING MEDIA PLAYER - easiest way of doing it:
Open Pocket IE, switch its view to SINGLE COLUMN, go to YOUTUBE - enjoy! The SMP will start automatically each time you click on a video.
Ok, so I am trying to stream videos from youtube through pocket IE, but every time I go to open a video, it opens in mobile real player. How do I redirect it to open in htc smp, so I can actually watch videos?
try as follow:
TCPMP0.72RC1 with FlashVideoBundle (search forums for thoose) and you will able to play streaming from IE.
If you are located in United States - then try Skyfire browser.
And next time....
SEARCH! It has been covered bazillion times.
I hit search and was directed to this. I am in the US, and do use skyfire, but it's a pain in the ass when you can simply boot up piocket ie with your homepage set to mobile youtube. I' assuming then a tilt can not do it this way, or...?
Yes, it can!
I am not sure what ROM you're running on your device? The factory WM6.1 HTC shipped ROM has the streaming media player integrated.
I have somewhere a CAB installer (taken from a ZINC II) but I am not sure if that would run on WM6.0. I also don't know if you would have to extract the CAB and copy it manually to your Tilt due restrictions in the installer (as I said: it is taken from the ZINC II on WM6.1), however, getting it on there shouldn't be hard to do! If you want to give it a try, the file is attached below!
Sorry, I had to pack it in a ZIP file, the FORUM UPLOADER did not accept it as CAB - simply extract, copy to your device and try to install! If the installation does not work, get a CAB EXTRACTOR and extract the CAB file, then copy the content to your device.
If I am violating some copyrights, please drop me a line and I gladly will remove the attached file! It is the official ArcSoft Streaming Media Player without the HTC branding. Since this player is integrated in every official WM6.1 release (which is available for all TYTN II's) I don't think that posting the file is against copyrigths.
First, click on the link in my Signature to get you the easiest and best Searching results.
Sercond, What you are looking for in Opera 9.5 is Flash 3.1, So use the plug in search for "Flash 3.1 Phouki Opera".
That should anwser all your problems when you find that thread at Development ande Hacking forum..
Cheerz, Good Luck,
PS: Flash Works.
Can someone recommend a streaming radio application for files such as Shoutcast? I cannot seem to find any, and I have also searched.
Thanks.
Resco Radio 1.90. If you do purchase it, I have modified the default skin to make it readable on VGA and to put 15 shortcut buttons on the screen instead of 10. Let me know if you need it.
If you have the stream-adress like
http://stream-hautdebit.frequence3.net:8000 or
http://house.mthN.net:8500
you can use MortPlayer.
nick007 said:
If you have the stream-adress like
http://stream-hautdebit.frequence3.net:8000 or
http://house.mthN.net:8500
you can use MortPlayer.
Click to expand...
Click to collapse
Thats a good idea. Can I make a shortcut?
Smalls2 said:
Can someone recommend a streaming radio application for files such as Shoutcast? I cannot seem to find any, and I have also searched.
Thanks.
Click to expand...
Click to collapse
www.condiuts.com
Pocket Player will do it and you don't even have to upload the links yourself. They have done the work for you. It works very nicely and Resco radio is also good. Just depends on what you want and for what. I have both and use both.
yatrg said:
Resco Radio 1.90. If you do purchase it, I have modified the default skin to make it readable on VGA and to put 15 shortcut buttons on the screen instead of 10. Let me know if you need it.
Click to expand...
Click to collapse
Could you post a picture of your skin and does it work in landscape also?
I am using the default VGA skin and it is fine, but nothing really fancy about it.
Here is an image of the modification I made to the default skin, and a zip file with the skin change. I did not modify the landscape mode, only the portrait mode. Basically, all I changed was the size of the fonts so they would be easier to read on the VGA screen, and I made 15 buttons instead of 10. Unzip the .zip file and put the default.rs file in \Program Files\Resco Pocket Radio\Skins\default_vga\
I would suggest copying the one that is there already to a temp folder first, so if you do not like mine, you can always go back.
The one problem with 15 buttons is that you get less space for names. What I did was modify the file \Program Files\Resco Pocket Radio\radios\user_presets_fast.rrd with a text editor (notepad in windows xp). There is a line in there for each button (0 through 14). A sample line is:
CAT "Cat3"
RAD "Radio (io) Classical Favorites" "io Classical Fav" "Radio (io) Classical Favorites"
STR "http://cast.voxcdn.net:8000/2917-MP3-RadioIO-Classical-Favs-128" "128" "MP3" a
END
END
The middle name of the three names in quotes is the display name on the button, so I edited it to be a shorter name. This is "Cat3" which means it is button 4 - or the first button on row 2.
I use the free version of kinoma which has no expiry, it works perfectly with all shoutcast and is searchable so all you have to put into it's search is either the name of the station you want or the genre of music.
It is excellent and pretty much trumps everything mentioned here when you factor in the price
How about Pandora? There's a cab floating around for that! It's not pretty (in VGA) but works...
Use MortPlayer, simply put yourself an m3u together, like:
#EXTM3U
#EXTINF:-1,ETN.fm Ch1 256k
http://192.87.65.61:8100
#EXTINF:-1,ETN.fm Ch2 256k
http://192.87.65.61:8200
#EXTINF:-1,.977 The 80s Channel
http://scfire-dtc-aa05.stream.aol.com:80/stream/1040
#EXTINF:-1,.977 The Hitz Channel
http://scfire-mtc-aa02.stream.aol.com:80/stream/1074
and save it on your device or storage card.
Afterwards, add the m3u to your favorites, this way you can slide through your collection and all stations will become another playlist/album.
RiWaLE said:
Use MortPlayer, simply put yourself an m3u together, like:
#EXTM3U
#EXTINF:-1,ETN.fm Ch1 256k
http://192.87.65.61:8100
Click to expand...
Click to collapse
That's cool, thanks! Can mort, or any other player besides wmp, play mms streams? I'd love to stream mms://wmc1.liquidviewer.net/wpya on something other than wmp, but can't figure out how to do it. I've tried mort and pocketplayer.
midi1969 said:
That's cool, thanks! Can mort, or any other player besides wmp, play mms streams? I'd love to stream mms://wmc1.liquidviewer.net/wpya on something other than wmp, but can't figure out how to do it. I've tried mort and pocketplayer.
Click to expand...
Click to collapse
I use TCPMP - works nicely, loads fast -
midi1969 said:
That's cool, thanks! Can mort, or any other player besides wmp, play mms streams? I'd love to stream mms://wmc1.liquidviewer.net/wpya on something other than wmp, but can't figure out how to do it. I've tried mort and pocketplayer.
Click to expand...
Click to collapse
Try adding the mms as a regular stream, you can do so under favorites. Or try adding it in the m3u. Besides: If you open a station in Winamp you get many servers sorted by their webload. So if you copy only one, like i did, you may lose it someday. This never happened to me, just as a hint.
I'm particulary looking for a way to download the pls with the servers generated by the station as you listen into it and add it as a new favorite. Maybe it is possible to link mortplayer directly to the pls. I will try this on my way to work.
Edit: If you run into trouble, because your 3G-Provider is BLOCKING the stream after a couple of minutes try to open a vpn-connection to your home or office-server and route your webradio-traffic through it.
RiWaLE said:
I'm particulary looking for a way to download the pls with the servers generated by the station as you listen into it and add it as a new favorite. Maybe it is possible to link mortplayer directly to the pls. I will try this on my way to work.
Click to expand...
Click to collapse
Well, that didn't work, i'll ask in the mortplayer forums ... You can add the generated m3u as a link (fe http://etn.fm/playlists/etn2beta.m3u) and the "loading favorites structure" screen loads a bit longer, but no success, it doesn't show up.
Edit: Works now! Trying to set up a php script now that simply includes the server m3u's...